OMNITRON-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
30
Rows
30
Columns
295

ostInterfaceTable

table
.1.3.6.1.4.1.7342.7.1.1.1 · 1 row entry · 25 columns
Open in standard view 
This table supports Interface configuration.
ostInterfaceEntry entry .1.3.6.1.4.1.7342.7.1.1.1.1
This is an Interface table entry.
Indexes
ostInterfaceIndex
Column Syntax OID
ostInterfaceIndex
Chassis, module and port indices to which this interface belongs.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
 .1.3.6.1.4.1.7342.7.1.1.1.1.1
ostInterfacePortName
The identifier associated with this interface.
OctetStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.7342.7.1.1.1.1.2
ostInterfaceType
The interface type, UNI or NNI, associated with this interface.
Enumerationr/w
Enumerated Values:
0undefined
1nni
2uni
 .1.3.6.1.4.1.7342.7.1.1.1.1.3
ostInterfaceComponentID
Component ID to which the port is assigned.
Unsigned32
Constraints:
range: 1-8
 .1.3.6.1.4.1.7342.7.1.1.1.1.4
ostInterfaceSfpMode
Set the SFP mode.
undefined = no SFP (read only)
auto = examines diagnostic SFP ROM for speed & mode
force100 = forces 100 Mbps SERDES mode
force1000 = forces 1000 Mbps SERDES mode
sgmii = forces sfp to SGMII …
Enumerationr/w
Enumerated Values:
0undefined
1auto
2force100
3force1000
4sgmii
 .1.3.6.1.4.1.7342.7.1.1.1.1.5
ostInterfaceCfmEnable
Enable CFM on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.1.1.6
ostInterfaceCommittedEgressInformationRate
Committed Egress Information Rate in kb/sec.

The maximum value and default for 10G ports is 10000000.
The maximum value and default for 1G ports is 1000000.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.7342.7.1.1.1.1.7
ostInterfaceQueueType
Egress queue type. This object is deprecated.
Enumerationr/w
Enumerated Values:
0undefined
1fairweight
2starving
 .1.3.6.1.4.1.7342.7.1.1.1.1.8
ostInterfaceLpbkEnable
Enable loopback on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.1.1.9
ostInterfaceRstpMacLearning
RSTP MAC learning setting. Default setting is on.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.7342.7.1.1.1.1.10
ostInterfacePauseEnable
Enable Pause on this port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.1.1.11
ostInterfacePort
The port associated with this interface.
OctetString
Constraints:
range: 0-14
 .1.3.6.1.4.1.7342.7.1.1.1.1.12
ostInterfaceRJ45Mode
The RJ45 mode for the port in a bit encoded value.
bit0 : 0 = Auto Negotiation, 1 = Manual
bit1 : 0 = 1000, 1 = 10/100
bit2 : 0 = 100, 1 = 10
bit3 : 0 = Full Duplex, 1 = Half Duplex
This object is valid for RJ45 ports o…
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.7342.7.1.1.1.1.13
ostInterfaceUnkEnable
*** This object is deprecated ***

Writing this object will have no effect.

Enable Unknown CFM PDU tunneling on this port.
True = enable
False = disable
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.1.1.14
ostInterfaceMTU
The ports ingress frame size. For the GM3, GM4, and GM4-PoE the
maximum frame size is 10240 bytes. For the XM5 the maximum frame
size is 10056 bytes.

The ports mgt1 and mgt2 are fixed to a frame size of 2…
Integer32r/w
Constraints:
range: 64-10240
 .1.3.6.1.4.1.7342.7.1.1.1.1.15
ostInterfaceTransmitDisable
Enable/Disable the port transmission.
True = transmission is disabled
False = transmission is enabled

For a laser light is enabled/disabled.
For a copper port electrical transmission is enabled/disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.1.1.16
ostInterfaceAlsEnable
Enable/Disable the auto link shutdown for the selected port.
True = Auto link shutdown is enabled
False = Auto link shutdown is disabled
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.1.1.17
ostInterfaceEgressSchedulingProfileId
The index of the Scheduling profile associated for the selected port.
OMNITRON-TC-MIBOstEgressSchedulingProfileIndexTyper/w
Textual Convention: OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType Unsigned32
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.7342.7.1.1.1.1.18
ostInterfaceLoopTimeout
The ports loopback timeout in seconds.

0 disables the timeout.
The default value is 30 seconds
Integer32r/w
Constraints:
range: 0-3600
 .1.3.6.1.4.1.7342.7.1.1.1.1.19
ostInterfaceLldpSelection
This object indicates the LLDP port selection type.

undefined(0) Port LLDP type is undefined or unknown
standard(1) Port is a standard LLDP port type
dpoe(2) Port is an enhan…
Enumerationr/w
Enumerated Values:
0undefined
1standard
2dpoe
3dpoeAuto
 .1.3.6.1.4.1.7342.7.1.1.1.1.20
ostInterfaceMirrorPortNumber
This object indicates that the selected port, portnum, is acting
as a mirror port for the portMirrorPortNumber.

A value of '0' indicates normal port operation (no mirroring)
for portnum. A non-zero value …
OMNITRON-TC-MIBOstPortNumberr/w
Textual Convention: OMNITRON-TC-MIBOstPortNumber Unsigned32
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.7.1.1.1.1.21
ostInterfaceMirrorRatio
This object sets the ratio of frames from the mirror port to the
listening port. For instance a value of '100' would send 1 out of 100
Ethernet frames to the mirror listening port. A value of '1' sends all
the frames to…
Integer32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.7342.7.1.1.1.1.22
ostInterfaceThresholdViolation
This object sets the interface utilization threshold value expressed
in milli-percent, where 1 indicates 0.001 percent. A threshold
violation is declared when the utilization is greater than the
utilization threshold v…
Unsigned32r/w
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.1.1.1.23
ostInterfaceColor
This objects sets the interface to color aware or color unaware (color
blind) mode.


unaware(1) Port is configured in color unaware mode. Traffic that
ingresses a port is cl…
Enumerationr/w
Enumerated Values:
1unaware
2aware
 .1.3.6.1.4.1.7342.7.1.1.1.1.24
ostInterfaceManagement
This objects set the port to be a standard port or a dedicated
management port.


standard(1) Port is configured as a standard port that follows the
EVC configuration
…
Enumerationr/w
Enumerated Values:
1standard
2dedicated
 .1.3.6.1.4.1.7342.7.1.1.1.1.25

ostIfEvcTable

table
.1.3.6.1.4.1.7342.7.1.1.2 · 1 row entry · 22 columns
Open in standard view 
This table contains EVC entries for corresponding Interface entries.
More than one EVC entry can be associated with each Interface entry.
ostIfEvcEntry entry .1.3.6.1.4.1.7342.7.1.1.2.1
This is an Interface EVC table entry.
Indexes
ostInterfaceIndex ostIfEvcIndex
Column Syntax OID
ostIfEvcRowStatus
Status of the row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.1.2.1.1
ostIfEvcCeVlanIdList
The list of CE-VLAN IDs associated with the EVC named by ostInterfaceEvcName
on this interface. The CE-VLAN IDs values are in text form, separated by
comma characters.
OMNITRON-TC-MIBOstVlanIdListr/w
Textual Convention: OMNITRON-TC-MIBOstVlanIdList OctetString
Type Constraints:
range: 0..110
 .1.3.6.1.4.1.7342.7.1.1.2.1.2
ostIfEvcPrimaryVid
The primary VID associated with this EVC on this interface.
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.1.2.1.3
ostIfEvcName
The name associated with this EVC. Must be at least 1 character and unique.
OMNITRON-TC-MIBOstEvcNameStringr/w
Textual Convention: OMNITRON-TC-MIBOstEvcNameString OctetString
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.7.1.1.2.1.4
ostIfEvcIndex
The index associated with this interface EVC row.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.1.2.1.5
ostIfEvcExceptVid
The vid is not included in the evc CE-VLAN map.
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.1.2.1.6
ostIfEvcExceptOn
The All-But-One setting for this EVC.

True = The All-But-One Vid (ostIfEvcExceptVid) is defined for this EVC.

False = No All-But-One Vid defined.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.1.2.1.7
ostIfEvcExtendedOn
A vector of bits that indicates what Interface Extended Filtering
options are selected.

A bit set to '1' selects the Extended Filtering option.

A bit set to '0' denotes the the Extended Fil…
Bitsr/w
Enumerated Values:
0bMacda
1bMacsa
2bEtype
3bVid
4bIpsrc
5bIpdst
6bL4src
7bL4dst
8bPcp
9bDscp
 .1.3.6.1.4.1.7342.7.1.1.2.1.8
ostIfEvcExtendedMacda
This object specifies the Destination MAC for the Interface Extended
Filtering Option.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.1.2.1.9
ostIfEvcExtendedMacsa
This object specifies the Source MAC for the Interface Extended
Filtering Option.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.1.2.1.10
ostIfEvcExtendedEtype
This object specifies the Ethertype for the Interface Extended
Filtering Option.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.1.2.1.11
ostIfEvcExtendedVid
*** This object is deprecated ***
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.1.2.1.12
ostIfEvcExtendedIpsrc
This object specifies the Source IPv4 address for the Interface
Extended Filtering Option.

Setting this object also impacts the ostIfEvcExtendedIpsrcString
returned value. If an IPv4 address is written to…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.1.2.1.13
ostIfEvcExtendedIpdst
This object specifies the Destination IPv4 address for the Interface
Extended Filtering Option.

Setting this object also impacts the ostIfEvcExtendedIpdstString
returned value. If an IPv4 address is writt…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.1.2.1.14
ostIfEvcExtendedL4src
This object specifies the Layer 4 (TCP/UDP) Source port for the Interface Extended
Filtering Option.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.1.2.1.15
ostIfEvcExtendedL4dst
This object specifies the Layer 4 (TCP/UDP) Destination port for the Interface Extended
Filtering Option.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.1.2.1.16
ostIfEvcExtendedPcp
This object specifies the VLAN priorities for the Interface Extended
Filtering Option.
OMNITRON-TC-MIBOstPcpPriorityListr/w
Textual Convention: OMNITRON-TC-MIBOstPcpPriorityList OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.7342.7.1.1.2.1.17
ostIfEvcExtendedDscp
This object specifies the IP priority for the Interface Extended
Filtering Option.
OMNITRON-TC-MIBOstIpPriorityListr/w
Textual Convention: OMNITRON-TC-MIBOstIpPriorityList OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.7342.7.1.1.2.1.18
ostIfEvcProName
The object defines the protected EVC associated on this interface.

