ostEgressPolicingType
OMNITRON-EXT-MIB ·
.1.3.6.1.4.1.7342.7.1.3.1.1.26
Object
column
r/w
Enumeration
Sets the specific module egress policing mode which
is used to count bytes for egress bandwidth profile calculation
purposes. Applicable for the XM5 only.
policingL1(1) L1 includes all bytes in frame, interframe gap and
preamble
policingL2(2) L2 includes all bytes in frame, including
Layer 2 header and CRC
Context
- MIB
- OMNITRON-EXT-MIB
- OID
.1.3.6.1.4.1.7342.7.1.3.1.1.26- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostModuleSettingsEntry
- Table
- ostModuleSettingsTable
- Siblings
- 36
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | policingL1 |
2 | policingL2 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostModuleIndex The module chassis and slot numbers.
Base 10 Format: CCSS where
CC is the chassis index, 1 to 99
SS is the slot index, 1 to 99 | column | OMNITRON-TC-MIBOstModuleSingleIndex | .1.3.6.1.4.1.7342.7.1.3.1.1.1 |
| ostSntpServerIp2 SNTP server 2 IPv4 address.
Setting this object also impacts the ostSntpServerIp2String
returned value. If an IPv4 address is written to this object the
two objects… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.7.1.3.1.1.10 |
| ostSntpTimeZone Set the time zone.
1 GMT Greenwich Mean Time UTC
2 UTC Coordinated Universal Time UTC
3 WET Western European Time UTC
4 Z Zulu… | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.11 |
| ostSntpServerInterval SNTP server request interval in minutes. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.12 |
| ostDaytimeEnable Enable or disable Daytime protocol processing. Default setting is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.13 |
| ostDaytimeServerIp Daytime server IPv4 address.
Setting this object also impacts the ostDaytimeServerIpString
returned value. If an IPv4 address is written to this object the
two obje… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.7.1.3.1.1.14 |
| ostDaytimeServerType The Daytime server type, tcp or udp. Default setting is type udp. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.15 |
| ostDaytimeServerInterval Daytime server request interval in minutes. Default setting is 10 minutes. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.16 |
| ostCfmXcAutoLearning Enables or disables automatic learning of cross connecting remote MEPs. Default setting is off. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.17 |
| ostClearTrapLog Writing any value to this object causes the trap log to be cleared.
This is a write only object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.7.1.3.1.1.18 |
| ostSntpIpSrc SNTP source IP address number, default is 1 (IP1) | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.19 |
| ostEnableEvcProcessing Enable or disable EVC processing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.2 |
| ostDaytimeIpSrc Daytime source IP address number, default is 1 (IP1) | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.20 |
| ostNumEgressSchedulingProfiles A integer value for the number of Egress Scheduling Profiles per module.
Used with ostSchedulingProfile Table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.21 |
| ostNumPortEgressQueues A integer value for the number of Port Egress Queues per module.
Used with ostEgressQueue Table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.22 |
| ostClearMacTable Writing any value to this object causes the learned MAC addresses to be
cleared. This is a write only object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.7.1.3.1.1.23 |
| ostFixedCompId *** NOT SUPPORTED IN V5.3 ***
This object fixes the IEEE Comp ID to be the same as the port number or
dynamic based upon the port type selected (UNI or NNI).
… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.24 |
| ostSynceSource This object indicates the source of the port clocks for each of the
PHYs.
A value of 0 indicates that the source of the clock is from the on board
oscillator.
… | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.25 |
| ostFirmwareRestartType Sets whether the module is automatically restarted after the
firmware is updated or must be manually restarted.
auto(1) Module is automatically restarted aft… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.27 |
| ostFpgaRestartType Sets whether the module's FPGA is automatically restarted after the
firmware is updated or must be manually restarted.
auto(1) FPGA is automatically restarte… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.28 |
| ostGlobalPauseEnable Enable Pause on this module.
True indicates pause (flow control) is globally enabled.
False indicates pause (flow control) is globally disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.29 |
| ostCustomerEthertype Customer ethertype value. | column | Integer32 | .1.3.6.1.4.1.7342.7.1.3.1.1.3 |
| ostZtpEnable THis object configures the module Zero Touch provisioning modes.
noZtp(0) ZTP is disabled, standard startup operation
stdZtp(1) Standard Z… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.30 |
| ostSynceClockStatus This object indicates the status of the synchronous Ethernet (SyncE)
clock status if synce has been enabled via the ostSynceSource object.
Currently this object is … | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.31 |
| ostSntpServerIp1String SNTP server 1 IPv4 or IPv6 address.
Setting this object also impacts the ostSntpServerIp1
returned value. If an IPv4 address is written to this object the
two objec… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.7.1.3.1.1.32 |
| ostSntpServerIp2String SNTP server 2 IPv4 or IPv6 address.
Setting this object also impacts the ostSntpServerIp2
returned value. If an IPv4 address is written to this object the
two objec… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.7.1.3.1.1.33 |
| ostDaytimeServerIpString Daytime server IPv4 or IPv6 address.
Setting this object also impacts the ostDaytimeServerIp
returned value. If an IPv4 address is written to this object the
two ob… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.7.1.3.1.1.34 |
| ostModulePrompt This object specifies the CLI prompt. | column | OctetString | .1.3.6.1.4.1.7342.7.1.3.1.1.35 |
| ostModuleSplashWarning This object specifies the splash screen warning message for the
CLI. The message is displayed after the normal splash screen and
before the CLI prompt. | column | OctetString | .1.3.6.1.4.1.7342.7.1.3.1.1.36 |
| ostConsoleEnable This object enables or disables the serial console port
enabled(1) enable the serial console port, serial console port
works in a normal way
… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.37 |
| ostProviderEthertype Provider ethertype value. | column | Integer32 | .1.3.6.1.4.1.7342.7.1.3.1.1.4 |
| ostSaveSettings Writing any value to this object saves the current extension settings to flash.
This is a write only object. This object is used in conjunction with ostSaveStatus. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.7.1.3.1.1.5 |
| ostCfmTrapEnables This object is a bit string, where each bit controls whether a CFM trap is enabled or disabled.
When a bit is set to 1, the associated trap is enabled.
The trap con… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.6 |
| ostSnmpTrapPortNum This object configures the SNMP trap target port. The default value is 162. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.7 |
| ostSntpEnable Enable or disable SNTP processing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.8 |
| ostSntpServerIp1 SNTP server 1 IPv4 address.
Setting this object also impacts the ostSntpServerIp1String
returned value. If an IPv4 address is written to this object the
two objects… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.7.1.3.1.1.9 |