ostInterfaceMTU
OMNITRON-EXT-MIB ·
.1.3.6.1.4.1.7342.7.1.1.1.1.15
Object
column
r/w
Integer32
The ports ingress frame size. For the GM3, GM4, and GM4-PoE the
maximum frame size is 10240 bytes. For the XM5 the maximum frame
size is 10056 bytes.
The ports mgt1 and mgt2 are fixed to a frame size of 2048 and
cannot be changed. Writing the object will be ignored.
Setting the MTU size less than the minimum or maximum supported
will result in an SNMP error.
Context
- MIB
- OMNITRON-EXT-MIB
- OID
.1.3.6.1.4.1.7342.7.1.1.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostInterfaceEntry
- Table
- ostInterfaceTable
- Siblings
- 24
Syntax
Integer32
Values & Constraints
Object Constraints
range: 64-10240
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostInterfaceIndex Chassis, module and port indices to which this interface belongs. | column | OMNITRON-TC-MIBOstPortSingleIndex | .1.3.6.1.4.1.7342.7.1.1.1.1.1 |
| ostInterfaceRstpMacLearning RSTP MAC learning setting. Default setting is on. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.10 |
| ostInterfacePauseEnable Enable Pause on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.11 |
| ostInterfacePort The port associated with this interface. | column | OctetString | .1.3.6.1.4.1.7342.7.1.1.1.1.12 |
| ostInterfaceRJ45Mode The RJ45 mode for the port in a bit encoded value.
bit0 : 0 = Auto Negotiation, 1 = Manual
bit1 : 0 = 1000, 1 = 10/100
bit2 : 0 = 100, 1 = 10
bit3 : 0 = Full Duplex, 1 = Half Dupl… | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.13 |
| ostInterfaceUnkEnable *** This object is deprecated ***
Writing this object will have no effect.
Enable Unknown CFM PDU tunneling on this port.
True = enable
False =… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.14 |
| ostInterfaceTransmitDisable Enable/Disable the port transmission.
True = transmission is disabled
False = transmission is enabled
For a laser light is enabled/disabled.
For a copper port elec… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.16 |
| ostInterfaceAlsEnable Enable/Disable the auto link shutdown for the selected port.
True = Auto link shutdown is enabled
False = Auto link shutdown is disabled | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.17 |
| ostInterfaceEgressSchedulingProfileId The index of the Scheduling profile associated for the selected port. | column | OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType | .1.3.6.1.4.1.7342.7.1.1.1.1.18 |
| ostInterfaceLoopTimeout The ports loopback timeout in seconds.
0 disables the timeout.
The default value is 30 seconds | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.19 |
| ostInterfacePortName The identifier associated with this interface. | column | OctetString | .1.3.6.1.4.1.7342.7.1.1.1.1.2 |
| ostInterfaceLldpSelection This object indicates the LLDP port selection type.
undefined(0) Port LLDP type is undefined or unknown
standard(1) Port is a standard LLDP port ty… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.20 |
| ostInterfaceMirrorPortNumber This object indicates that the selected port, portnum, is acting
as a mirror port for the portMirrorPortNumber.
A value of '0' indicates normal port operation (no m… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.7.1.1.1.1.21 |
| ostInterfaceMirrorRatio This object sets the ratio of frames from the mirror port to the
listening port. For instance a value of '100' would send 1 out of 100
Ethernet frames to the mirror listening port… | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.22 |
| ostInterfaceThresholdViolation This object sets the interface utilization threshold value expressed
in milli-percent, where 1 indicates 0.001 percent. A threshold
violation is declared when the utilization is … | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.1.1.1.23 |
| ostInterfaceColor This objects sets the interface to color aware or color unaware (color
blind) mode.
unaware(1) Port is configured in color unaware mode. Traffic t… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.24 |
| ostInterfaceManagement This objects set the port to be a standard port or a dedicated
management port.
standard(1) Port is configured as a standard port that follows the
… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.25 |
| ostInterfaceType The interface type, UNI or NNI, associated with this interface. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.3 |
| ostInterfaceComponentID Component ID to which the port is assigned. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.1.1.1.4 |
| ostInterfaceSfpMode Set the SFP mode.
undefined = no SFP (read only)
auto = examines diagnostic SFP ROM for speed & mode
force100 = forces 100 Mbps SERDES mode
force1000 = forces 1000 Mbps SERD… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.5 |
| ostInterfaceCfmEnable Enable CFM on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.6 |
| ostInterfaceCommittedEgressInformationRate Committed Egress Information Rate in kb/sec.
The maximum value and default for 10G ports is 10000000.
The maximum value and default for 1G ports is 1000000. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.1.1.1.7 |
| ostInterfaceQueueType Egress queue type. This object is deprecated. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.8 |
| ostInterfaceLpbkEnable Enable loopback on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.9 |