oaVoaClientIfName

LUM-OA-MIB · .1.3.6.1.4.1.8708.2.19.2.5.1.1.2
MIB view Table view

Object

column LUM-TCMgmtNameString 
The management name of the interface,
for example 'voaClient:1:2:1' which
indicates subrack 1, board 2 and port 1.

Context

MIB
LUM-OA-MIB
OID
.1.3.6.1.4.1.8708.2.19.2.5.1.1.2
Type
column
Access
readonly
Status
current
Parent
oaVoaClientIfEntry
Table
oaVoaClientIfTable
Siblings
27

Syntax

LUM-TCMgmtNameString
Source
LUM-TCMgmtNameString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oaVoaClientIfIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.1
oaVoaClientIfOperStatus
The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The inter…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.10
oaVoaClientIfObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.19.2.5.1.1.11
oaVoaClientIfControlMode
The control mode of the VOA channel. constAttenuation - set a fix attenuation
columnEnumeration.1.3.6.1.4.1.8708.2.19.2.5.1.1.12
oaVoaClientIfWantedAttenuation
The wanted attenuation. Applicable for constAttenuation This attribute can be written via SNMP if not set to 2147483647.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.13
oaVoaClientIfCurrentAttenuation
The current attenuation. Applicable in case of MDU40 boards.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.14
oaVoaClientIfLambda
The frequency given in hundreds of GHz (0.01 GHz). Set to 0 for transparent ports.
columnLUM-TCLambdaFrequency.1.3.6.1.4.1.8708.2.19.2.5.1.1.15
oaVoaClientIfAbsoluteAttenuation
The wanted absolute attenuation including the insertion loss. This value can never be set below the upper limit of the insertion loss. VOA8CHSFP: The range is depen…
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.16
oaVoaClientIfVoa2CurrentAttenuation
This value shows the current set absolute attenua- tion on VOA8ch-II and voa8chsfp. This value is usually the same value as the absolute attenuation except when a decrase or incr…
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.17
oaVoaClientIfDecreaseAttenuation
The wanted decrease of the current attenuation. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.18
oaVoaClientIfIncreaseAttenuation
The wanted increase of the current attenuation. This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.19
oaVoaClientIfInsertionLoss
The insertion loss for the port. The attenuation can never be set to a value below this value.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.20
oaVoaClientIfExpectedFrequency
The frequency given in hundreds of GHz (0.01 GHz). This value is only used for presentation purposes in name of port.
columnLUM-TCLambdaFrequency.1.3.6.1.4.1.8708.2.19.2.5.1.1.21
oaVoaClientIfSfpMissing
An expected VOA SFP is missing. A(ctivation): An expected SFP is missing. D(e-activation): The missing SFP is inserted.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.22
oaVoaClientIfSfpClass
String that contains general information about the SFP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.19.2.5.1.1.23
oaVoaClientIfSfpTransmitterFailed
The SFP has detected a failure in the transmitter part. A(ctivation): The transmitter has failed D(e-activation): The transmitter is OK again
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.24
oaVoaClientIfSfpMediaMismatch
The type of the inserted SFP is not the expected one. A(ctivation): Invalid or mismatching SFP media is detected. D(e-activation): The correct SFP…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.25
oaVoaClientIfLossOfSignal
Loss of signal. A(ctivation): Active loss of signal HW indication. D(e-activation): Inactive loss of signal HW indication.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.26
oaVoaClientIfSfpCodeMismatch
The inserted SFP does not have a legal manufacturer code. A(ctivation): A SFP with illegal code is inserted. D(e-activation): The SFP with illegal co…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.27
oaVoaClientIfAttenuationConfigMismatch
The wanted attenuation is not supported by the inserted SFP.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.28
oaVoaClientIfDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.19.2.5.1.1.3
oaVoaClientIfSubrack
The number of the subrack where the interface is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.19.2.5.1.1.4
oaVoaClientIfSlot
The number of the slot where the interface is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.19.2.5.1.1.5
oaVoaClientIfTxPort
The number of the port where the Tx part of the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.19.2.5.1.1.6
oaVoaClientIfRxPort
The number of the port where the Rx part of the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.19.2.5.1.1.7
oaVoaClientIfInvPhysIndexOrZero
The row in the invPhysTable for this interface. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.5.1.1.8
oaVoaClientIfAdminStatus
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.19.2.5.1.1.9