pdnAdslLineSubCarStatusEntry
PDN-ADSL-LINE-EXT-MIB ·
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1
Object
row
Each entry represents an interface.
i.e. a row in the ifTable.
Some objects in this table are only valid if a loop diagnostic
has successfully completed. Those objects will return a
noSuchName for a Get or Get Next operation if no loop diagnostic
has completed.
Context
- MIB
- PDN-ADSL-LINE-EXT-MIB
- OID
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1- Type
- row
- Status
- current
- Parent
- pdnAdslLineSubCarStatusTable
- Table
- pdnAdslLineSubCarStatusTable
- Children
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pdnAdslLineCarrierIndex Identifies a row in the table based on a subcarrier.
The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1
(NSC is Number of Subcarriers) as specified in G.997.1
where NSCds… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1 |
| pdnAdslLineSubCarAtucBitsPs Downstream bits allocation. | column | Bits Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.10 |
| pdnAdslLineSubCarAturBitsPs Upstream bits allocation. | column | Bits Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.11 |
| pdnAdslLineSubCarAtucHlogPs The downstream logarithmic representation, Hlog(f), of
the Channel Characteristics function, H(f), providing
magnitude values. The special value 1023 indicates
that no measure… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.12 |
| pdnAdslLineSubCarAturHlogPs The upstream logarithmic representation, Hlog(f), of
the Channel Characteristics function, H(f), providing
magnitude values. The special value 1023 indicates
that no measureme… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.13 |
| pdnAdslLineSubCarAtucHlinPs The downstream linear representation, Hlin(f), of the
Channel Characteristics Function, H(f). This value is
only available after a loop diagnostic procedure. The
special valu… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.2 |
| pdnAdslLineSubCarAturHlinPs The upstream linear representation, Hlin(f), of the
Channel Characteristics Function, H(f). This value is
only available after a loop diagnostic procedure. The
special value … | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.3 |
| pdnAdslLineSubCarAtucHlogMt The number of symbols used to measure downstream H(f)
logarithmic measurement values. After a loop
diagnostic procedure, this parameter shall contain the
number of symbols used t… | column | Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.4 |
| pdnAdslLineSubCarAturHlogMt The number of symbols used to measure downstream H(f)
logarithmic measurement values. After a loop
diagnostic procedure, this parameter shall contain the
number of symbols used t… | column | Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.5 |
| pdnAdslLineSubCarAtucQlnPs Downstream Quiet Line Noise. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that
the noise power Spect… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.6 |
| pdnAdslLineSubCarAturQlnPs Upstream Quiet Line Noise. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that
the noise power spectra… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.7 |
| pdnAdslLineSubCarAtucSnrPs Downstream Signal-to-Noise Ratio. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the
noise power… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.8 |
| pdnAdslLineSubCarAturSnrPs Upstream Signal-to-Noise Ratio. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the
noise power s… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| IF-MIBifIndex A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously
starting from 1. The value for each interface sub-layer
must remai… | column | InterfaceIndex | .1.3.6.1.2.1.2.2.1.1 |
| pdnAdslLineCarrierIndex Identifies a row in the table based on a subcarrier.
The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1
(NSC is Number of Subcarriers) as specified in G.997.1
where NSCds… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1 |