LUM-OA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
143

oaIfTable

table
.1.3.6.1.4.1.8708.2.19.2.2.1 · 1 row entry · 61 columns
Open in standard view 
The interface list.
oaIfEntry entry .1.3.6.1.4.1.8708.2.19.2.2.1.1
An entry in the interface list.
Indexes
oaIfIndex
Column Syntax OID
oaIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.1
oaIfName
The management name of the interface, for
example 'oa:1:2:1-2', where the first number
indicates sub-rack, the second slot number and
the third is the port number.
Examples:

oa:s:s:p - Optical amplifier i…
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.2
oaIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.3
oaIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.4
oaIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.5
oaIfTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.6
oaIfRxPort
The number of the port where the RX-side of
the interface is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.7
oaIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.8
oaIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.9
oaIfOperStatus
The operational state for the interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the 'up'-s…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.10
oaIfLaserStatus
The operational state of the laser.

off - The laser is turned off.

on - The laser is turned on.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.11
oaIfAmplifierType
The type of amplifier for this interface.

preAmp25GAd - pre-amplifier for 2.5 G,
add-drop

preAmp25GTm - pre-amplifier for 2.5 G,
terminal multiplexor

powAmp10G - power ampli…
Enumerationr/w
Enumerated Values:
1pre25ad
2pre25tm
3pow10
4pre10ad
5pre10tm
6constantGain
7constantSignalPower
8constantPower
9constantGainLI
10constantGainHI
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.12
oaIfWantedAbsolutePowerLevel
For powAmp10G and constantPower, the
user can give the wanted absolute power level
in units of 0.1 dBm.

For OA10 and OA17 in constantGain and
constantSignalPower, this parameter shows the
derived absolute…
Integer32r/w
Constraints:
range: 0-195
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.13
oaIfWantedRelativePowerLevel
Wanted offset from production setting in units
of 0.1 dBm.
Applicable for preAmp25GAd and preAmp10GAd.

Note that the output power level is dependent on
the power of the input signal, so you might not
alwa…
Integer32r/w
Constraints:
range: -60-60
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.14
oaIfWantedGain
Signal gain setting in units of 0.1 dB.
Applicable for preAmp25GTm, preAmp10GTm
and constantGain/LI/HI.

This attribute can be written via SNMP.
Integer32r/w
Constraints:
range: 130-330
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.15
oaIfFrequencyMin
Lowest amplified freqency in hundreds of
GHz (0.01 GHz).

Supported range 19210 ... 19590 (c921 .. c959)
LUM-TCLambdaFrequencyr/w
Textual Convention: LUM-TCLambdaFrequency Enumeration
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.16
oaIfFrequencyMax
Highest amplified freqency in hundreds of
GHz (0.01 GHz).

Supported range 19210 ... 19590 (c921 .. c959)
LUM-TCLambdaFrequencyr/w
Textual Convention: LUM-TCLambdaFrequency Enumeration
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.17
oaIfNominalTxPower
The production setting for output power in
units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.18
oaIfTxPowerLevel
The transmitted power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.19
oaIfRxPowerLevel
The received power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.20
oaIfRxPowerLevelLowThreshold
The lower threshold for received power level
relative to the loss of signal threshold,
in units of 0.1 dB.
Integer32r/w
Constraints:
range: -50-80
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.21
oaIfLaserBias
Measures laser bias current value in tenths of
mA (0.1 mA).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.22
oaIfNominalLaserTemp
The pre-set laser temperature (0.1 deg C)
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.23
oaIfRelativeLaserTemp
The current offset from the pre-set temperature
in units of 0.1 degrees centigrade.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.24
oaIfLossOfSignalThreshold
The threshold for loss of signal.

Note: Depending on the type of optical amplifier
the value range may vary.
Integer32r/w
Constraints:
range: -560-80
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.25
oaIfLossOfSignal
Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.26
oaIfPumpLaserTempHigh
Pump laser temperature too high.

A(ctivation): Temperature exceedes threshold.

D(e-activation): Temperature below threshold
again.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.27
oaIfRegulationProblemRxPowerHigh
The input power is above meassuring range.

A: The received power level exceeds the
associated threshold.

