PDN-ADSL-LINE-EXT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
7
Rows
7
Columns
54
pdnAdslLineExtTable
table.1.3.6.1.4.1.1795.2.24.2.6.24.1.1
·
1 row entry
·
11 columns
This table extends the adslLineTable in support of an
ADSL Line object.
The objects pdnAdslLineTransAtucCap, pdnAdslLineTrans-
AtucConfig, and pdnAdslLineTransAtucActual exist along
with their PdnAdslTransmissionModeType TC because the
AdslTransmissionModeType defined in the ADSL-LINE-EXT-MIB
does not include the ADSL2/ADSL2plus bits defined in
ITU G.997.1 (05/2003) ATU Transmission System Enabling (ATSE)
section.
When using the objects defined in this MIB with a syntax of
type PdnAdslTransmissionModeType, the interworking relationship
between these objects and the objects defined in the ADSL-LINE-
EXT-MIB defined with a syntax of type AdslTransmissionModeType
must be considered and explained in an implementation-specific
document such as an Operational Specification. Note that the
PdnAdslTransmissionModeType is a super set of the AdslTransmis-
sionModeType. One possible implementation could be as follows:
1. Both objects of syntax AdslTransmissionModeType defined
in the ADSL-LINE-EXT-MIB and objects of syntax PdnAdsl-
TransmissionModeType defined in this MIB are supported.
By supporting both, a manager with the ADSL-LINE-EXT-MIB
loaded could manage the device with the restriction of
not being able to utilize ADSL2/ADSL2plus modes.
2. When the ADSL2/ADSL2plus capabilities are desired, a manager
would have to use the objects defined in this MIB to
configure the transmission modes, read capability, or
read the actual transmission mode of the ATU-C.
3. The transmission mode that the ATU-C is currently
configured for is based on the last object, adslLineTrans-
AtucConfig or pdnAdslLineTransAtucConfig, that was written.
An extended entry in the adslLineTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pdnAdslLineTransAtucCap
The transmission modes, represented by a bitmask that the
ATU-C is capable of supporting. The modes available are limited by the design of the equipment. |
PdnAdslTransmissionModeType Textual Convention: PdnAdslTransmissionModeType BitsType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineTransAtucConfig
The transmission modes, represented by a bitmask, currently
enabled by the ATU-C. The manager can only set those modes that are supported by the ATU-C. An ATU-C's supported modes are provided by pdnAdslLineTransAtuc… |
PdnAdslTransmissionModeTyper/w Textual Convention: PdnAdslTransmissionModeType BitsType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineTransAtucActual
The actual transmission mode of the ATU-C. During ADSL line
initialization, the ADSL Transceiver Unit Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmi… |
PdnAdslTransmissionModeType Textual Convention: PdnAdslTransmissionModeType BitsType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLinePowerManagementConfig
This object enables or disables power management functionality.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineSpectrumProfile
The value of this object identifies the row in the ADSL
Line Spectrum Profile Table, pdnAdslLineSpectrumProfileTable, which applies for this ADSL line. If this object is not a zero-length string, it should default to th… |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLinePmMode
The line states the ATU-C or ATU-R may autonomously transition
to on this line. It is coded in a bit-map representation (0 if not allowed, 1 if allowed) as follows: idleStateL3(0) - Bit 0 L3 state (Idle state) … |
Bitsr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineL0Time
The minimum time, in seconds, between and Exit from the L2 state
and the next Entry into the L2 state. |
secondsUnsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineL2Time
The minimum time, in seconds, between an Entry into the L2 state
and the first Power Trim in the L2 state and between two con- secutive Power Trims in the L2 State. |
secondsUnsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineL2Atpr
The maximum aggregate transmit power reduction, in dB, that can
be performed through a single Power Trim in the L2 state. At the time this MIB was produced, the upper limit for this object was not updated… |
dBUnsigned32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineLdsf
Defines whether the line should be forced into the loop
diagnostics mode by the near-end ATU on this line. ldsfMode0(1) - 0: Inhibits the near-end ATU from performing loop diagnostics mode proc… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
pdnAdslLineL2Atprt
This parameter represents the total maximum aggregate transmit
power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e., at transition of L0 to L2 state) and Po… |
dBUnsigned32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.11 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2
·
1 row entry
·
5 columns
This table contains specific configuration of transmission spectrum and power spectral density related parameters that can be mapped to one of the ADSL lines.
Each entry contains a specific profile for transmission
spectrum and power spectral density related parameters.
