pdnAdslLineTransAtucActual

PDN-ADSL-LINE-EXT-MIB · .1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.3
MIB view Table view

Object

column PdnAdslTransmissionModeType 
The actual transmission mode of the ATU-C. During ADSL line 
initialization, the ADSL Transceiver Unit Remote terminal 
end (ATU-R) will determine the mode used for the link. This 
value will be limited a single transmission mode that is a 
subset of those modes enabled by the ATU-C and denoted by
pdnAdslLineTransAtucConfig. After an initialization has 
occurred, its mode is saved as the `Current' mode and is 
persistent should the link go down. This object returns 0 
(i.e. BITS with no mode bit set) if the mode is not known.

Context

MIB
PDN-ADSL-LINE-EXT-MIB
OID
.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.3
Type
column
Access
readonly
Status
current
Parent
pdnAdslLineExtEntry
Table
pdnAdslLineExtTable
Siblings
10

Syntax

PdnAdslTransmissionModeType
Source
PdnAdslTransmissionModeType
Base type
Bits

Values & Constraints

Type Values
0ansit1413
1etsi
2q9921PotsNonOverlapped
3q9921PotsOverlapped
4q9921IsdnNonOverlapped
5q9921isdnOverlapped
6q9921tcmIsdnNonOverlapped
7q9921tcmIsdnOverlapped
8q9922potsNonOverlapeed
9q9922potsOverlapped
10q9922tcmIsdnNonOverlapped
11q9922tcmIsdnOverlapped
12q9921tcmIsdnSymmetric
13reservedBit13
14reservedBit14
15reservedBit15
16reservedBit16
17reservedBit17
18q9923potsNonOverlapped
19q9923potsOverlapped
20q9923isdnNonOverlapped
21q9923isdnOverlapped
22reservedBit22
23reservedBit23
24q9924potsNonOverlapped
25q9924potsOverlapped
26reservedBit26
27reservedBit27
28q9923DigitalNonOverlappedI
29q9923DigitalOverlappedI
30q9923DigitalNonOverlappedJ
31q9923DigitalOverlappedJ
32q9924DigitalNonOverlappedI
33q9924DigitalOverlappedI
34q9923ReachExtOverPotsMode1L
35q9923ReachExtOverPotsMode2L
36q9923ReachExtOverPotsMode3L
37q9923ReachExtOverPotsMode4L
38q9923ExtUpOverPotsNonOverlappedM
39q9923ExtUpOverPotsOverlappedM
40q9925potsNonOverlapped
41q9925potsOverlapped
42q9925isdnNonOverlapped
43q9925isdnOverlapped
44reserved44
45reserved45
46q9925DigitalNonOverlappedI
47q9925DigitalOverlappedI
48q9925DigitalNonOverlappedJ
49q9925OverlappedJ
50q9925ExtUpOverPotsNonOverlappedM
51q9925ExtUpOverPotsOverlappedM
52reservedBit52
53reservedBit53
54reservedBit54
55reservedBit55

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
pdnAdslLineTransAtucCap
The transmission modes, represented by a bitmask that the ATU-C is capable of supporting. The modes available are limited by the design of the equipment.
columnPdnAdslTransmissionModeType.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.1
pdnAdslLineLdsf
Defines whether the line should be forced into the loop diagnostics mode by the near-end ATU on this line. ldsfMode0(1) - 0: Inhibits the near-end ATU from performing loop …
columnEnumeration.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.10
pdnAdslLineL2Atprt
This parameter represents the total maximum aggregate transmit power reduction (in dB) that can be performed in an L2 state. This is the sum of all reductions of L2 Request (i.e.,…
columndB Unsigned32.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.11
pdnAdslLineTransAtucConfig
The transmission modes, represented by a bitmask, currently enabled by the ATU-C. The manager can only set those modes that are supported by the ATU-C. An ATU-C's supported mod…
columnPdnAdslTransmissionModeType.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.2
pdnAdslLinePowerManagementConfig
This object enables or disables power management functionality.
columnEnumeration.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.4
pdnAdslLineSpectrumProfile
The value of this object identifies the row in the ADSL Line Spectrum Profile Table, pdnAdslLineSpectrumProfileTable, which applies for this ADSL line. If this object is not a zer…
columnOctetString.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.5
pdnAdslLinePmMode
The line states the ATU-C or ATU-R may autonomously transition to on this line. It is coded in a bit-map representation (0 if not allowed, 1 if allowed) as follows: idleStateL…
columnBits.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.6
pdnAdslLineL0Time
The minimum time, in seconds, between and Exit from the L2 state and the next Entry into the L2 state.
columnseconds Unsigned32.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.7
pdnAdslLineL2Time
The minimum time, in seconds, between an Entry into the L2 state and the first Power Trim in the L2 state and between two con- secutive Power Trims in the L2 State.
columnseconds Unsigned32.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.8
pdnAdslLineL2Atpr
The maximum aggregate transmit power reduction, in dB, that can be performed through a single Power Trim in the L2 state. At the time this MIB was produced, the upp…
columndB Unsigned32.1.3.6.1.4.1.1795.2.24.2.6.24.1.1.1.9