D: The received power level is 0.5 dBm below
the threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.28
oaIfRegulationProblemTxPowerHigh
The output power is above meassuring range.

A: The received power level exceeds the
associated threshold.

D: The received power level is 0.5 dBm below
the threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.29
oaIfRegulationProblemTxPowerLow
The output power is below meassuring range.

A: The transmitted power level below the associated
threshold.

D: The transmitted power level is 0.5 dBm above the
threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.30
oaIfReceivedPowerLow
Received power level low threshold exceeded.

A: The received power level is below the
associated threshold.

D: The received power level is 0.5 dBm above the
threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.31
oaIfLaserBiasHigh
Laser bias high threshold exceeded.

A: The laser bias current exceeds the associated
threshold.

D: The laser bias current is 0.5 mA below the
associated threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.32
oaIfLaserTempControlFault
The pump laser temperature exceeds the
associated threshold.

A: The temperature exceeds the value.

D: The temperature is below the value.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.33
oaIfHwMissing deprecated
The HW for this i/f is not present

A: Wrong HW is inserted in subrack.

D: Correct HW is inserted in subrack.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.34
oaIfConfigurationCommand
Select which amplifier type to use. All modes are not applicable
for all type of amplifier boards.

constantGain: Amplifier will set output power according to
the input power an…
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.35
oaIfPumpLaserTempLow
Pump laser temperature too low.

A(ctivation): Temperature exceedes threshold.

D(e-activation): Temperature above threshold
again.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.36
oaIfLaserTempLowRelativeThreshold
Threshold for the Laser Temp Low alarm, expressed
as an offset from a pre-set nominal temperature,
in units of 0.1 degrees centigrade.
Integer32r/w
Constraints:
range: -100-150
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.37
oaIfLaserTempHighRelativeThreshold
Threshold for the Laser Temp High alarm, expressed
as an offset from a pre-set nominal temperature,
in units of 0.1 degrees centigrade.
Integer32r/w
Constraints:
range: -250-450
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.38
oaIfAmpTypeNotSupportedByHw
The HW revision does not support
the selected amplifier type.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.39
oaIfWantedSignalPowerLevel
Wanted offset from production setting in units
of 0.1 dBm.
Applicable for preAmp25GAd and preAmp10GAd.

Note that the output power level is dependent on
the power of the input signal, so you might not
alwa…
Integer32r/w
Constraints:
range: -150--50
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.40
oaIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.41
oaIfLaserForcedOn
When enabled, the laser is on regardless of whether
there is an input signal present or not.

disabled - the laser is only on when there is an
input signal.

enabled - the laser is…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.42
oaIfActualLaserTemp
The current laser temperature
in units of 0.1 degrees centigrade.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.43
oaIfAutomaticPowerShutdown
When enabled, the laser is turned off if
the input signal to the other gain block
is lost.

disabled - the laser is NOT affected by
the other gain block.

enabled - the laser is tu…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.44
oaIfDisabled
The interface is disabled.

A: Interface disabled.

D: Interface enabled.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.45
oaIfWantedPowerLimit
Applicable for constantGainLI/HI.

Sets the maximum allowed output power.

This attribute can be written via SNMP.
Integer32r/w
Constraints:
range: -70-195
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.46
oaIfModuleInfo
Information (for example firmware and serial number) about
the module.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.47
oaIfMonitorInsertionLoss
The insertion loss for the monitor port.
When the real insertion loss is not possible
to read from unit (older HW revsions), 20
(default) dB will be shown which is the
normal value.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.48
oaIfNumMonitorInsertionLoss
This is the same parameter as Monitor Port
Insertion Loss. The difference is that you
will not see if the value can be read from
the port or not (if not 20 dB will be shown).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.49
oaIfFunctionalType
The functional type of amplifier. This attribute is ONLY used
by TNM and the traffic is not affected if changed.