If the object is uninitializaed (null length string) or is the same
value as ostIfEvcName then the object indicates that the protected
EV…
OMNITRON-TC-MIBOstEvcNameStringOrNoner/w
Textual Convention: OMNITRON-TC-MIBOstEvcNameStringOrNone OctetString
Type Constraints:
range: 0..45
 .1.3.6.1.4.1.7342.7.1.1.2.1.19
ostIfEvcProCeVlanIdList
This object defines the CE-VLAN IDs associated with the protected EVC
on this interface.

If the object value is uninitializaed (null length string) or is the
same value as ostIfEvcCeVlanIdList then the ob…
OMNITRON-TC-MIBOstVlanIdListr/w
Textual Convention: OMNITRON-TC-MIBOstVlanIdList OctetString
Type Constraints:
range: 0..110
 .1.3.6.1.4.1.7342.7.1.1.2.1.20
ostIfEvcExtendedIpsrcString
This object specifies the Source IPv4 or IPv6 address for the
Interface Extended Filtering Option.

Setting this object also impacts the ostIfEvcExtendedIpsrc
returned value. If an IPv4 address is written …
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.1.2.1.21
ostIfEvcExtendedIpdstString
This object specifies the Destination IPv4 or IPv6 address for the
Interface Extended Filtering Option.

Setting this object also impacts the ostIfEvcExtendedIpdst
returned value. If an IPv4 address is wri…
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.1.2.1.22

ostCableTestTable

table
.1.3.6.1.4.1.7342.7.1.1.3 · 1 row entry · 4 columns
Open in standard view 
This is a table of cable test results.
ostCableTestEntry entry .1.3.6.1.4.1.7342.7.1.1.3.1
Cable test table entry.
Indexes
ostCableTestIndex
Column Syntax OID
ostCableTestIndex
Chassis, module and port indices to which this interface belongs.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
 .1.3.6.1.4.1.7342.7.1.1.3.1.1
ostCableTestInit
Writing any value to this object causes the initiation of the port
cable test. When read the value returned is always '0'
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7342.7.1.1.3.1.2
ostCableTestStatus
This object indicates the status of the coper cable test inititated
via the cableTestInit object.

undefined(0) Results are undefined or function not supported
completeNoBreak(1) Test c…
Enumeration
Enumerated Values:
0undefined
1completeNoBreak
2completeBreakDetected
3testInProcess
4portNotCopper
 .1.3.6.1.4.1.7342.7.1.1.3.1.3
ostCableTestResult
This object indicates the distance that the cable is broken from
its source. A value of zero indicates that a test has not been
run successfully or there is no cable break detected.
metersSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.1.3.1.4

ostPortStatisticsCurrentTable

table
.1.3.6.1.4.1.7342.7.1.1.5 · 1 row entry · 4 columns
Open in standard view 
This table supports current port statistics objects. The entries
in this table are updated every five seconds and provides a snapshot
of port utilization and throughput.
ostPortStatisticsCurrentEntry entry .1.3.6.1.4.1.7342.7.1.1.5.1
Port current statistics table entry.
Indexes
ostInterfaceIndex
Column Syntax OID
ostPortStatisticsCurrentTxThroughput
This object indicates the average transmission throughput for a port
during the last 5 seconds in expressed in bits/second.

It is calculated based upon:

(Number of octets transmitted)*8/(…
bits-per-secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.1.5.1.1
ostPortStatisticsCurrentTxUtilization
This object contains the average transmisson utilization for a port
during the last 5 seconds expressed in milli-percent, where 1 indicates
0.001 percent.

It is calculated based upon:

(os…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.1.5.1.2
ostPortStatisticsCurrentRxThroughput
This object indicates the average receive throughput for a port
during the last 5 seconds in expressed in bits/second.

It is calculated based upon:

(Number of octets received)*8/(5 second…
bits-per-secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.1.5.1.3
ostPortStatisticsCurrentRxUtilization
This object contains the average received utilization for a port during
the last 5 seconds expressed in milli-percent, where 1 indicates 0.001
percent.

It is calculated based upon:

(ostP…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.1.5.1.4

ostEvcTable

table
.1.3.6.1.4.1.7342.7.1.2.1 · 1 row entry · 21 columns
Open in standard view 
This table supports EVC configuration.
          
Modification of an existing EVC is allowed by changing the object
values for an existing entry. Any of the parameters of the EVC,
including the EVC name can be changed during modification.
ostEvcEntry entry .1.3.6.1.4.1.7342.7.1.2.1.1
EVC table entry.
Indexes
ostModuleIndex ostEvcIndex
Column Syntax OID
ostEvcIndex
The index associated with this EVC.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.2.1.1.1
ostEvcRowStatus
Status of the row. Used for row creation and destruction.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.2.1.1.2
ostEvcName
The name associated with this EVC. Must be at least 1 character and unique.
OMNITRON-TC-MIBOstEvcNameStringr/w
Textual Convention: OMNITRON-TC-MIBOstEvcNameString OctetString
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.7.1.2.1.1.3
ostEvcVid
The provider tag associated with this EVC.
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.2.1.1.4
ostEvcPortList
A string specifying the list of ports associated with this EVC.
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
 .1.3.6.1.4.1.7342.7.1.2.1.1.5
ostEvcPreserveCeVid
Preservation maintains service frame CE-VLAN IDs across this EVC.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.2.1.1.6
ostEvcPreserveCeCos
Preservation maintains service frame CE-CoS across this EVC.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.2.1.1.7
ostEvcProviderTrafficClass
Provider traffic class where 0=discard, 1=lowest,
4=highest GM4, 8=highest XM5, default=1
Unsigned32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.7342.7.1.2.1.1.8
ostEvcProviderPriority
The provider VLAN priority bits for PDU if sent tagged for this EVC.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.7342.7.1.2.1.1.9
ostEvcCTagPriority
The C-Tag VLAN priority bits for PDU if sent tagged for this EVC.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.7342.7.1.2.1.1.10
ostEvcEnable
Enable or disable ostEvcName.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.2.1.1.11
ostEvcTrust
The Trust setting for this EVC.

True = Trust. Use the priority bits of the ingressing frame for this EVC.
The ostEvcProviderPriority object for this EVC was not set.

False = No Trust…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.2.1.1.12
ostEvcVidSTagTranslation
The provider tag that is associated with the EVC on the port
ostEvcPortListSTagTranslation.
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.2.1.1.13
ostEvcPortListSTagTranslation
A string specifying the port associated with ostEvcVidSTagTranslation
VID.
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
 .1.3.6.1.4.1.7342.7.1.2.1.1.14
ostEvcMode
This object defines the EVC mode.

The value 'normal' indicates that the EVC is a normal EVC and the S-TAG
is preserved across ENNI ports.

The value 'stagTranslation' indicates that the EVC …
Enumerationr/w
Enumerated Values:
1normal
2stagTranslation
 .1.3.6.1.4.1.7342.7.1.2.1.1.15
ostEvcManagementPort1
This object defines whether the management port 1 associated with the EVC
is active or inactive.

inactive(1) Indicates that a management port is not present on the
current EVC or that if the…
Enumerationr/w
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.7342.7.1.2.1.1.16
ostEvcManagementPort2
This object defines whether the management port 2 associated with the EVC
is active or inactive.

inactive(1) Indicates that a management port is not present on the
current EVC or that if the…
Enumerationr/w
Enumerated Values:
1inactive
2active
 .1.3.6.1.4.1.7342.7.1.2.1.1.17
ostEvcProtect
This object defines whether the specific EVC can be deleted.

noProtect(1) This value indicates that the EVC can be deleted

protect(2) This value indicates that the EVC cannot be delet…
Enumerationr/w
Enumerated Values:
1noProtect
2protect
 .1.3.6.1.4.1.7342.7.1.2.1.1.18
ostEvcEtreePortList
A string specifying the ports associated with an E-Tree EVC that are
defined as Root ports. Ports not listed are designated as Leaf ports.

The value of this object is ignored if ostEvcType is 'standard'.
…
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
 .1.3.6.1.4.1.7342.7.1.2.1.1.19
ostEvcType
This object defines type of EVC.

standardEvc(1) The EVC type is a standard EVC, following normal
forwarding rules for all the ports associated with
the EVC (ostEvcPortList)
…
Enumerationr/w
Enumerated Values:
1standardEvc
2simpleETree
3branchETree
4trunkETree
 .1.3.6.1.4.1.7342.7.1.2.1.1.20
ostEvcTrafficClassTrust
The class trust setting for this EVC.

True = Trust. Use the priority bits of the ingressing frame to map to
the correct class (output queue). The ostEvcProviderTrafficClass
object for this E…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.2.1.1.21

ostModuleSettingsTable

table
.1.3.6.1.4.1.7342.7.1.3.1 · 1 row entry · 37 columns
Open in standard view 
This table supports module global settings.
ostModuleSettingsEntry entry .1.3.6.1.4.1.7342.7.1.3.1.1
Module Settings table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostModuleIndex
The module chassis and slot numbers.
Base 10 Format: CCSS where
CC is the chassis index, 1 to 99
SS is the slot index, 1 to 99
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.3.1.1.1
ostEnableEvcProcessing
Enable or disable EVC processing.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.1.1.2
ostCustomerEthertype
Customer ethertype value.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.3.1.1.3
ostProviderEthertype
Provider ethertype value.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.3.1.1.4
ostSaveSettings
Writing any value to this object saves the current extension settings to flash.
This is a write only object. This object is used in conjunction with ostSaveStatus.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7342.7.1.3.1.1.5
ostCfmTrapEnables
This object is a bit string, where each bit controls whether a CFM trap is enabled or disabled.
When a bit is set to 1, the associated trap is enabled.

The trap controlled by each bit is defined as follow…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.1.1.6
ostSnmpTrapPortNum
This object configures the SNMP trap target port. The default value is 162.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.3.1.1.7
ostSntpEnable
Enable or disable SNTP processing.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.1.1.8
ostSntpServerIp1
SNTP server 1 IPv4 address.

Setting this object also impacts the ostSntpServerIp1String
returned value. If an IPv4 address is written to this object the
two objects return the same value. If ostSntpServer…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.3.1.1.9
ostSntpServerIp2
SNTP server 2 IPv4 address.

Setting this object also impacts the ostSntpServerIp2String
returned value. If an IPv4 address is written to this object the
two objects return the same value. If ostSntpServer…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.3.1.1.10
ostSntpTimeZone
Set the time zone.
1 GMT Greenwich Mean Time UTC
2 UTC Coordinated Universal Time UTC
3 WET Western European Time UTC
4 Z Zulu Time Zone UTC
5 N …
Unsigned32r/w
Constraints:
range: 1-81
 .1.3.6.1.4.1.7342.7.1.3.1.1.11
ostSntpServerInterval
SNTP server request interval in minutes.
Unsigned32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.7342.7.1.3.1.1.12
ostDaytimeEnable
Enable or disable Daytime protocol processing. Default setting is disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.1.1.13
ostDaytimeServerIp
Daytime server IPv4 address.

