ostCfmMepCtagVid
OMNITRON-EXT-MIB ·
.1.3.6.1.4.1.7342.7.1.6.2.1.9
Object
This object adds a C-Tag when the OAM PDU is initiated on an NNI
port. Normally an OAM frame on a NNI port only has a S-TAG.
The rows in this table are automatically created when a new row is
added to the CFM MEP table. If not defined or defined to be a '0'
during creation time no CE-VLAN Tag is included in the OAM PDU.
Context
- MIB
- OMNITRON-EXT-MIB
- OID
.1.3.6.1.4.1.7342.7.1.6.2.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ostCfmMepEntry
- Table
- ostCfmMepTable
- Siblings
- 9
Syntax
OMNITRON-TC-MIBOstVlanId
- Source
- OMNITRON-TC-MIBOstVlanId
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ostCfmMepLtmTimeout The CFM LTM timeout setting in seconds. Default setting is 5 seconds. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.6.2.1.1 |
| ostCfmMepProbeResponderVer This object is used to configure the probe responder version.
v1 = Original 2006 version, CCM not counted at same MEG level
v2 = Modified 2008 version, CCM counted at same MEG lev… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.6.2.1.10 |
| ostCfmMepLoopbackStatsClear Writing any value to this object clears the contents of the ostCfmLoopbackStatistics object. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.6.2.1.2 |
| ostCfmMepLbmFreqSelect The frequency in milliseconds at which CFM LBMs are transmitted. Default setting is 1000. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.6.2.1.3 |
| ostCfmMepLbmTimeout The CFM LBM timeout setting in seconds. Default setting is 5 seconds. | column | Unsigned32 | .1.3.6.1.4.1.7342.7.1.6.2.1.4 |
| ostCfmMepLoopbackStatistics CFM Loopback statistics. | column | OctetString | .1.3.6.1.4.1.7342.7.1.6.2.1.5 |
| ostCfmMepScomp Writing any value to this object places the mep on a UNI port to be a part of the S-component. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.7342.7.1.6.2.1.6 |
| ostCfmMepRdiTx true(1) indicates a RDI Tx. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.7342.7.1.6.2.1.7 |
| ostCfmMepProbeResponderType This object is used to determine the probe responder type.
cpo(1) = disables responder
cpe(2) = enables probe info on a per EVC basis (default value)
cpp(3) = enables probe info o… | column | Enumeration | .1.3.6.1.4.1.7342.7.1.6.2.1.8 |