A default profile with an index of `DEFVAL', will always
exist and its parameters will be set to vendor or …
spectrum and power spectral density related parameters.
A default profile with an index of `DEFVAL', will always
exist and its parameters will be set to vendor or …
Indexes
pdnAdslLineSpectrumProfileName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pdnAdslLineSpectrumProfileName
This object identifies a row in the pdnAdslLineSpectrumProfile-
Table. The system will always provide a default profile whose name is `DEFVAL'. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.1 |
||||||||||||
|
pdnAdslLineSpectrumProfileRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. A profile is activated by setting this object to `valid'. Before a profile can be deleted or taken out of service… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.2 |
||||||||||||
|
pdnAdslLineSpectrumModeSpecificPsdProfile
The value of this object identifies the row(s) in the ADSL
Mode-Specific PSD Configuration Table, pdnAdslModeSpecific- PsdConfTable, which applies for this Line Spectrum Profile. A particular ADSL line ma… |
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.3 |
||||||||||||
|
pdnAdslLineSpectrumAtucCarMaskProfile
This object identifies one or more rows in the pdnAdslCarMaskTable.
The pdnAdslCarMaskTable is a table containing a list of subcarriers to be masked in the downstream or upstream direction; the profile in the pdAdslCa… |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.4 |
||||||||||||
|
pdnAdslLineSpectrumAturCarMaskProfile
This object identifies one or more rows in the pdnAdslCarMaskTable.
The pdnAdslCarMaskTable is a table containing a list of subcarriers to be masked in the downstream or upstream direction; the profile in the pdAdslCa… |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.2.1.5 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3
·
1 row entry
·
4 columns
This table binds an entry indexed by a specific ADSL type or flavor (e.g. ADSL2 or ADSL2+) and indexed by a profile name to a specific DSL PSD Configuration Profile.
An entry in the table. For each particular ADSL mode or
flavor supported (pdnAdslMOdeSpecificPsdConfAdslMode), there
will be an entry that points to an entry in the ADSL PSD
Configuration Table (pdnAdslPsdConfTable). F…
flavor supported (pdnAdslMOdeSpecificPsdConfAdslMode), there
will be an entry that points to an entry in the ADSL PSD
Configuration Table (pdnAdslPsdConfTable). F…
Indexes
pdnAdslModeSpecificPsdConfProfileName pdnAdslModeSpecificPsdConfAdslMode
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pdnAdslModeSpecificPsdConfProfileName
This object identifies a row in the pdnAdslModeSpecificPsdConfTable.
The system will always provide a default profile whose name is 'DEFVAL'. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.1 |
||||||||||||
|
pdnAdslModeSpecificPsdConfAdslMode
This object identifies a row in the pdnAdslModeSpecificPsdConfTable
containing parameters specific to a particular ADSL mode or flavor identified by this object. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.2 |
||||||||||||
|
pdnAdslModeSpecificPsdConfRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. A profile is activated by setting this object to `valid'. Before a profile can be deleted or taken out of service… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.3 |
||||||||||||
|
pdnAdslModeSpecificPsdConfAdslPsdConfProfile
This object identifies a row in the ADSL PSD Configuration
Table, pdnAdslPsdConfTable. |
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.3.1.4 |
pdnAdslPsdConfTable
table.1.3.6.1.4.1.1795.2.24.2.6.24.1.4
·
1 row entry
·
7 columns
This table contains power spectral density settings.
Each entry contains specific power spectral density settings for
a particular profile. A default profile for each particular
ADSL mode or flavor supporting PSD configuration will exist
(See the pdnAdslModeSpecificPsdCon…
a particular profile. A default profile for each particular
ADSL mode or flavor supporting PSD configuration will exist
(See the pdnAdslModeSpecificPsdCon…
Indexes
pdnAdslPsdConfProfileName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pdnAdslPsdConfProfileName
This object identifies a row in the pdnAdslPsdConfTable.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.1 |
||||||||||||
|
pdnAdslPsdConfRowStatus
This object is used to create a new row or modify or delete an
existing row in this table. A profile is activated by setting this object to `valid'. Before a profile can be deleted or taken out of service… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.2 |
||||||||||||
|
pdnAdslPsdConfAtucMaxNomPsd
Represents the Maximum nominal transmit PSD for the ATU-C.
The values range from -80 to -40 dBm/Hz in 0.1 dB steps. |
tenth dBm/HzInteger32r/w Constraints: range: -800--400 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.3 |
||||||||||||
|
pdnAdslPsdConfAturMaxNomPsd
Represents the Maximum nominal transmit PSD for the ATU-R.