Setting this object also impacts the ostDaytimeServerIpString
returned value. If an IPv4 address is written to this object the
two objects return the same value. If ostDaytime…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.3.1.1.14
ostDaytimeServerType
The Daytime server type, tcp or udp. Default setting is type udp.
Enumerationr/w
Enumerated Values:
1tcp
2udp
 .1.3.6.1.4.1.7342.7.1.3.1.1.15
ostDaytimeServerInterval
Daytime server request interval in minutes. Default setting is 10 minutes.
Unsigned32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.7342.7.1.3.1.1.16
ostCfmXcAutoLearning
Enables or disables automatic learning of cross connecting remote MEPs. Default setting is off.
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.7342.7.1.3.1.1.17
ostClearTrapLog
Writing any value to this object causes the trap log to be cleared.
This is a write only object.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7342.7.1.3.1.1.18
ostSntpIpSrc
SNTP source IP address number, default is 1 (IP1)
Unsigned32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.7342.7.1.3.1.1.19
ostDaytimeIpSrc
Daytime source IP address number, default is 1 (IP1)
Unsigned32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.7342.7.1.3.1.1.20
ostNumEgressSchedulingProfiles
A integer value for the number of Egress Scheduling Profiles per module.
Used with ostSchedulingProfile Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.1.1.21
ostNumPortEgressQueues
A integer value for the number of Port Egress Queues per module.
Used with ostEgressQueue Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.1.1.22
ostClearMacTable
Writing any value to this object causes the learned MAC addresses to be
cleared. This is a write only object.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7342.7.1.3.1.1.23
ostFixedCompId
*** NOT SUPPORTED IN V5.3 ***

This object fixes the IEEE Comp ID to be the same as the port number or
dynamic based upon the port type selected (UNI or NNI).

undefined (0) Configuration i…
Enumerationr/w
Enumerated Values:
0undefined
1dynamic
2fixed
 .1.3.6.1.4.1.7342.7.1.3.1.1.24
ostSynceSource
This object indicates the source of the port clocks for each of the
PHYs.

A value of 0 indicates that the source of the clock is from the on board
oscillator.

A value of 1..5 indicates that…
Unsigned32r/w
Constraints:
range: 0-5
 .1.3.6.1.4.1.7342.7.1.3.1.1.25
ostEgressPolicingType
Sets the specific module egress policing mode which
is used to count bytes for egress bandwidth profile calculation
purposes. Applicable for the XM5 only.

policingL1(1) L1 includes all bytes in frame, in…
Enumerationr/w
Enumerated Values:
1policingL1
2policingL2
 .1.3.6.1.4.1.7342.7.1.3.1.1.26
ostFirmwareRestartType
Sets whether the module is automatically restarted after the
firmware is updated or must be manually restarted.

auto(1) Module is automatically restarted after firmware is
updated
…
Enumerationr/w
Enumerated Values:
1auto
2manual
 .1.3.6.1.4.1.7342.7.1.3.1.1.27
ostFpgaRestartType
Sets whether the module's FPGA is automatically restarted after the
firmware is updated or must be manually restarted.

auto(1) FPGA is automatically restarted after FPGA image is
upd…
Enumerationr/w
Enumerated Values:
1auto
2manual
 .1.3.6.1.4.1.7342.7.1.3.1.1.28
ostGlobalPauseEnable
Enable Pause on this module.
True indicates pause (flow control) is globally enabled.
False indicates pause (flow control) is globally disabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.1.1.29
ostZtpEnable
THis object configures the module Zero Touch provisioning modes.

noZtp(0) ZTP is disabled, standard startup operation

stdZtp(1) Standard ZTP using DHCP and TFTP

li…
Enumerationr/w
Enumerated Values:
0noZtp
1stdZtp
2listenZtp
3activateZtp
 .1.3.6.1.4.1.7342.7.1.3.1.1.30
ostSynceClockStatus
This object indicates the status of the synchronous Ethernet (SyncE)
clock status if synce has been enabled via the ostSynceSource object.

Currently this object is applicable to the XM5 only.
…
Enumeration
Enumerated Values:
1notApplicable
2internal
3linkUpAcquiring
4linkUpLocked
5linkUpLockedHoldover
6linkDownHoldover
7linkDownFreerun
8linkUpNotLocked
 .1.3.6.1.4.1.7342.7.1.3.1.1.31
ostSntpServerIp1String
SNTP server 1 IPv4 or IPv6 address.

Setting this object also impacts the ostSntpServerIp1
returned value. If an IPv4 address is written to this object the
two objects return the same value. If this object…
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.3.1.1.32
ostSntpServerIp2String
SNTP server 2 IPv4 or IPv6 address.

Setting this object also impacts the ostSntpServerIp2
returned value. If an IPv4 address is written to this object the
two objects return the same value. If this object…
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.3.1.1.33
ostDaytimeServerIpString
Daytime server IPv4 or IPv6 address.

Setting this object also impacts the ostDaytimeServerIp
returned value. If an IPv4 address is written to this object the
two objects return the same value. If this obj…
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.3.1.1.34
ostModulePrompt
This object specifies the CLI prompt.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.7342.7.1.3.1.1.35
ostModuleSplashWarning
This object specifies the splash screen warning message for the
CLI. The message is displayed after the normal splash screen and
before the CLI prompt.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7342.7.1.3.1.1.36
ostConsoleEnable
This object enables or disables the serial console port

enabled(1) enable the serial console port, serial console port
works in a normal way

disable(2) disable the se…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.3.1.1.37

ostModuleStatusTable

table
.1.3.6.1.4.1.7342.7.1.3.2 · 1 row entry · 8 columns
Open in standard view 
This table supports module global status.
ostModuleStatusEntry entry .1.3.6.1.4.1.7342.7.1.3.2.1
Module Status table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostSaveStatus
A value of 0 indicates all extension settings have been saved to flash.
This object is used in conjunction with ostSaveSettings.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7342.7.1.3.2.1.1
ostModifyCount
This counter is incremented each time a configuration setting is changed,
such that the ostSaveStatus object would become non-zero.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.2.1.2
ostSnmpErrorCount
This counter is incremented each time a SNMP error is detected. The
ostSnmpErrorMessage object indicates a description of the error.

The initial value for this object is 0 and indicates that no SNMP
error…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.2.1.3
ostSnmpErrorMessage
This object is a textual string that indicates the reason that
the SNMP error was generated for the ostSnmpErrorCount value.

The initial value for this object is null and indicates that no SNMP
errors hav…
OMNITRON-TC-MIBOstErrorString
Textual Convention: OMNITRON-TC-MIBOstErrorString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.7342.7.1.3.2.1.4
ostSnmpCpuUtilization
This object indicates the busyness or utilization of the CPU
expressed in milli-percent, where 1 indicates 0.001 percent.
Unsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.3.2.1.5
ostSnmpRamUsed
This object indicates the amount RAM in kbytes that is
currently being used by the CPU, where 1 indicates 1000 bytes.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.2.1.6
ostSnmpFlashUsed
This object indicates the amount flash memory in kbytes that is
currently used, where 1 indicates 1000 bytes.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.3.2.1.7
ostSaveState
The state of the save process indicating if a save is needed and if the
save opeeration completed

idle(0) Save is not in process, no save is needed
New save will be accepted
…
Enumeration
Enumerated Values:
0idle
1changed
2inProcess
3saveDone
 .1.3.6.1.4.1.7342.7.1.3.2.1.8

ostModuleLocationTable

table
.1.3.6.1.4.1.7342.7.1.3.3 · 1 row entry · 7 columns
Open in standard view 
This table supports module location and positiong information.
ostModuleLocationEntry entry .1.3.6.1.4.1.7342.7.1.3.3.1
Module location table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostModuleLocationAddress
This object is used to indicate the street address of a module.

The text in this object is arbitrary, but it should reflect normal usage
for the street address for the specific location
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.7342.7.1.3.3.1.1
ostModuleLocationCity
This object is used to indicate the city of a module.

The text in this object is arbitrary, but it should reflect normal usage
for the city name for the specific location.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.7342.7.1.3.3.1.2
ostModuleLocationState
This object is used to indicate the state or province of a module.

The text in this object is arbitrary, but it should reflect normal usage
for the state or province for the specific location.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.7342.7.1.3.3.1.3
ostModuleLocationPostalCode
This object is used to indicate the postal code or zip code of a module.

The text in this object is arbitrary, but it should reflect local usage
of the the postal or zip code.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.7342.7.1.3.3.1.4
ostModuleLocationLatitude
This object is used to indicate the latitude of a module in degress.

The format of the latitude can be a value from '+90.000000' to
'-90.000000' where a positive number is North and and a negative number
…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.7342.7.1.3.3.1.5
ostModuleLocationLongitude
This object is used to indicate the longitude of a module in degrees.

The format of the longitude can be a value from '+180.000000' to
'-180.000000', where a positive number is West and and a negative num…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.7342.7.1.3.3.1.6
ostModuleLocationAltitude
This object is used to indicate the altitude of a module in meters. The
value can be above or below sea level.

The format of the altitude can be a value from '100000000.000000' to
'-1000000.000000', where…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.7342.7.1.3.3.1.7

ostModuleLinkRedundancyTable

table
.1.3.6.1.4.1.7342.7.1.3.4 · 1 row entry · 8 columns
Open in standard view 
This table supports module link redundancy configuration and status.
ostModuleLinkRedundancyEntry entry .1.3.6.1.4.1.7342.7.1.3.4.1
Module Link Redundancy table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostModuleLinkRedundancyEnable
This object specifies whether the Link Redundancy function is enabled.

The value 'true' indicates that Link Redundancy is enabled.

The value 'false' indicates that Link Redundancy is disabl…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.4.1.1
ostModuleLinkRedundancyReturnWorking
This object specifies whether the Link Redundancy return to working
port is enabled.

The value 'true' indicates that Link Redundancy return to working port
is enabled.

