ostSaveSettings
OMNITRON-EXT-MIB ·
.1.3.6.1.4.1.7342.7.1.3.1.1.5
Object
Writing any value to this object saves the current extension settings to flash. This is a write only object. This object is used in conjunction with ostSaveStatus.
Context
- MIB
- OMNITRON-EXT-MIB
- OID
.1.3.6.1.4.1.7342.7.1.3.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostModuleSettingsEntry
- Table
- ostModuleSettingsTable
- Siblings
- 36
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostModuleIndex The module chassis and slot numbers.
Base 10 Format: CCSS where
CC is the chassis index, 1 to 99
SS is the slot index, 1 to 99 | column | OMNITRON-TC-MIBOstModuleSingleIndex | .1.3.6.1.4.1.7342.7.1.3.1.1.1 |
| ostSntpServerIp2 SNTP server 2 IPv4 address.
Setting this object also impacts the ostSntpServerIp2String
returned value. If an IPv4 address is written to this object the
two objects… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.7.1.3.1.1.10 |
| ostSntpTimeZone Set the time zone.
1 GMT Greenwich Mean Time UTC
2 UTC Coordinated Universal Time UTC
3 WET Western European Time UTC
4 Z Zulu… | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.11 |
| ostSntpServerInterval SNTP server request interval in minutes. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.12 |
| ostDaytimeEnable Enable or disable Daytime protocol processing. Default setting is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.13 |
| ostDaytimeServerIp Daytime server IPv4 address.
Setting this object also impacts the ostDaytimeServerIpString
returned value. If an IPv4 address is written to this object the
two obje… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.7.1.3.1.1.14 |
| ostDaytimeServerType The Daytime server type, tcp or udp. Default setting is type udp. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.15 |
| ostDaytimeServerInterval Daytime server request interval in minutes. Default setting is 10 minutes. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.16 |
| ostCfmXcAutoLearning Enables or disables automatic learning of cross connecting remote MEPs. Default setting is off. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.17 |
| ostClearTrapLog Writing any value to this object causes the trap log to be cleared.
This is a write only object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.7.1.3.1.1.18 |
| ostSntpIpSrc SNTP source IP address number, default is 1 (IP1) | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.19 |
| ostEnableEvcProcessing Enable or disable EVC processing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.2 |
| ostDaytimeIpSrc Daytime source IP address number, default is 1 (IP1) | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.20 |
| ostNumEgressSchedulingProfiles A integer value for the number of Egress Scheduling Profiles per module.
Used with ostSchedulingProfile Table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.21 |
| ostNumPortEgressQueues A integer value for the number of Port Egress Queues per module.
Used with ostEgressQueue Table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.22 |
| ostClearMacTable Writing any value to this object causes the learned MAC addresses to be
cleared. This is a write only object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7342.7.1.3.1.1.23 |
| ostFixedCompId *** NOT SUPPORTED IN V5.3 ***
This object fixes the IEEE Comp ID to be the same as the port number or
dynamic based upon the port type selected (UNI or NNI).
… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.24 |
| ostSynceSource This object indicates the source of the port clocks for each of the
PHYs.
A value of 0 indicates that the source of the clock is from the on board
oscillator.
… | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.25 |
| ostEgressPolicingType Sets the specific module egress policing mode which
is used to count bytes for egress bandwidth profile calculation
purposes. Applicable for the XM5 only.
policingL… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.26 |
| ostFirmwareRestartType Sets whether the module is automatically restarted after the
firmware is updated or must be manually restarted.
auto(1) Module is automatically restarted aft… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.27 |
| ostFpgaRestartType Sets whether the module's FPGA is automatically restarted after the
firmware is updated or must be manually restarted.
auto(1) FPGA is automatically restarte… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.28 |
| ostGlobalPauseEnable Enable Pause on this module.
True indicates pause (flow control) is globally enabled.
False indicates pause (flow control) is globally disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.29 |
| ostCustomerEthertype Customer ethertype value. | column | Integer32 | .1.3.6.1.4.1.7342.7.1.3.1.1.3 |
| ostZtpEnable THis object configures the module Zero Touch provisioning modes.
noZtp(0) ZTP is disabled, standard startup operation
stdZtp(1) Standard Z… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.30 |
| ostSynceClockStatus This object indicates the status of the synchronous Ethernet (SyncE)
clock status if synce has been enabled via the ostSynceSource object.
Currently this object is … | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.31 |
| ostSntpServerIp1String SNTP server 1 IPv4 or IPv6 address.
Setting this object also impacts the ostSntpServerIp1
returned value. If an IPv4 address is written to this object the
two objec… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.7.1.3.1.1.32 |
| ostSntpServerIp2String SNTP server 2 IPv4 or IPv6 address.
Setting this object also impacts the ostSntpServerIp2
returned value. If an IPv4 address is written to this object the
two objec… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.7.1.3.1.1.33 |
| ostDaytimeServerIpString Daytime server IPv4 or IPv6 address.
Setting this object also impacts the ostDaytimeServerIp
returned value. If an IPv4 address is written to this object the
two ob… | column | OMNITRON-TC-MIBOstIpAddr | .1.3.6.1.4.1.7342.7.1.3.1.1.34 |
| ostModulePrompt This object specifies the CLI prompt. | column | OctetString | .1.3.6.1.4.1.7342.7.1.3.1.1.35 |
| ostModuleSplashWarning This object specifies the splash screen warning message for the
CLI. The message is displayed after the normal splash screen and
before the CLI prompt. | column | OctetString | .1.3.6.1.4.1.7342.7.1.3.1.1.36 |
| ostConsoleEnable This object enables or disables the serial console port
enabled(1) enable the serial console port, serial console port
works in a normal way
… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.3.1.1.37 |
| ostProviderEthertype Provider ethertype value. | column | Integer32 | .1.3.6.1.4.1.7342.7.1.3.1.1.4 |
| ostCfmTrapEnables This object is a bit string, where each bit controls whether a CFM trap is enabled or disabled.
When a bit is set to 1, the associated trap is enabled.
The trap con… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.6 |
| ostSnmpTrapPortNum This object configures the SNMP trap target port. The default value is 162. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.3.1.1.7 |
| ostSntpEnable Enable or disable SNTP processing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.3.1.1.8 |
| ostSntpServerIp1 SNTP server 1 IPv4 address.
Setting this object also impacts the ostSntpServerIp1String
returned value. If an IPv4 address is written to this object the
two objects… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.7342.7.1.3.1.1.9 |