undefined - default

preAmp - pre-amplifier. Receiving amplifier o…
Enumerationr/w
Enumerated Values:
1undefined
2preAmp
3offLinePreAmp
4lineAmp
5booster
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.50
oaIfActualGain
Actual measured gain in units of 0.1 dB.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.51
oaIfSaturationFault
Saturation alarm threshold is passed. Actual Gain < (Wanted
Gain -1 dB). The alarm can be cleared be cleared by reducing
the wanted gain attribute.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.52
oaIfWantedGainTilt
Settable gain tilt for variable gain OA in units of 0.1 dB.
Positive gain tilt is defined as gain increasing wavelength.
Negative gain tilt is defined as gain decreasing wavelength.
Integer32r/w
Constraints:
range: -20-20
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.53
oaIfTxPowerLevelLowThreshold
The lower threshold for transmitted power level
transmits to the loss of signal threshold,
in units of 0.1 dB.
Integer32r/w
Constraints:
range: 0-207
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.54
oaIfLaserPumpBias
Measures laser pump bias current in
per cent (%) of max value.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.55
oaIfCaseTempOutOfrange
The module has shutdown automatically because of
too high case temp (>85 degC) or too low case
temp (-40 degC).

A(ctivation): Case temperature exceedes pre-set
temp range.

D(e-activation): …
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.56
oaIfLaserTempOutOfRange
the module has shutdown automatically because of
pump laser temp out of range (15-35 degC).

A(ctivation): Laser temperature exceedes pre-set value.

D(e-activation): Laser temperature below …
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.57
oaIfSupportsReadMonitorInsertionLoss
This value tells whether a OA interface has the ability
to read the insertion loss value for the monitor port on
an interface.

true: Insertion loss can be read for this interface
false: Insertion loss can…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.58
oaIfTxSignalStatus
The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…
Enumeration
Enumerated Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.59
oaIfRxSignalStatus
The operational state for incoming (RX) signal
of the interface.

down - A major fault has occurred

degraded - The signal quality is impaired.

up - The signal is OK.
…
Enumeration
Enumerated Values:
1down
2degraded
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.60
oaIfOutputPowerFail
Output power failed alarm threshold is passed. Actual Gain < (Wanted
Gain -1 dB) and Output Power < (Power Limit -1 dB).
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.2.1.1.61

oaVoaIfTable

table
.1.3.6.1.4.1.8708.2.19.2.4.1 · 1 row entry · 22 columns
Open in standard view 
The interface list.
oaVoaIfEntry entry .1.3.6.1.4.1.8708.2.19.2.4.1.1
An entry in the interface list.
Indexes
oaVoaIfIndex
Column Syntax OID
oaVoaIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.1
oaVoaIfName
The management name of the interface,
for example 'voa:1:2:1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.2
oaVoaIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.3
oaVoaIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.4
oaVoaIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.5
oaVoaIfTxPort
The number of the port where the TX part of
the interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.6
oaVoaIfRxPort
The number of the port where the RX part of
the interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.7
oaVoaIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.8
oaVoaIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.9
oaVoaIfOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is not used.

up - The interface is active.
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.10
oaVoaIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.11
oaVoaIfControlMode
The control mode of the VOA channel.

constPower - regulate slowly towards a given
output power.

constAttenuation - set a fix attenuation

constPowerAtInstallation…
Enumerationr/w
Enumerated Values:
1constPower
2constAttenuation
3constPowerAtInstallation
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.12
oaVoaIfWantedOutputPower
The wanted output power.

Applicable for constPower.
Integer32r/w
Constraints:
range: -300-170
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.13
oaVoaIfCurrentOutputPower
The actual output power.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.14
oaVoaIfRegulationRange
An offset below the wanted output power
at which the 'Current Power Out Of Range'
alarm shall be raised.

When the current output power is so
far below the wanted output power,
the regulation stops and the…
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.15
oaVoaIfWantedAttenuation
The wanted attenuation.

voa8ch: applicable for constAttenuation
voa2ch: always applicable

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.16
oaVoaIfCurrentAttenuation
The current attenuation.

Applicable for constPower.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.17
oaVoaIfSamplePeriod
The approximate period between 2
consecutive measurements of the output
power
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.18
oaVoaIfOuputPowerControlFailure
Alarm raised when the wanted output power
can not be obtained. That is, even if the
attenuation is reduced to zero, the wanted
power can not be obtained.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.19
oaVoaIfCurrentPowerOutOfRange
Alarm raised when the current output power
is outside the 'regulation range'.