The value 'false' ind…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.4.1.2
ostModuleLinkRedundancyWorkingPort
This object specifies the Working Port number.
OMNITRON-TC-MIBOstPortNumberr/w
Textual Convention: OMNITRON-TC-MIBOstPortNumber Unsigned32
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.7.1.3.4.1.3
ostModuleLinkRedundancyProtectionPort
This object specifies the Protection Port number.
OMNITRON-TC-MIBOstPortNumberr/w
Textual Convention: OMNITRON-TC-MIBOstPortNumber Unsigned32
Type Constraints:
range: 0..99
 .1.3.6.1.4.1.7342.7.1.3.4.1.4
ostModuleLinkRedundancyWorkingPortStatus
This object indicates the Working Port Status.

na(0) Not Applicable, port state is unknown or not
linked
forward(1) Port is in the Active (forward…
OMNITRON-TC-MIBOstErpsPortState
Textual Convention: OMNITRON-TC-MIBOstErpsPortState Enumeration
Type Values:
0na
1forward
2blocked
 .1.3.6.1.4.1.7342.7.1.3.4.1.5
ostModuleLinkRedundancyWorkingPortLink
This object indicates the Working Port link state.

na(0) Not Applicable, port link state is unknown
up(1) Port is linked and capable of passing traffic
down(2) …
OMNITRON-TC-MIBOstErpsLinkState
Textual Convention: OMNITRON-TC-MIBOstErpsLinkState Enumeration
Type Values:
0na
1up
2down
 .1.3.6.1.4.1.7342.7.1.3.4.1.6
ostModuleLinkRedundancyProtectionPortStatus
This object indicates the Protection Port Status.

na(0) Not Applicable, port state is unknown or not
linked
forward(1) Port is in the Active (forw…
OMNITRON-TC-MIBOstErpsPortState
Textual Convention: OMNITRON-TC-MIBOstErpsPortState Enumeration
Type Values:
0na
1forward
2blocked
 .1.3.6.1.4.1.7342.7.1.3.4.1.7
ostModuleLinkRedundancyProtectionPortLink
This object indicates the Protection Port link state.

na(0) Not Applicable, port link state is unknown
up(1) Port is linked and capable of passing traffic
down(2) …
OMNITRON-TC-MIBOstErpsLinkState
Textual Convention: OMNITRON-TC-MIBOstErpsLinkState Enumeration
Type Values:
0na
1up
2down
 .1.3.6.1.4.1.7342.7.1.3.4.1.8

ostModuleDhcpRelayCfgTable

table
.1.3.6.1.4.1.7342.7.1.3.5 · 1 row entry · 5 columns
Open in standard view 
This table supports module DHCP relay configuration.
ostModuleDhcpRelayCfgEntry entry .1.3.6.1.4.1.7342.7.1.3.5.1
Module DHCP relay Link Redundancy configuration table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostModuleDhcpRelayCfgRelayEnable
This object specifies whether the DHCP relay function is enabled.

The value 'true' indicates that DHCP relay function is enabled.

The value 'false' indicates that DHCP relay function is dis…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.5.1.1
ostModuleDhcpRelayCfgCircuitIdEnable
This object specifies whether the DHCP relay function Circuit ID is
enabled.

The value 'true' indicates that DHCP relay function Circuit ID is
enabled.

The value 'false' indicates that DHCP…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.5.1.2
ostModuleDhcpRelayCfgRemoteIdEnable
This object specifies whether the DHCP relay function Remote ID is
enabled.

The value 'true' indicates that DHCP relay function Remote ID is
enabled.

The value 'false' indicates that DHCP r…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.3.5.1.3
ostModuleDhcpRelayCfgServerIpAddress
This object specifies the DHCP Server used by the DHCP relay function.
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.3.5.1.4
ostModuleDhcpRelayCfgRelayType
This object specifies the DHCP Relay type.

drop(1) Drops DHCP relay frames received on a client-side port

keep(2) Keeps DHCP relay frames received on a client-side port and
…
Enumerationr/w
Enumerated Values:
1drop
2keep
3replace
 .1.3.6.1.4.1.7342.7.1.3.5.1.5

ostModuleLinkModeCfgTable

table
.1.3.6.1.4.1.7342.7.1.3.6 · 1 row entry · 2 columns
Open in standard view 
This table supports module Link Mode configuration.
ostModuleLinkModeCfgEntry entry .1.3.6.1.4.1.7342.7.1.3.6.1
Module Link Mode configuration table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostModuleLinkModeCfgSelect
This object specifies the Link Mode select type. This object is
supported for the XM5 only.

none(1) No link mode is specified. This is equivalent to Link
Segment in other modules.
…
Enumerationr/w
Enumerated Values:
1none
2lpt
 .1.3.6.1.4.1.7342.7.1.3.6.1.1
ostModuleLinkModeCfgStatus
This object specifies the Link Mode status. This object is
supported for the XM5 only.

startup(1) Start up, not operating in a link propagate mode

ok(2) Both ports are up and the mod…
Enumeration
Enumerated Values:
1startup
2ok
3p1Down
4p2Down
5wait
 .1.3.6.1.4.1.7342.7.1.3.6.1.2

ostBandwidthProfileTable

table
.1.3.6.1.4.1.7342.7.1.4.1 · 1 row entry · 22 columns
Open in standard view 
This table supports bandwidth profile settings.
ostBandwidthProfileEntry entry .1.3.6.1.4.1.7342.7.1.4.1.1
Bandwidth profile settings table entry.
Indexes
ostBwpModuleIndex ostBwpIndex
Column Syntax OID
ostBwpModuleIndex
Chassis and module indices to which this bandwidth profile belongs.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.4.1.1.1
ostBwpIndex
The index associated with this bandwidth profile.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.4.1.1.2
ostBwpRowStatus
Status of the row. Used for row creation and destruction.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.4.1.1.3
ostBwpName
The identifier associated with this profile.
OctetStringr/w
Constraints:
range: 1-45
 .1.3.6.1.4.1.7342.7.1.4.1.1.4
ostBwpEnable
Enable or disable bandwidth profile. Default is enable.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.4.1.1.5
ostBwpUniPort
True when profile is associated with a UNI port. Default is false.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.4.1.1.6
ostBwpEvcName
The name of EVC associated with this BWP.
OMNITRON-TC-MIBOstEvcNameStringOrNoner/w
Textual Convention: OMNITRON-TC-MIBOstEvcNameStringOrNone OctetString
Type Constraints:
range: 0..45
 .1.3.6.1.4.1.7342.7.1.4.1.1.7
ostBwpCommittedBurstSize
Committed Burst Size in KBs. Default is 15.
Unsigned32r/w
Constraints:
range: 5-256000
 .1.3.6.1.4.1.7342.7.1.4.1.1.8
ostBwpCommittedIngressInformationRate
Committed Ingress Information Rate in kb/sec.

The maximum value for 10G ports is 10000000.
The maximum value for 1G ports is 1000000.

Default is 0.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.7342.7.1.4.1.1.9
ostBwpClassOfServiceName
Class of service identifier name.
OMNITRON-TC-MIBOstCosNameStringOrNoner/w
Textual Convention: OMNITRON-TC-MIBOstCosNameStringOrNone OctetString
Type Constraints:
range: 0..45
 .1.3.6.1.4.1.7342.7.1.4.1.1.10
ostBwpExcessBurstSize
Excess Burst Size in KBs. Default is 15.
Unsigned32r/w
Constraints:
range: 5-256000
 .1.3.6.1.4.1.7342.7.1.4.1.1.11
ostBwpExcessInformationRate
Excess Information Rate in kb/sec.

The maximum value for 10G ports is 10000000.
The maximum value for 1G ports is 1000000.

Default is 0.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.7342.7.1.4.1.1.12
ostBwpPortList
A string specifying the list of ports associated with this Bandwidth Profile.
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
 .1.3.6.1.4.1.7342.7.1.4.1.1.13
ostBwpCouplingFlag
The Coupling Flag allows the choice between two modes of operation of the
rate enforcement algorithm for the GM3/GM4/XM5. Default is false.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.4.1.1.14
ostBwpCouplingType
The Coupling Type allows the selection on how CIR and EIR interact with
each other for the GM3/GM4. It is an enhancment of the ostBwpCouplingFlag object.

ostBwpCouplingFlag is ignored for cirEirCoupleColo…
Enumerationr/w
Enumerated Values:
1cirEirCoupleDependent
2cirEirNotCoupled
3cirEirCoupleColorUnaware
4cirEirCoupleColorAware
 .1.3.6.1.4.1.7342.7.1.4.1.1.15
ostBwpPolicingType
This object allows that the bandwidth profile to be associated with
hierarchical policers.

policingTypeNormal(1) Normal policing type, no hierarchical policers,
single level police…
Enumerationr/w
Enumerated Values:
1policingTypeNormal
2policingTypeLevel1
3policingTypeLevel2
 .1.3.6.1.4.1.7342.7.1.4.1.1.16
ostBwpPolicingAssociationName
The bandwidth profile next level identifier that is associated
with this specific bandwidth profile. This object associates the
current specific bandwdith profile output to a secondary policer
indicated by this object's…
OctetStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.7342.7.1.4.1.1.17
ostBwpColorMode
The Color Mode flag. A value of True indicates the BWP is color
aware. A value of False indicates the BWP is color blind (color blind)
Default is false.

For the GM3/GM4 writing a value to this object is i…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.4.1.1.18
ostBwpPerformanceEnable
This object indicates whether a performance data set is configured
for a specific bandwidth profile. This allows for only specific
bandwidth profiles to be monitored if there are limitations in the
module being accessed…
Enumerationr/w
Enumerated Values:
1disablePerformanceDataSet
2enablePerformanceDataSet
 .1.3.6.1.4.1.7342.7.1.4.1.1.19
ostBwpPerformanceStatsClear
Writing any value to this object clears the counter values of the
associated row in the ostBandwidthProfilePerformanceTable.

If no row exists for this BWP in the ostBandwidthProfilePerformanceTable
no err…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.4.1.1.20
ostBwpPolicingMode
Sets the specific bandwidth profile policing mode which
is used to count bytes for bandwidth profile calculation
purposes. Applicable for the XM5 only.

policingL1(1) L1 includes all bytes in frame, inter…
Enumerationr/w
Enumerated Values:
1policingL1
2policingL2
3policingL3
 .1.3.6.1.4.1.7342.7.1.4.1.1.21
ostBwpCtv
Enable or disable CIR threshold violation notification. Default is
disable, 'false'.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.4.1.1.22

ostBandwidthProfilePerformanceTable

table
.1.3.6.1.4.1.7342.7.1.4.2 · 1 row entry · 9 columns
Open in standard view 
This table supports bandwidth profile performance data. This table is
created when a bandwidth profile is added with the ostBwpPerformanceEnable
set to enabled.
ostBandwidthProfilePerformanceEntry entry .1.3.6.1.4.1.7342.7.1.4.2.1
Bandwidth profile performance table entry.
Indexes
ostBwpModuleIndex ostBwpIndex
Column Syntax OID
ostBwpPerformanceGreenOctets
This object indicates the number of valid green octets
that were received on the module for the associated bandwidth
profile.

This object defaults to '0'.
octetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.4.2.1.1
ostBwpPerformanceYellowOctets
This object indicates the number of valid yellow octets
that were received on the module for the associated bandwidth
profile.

This object defaults to '0'.
octetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.4.2.1.2
ostBwpPerformanceRedOctets
This object indicates the number of valid red octets
that were received on the module for the associated bandwidth
profile.

This object defaults to '0'.
octetsSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.4.2.1.3
ostBwpPerformanceGreenThroughput
This object indicates the average receive throughput for a green BWP
during the last 5 seconds is expressed in bits/second.