The values range from -65 to -38 dBm/Hz in 0.1 dB steps. |
tenth dBm/HzInteger32r/w Constraints: range: -650--380 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.4 |
||||||||||||
|
pdnAdslPsdConfAtucMaxNomAtp
Represents the Maximum nominal aggregate transmit power for
the ATU-C. The values range from 0 to 25.5 dBm in 0.1 dB steps. |
tenth dBmUnsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.5 |
||||||||||||
|
pdnAdslPsdConfAturMaxNomAtp
Represents the Maximum nominal aggregate transmit power for
the ATU-R. The values range from 0 to 25.5 dBm in 0.1 dB steps. |
tenth dBmUnsigned32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.6 |
||||||||||||
|
pdnAdslPsdConfAtucMaxRxPwr
Represents the maximum upstream aggregate receive power over a
set of subcarriers (in dBm). The ATU-C shall request an upstream power cutback such that the upstream aggregate receive power over that set of subcarriers i… |
tenth dBmInteger32r/w Constraints: range: -255-255range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.4.1.7 |
pdnAdslCarMaskTable
table.1.3.6.1.4.1.1795.2.24.2.6.24.1.5
·
1 row entry
·
4 columns
This table contains a list of subcarriers that are to be masked (i.e. not transmitted). Subcarriers that are not entries in this table are not masked.
Each entry represents a specific subcarrier that is masked
for a particular profile.
for a particular profile.
Indexes
pdnAdslCarMaskProfileName pdnAdslCarMaskSubCarrierIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
pdnAdslCarMaskProfileName
This object identifies a row in the pdnAdslCarMaskTable
based on a profile name. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.1 |
||||||||||||
|
pdnAdslCarMaskSubCarrierIndex
This object identifies a row in the pdnAdslCarMaskTable
based on subcarrier that is being masked. The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1 (NSC is Number of Subcarriers) as specified in G.997.1 where N… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.2 |
||||||||||||
|
pdnAdslCarMaskRowStatus
This object is used to create a new row or delete an existing
row in this table. A row is activated by setting this object to active(1). |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.3 |
||||||||||||
|
pdnAdslCarMaskSubCarrierStatus
This object provides a clear indication that the subcarrier
is masked. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.1795.2.24.2.6.24.1.5.1.4 |
pdnAdslLineStatusTable
table.1.3.6.1.4.1.1795.2.24.2.6.24.1.6
·
1 row entry
·
10 columns
This table contains current line status measurements.
Each entry represents an interface.
i.e. a row in the ifTable.
i.e. a row in the ifTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
pdnAdslLineStatusAtucLineAtn
The measured difference in the total power transmitted by
the ATU-C and the total power received by the ATU-R over all subcarriers during diagnostics mode and initialization. The value 2048 is a special value and indi… |
tenth dBUnsigned32 Constraints: range: 0-1270range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.1 |
|
pdnAdslLineStatusAturLineAtn
The measured difference in the total power transmitted by
the ATU-R and the total power received by the ATU-C over all subcarriers during diagnostics mode and initialization. The value 2048 is a special value and ind… |
tenth dBUnsigned32 Constraints: range: 0-1270range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.2 |
|
pdnAdslLineStatusAtucSignalAtn
The measured difference in the total power transmitted by
the ATU-C and the total power received by the ATU-R over all subcarriers during showtime. The value 2048 is a special value and indicates the line attenuation … |
tenth dBUnsigned32 Constraints: range: 2048-2048range: 0-1270 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.3 |
|
pdnAdslLineStatusAturSignalAtn
The measured difference in the total power transmitted by
the ATU-R and the total power received by the ATU-C over all subcarriers during showtime. The value 2048 is a special value and indicates the line attenuation … |
tenth dBUnsigned32 Constraints: range: 0-1270range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.4 |
|
pdnAdslLineStatusAtucSnrMgn
The upstream signal-to-noise ratio margin is the increase
in dB of the noise power received at the ATU-R, such that the BER requirements are met for all upstream bearer channels. The value 2048 is a special value and… |
tenth dBInteger32 Constraints: range: -640-630range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.5 |
|
pdnAdslLineStatusAturSnrMgn
The downstream signal-to-noise ratio margin is the increase
in dB of the noise power received at the ATU-C, such that the BER requirements are met for all upstream bearer channels. The value 2048 is a special value a… |
tenth dBInteger32 Constraints: range: -640-630range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.6 |
|
pdnAdslLineStatusAtucMaxAttainableLineRate
The maximum downstream net data rate currently attainable
by the ATU-C transmitter and the ATU-R receiver. |
bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.7 |
|
pdnAdslLineStatusAturMaxAttainableLineRate
The maximum upstream net data rate currently attainable
by the ATU-R transmitter and the ATU-C receiver. |
bpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.8 |
|
pdnAdslLineStatusAtucActAtp
The total amount of transmit power delivered by the ATU-C
at the U-R reference point, at the instant of the measurement. The value 2048 is a special value and indicates the parameter is out of range to be represented. |
tenth dBmInteger32 Constraints: range: -310-310range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.9 |
|
pdnAdslLineStatusAturActAtp
The total amount of transmit power delivered by the ATU-R
at the U-R reference point, at the instant of the measurement. The value 2048 is a special value and indicates the parameter is out of range to be represented. |
tenth dBmInteger32 Constraints: range: -310-310range: 2048-2048 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.6.1.10 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7
·
1 row entry
·
13 columns
This table contains current line status measurements.