The regulation range is defined by

Wanted Output Power +/- Regulation Range

At this point, no re…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.20
oaVoaIfConfigurationCommand
Select which control mode to use:

constPower
constAttenuation
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.21
oaVoaIfInInstallationMode
Alarm raised when the VOA is put in the
mode constPowerAtInstallation.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.4.1.1.22

oaVoaClientIfTable

table
.1.3.6.1.4.1.8708.2.19.2.5.1 · 1 row entry · 28 columns
Open in standard view 
The interface list.
oaVoaClientIfEntry entry .1.3.6.1.4.1.8708.2.19.2.5.1.1
An entry in the interface list.
Indexes
oaVoaClientIfIndex
Column Syntax OID
oaVoaClientIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.1
oaVoaClientIfName
The management name of the interface,
for example 'voaClient:1:2:1' which
indicates subrack 1, board 2 and port 1.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.2
oaVoaClientIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.3
oaVoaClientIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.4
oaVoaClientIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.5
oaVoaClientIfTxPort
The number of the port where the Tx part of
the interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.6
oaVoaClientIfRxPort
The number of the port where the Rx part of
the interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.7
oaVoaClientIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.8
oaVoaClientIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.9
oaVoaClientIfOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is not used.

up - The interface is active.
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.10
oaVoaClientIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.11
oaVoaClientIfControlMode
The control mode of the VOA channel.

constAttenuation - set a fix attenuation
Enumerationr/w
Enumerated Values:
1constAttenuation
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.12
oaVoaClientIfWantedAttenuation
The wanted attenuation.

Applicable for constAttenuation

This attribute can be written via SNMP if not set to 2147483647.
Unsigned32r/w
Constraints:
range: 2147483647-2147483647
range: 0-200
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.13
oaVoaClientIfCurrentAttenuation
The current attenuation.

Applicable in case of MDU40 boards.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.14
oaVoaClientIfLambda
The frequency given in hundreds of GHz
(0.01 GHz). Set to 0 for transparent ports.
LUM-TCLambdaFrequency
Textual Convention: LUM-TCLambdaFrequency Enumeration
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.15
oaVoaClientIfAbsoluteAttenuation
The wanted absolute attenuation including
the insertion loss. This value can never be
set below the upper limit of the insertion loss.

VOA8CHSFP: The range is dependent on the
inserted VOA SFP.
…
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.16
oaVoaClientIfVoa2CurrentAttenuation
This value shows the current set absolute attenua-
tion on VOA8ch-II and voa8chsfp. This value is
usually the same value as the absolute attenuation
except when a decrase or increase of attenuation is
ongoing or when a…
Unsigned32
Constraints:
range: 0-300
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.17
oaVoaClientIfDecreaseAttenuation
The wanted decrease of the current attenuation.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.18
oaVoaClientIfIncreaseAttenuation
The wanted increase of the current attenuation.

This attribute can be written via SNMP.
Unsigned32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.19
oaVoaClientIfInsertionLoss
The insertion loss for the port. The attenuation
can never be set to a value below this value.
Unsigned32
Constraints:
range: 0-200
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.20
oaVoaClientIfExpectedFrequency
The frequency given in hundreds of GHz
(0.01 GHz). This value is only used for
presentation purposes in name of port.
LUM-TCLambdaFrequencyr/w
Textual Convention: LUM-TCLambdaFrequency Enumeration
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.21
oaVoaClientIfSfpMissing
An expected VOA SFP is missing.

A(ctivation): An expected SFP is missing.

D(e-activation): The missing SFP is inserted.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.22
oaVoaClientIfSfpClass
String that contains general information about
the SFP.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.23
oaVoaClientIfSfpTransmitterFailed
The SFP has detected a failure
in the transmitter part.

A(ctivation): The transmitter has failed

D(e-activation): The transmitter is OK again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.24
oaVoaClientIfSfpMediaMismatch
The type of the inserted SFP is not the expected one.

A(ctivation): Invalid or mismatching SFP media is
detected.