It is calculated based upon:

(Number of octets received)*8/(5 s…
bits-per-secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.4.2.1.4
ostBwpPerformanceGreenUtilization
This object contains the average received utilization for a green BWP
during the last 5 seconds expressed in milli-percent, where 1 indicates
0.001 percent.

It is calculated based upon:

…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.4.2.1.5
ostBwpPerformanceYellowThroughput
This object indicates the average receive throughput for a yellow BWP
during the last 5 seconds is expressed in bits/second.

It is calculated based upon:

(Number of octets received)*8/(5 …
bits-per-secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.4.2.1.6
ostBwpPerformanceYellowUtilization
This object contains the average received utilization for a yellow BWP
during the last 5 seconds expressed in milli-percent, where 1 indicates
0.001 percent.

It is calculated based upon:

…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.4.2.1.7
ostBwpPerformanceRedThroughput
This object indicates the average receive traffic that is classified
as red for the BWP and typically indicates received traffic that
exceeds the combined CIR and EIR during the last 5 seconds is expressed
in bits/seco…
bits-per-secondSNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.7342.7.1.4.2.1.8
ostBwpPerformanceRedUtilization
This object contains the average received utilization for traffic
classfied as red for the BWP during the last 5 seconds expressed
in milli-percent, where 1 indicates 0.001 percent.

It is calculated base…
milli-percentUnsigned32
Constraints:
range: 0-100000
 .1.3.6.1.4.1.7342.7.1.4.2.1.9

ostL2cpTable

table
.1.3.6.1.4.1.7342.7.1.5.1 · 1 row entry · 2 columns
Open in standard view 
This table supports L2CP settings.
ostL2cpEntry entry .1.3.6.1.4.1.7342.7.1.5.1.1
L2CP settings table entry.
The ostInterfaceIndex port field supports values from 1 to 6.
Indexes
ostInterfaceIndex ostL2cpDstMacAddrIndex
Column Syntax OID
ostL2cpDstMacAddrIndex
Sets L2CP destination address.
OMNITRON-TC-MIBOstCosL2cpDstAddr
Textual Convention: OMNITRON-TC-MIBOstCosL2cpDstAddr Unsigned32
Type Constraints:
range: 1..20
 .1.3.6.1.4.1.7342.7.1.5.1.1.1
ostL2cpType
Sets L2CP type setting.
Enumerationr/w
Enumerated Values:
1discard
2tunnel
3forward
4peer
 .1.3.6.1.4.1.7342.7.1.5.1.1.2

ostl2ptGlobalTable

table
.1.3.6.1.4.1.7342.7.1.5.2 · 1 row entry · 7 columns
Open in standard view 
This supports L2PT global settings.
ostl2ptGlobalEntry entry .1.3.6.1.4.1.7342.7.1.5.2.1
L2PT global settings table entry.
Indexes
ostModuleIndex
Column Syntax OID
ostl2ptGlobalInstanceNextIndex
This object contains an unused value for next L2PT instance
on a module that can be used to implement L2PT, or a zero to
indicate that none exist.

This value needs to be read in order to find an available…
OMNITRON-TC-MIBOstIndexIntegerNextFree
Textual Convention: OMNITRON-TC-MIBOstIndexIntegerNextFree Unsigned32
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.7342.7.1.5.2.1.1
ostl2ptGlobalCdpDropThreshold
This object specifies the number of kbits per sec that are
allowed for CDP. Frames above this rate are dropped and are not
tunneled if tunneling is enabled.
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.7342.7.1.5.2.1.2
ostl2ptGlobalL2cpDropThreshold
This object specifies the number of kbits per seconds that are
allowed for L2CP addresses. Frames above this rate are dropped and
are not tunneled if tunneling is enabled.
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.7342.7.1.5.2.1.3
ostl2ptGlobalVtpDropThreshold
This object specifies the number of kbits per seconds that are
allowed for VTP. Frames above this rate are dropped and are not
tunneled if tunneling is enabled.
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.7342.7.1.5.2.1.4
ostl2ptGlobalPvstDropThreshold
This object specifies the number of kbits per seconds that are
allowed for PVST. Frames above this rate are dropped and are not
tunneled if tunneling is enabled.
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.7342.7.1.5.2.1.5
ostl2ptGlobalEncapDropThreshold
This object specifies the number of kbits per seconds that are
allowed for frames that have been encapsulated. Frames above this rate
are dropped and are not restored to their original protocol if
tunneling is not enabl…
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.7342.7.1.5.2.1.6
ostl2ptGlobalTranslateNextIndex
This object contains an unused value for next L2PT translate instance
on a module that can be used to implement L2PT translation, or a zero to
indicate that none exist.

This value needs to be read in orde…
OMNITRON-TC-MIBOstIndexIntegerNextFree
Textual Convention: OMNITRON-TC-MIBOstIndexIntegerNextFree Unsigned32
Type Constraints:
range: 0..16
 .1.3.6.1.4.1.7342.7.1.5.2.1.7

ostl2ptTable

table
.1.3.6.1.4.1.7342.7.1.5.3 · 1 row entry · 22 columns
Open in standard view 
This is a table for L2PT (Layer 2 Protocol Tunneling)
ostl2ptEntry entry .1.3.6.1.4.1.7342.7.1.5.3.1
L2PT entry.
Indexes
ostModuleIndex ostl2ptIndex
Column Syntax OID
ostl2ptIndex
An index to the L2PT index table which indicates the specific L2PT
instance for the module. Valid range is 1 to 5.

ostl2ptGlobalInstanceNextIndex needs to be inspected to find an
available index for row-c…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.5.3.1.1
ostl2ptRowStatus
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.5.3.1.2
ostl2ptCdpEnable
The CDP L2PT enable object.

undefined(0) CDP enable is undefined or illegal
enabled(1) CDP L2PT is enabled (tunneling)
disabled(2) CDP L2PT is disabled (no tunneling)

The default v…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.3
ostl2ptStpEnable
The STP (Spanning Tree Protocol) L2PT enable object.

undefined(0) STP enable is undefined or illegal
enabled(1) STP L2PT is enabled (tunneling)
disabled(2) STP L2PT is disabled (no tunneling)
…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.4
ostl2ptVtpEnable
The VTP L2PT enable object.

undefined(0) VTP enable is undefined or illegal
enabled(1) VTP L2PT is enabled (tunneling)
disabled(2) VTP L2PT is disabled (no tunneling)

The default v…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.5
ostl2ptPvstEnable
The VTP L2PT enable object.

undefined(0) PVST enable is undefined or illegal
enabled(1) PVST L2PT is enabled (tunneling)
disabled(2) PVST L2PT is disabled (no tunneling)

The defaul…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.6
ostl2ptEvcName
The name associated with this EVC for L2PT instance. Must be at least
1 character and unique.
OMNITRON-TC-MIBOstEvcNameStringr/w
Textual Convention: OMNITRON-TC-MIBOstEvcNameString OctetString
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.7.1.5.3.1.7
ostl2ptEncapsulatedPorts
The list of ports that are encapsulated for the L2PT instance. At least
one port must be selected. Management Ports are not included.
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
 .1.3.6.1.4.1.7342.7.1.5.3.1.8
ostl2ptSlowProtocolEnable
The Slow Protocol address 01-80-c2-00-00-02 L2PT enable object.

undefined(0) Slow Protocol L2PT enable is undefined or illegal
enabled(1) Slow Protocol L2PT is enabled (tunneling)
disabled(2) Slo…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.9
ostl2ptPortAuthEnable
The Port Authentication address 01-80-c2-00-00-03 L2PT enable object.

undefined(0) Port Authentication L2PT enable is undefined or illegal
enabled(1) Port Authentication L2PT is enabled (tunneling)
…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.10
ostl2ptMac04Enable
The L2CP MAC address 01-80-c2-00-00-04 L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-04 L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-04 L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.11
ostl2ptMac05Enable
The L2CP MAC address 01-80-c2-00-00-05 L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-05 L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-05 L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.12
ostl2ptMac06Enable
The L2CP MAC address 01-80-c2-00-00-06 L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-06 L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-06 L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.13
ostl2ptElmiEnable
The E-LMI address 01-80-c2-00-00-07 L2PT enable object.

undefined(0) E-LMI L2PT enable is undefined or illegal
enabled(1) E-LMI L2PT is enabled (tunneling)
disabled(2) E-LMI L2PT is disabled (no …
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.14
ostl2ptMac08Enable
The L2CP MAC address 01-80-c2-00-00-08 L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-08 L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-08 L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.15
ostl2ptMac09Enable
The L2CP MAC address 01-80-c2-00-00-09 L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-09 L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-09 L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.16
ostl2ptMac0aEnable
The L2CP MAC address 01-80-c2-00-00-0a L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-0a L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-0a L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.17
ostl2ptMac0bEnable
The L2CP MAC address 01-80-c2-00-00-0b L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-0b L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-0b L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.18
ostl2ptMac0cEnable
The L2CP MAC address 01-80-c2-00-00-0c L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-0c L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-0c L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.19
ostl2ptMac0dEnable
The L2CP MAC address 01-80-c2-00-00-0d L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-0d L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-0d L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.20
ostl2ptlldpEnable
The LLDP MAC address 01-80-c2-00-00-02 L2PT enable object.

undefined(0) LLDP L2PT enable is undefined or illegal
enabled(1) LLDP L2PT is enabled (tunneling)
disabled(2) LLDP L2PT is disabled (no …
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.21
ostl2ptMac0fEnable
The L2CP MAC address 01-80-c2-00-00-0f L2PT enable object.

undefined(0) MAC 01-80-c2-00-00-0f L2PT enable is undefined or illegal
enabled(1) MAC 01-80-c2-00-00-0f L2PT is enabled (tunneling)
disable…
Enumerationr/w
Enumerated Values:
0undefined
1enabled
2disabled
 .1.3.6.1.4.1.7342.7.1.5.3.1.22

ostLldpTable

table
.1.3.6.1.4.1.7342.7.1.5.4 · 1 row entry · 4 columns
Open in standard view 
This is a table for LLDP DPoE Extensions
ostLldpEntry entry .1.3.6.1.4.1.7342.7.1.5.4.1
LLDP extension local entry.
Indexes
ostLldpIndex
Column Syntax OID
ostLldpIndex
An index to the LLDP extension table which indicates the specific LLDP port
for the module.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
 .1.3.6.1.4.1.7342.7.1.5.4.1.1
ostLldpReceiveStatus
This object indicates the LLDP receive status.


undefined(0) Port received status is indeterminate
notReceiving(1) Port is not receiving LLDP PDUs
receiving(2) Port is receiving LLDP P…
Enumeration
Enumerated Values:
0undefined
1notReceiving
2receiving
 .1.3.6.1.4.1.7342.7.1.5.4.1.2
ostLldpDpoeStage
This object indicates the current DPoE stage.

