oaVoaClientIfDecreaseAttenuation
LUM-OA-MIB ·
.1.3.6.1.4.1.8708.2.19.2.5.1.1.18
Object
column
r/w
Unsigned32
The wanted decrease of the current attenuation.
This attribute can be written via SNMP.
Context
- MIB
- LUM-OA-MIB
- OID
.1.3.6.1.4.1.8708.2.19.2.5.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- oaVoaClientIfEntry
- Table
- oaVoaClientIfTable
- Siblings
- 27
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-300
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oaVoaClientIfIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.1 |
| oaVoaClientIfOperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is not used.
up - The inter… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.10 |
| oaVoaClientIfObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.19.2.5.1.1.11 |
| oaVoaClientIfControlMode The control mode of the VOA channel.
constAttenuation - set a fix attenuation | column | Enumeration | .1.3.6.1.4.1.8708.2.19.2.5.1.1.12 |
| oaVoaClientIfWantedAttenuation The wanted attenuation.
Applicable for constAttenuation
This attribute can be written via SNMP if not set to 2147483647. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.13 |
| oaVoaClientIfCurrentAttenuation The current attenuation.
Applicable in case of MDU40 boards. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.14 |
| oaVoaClientIfLambda The frequency given in hundreds of GHz
(0.01 GHz). Set to 0 for transparent ports. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.19.2.5.1.1.15 |
| oaVoaClientIfAbsoluteAttenuation The wanted absolute attenuation including
the insertion loss. This value can never be
set below the upper limit of the insertion loss.
VOA8CHSFP: The range is depen… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.16 |
| oaVoaClientIfVoa2CurrentAttenuation This value shows the current set absolute attenua-
tion on VOA8ch-II and voa8chsfp. This value is
usually the same value as the absolute attenuation
except when a decrase or incr… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.17 |
| oaVoaClientIfIncreaseAttenuation The wanted increase of the current attenuation.
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.19 |
| oaVoaClientIfName The management name of the interface,
for example 'voaClient:1:2:1' which
indicates subrack 1, board 2 and port 1. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.19.2.5.1.1.2 |
| oaVoaClientIfInsertionLoss The insertion loss for the port. The attenuation
can never be set to a value below this value. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.20 |
| oaVoaClientIfExpectedFrequency The frequency given in hundreds of GHz
(0.01 GHz). This value is only used for
presentation purposes in name of port. | column | LUM-TCLambdaFrequency | .1.3.6.1.4.1.8708.2.19.2.5.1.1.21 |
| oaVoaClientIfSfpMissing An expected VOA SFP is missing.
A(ctivation): An expected SFP is missing.
D(e-activation): The missing SFP is inserted. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.22 |
| oaVoaClientIfSfpClass String that contains general information about
the SFP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.19.2.5.1.1.23 |
| oaVoaClientIfSfpTransmitterFailed The SFP has detected a failure
in the transmitter part.
A(ctivation): The transmitter has failed
D(e-activation): The transmitter is OK again | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.24 |
| oaVoaClientIfSfpMediaMismatch The type of the inserted SFP is not the expected one.
A(ctivation): Invalid or mismatching SFP media is
detected.
D(e-activation): The correct SFP… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.25 |
| oaVoaClientIfLossOfSignal Loss of signal.
A(ctivation): Active loss of signal HW
indication.
D(e-activation): Inactive loss of signal HW
indication. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.26 |
| oaVoaClientIfSfpCodeMismatch The inserted SFP does not have a legal
manufacturer code.
A(ctivation): A SFP with illegal code is inserted.
D(e-activation): The SFP with illegal co… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.27 |
| oaVoaClientIfAttenuationConfigMismatch The wanted attenuation is not supported by the
inserted SFP. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.28 |
| oaVoaClientIfDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.19.2.5.1.1.3 |
| oaVoaClientIfSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.19.2.5.1.1.4 |
| oaVoaClientIfSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.19.2.5.1.1.5 |
| oaVoaClientIfTxPort The number of the port where the Tx part of
the interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.19.2.5.1.1.6 |
| oaVoaClientIfRxPort The number of the port where the Rx part of
the interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.19.2.5.1.1.7 |
| oaVoaClientIfInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.5.1.1.8 |
| oaVoaClientIfAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.19.2.5.1.1.9 |