D(e-activation): The correct SFP is used.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.25
oaVoaClientIfLossOfSignal
Loss of signal.

A(ctivation): Active loss of signal HW
indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.26
oaVoaClientIfSfpCodeMismatch
The inserted SFP does not have a legal
manufacturer code.

A(ctivation): A SFP with illegal code is inserted.

D(e-activation): The SFP with illegal code is removed.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.27
oaVoaClientIfAttenuationConfigMismatch
The wanted attenuation is not supported by the
inserted SFP.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.5.1.1.28

oaVoaLineIfTable

table
.1.3.6.1.4.1.8708.2.19.2.6.1 · 1 row entry · 12 columns
Open in standard view 
The interface list.
oaVoaLineIfEntry entry .1.3.6.1.4.1.8708.2.19.2.6.1.1
An entry in the interface list.
Indexes
oaVoaLineIfIndex
Column Syntax OID
oaVoaLineIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.1
oaVoaLineIfName
The management name of the interface, for
example 'VoaLine:1:2:1-2', where the first number
indicates sub-rack, the second slot number and
the third is the port number.
Examples:

oaVoaLine:s:s:p - line in…
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.2
oaVoaLineIfDescr
User configurable label.

This attribute can be written via SNMP.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.3
oaVoaLineIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.4
oaVoaLineIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.5
oaVoaLineIfTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.6
oaVoaLineIfRxPort
The number of the port where the RX-side of
the interface is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.7
oaVoaLineIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.8
oaVoaLineIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.9
oaVoaLineIfOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is not used.

up - The interface is active.
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.10
oaVoaLineIfModuleFailure
The module HW has detected a failure.

A: The module has failed

D: The module is OK again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.11
oaVoaLineIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.6.1.1.12

oaModuleTable

table
.1.3.6.1.4.1.8708.2.19.2.7.1 · 1 row entry · 20 columns
Open in standard view 
The module list.
oaModuleEntry entry .1.3.6.1.4.1.8708.2.19.2.7.1.1
An entry in the module list.
Indexes
oaModuleIndex
Column Syntax OID
oaModuleIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.1
oaModuleName
The management name of the interface,
for example 'module:1:2:1'.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.2
oaModuleDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.3
oaModuleSubrack
The number of the subrack where the module
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.4
oaModuleSlot
The number of the slot where the module is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.5
oaModuleNumber
The number of the module on the board.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.6
oaModuleInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.7
oaModuleAdminStatus
The administrative state for the module.

up - Alarms are not suppressed.

service - Alarms from the module are suppressed.
The module is still activated.

down - Currently not …
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.8
oaModuleOperStatus
The operational state for the module.

notPresent - The module is not available.

down - The module is not used.

up - The module is active.
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.9
oaModuleObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.10
oaModuleNominalTemp
The set temperature in units of 0.1 degrees centigrade.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.11
oaModuleRelativeTemp
The relative temperature in units of 0.1 degrees centigrade.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.12
oaModuleTempFailure
The module temperature is above/below expected one.

A: The temperature is not correct.

D: The temperature becomes correct.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.13
oaModuleTemperature
The temperature of the module in 0.1 degrees
centigrade
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.14
oaModuleCommunicationFailure
The communication with the module failed.

A(ctivation): Failed to talk to the module

D(e-activation): Could talk to the module again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.15
oaModuleModuleInfo
Information (for example firmware and serial number) about the module.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.16
oaModuleVcomThresholdExceeded deprecated
The common voltage supply in the ROADM module has exceeded
recommended threshold. Firmware upgrade is recommended to resolve this alarm.

A(ctivation): The VCOM threshold is exceeded

D(e-act…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.17
oaModuleFirmwareUpgradeAvailable
An upgrade is available for the ROADM module. See release
notes for details on how to obtain and install the upgrade
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.18
oaModuleWarmingUp
ROADM module is warming up, the optics has not reached a stable
temperature, all channels are blocked.

A(ctivation): cold start of ROADM board

D(e-activation): the warning is cleared as soo…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.19
oaModuleFailure
The module HW has detected a failure.

A(ctivation): The module has failed

D(e-activation): The module is OK again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.19.2.7.1.1.20