A value of 0 indicates that DPoE is not enabled.

Stage 1 = INIT state
Stage 2 = PRE-DAC state
Stage 3 = DAC-PATH state
Stage 4 = DHCP state
Sta…
Unsigned32
Constraints:
range: 0-6
 .1.3.6.1.4.1.7342.7.1.5.4.1.3
ostLldpDpoeStageStatus
This object indicates the type of DPoE stage status.

undefined(0) The status is indeterminate (info)
inprocess(1) The status is running (info)
dacTlvInfoChange(2) …
Enumeration
Enumerated Values:
0undefined
1inprocess
2dacTlvInfoChange
3tftpProtocolError
4tftpRetriesInProcess
5tftpRetriesExhausted
6configFileValidationFailure
7dhcpRenewFailed
8dhcpMessageTimeout
9dhcpProcessTimeout
10dhcpCriticalInfoMissing
11dhcpNonCriticalInfoMissing
12networkDiscoveryFailure
13stageCompleted
 .1.3.6.1.4.1.7342.7.1.5.4.1.4

ostLldpRemoteTable

table
.1.3.6.1.4.1.7342.7.1.5.5 · 1 row entry · 5 columns
Open in standard view 
This is a table for Remote LLDP DPoE Extensions. There is one
row in the table for each DPoE responder per port, based upon the
responder's MAC address
ostLldpRemoteEntry entry .1.3.6.1.4.1.7342.7.1.5.5.1
LLDP extension remote entry.
Indexes
ostLldpIndex ostLldpRemoteMac
Column Syntax OID
ostLldpRemoteMac
The remote LLDP responder's MAC address for a specific port.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.5.5.1.1
ostLldpRemoteDpoeVersion
This object indicates the remote DPoE version.

A value of 0 indicates that DPoE is not enabled or the remote's
DPoE version is indeterminate. The version is composed of a major
version (0..15) and a minor…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.5.5.1.2
ostLldpRemoteDpoeConfig
This object indicates the LLDP remote bridge sub-type.

undefined (0) Bridge type is indeterminate or unknown
ieee8021ad(1) Bridge type is 802.1ad
ieee8021ahItag(2) Bridge type is I-…
Enumeration
Enumerated Values:
0undefined
1ieee8021ad
2ieee8021ahItag
3ieee8021ahItagBtag
 .1.3.6.1.4.1.7342.7.1.5.5.1.3
ostLldpRemoteDpoeStag
This object indicates the remote DPoE S-Tag value for management
traffic.

A value of 0 indicates that DPoE is not enabled or the remote's
DPoE S-Tag is indeterminate or is zero.

The upper 1…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.5.5.1.4
ostLldpRemoteDpoeCtag
This object indicates the remote DPoE C-Tag value for management
traffic.

A value of 0 indicates that DPoE is not enabled or the remote's
DPoE C-Tag is indeterminate or is zero.

The upper 1…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.5.5.1.5

ostl2ptTranslateTable

table
.1.3.6.1.4.1.7342.7.1.5.6 · 1 row entry · 4 columns
Open in standard view 
This is a table for L2PT (Layer 2 Protocol Tunneling) translation.
          
The ostl2ptTranslateTable defaults to five rows:
          
Row #    ostl2PtTranslateL2cpAddress   ostl2PtTranslateL2ptAddress
1        01-80-c2-80-00-00-00          01-00-0c-cd-cd-d0
2        01-80-c2-80-00-00-02          01-00-0c-cd-cd-d4
3        01-80-c2-80-00-00-03          01-00-0c-cd-cd-d3
4        01-80-c2-80-00-00-07          01-00-0c-cd-cd-d7
5        01-80-c2-80-00-00-0e          01-00-0c-cd-cd-de
ostl2ptTranslateEntry entry .1.3.6.1.4.1.7342.7.1.5.6.1
L2PT translate table entry.
Indexes
ostModuleIndex ostl2ptTranslateIndex
Column Syntax OID
ostl2ptTranslateIndex
An index to the L2PT Translate table which indicates the specific L2PT
translation instance for the module. Up to 15 L2CP MAC addresses can
entered into this table.

ostl2ptGlobalTranslateNextIndex needs t…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.5.6.1.1
ostl2ptTranslateRowStatus
The status of the row.

The writable columns in a row cannot be changed if the row
is active. All columns must have a valid value before a row
can be activated.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.5.6.1.2
ostl2PtTranslateL2cpAddress
This object specifies the original L2CP MAC address that is to be
translated to the value of the ostl2PtTranslateL2ptAddress object.

This object MUST be a value in the L2CP address space:
01-80-c2-00-00…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.5.6.1.3
ostl2PtTranslateL2ptAddress
This object specifies the translated L2PT MAC address that is to be
translated from the value of the ostl2PtTranslateL2cpAddress object.

This object is preferred to be a value in the multicast address spa…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.5.6.1.4

ostCfmMaTable

table
.1.3.6.1.4.1.7342.7.1.6.1 · 1 row entry · 2 columns
Open in standard view 
This table supports OST CFM MA settings.
ostCfmMaEntry entry .1.3.6.1.4.1.7342.7.1.6.1.1
OST CFM MA settings table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex
Column Syntax OID
ostCfmMaCcmTimeout
The CCM timeout setting in milliseconds. Default setting is 3.5x CCM interval.
Minimum setting is CCM interval, except for the GM4 which allows a setting of
10 ms. The GM3 only supports a minimum value of 100 ms.
Unsigned32r/w
Constraints:
range: 10-2100000
 .1.3.6.1.4.1.7342.7.1.6.1.1.1
ostCfmMaCcmSequence
This object selects whether CCM sequence numbers incremented.

noSequence(1) CCM sequence numbers are not incremented
sequence(2) CCM sequence numbers are incremented

The rows in this tabl…
Enumerationr/w
Enumerated Values:
1noSequence
2includeSequence
 .1.3.6.1.4.1.7342.7.1.6.1.1.2

ostCfmMepTable

table
.1.3.6.1.4.1.7342.7.1.6.2 · 1 row entry · 10 columns
Open in standard view 
This table supports OST CFM MEP settings.
ostCfmMepEntry entry .1.3.6.1.4.1.7342.7.1.6.2.1
OST CFM MEP settings table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier
Column Syntax OID
ostCfmMepLtmTimeout
The CFM LTM timeout setting in seconds. Default setting is 5 seconds.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7342.7.1.6.2.1.1
ostCfmMepLoopbackStatsClear
Writing any value to this object clears the contents of the ostCfmLoopbackStatistics object.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.2.1.2
ostCfmMepLbmFreqSelect
The frequency in milliseconds at which CFM LBMs are transmitted. Default setting is 1000.
Unsigned32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.7342.7.1.6.2.1.3
ostCfmMepLbmTimeout
The CFM LBM timeout setting in seconds. Default setting is 5 seconds.
Unsigned32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.7342.7.1.6.2.1.4
ostCfmMepLoopbackStatistics
CFM Loopback statistics.
OctetString
Constraints:
range: 0-1000
 .1.3.6.1.4.1.7342.7.1.6.2.1.5
ostCfmMepScomp
Writing any value to this object places the mep on a UNI port to be a part of the S-component.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.2.1.6
ostCfmMepRdiTx
true(1) indicates a RDI Tx.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.6.2.1.7
ostCfmMepProbeResponderType
This object is used to determine the probe responder type.
cpo(1) = disables responder
cpe(2) = enables probe info on a per EVC basis (default value)
cpp(3) = enables probe info on a fixed priority basis
cph(4) = enable…
Enumerationr/w
Enumerated Values:
1cpo
2cpe
3cpp
4cph
 .1.3.6.1.4.1.7342.7.1.6.2.1.8
ostCfmMepCtagVid
This object adds a C-Tag when the OAM PDU is initiated on an NNI
port. Normally an OAM frame on a NNI port only has a S-TAG.

The rows in this table are automatically created when a new row is
added to the…
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.6.2.1.9
ostCfmMepProbeResponderVer
This object is used to configure the probe responder version.
v1 = Original 2006 version, CCM not counted at same MEG level
v2 = Modified 2008 version, CCM counted at same MEG level
Enumerationr/w
Enumerated Values:
1v1
2v2
 .1.3.6.1.4.1.7342.7.1.6.2.1.10

ostCfmMipTable

table
.1.3.6.1.4.1.7342.7.1.6.3 · 1 row entry · 10 columns
Open in standard view 
This table supports MIP configuration and status display.
ostCfmMipEntry entry .1.3.6.1.4.1.7342.7.1.6.3.1
This table supports the configuration of Explicit MIP table entry by setting the
RowStatus to an entry of this table indexed by the Module index (ostModuleIndex),
the index (ostMdIndex) to the Management Domain (MD) tab…
Indexes
ostModuleIndex ostMdIndex ostMaIndex ostCfmMipIndex
Column Syntax OID
ostMdIndex
This is the index into the MD table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.3.1.1
ostMaIndex
This is the index into the MA table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.3.1.2
ostCfmMipIndex
This is the index into the Mip table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.3.1.3
ostCfmMipRowStatus
Status of the row. Used for row creation and destruction.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.6.3.1.4
ostCfmMipVid
This is the vid associated with the MIP. This variable
along with ostCfmMipIfIndex variable can only be set when
the ostCfmMipTable is created.
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.6.3.1.5
ostCfmMipIfIndex
This is the interface on which the MIP was created.
This variable along with ostCfmMipVid can only be set when
the ostCfmMipTable is created.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7342.7.1.6.3.1.6
ostCfmMipMdLevel
This is the MD level on which the MIP was created,
It is a read-only variable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.3.1.7
ostCfmMipCreatedMethod
This shows the method through which the MIP was created.
It can be ostExplicit(1), ostImplicitMa(2), ostImplicitMde(3),
ostExplicitImplicitMa(4) and is a read-only variable.
OMNITRON-TC-MIBOstMipdMethodOfCreation
Textual Convention: OMNITRON-TC-MIBOstMipdMethodOfCreation Enumeration
Type Values:
1ostExplicit
2ostImplicitMa
3ostImplicitMde
4ostExplicitImplicitMa
 .1.3.6.1.4.1.7342.7.1.6.3.1.8
ostCfmMipMhfCreation
A value indicating the how the MHFs (MIP Half Function) was created
for this VID at this MD Level. It is a read-only variable.
OMNITRON-TC-MIBOstMhfCreation
Textual Convention: OMNITRON-TC-MIBOstMhfCreation Enumeration
Type Values:
1ostMHFdefault
2ostMHFexplicit
 .1.3.6.1.4.1.7342.7.1.6.3.1.9
ostCfmMipScomp
Writing any value to this object places the mip on a UNI port to be a part of the S-component.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.6.3.1.10

