pdnAdslLineCarrierIndex
PDN-ADSL-LINE-EXT-MIB ·
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1
Object
column
SNMPv2-SMIUnsigned32
Identifies a row in the table based on a subcarrier. The subcarrier index ranges from 0 to (NSCds-1 or NSCus-1 (NSC is Number of Subcarriers) as specified in G.997.1 where NSCds is the higher subcarrier that can be transmitted in the downstream direction and NSCus is the higher subcarrier that can be transmitted in the upstream direction. Please refer to the corresponding ITU recommendation for specific values of NSCds and NSCus. The `ADSL Values for NSC' comment above lists those recommendations.
Context
- MIB
- PDN-ADSL-LINE-EXT-MIB
- OID
.1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- pdnAdslLineSubCarStatusEntry
- Table
- pdnAdslLineSubCarStatusTable
- Siblings
- 12
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pdnAdslLineSubCarAtucBitsPs Downstream bits allocation. | column | Bits Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.10 |
| pdnAdslLineSubCarAturBitsPs Upstream bits allocation. | column | Bits Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.11 |
| pdnAdslLineSubCarAtucHlogPs The downstream logarithmic representation, Hlog(f), of
the Channel Characteristics function, H(f), providing
magnitude values. The special value 1023 indicates
that no measure… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.12 |
| pdnAdslLineSubCarAturHlogPs The upstream logarithmic representation, Hlog(f), of
the Channel Characteristics function, H(f), providing
magnitude values. The special value 1023 indicates
that no measureme… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.13 |
| pdnAdslLineSubCarAtucHlinPs The downstream linear representation, Hlin(f), of the
Channel Characteristics Function, H(f). This value is
only available after a loop diagnostic procedure. The
special valu… | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.2 |
| pdnAdslLineSubCarAturHlinPs The upstream linear representation, Hlin(f), of the
Channel Characteristics Function, H(f). This value is
only available after a loop diagnostic procedure. The
special value … | column | Integer32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.3 |
| pdnAdslLineSubCarAtucHlogMt The number of symbols used to measure downstream H(f)
logarithmic measurement values. After a loop
diagnostic procedure, this parameter shall contain the
number of symbols used t… | column | Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.4 |
| pdnAdslLineSubCarAturHlogMt The number of symbols used to measure downstream H(f)
logarithmic measurement values. After a loop
diagnostic procedure, this parameter shall contain the
number of symbols used t… | column | Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.5 |
| pdnAdslLineSubCarAtucQlnPs Downstream Quiet Line Noise. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that
the noise power Spect… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.6 |
| pdnAdslLineSubCarAturQlnPs Upstream Quiet Line Noise. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that
the noise power spectra… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.7 |
| pdnAdslLineSubCarAtucSnrPs Downstream Signal-to-Noise Ratio. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the
noise power… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.8 |
| pdnAdslLineSubCarAturSnrPs Upstream Signal-to-Noise Ratio. The special value 255
indicates that no measurement could be done for the
subcarrier because it is out of the passband or that the
noise power s… | column | dB Unsigned32 | .1.3.6.1.4.1.1795.2.24.2.6.24.1.7.1.9 |