oaVoaIfAdminStatus
LUM-OA-MIB ·
.1.3.6.1.4.1.8708.2.19.2.4.1.1.9
Object
The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-configuration. When service is concluded
adminStatus should be set to 'up' again.
Note that there is no difference between 'up'
and 'service', if no alarms can be rasied from
this object.
up - The interface should be activated when
it becomes available. Alarms are not suppressed.
This attribute can be written via SNMP.
Context
- MIB
- LUM-OA-MIB
- OID
.1.3.6.1.4.1.8708.2.19.2.4.1.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- oaVoaIfEntry
- Table
- oaVoaIfTable
- Siblings
- 21
Values & Constraints
Type Values
1 | down |
2 | service |
3 | up |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oaVoaIfIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.1 |
| oaVoaIfOperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is not used.
up - The inter… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.19.2.4.1.1.10 |
| oaVoaIfObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.19.2.4.1.1.11 |
| oaVoaIfControlMode The control mode of the VOA channel.
constPower - regulate slowly towards a given
output power.
constAttenuation - set a fix attenuation… | column | Enumeration | .1.3.6.1.4.1.8708.2.19.2.4.1.1.12 |
| oaVoaIfWantedOutputPower The wanted output power.
Applicable for constPower. | column | Integer32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.13 |
| oaVoaIfCurrentOutputPower The actual output power. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.14 |
| oaVoaIfRegulationRange An offset below the wanted output power
at which the 'Current Power Out Of Range'
alarm shall be raised.
When the current output power is so
far below the wanted ou… | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.15 |
| oaVoaIfWantedAttenuation The wanted attenuation.
voa8ch: applicable for constAttenuation
voa2ch: always applicable
This attribute can be written via SNMP. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.16 |
| oaVoaIfCurrentAttenuation The current attenuation.
Applicable for constPower. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.17 |
| oaVoaIfSamplePeriod The approximate period between 2
consecutive measurements of the output
power | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.18 |
| oaVoaIfOuputPowerControlFailure Alarm raised when the wanted output power
can not be obtained. That is, even if the
attenuation is reduced to zero, the wanted
power can not be obtained. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.4.1.1.19 |
| oaVoaIfName The management name of the interface,
for example 'voa:1:2:1'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.19.2.4.1.1.2 |
| oaVoaIfCurrentPowerOutOfRange Alarm raised when the current output power
is outside the 'regulation range'.
The regulation range is defined by
Wanted Output Power +/- Regulation R… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.4.1.1.20 |
| oaVoaIfConfigurationCommand Select which control mode to use:
constPower
constAttenuation | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.19.2.4.1.1.21 |
| oaVoaIfInInstallationMode Alarm raised when the VOA is put in the
mode constPowerAtInstallation. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.4.1.1.22 |
| oaVoaIfDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.19.2.4.1.1.3 |
| oaVoaIfSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.19.2.4.1.1.4 |
| oaVoaIfSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.19.2.4.1.1.5 |
| oaVoaIfTxPort The number of the port where the TX part of
the interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.19.2.4.1.1.6 |
| oaVoaIfRxPort The number of the port where the RX part of
the interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.19.2.4.1.1.7 |
| oaVoaIfInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.4.1.1.8 |