Each entry represents an interface.
i.e. a row in the ifTable.
Some objects in this table are only valid if a loop diagnostic
has successfully completed. Those objects will return a
noSuchName for a Get o…
i.e. a row in the ifTable.
Some objects in this table are only valid if a loop diagnostic
has successfully completed. Those objects will return a
noSuchName for a Get o…
Indexes
IF-MIBifIndex pdnAdslLineCarrierIndex
| Column | Syntax | OID |
|---|---|---|
|
pdnAdslLineCarrierIndex
Identifies a row in the table based on a subcarrier.
The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1 (NSC is Number of Subcarriers) as specified in G.997.1 where NSCds is the higher subcarrier that can be t… |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1 |
|
pdnAdslLineSubCarAtucHlinPs
The downstream linear representation, Hlin(f), of the
Channel Characteristics Function, H(f). This value is only available after a loop diagnostic procedure. The special value -32768 indicates that no measurement c… |
Integer32 Constraints: range: -32768-32767 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.2 |
|
pdnAdslLineSubCarAturHlinPs
The upstream linear representation, Hlin(f), of the
Channel Characteristics Function, H(f). This value is only available after a loop diagnostic procedure. The special value -32768 indicates that no measurement cou… |
Integer32 Constraints: range: -32768-32767 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.3 |
|
pdnAdslLineSubCarAtucHlogMt
The number of symbols used to measure downstream H(f)
logarithmic measurement values. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It s… |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.4 |
|
pdnAdslLineSubCarAturHlogMt
The number of symbols used to measure downstream H(f)
logarithmic measurement values. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It s… |
Unsigned32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.5 |
|
pdnAdslLineSubCarAtucQlnPs
Downstream Quiet Line Noise. The special value 255
indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power Spectral Density (PSD) is out of the range t… |
dBUnsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.6 |
|
pdnAdslLineSubCarAturQlnPs
Upstream Quiet Line Noise. The special value 255
indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power spectral density (PSD) is out of the range to … |
dBUnsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.7 |
|
pdnAdslLineSubCarAtucSnrPs
Downstream Signal-to-Noise Ratio. The special value 255
indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power spectral density (PSD) is out of the ra… |
dBUnsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.8 |
|
pdnAdslLineSubCarAturSnrPs
Upstream Signal-to-Noise Ratio. The special value 255
indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise power spectral density (PSD) is out of the rang… |
dBUnsigned32 Constraints: range: 0-255 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.9 |
|
pdnAdslLineSubCarAtucBitsPs
Downstream bits allocation.
|
BitsUnsigned32 Constraints: range: 0-15 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.10 |
|
pdnAdslLineSubCarAturBitsPs
Upstream bits allocation.
|
BitsUnsigned32 Constraints: range: 0-15 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.11 |
|
pdnAdslLineSubCarAtucHlogPs
The downstream logarithmic representation, Hlog(f), of
the Channel Characteristics function, H(f), providing magnitude values. The special value 1023 indicates that no measurement could be done for the subcarrier b… |
dBUnsigned32 Constraints: range: 0-1023 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.12 |
|
pdnAdslLineSubCarAturHlogPs
The upstream logarithmic representation, Hlog(f), of
the Channel Characteristics function, H(f), providing magnitude values. The special value 1023 indicates that no measurement could be done for the subcarrier bec… |
dBUnsigned32 Constraints: range: 0-1023 |
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.13 |