ostInterfaceColor
OMNITRON-EXT-MIB ·
.1.3.6.1.4.1.7342.7.1.1.1.1.24
Object
column
r/w
Enumeration
This objects sets the interface to color aware or color unaware (color
blind) mode.
unaware(1) Port is configured in color unaware mode. Traffic that
ingresses a port is classified as 'green'
aware(2) Port is configured in color aware mode. Traffic that
ingresses a port is classied as 'green' or 'yellow'
dependent upon the color marking for the module.
This object is supported by the XM5.
Context
- MIB
- OMNITRON-EXT-MIB
- OID
.1.3.6.1.4.1.7342.7.1.1.1.1.24- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostInterfaceEntry
- Table
- ostInterfaceTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unaware |
2 | aware |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostInterfaceIndex Chassis, module and port indices to which this interface belongs. | column | OMNITRON-TC-MIBOstPortSingleIndex | .1.3.6.1.4.1.7342.7.1.1.1.1.1 |
| ostInterfaceRstpMacLearning RSTP MAC learning setting. Default setting is on. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.10 |
| ostInterfacePauseEnable Enable Pause on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.11 |
| ostInterfacePort The port associated with this interface. | column | OctetString | .1.3.6.1.4.1.7342.7.1.1.1.1.12 |
| ostInterfaceRJ45Mode The RJ45 mode for the port in a bit encoded value.
bit0 : 0 = Auto Negotiation, 1 = Manual
bit1 : 0 = 1000, 1 = 10/100
bit2 : 0 = 100, 1 = 10
bit3 : 0 = Full Duplex, 1 = Half Dupl… | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.13 |
| ostInterfaceUnkEnable *** This object is deprecated ***
Writing this object will have no effect.
Enable Unknown CFM PDU tunneling on this port.
True = enable
False =… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.14 |
| ostInterfaceMTU The ports ingress frame size. For the GM3, GM4, and GM4-PoE the
maximum frame size is 10240 bytes. For the XM5 the maximum frame
size is 10056 bytes.
The ports mgt1… | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.15 |
| ostInterfaceTransmitDisable Enable/Disable the port transmission.
True = transmission is disabled
False = transmission is enabled
For a laser light is enabled/disabled.
For a copper port elec… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.16 |
| ostInterfaceAlsEnable Enable/Disable the auto link shutdown for the selected port.
True = Auto link shutdown is enabled
False = Auto link shutdown is disabled | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.17 |
| ostInterfaceEgressSchedulingProfileId The index of the Scheduling profile associated for the selected port. | column | OMNITRON-TC-MIBOstEgressSchedulingProfileIndexType | .1.3.6.1.4.1.7342.7.1.1.1.1.18 |
| ostInterfaceLoopTimeout The ports loopback timeout in seconds.
0 disables the timeout.
The default value is 30 seconds | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.19 |
| ostInterfacePortName The identifier associated with this interface. | column | OctetString | .1.3.6.1.4.1.7342.7.1.1.1.1.2 |
| ostInterfaceLldpSelection This object indicates the LLDP port selection type.
undefined(0) Port LLDP type is undefined or unknown
standard(1) Port is a standard LLDP port ty… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.20 |
| ostInterfaceMirrorPortNumber This object indicates that the selected port, portnum, is acting
as a mirror port for the portMirrorPortNumber.
A value of '0' indicates normal port operation (no m… | column | OMNITRON-TC-MIBOstPortNumber | .1.3.6.1.4.1.7342.7.1.1.1.1.21 |
| ostInterfaceMirrorRatio This object sets the ratio of frames from the mirror port to the
listening port. For instance a value of '100' would send 1 out of 100
Ethernet frames to the mirror listening port… | column | Integer32 | .1.3.6.1.4.1.7342.7.1.1.1.1.22 |
| ostInterfaceThresholdViolation This object sets the interface utilization threshold value expressed
in milli-percent, where 1 indicates 0.001 percent. A threshold
violation is declared when the utilization is … | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.1.1.1.23 |
| ostInterfaceManagement This objects set the port to be a standard port or a dedicated
management port.
standard(1) Port is configured as a standard port that follows the
… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.25 |
| ostInterfaceType The interface type, UNI or NNI, associated with this interface. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.3 |
| ostInterfaceComponentID Component ID to which the port is assigned. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.1.1.1.4 |
| ostInterfaceSfpMode Set the SFP mode.
undefined = no SFP (read only)
auto = examines diagnostic SFP ROM for speed & mode
force100 = forces 100 Mbps SERDES mode
force1000 = forces 1000 Mbps SERD… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.5 |
| ostInterfaceCfmEnable Enable CFM on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.6 |
| ostInterfaceCommittedEgressInformationRate Committed Egress Information Rate in kb/sec.
The maximum value and default for 10G ports is 10000000.
The maximum value and default for 1G ports is 1000000. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.1.1.1.7 |
| ostInterfaceQueueType Egress queue type. This object is deprecated. | column | Enumeration | .1.3.6.1.4.1.7342.7.1.1.1.1.8 |
| ostInterfaceLpbkEnable Enable loopback on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.1.1.1.9 |