ostCfmRmepTable

table
.1.3.6.1.4.1.7342.7.1.6.4 · 1 row entry · 3 columns
Open in standard view 
This table supports OST CFM RMEP settings and is used to explicitly
select an association of a local MEP with a RMEP. It only needs to be
configured if this there is an ambiguity of the association of a local
MEP and a remote MEP
ostCfmRmepEntry entry .1.3.6.1.4.1.7342.7.1.6.4.1
OST CFM RMEP settings table entry.
Indexes
IEEE8021-CFM-MIBdot1agCfmMdIndex IEEE8021-CFM-MIBdot1agCfmMaIndex IEEE8021-CFM-MIBdot1agCfmMepIdentifier IEEE8021-CFM-MIBdot1agCfmMepDbRMepIdentifier
Column Syntax OID
ostCfmRmepRowStatus
Status of the row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.6.4.1.1
ostCfmRmepLocalMep
This object is the local MEP associated with the explicit RMEP
IEEE8021-CFM-MIBDot1agCfmMepIdr/w
Textual Convention: IEEE8021-CFM-MIBDot1agCfmMepId Unsigned32
Type Constraints:
range: 1..8191
 .1.3.6.1.4.1.7342.7.1.6.4.1.2
ostCfmRmepPortNumber
The port number of the local MEP associated with the explicit RMEP
OMNITRON-TC-MIBOstPortListr/w
Textual Convention: OMNITRON-TC-MIBOstPortList OctetString
 .1.3.6.1.4.1.7342.7.1.6.4.1.3

ostCosTable

table
.1.3.6.1.4.1.7342.7.1.7.1 · 1 row entry · 26 columns
Open in standard view 
This table supports class of service settings.
ostCosEntry entry .1.3.6.1.4.1.7342.7.1.7.1.1
Class of service settings table entry.
Indexes
ostCosModuleIndex ostCosIndex
Column Syntax OID
ostCosModuleIndex
Chassis and module indices to which this CoS belongs.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.7.1.1.1
ostCosIndex
The identifier associated with this CoS.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7342.7.1.7.1.1.2
ostCosRowStatus
Status of the row. Used for row creation and destruction.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.7342.7.1.7.1.1.3
ostCosName
The identifier associated with this CoS.
OMNITRON-TC-MIBOstCosNameStringr/w
Textual Convention: OMNITRON-TC-MIBOstCosNameString OctetString
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.7.1.7.1.1.4
ostCosGreenPriority
Sets green traffic priority.
OMNITRON-TC-MIBOstPriorityr/w
Textual Convention: OMNITRON-TC-MIBOstPriority Unsigned32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7342.7.1.7.1.1.5
ostCosGreenCoS
Sets green traffic class of service.
OMNITRON-TC-MIBOstClassOfServicer/w
Textual Convention: OMNITRON-TC-MIBOstClassOfService Unsigned32
Type Constraints:
range: 0..4
 .1.3.6.1.4.1.7342.7.1.7.1.1.6
ostCosYellowPriority
Sets yellow traffic priority.
OMNITRON-TC-MIBOstPriorityr/w
Textual Convention: OMNITRON-TC-MIBOstPriority Unsigned32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7342.7.1.7.1.1.7
ostCosYellowCoS
Sets yellow traffic class of service.
OMNITRON-TC-MIBOstClassOfServicer/w
Textual Convention: OMNITRON-TC-MIBOstClassOfService Unsigned32
Type Constraints:
range: 0..4
 .1.3.6.1.4.1.7342.7.1.7.1.1.8
ostCosType
Selected bandwidth association type. Type of the last association set,
i.e. ostCosDscpPriority, ostCosL2cpId or ostCosPcpPriority.
This object is deprecated for write.
Enumeration
Enumerated Values:
0unused
1dscp
2l2cp
3pcp
4cfm
 .1.3.6.1.4.1.7342.7.1.7.1.1.9
ostCosDscpPriority
Class of Service profile associated with IP priority.
This object may not be modified after row creation.
OMNITRON-TC-MIBOstIpPriorityListr/w
Textual Convention: OMNITRON-TC-MIBOstIpPriorityList OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.7342.7.1.7.1.1.10
ostCosL2cpId
Class of Service profile associated with L2CP tunnel protocols.
This object may not be modified after row creation.
OMNITRON-TC-MIBOstCosL2cpDstAddrr/w
Textual Convention: OMNITRON-TC-MIBOstCosL2cpDstAddr Unsigned32
Type Constraints:
range: 1..20
 .1.3.6.1.4.1.7342.7.1.7.1.1.11
ostCosPcpPriority
Class of Service profile associated with Priority Code Point.
This object may not be modified after row creation.
OMNITRON-TC-MIBOstPcpPriorityListr/w
Textual Convention: OMNITRON-TC-MIBOstPcpPriorityList OctetString
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.7342.7.1.7.1.1.12
ostCosPriority
Sets class of service traffic priority.
OMNITRON-TC-MIBOstPriorityr/w
Textual Convention: OMNITRON-TC-MIBOstPriority Unsigned32
Type Constraints:
range: 0..7
 .1.3.6.1.4.1.7342.7.1.7.1.1.13
ostCosClass
Sets traffic class of service.
OMNITRON-TC-MIBOstClassOfServicer/w
Textual Convention: OMNITRON-TC-MIBOstClassOfService Unsigned32
Type Constraints:
range: 0..4
 .1.3.6.1.4.1.7342.7.1.7.1.1.14
ostCosTrust
Sets trust mode for this class of service. It can be set to trust
mode, Yellow/Green mode, or individual priority and class modes.
OMNITRON-TC-MIBOstCosTrustTyper/w
Textual Convention: OMNITRON-TC-MIBOstCosTrustType Enumeration
Type Values:
1cosTrust
2cosUsePri
3cosUseClass
4cosUsePriClass
5cosGreenYellow
 .1.3.6.1.4.1.7342.7.1.7.1.1.15
ostCosExtendedOn
A vector of bits that indicates what Interface Extended Filtering
options are selected.

A bit set to '1' selects the Extended Filtering option.

A bit set to '0' denotes the the Extended Fil…
Bitsr/w
Enumerated Values:
0bMacda
1bMacsa
2bEtype
3bVid
4bIpsrc
5bIpdst
6bL4src
7bL4dst
8bPcp
9bDscp
 .1.3.6.1.4.1.7342.7.1.7.1.1.16
ostCosExtendedMacda
This object specifies the Destination MAC for the Interface Extended
Filtering Option.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.7.1.1.17
ostCosExtendedMacsa
This object specifies the Source MAC for the Interface Extended
Filtering Option.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.7342.7.1.7.1.1.18
ostCosExtendedEtype
This object specifies the Ethertype for the Interface Extended
Filtering Option.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.7.1.1.19
ostCosExtendedVid
This object specifies the VLAN identification for the Interface Extended
Filtering Option.
OMNITRON-TC-MIBOstVlanIdr/w
Textual Convention: OMNITRON-TC-MIBOstVlanId Integer32
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.7342.7.1.7.1.1.20
ostCosExtendedIpsrc
This object specifies the Source IP address for the Interface Extended
Filtering Option.

Setting this object also impacts the ostCosExtendedIpsrcString
returned value. If an IPv4 address is written to thi…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.7.1.1.21
ostCosExtendedIpdst
This object specifies the Destination address for the Interface Extended
Filtering Option.

Setting this object also impacts the ostCosExtendedIpdstString
returned value. If an IPv4 address is written to t…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.7342.7.1.7.1.1.22
ostCosExtendedL4src
This object specifies the Layer 4 (TCP/UDP) Source port for the Interface Extended
Filtering Option.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.7.1.1.23
ostCosExtendedL4dst
This object specifies the Layer 4 (TCP/UDP) Destination port for the Interface Extended
Filtering Option.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.7342.7.1.7.1.1.24
ostCosExtendedIpsrcString
This object specifies the Source IPv4 or IPv6 address for the
Interface Extended Filtering Option.

Setting this object also impacts the ostCosExtendedIpsrc
returned value. If an IPv4 address is written to…
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.7.1.1.25
ostCosExtendedIpdstString
This object specifies the Destination IPv4 or IPv6 address for the
Interface Extended Filtering Option.

Setting this object also impacts the ostCosExtendedIpdst
returned value. If an IPv4 address is writt…
OMNITRON-TC-MIBOstIpAddrr/w
Textual Convention: OMNITRON-TC-MIBOstIpAddr OctetString
Type Constraints:
range: 0..39
 .1.3.6.1.4.1.7342.7.1.7.1.1.26

ostModcfgTable

table
.1.3.6.1.4.1.7342.7.1.8.1 · 1 row entry · 5 columns
Open in standard view 
This table enables the chassis master's management entity to read and save the slave's
configuration file or to write the saved slave's configuration file to the slave.  The
write operation does not activate the configuration at the slave, only updates the
slave's ini file.
          
Steps to use entries in this table:
          
1) Wait for ostModcfgReady value to be true. To do this do this sequence:
   a. an SNMP GET for both SnmpSetSerialNo and ostModcfgReady objects (in same SNMP PDU).
   b. Check if value for ostModcfgReady is true.
      - if not, wait x seconds, go to step a above.
      - if yes, save the value of SnmpSetSerialNo and go to step 2) below
          
2) Change ostModcfgReady value from true to false to ensure no other management entity
   will use the service. In order to not disturb a possible other NMS do this by sending
   an SNMP SET for both SnmpSetSerialNo and ostModcfgReady objects (in same SNMP PDU, and
   make sure SNmpSetSerialNo is the first varBind).
          
   For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures
   that two cooperating NMSes will not step on each others toes.
          
3) Setup the slave slot if differ from slot 2.
          
4) Set ostModcfgOpAction to get(1) or put (2) value to initiate command operation.
          
5) Check the value of ostModcfgLastStatus to find out if the operation was successfully completed.
          
6) Change the ostModcfgReady value back to true to allow other management entities to use the table.
ostModcfgEntry entry .1.3.6.1.4.1.7342.7.1.8.1.1
Modcfg operation table.
Indexes
ostModcfgModuleIndex
Column Syntax OID
ostModcfgModuleIndex
Chassis and module indices of the chassis master where it reads/writes the slave
configuration.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.8.1.1.1
ostModcfgSlotNumber
The slot number of slave to read or write configuration file. Slot 2 is default.
Unsigned32r/w
Constraints:
range: 2-19
 .1.3.6.1.4.1.7342.7.1.8.1.1.2
ostModcfgReady
Slave configuration read/write ready status. Network manager must wait for the value
of this variable to be true before setting up the read/write operation. If ready,
Network management then sets this variable to fals…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.8.1.1.3
ostModcfgOpAction
Operation type. Either get(1) or put(2) operation. Once set, the operation will start
Enumerationr/w
Enumerated Values:
0noop
1get
2put
 .1.3.6.1.4.1.7342.7.1.8.1.1.4
ostModcfgLastStatus
Status of the operation. Set value to busy(1) by agent when ostModcfgOpType is set to true and
sets value to ok(0) or failed(2) when operation is complete.
Enumeration
Enumerated Values:
0ok
1busy
2failed
 .1.3.6.1.4.1.7342.7.1.8.1.1.5

ostFwupdTable

table
.1.3.6.1.4.1.7342.7.1.9.1 · 1 row entry · 5 columns
Open in standard view 
This table enables the chassis master's management entity to update the firmware of a
slave module via the backplane using the FTP protocol.  The backplane must be enabled
between the master and slave module to work correctly.  The slave module will reboot
itself upon completion of the update.
          
Steps to use entries in this table:
          
1) Wait for ostFwupdgReady value to be true. To do this do this sequence:
   a. an SNMP GET for both SnmpSetSerialNo and ostFwupdgReady objects (in same SNMP PDU).
   b. Check if value for ostFwupdgReady is true.
      - if not, wait x seconds, go to step a above.
      - if yes, save the value of SnmpSetSerialNo and go to step 2) below
          
2) Change ostFwupdgReady value from true to false to ensure no other management entity
   will use the service. In order to not disturb a possible other NMS do this by sending
   an SNMP SET for both SnmpSetSerialNo and ostFwupdgReady objects (in same SNMP PDU, and
   make sure SNmpSetSerialNo is the first varBind).
          
   For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a.. This ensures
   that two cooperating NMSes will not step on each others toes.
          
3) Setup the slave slot if differ from slot 2.
          
4) Set ostFwupdAction to write(1) value to initiate command operation.
          
5) Check the value of ostFwupdLastStatus to find out if the operation was successfully completed.
          
6) Change the ostFwupdgReady value back to true to allow other management entities to use the table.
ostFwupdEntry entry .1.3.6.1.4.1.7342.7.1.9.1.1
Fwupd operation table.
Indexes
ostFwupdModuleIndex
Column Syntax OID
ostFwupdModuleIndex
Chassis and module indices of the chassis master where it updates the slave firmware.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.9.1.1.1
ostFwupdSlotNumber
The slot number of slave whose firmware is to be updated. Slot 2 is default.
Unsigned32r/w
Constraints:
range: 2-19
 .1.3.6.1.4.1.7342.7.1.9.1.1.2
ostFwupdReady
Slave firmware update ready status. Network manager must wait for the value
of this variable to be true before setting up the write operation. If ready,
Network management then sets this variable to false and subseque…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.9.1.1.3
ostFwupdAction
Operation type. Once set to write (1) value, the operation will start
Enumerationr/w
Enumerated Values:
0noop
1write
 .1.3.6.1.4.1.7342.7.1.9.1.1.4
ostFwupdLastStatus
Status of the operation. Set value to busy(1) by agent when ostFwupdAction is set to true and
sets value to ok(0) or failed(2) when operation is complete.
Enumeration
Enumerated Values:
0ok
1busy
2failed
 .1.3.6.1.4.1.7342.7.1.9.1.1.5

ostEgressSchedulingProfileTable

table
.1.3.6.1.4.1.7342.7.1.10.1 · 1 row entry · 3 columns
Open in standard view 
This table is used in conjuction with the ostEgressQueuetable to define the port queue Scheduling
attributes. ostNumSchedulingProfiles from the ostModuleSettingsTable will give the maximum number
of Scheduling Profiles.
ostEgressSchedulingProfileEntry entry .1.3.6.1.4.1.7342.7.1.10.1.1
Egress Scheduling profile settings table entry.
Indexes
ostEgressSchedulingProfileModuleIndex ostEgressSchedulingProfileIndex
Column Syntax OID
ostEgressSchedulingProfileModuleIndex
Chassis and module indices to which this schedule profile belongs.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.10.1.1.1
ostEgressSchedulingProfileIndex
The egress Scheduling Profile Index.
OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType
Textual Convention: OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType Unsigned32
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.7342.7.1.10.1.1.2
ostEgressSchedulingProfileQueueMode
Set the Profile Queueing to Fairweight, Starving or Mixed Mode.
If the values set for ostEgressQueueXSchedulingType &
ostEgressQueueXSchedulingWeight do not match the ostEgressSchedulingProfileQueueMode
equivalent, ostE…
Enumerationr/w
Enumerated Values:
0fairweight
1starving
2mixedMode
 .1.3.6.1.4.1.7342.7.1.10.1.1.3

ostEgressQueueSchedulingTable

table
.1.3.6.1.4.1.7342.7.1.11.1 · 1 row entry · 5 columns
Open in standard view 
This table is used in conjuction with the ostSchedulingProfileTable to
set Egress Scheduling Profile entries. Use ostNumPortEgressQueues from
the ostModuleSettingsTable to get the maximum number of Egress Queues.
ostEgressQueueSchedulingEntry entry .1.3.6.1.4.1.7342.7.1.11.1.1
Egress Queue settings table entry.
Indexes
ostEgressQueueSchedulingModuleIndex ostEgressQueueSchedulingProfileIndex ostEgressQueueSchedulingIndex
Column Syntax OID
ostEgressQueueSchedulingModuleIndex
Chassis and module indices to which this Egress Queue belongs.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.11.1.1.1
ostEgressQueueSchedulingProfileIndex
The index of the Scheduling profile.
OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType
Textual Convention: OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType Unsigned32
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.7342.7.1.11.1.1.2
ostEgressQueueSchedulingIndex
The index of the Egress Queue.
OMNITRON-TC-MIBOstEgressQueueIndexType
Textual Convention: OMNITRON-TC-MIBOstEgressQueueIndexType Unsigned32
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.7342.7.1.11.1.1.3
ostEgressQueueXSchedulingType
Egress Queue type.
Enumerationr/w
Enumerated Values:
0fairweight
1strictpriority
 .1.3.6.1.4.1.7342.7.1.11.1.1.4
ostEgressQueueXSchedulingWeight
Queue weight when ostEgressQueueXSchedulingType is configured to operate
in Fairweight (Round-Robin) Mode. Setting Zero will turn off Queueing on
the specified Queue.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.7342.7.1.11.1.1.5

ostEgressQueueTable

table
.1.3.6.1.4.1.7342.7.1.12.1 · 1 row entry · 3 columns
Open in standard view 
This table supports Queue configuration on per-interface basis.
ostEgressQueueEntry entry .1.3.6.1.4.1.7342.7.1.12.1.1
This is an Egress Queue table entry.
Indexes
ostEgressQueueInterfaceIndex ostEgressQueueIndex
Column Syntax OID
ostEgressQueueInterfaceIndex
Chassis, module and port indices to which this interface belongs.
OMNITRON-TC-MIBOstPortSingleIndex
Textual Convention: OMNITRON-TC-MIBOstPortSingleIndex Unsigned32
Type Constraints:
range: 10101..999999
 .1.3.6.1.4.1.7342.7.1.12.1.1.1
ostEgressQueueIndex
The index of the Egress Queue.
OMNITRON-TC-MIBOstEgressQueueIndexType
Textual Convention: OMNITRON-TC-MIBOstEgressQueueIndexType Unsigned32
Type Constraints:
range: 1..8
 .1.3.6.1.4.1.7342.7.1.12.1.1.2
ostEgressQueueCommittedEgressInformationRateQueueX
Committed Egress Information Rate Queue X in kb/sec.

The maximum value and default for 10G ports is 10000000.
The maximum value and default for 1G ports is 1000000.
Unsigned32r/w
Constraints:
range: 0-10000000
 .1.3.6.1.4.1.7342.7.1.12.1.1.3

ostFpgaUpdTable

table
.1.3.6.1.4.1.7342.7.1.13.1 · 1 row entry · 5 columns
Open in standard view 
This table enables the chassis master's management entity to update the FPGA firmware
of a module via a file residing on a module that was previously loaded by FTP.
          
Steps to use entries in this table:
          
1) Wait for ostFpgaUpdReady value to be true. To do this do this sequence:
   a. an SNMP GET for both SnmpSetSerialNo and ostFpgaUpdReady objects (in same SNMP PDU).
   b. Check if value for ostFpgaUpdReady is true.
      - if not, wait x seconds, go to step a above.
      - if yes, save the value of SnmpSetSerialNo and go to step 2) below
          
2) Change ostFpgaUpdReady value from true to false to ensure no other management entity
   will use the service. In order to not disturb a possible other NMS do this by sending
   an SNMP SET for both SnmpSetSerialNo and ostFgaUpdgReady objects (in same SNMP PDU, and
   make sure SNmpSetSerialNo is the first varBind).
          
   For the SnmpSetSerialNo varBind, use the value that you obtained in step 1)a. This ensures
   that two cooperating NMSes will not interfere with each other.
          
3) Set ostFpgaUpdAction to write(1) value to initiate command operation.
          
4) Check the value of ostFpgaUpdLastStatus to find out if the operation was successfully completed.
          
5) Change the ostFpgaUpdReady value back to true to allow other management entities to use the table.
ostFpgaUpdEntry entry .1.3.6.1.4.1.7342.7.1.13.1.1
FpgaUpd operation table.
Indexes
ostFwupdModuleIndex
Column Syntax OID
ostFpgaUpdModuleIndex
Chassis and module indices of the module that contains the FPGA.
OMNITRON-TC-MIBOstModuleSingleIndex
Textual Convention: OMNITRON-TC-MIBOstModuleSingleIndex Unsigned32
Type Constraints:
range: 101..9999
 .1.3.6.1.4.1.7342.7.1.13.1.1.1
ostFpgaUpdFileName
The FPGA firmware image used for updating the FPGA.
OMNITRON-TC-MIBOstFileNameStringr/w
Textual Convention: OMNITRON-TC-MIBOstFileNameString OctetString
Type Constraints:
range: 1..45
 .1.3.6.1.4.1.7342.7.1.13.1.1.2
ostFpgaUpdReady
FPGA update ready status. Network manager must wait for the value
of this variable to be true before setting up the write operation. If ready,
Network management then sets this variable to false and subsequently sets …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.7342.7.1.13.1.1.3
ostFpgaUpdAction
FPGA Firmware operation type.
noop (0) no action is taken
write (1) FPGA file is written
writeAndActivate(2) FPGA file is written and activated
activate (3) FPGA file is activated
Enumerationr/w
Enumerated Values:
0noop
1write
2writeAndActivate
3activate
 .1.3.6.1.4.1.7342.7.1.13.1.1.4
ostFpgaUpdLastStatus
Status of the operation. Set value to busy(1) by agent when ostFpgaUpdAction is set to
true and sets value to ok(0) or failed(2) when operation is complete.
Enumeration
Enumerated Values:
0ok
1busy
2failed
 .1.3.6.1.4.1.7342.7.1.13.1.1.5