oaVoaIfCurrentAttenuation

LUM-OA-MIB · .1.3.6.1.4.1.8708.2.19.2.4.1.1.17
MIB view Table view

Object

column SNMPv2-SMIUnsigned32 
The current attenuation.
              
Applicable for constPower.

Context

MIB
LUM-OA-MIB
OID
.1.3.6.1.4.1.8708.2.19.2.4.1.1.17
Type
column
Access
readonly
Status
current
Parent
oaVoaIfEntry
Table
oaVoaIfTable
Siblings
21

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
oaVoaIfIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.4.1.1.1
oaVoaIfOperStatus
The operational state for the interface. notPresent - The interface is not available. down - The interface is not used. up - The inter…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.19.2.4.1.1.10
oaVoaIfObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.19.2.4.1.1.11
oaVoaIfControlMode
The control mode of the VOA channel. constPower - regulate slowly towards a given output power. constAttenuation - set a fix attenuation…
columnEnumeration.1.3.6.1.4.1.8708.2.19.2.4.1.1.12
oaVoaIfWantedOutputPower
The wanted output power. Applicable for constPower.
columnInteger32.1.3.6.1.4.1.8708.2.19.2.4.1.1.13
oaVoaIfCurrentOutputPower
The actual output power.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.19.2.4.1.1.14
oaVoaIfRegulationRange
An offset below the wanted output power at which the 'Current Power Out Of Range' alarm shall be raised. When the current output power is so far below the wanted ou…
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.4.1.1.15
oaVoaIfWantedAttenuation
The wanted attenuation. voa8ch: applicable for constAttenuation voa2ch: always applicable This attribute can be written via SNMP.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.4.1.1.16
oaVoaIfSamplePeriod
The approximate period between 2 consecutive measurements of the output power
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.19.2.4.1.1.18
oaVoaIfOuputPowerControlFailure
Alarm raised when the wanted output power can not be obtained. That is, even if the attenuation is reduced to zero, the wanted power can not be obtained.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.4.1.1.19
oaVoaIfName
The management name of the interface, for example 'voa:1:2:1'.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.19.2.4.1.1.2
oaVoaIfCurrentPowerOutOfRange
Alarm raised when the current output power is outside the 'regulation range'. The regulation range is defined by Wanted Output Power +/- Regulation R…
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.4.1.1.20
oaVoaIfConfigurationCommand
Select which control mode to use: constPower constAttenuation
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.19.2.4.1.1.21
oaVoaIfInInstallationMode
Alarm raised when the VOA is put in the mode constPowerAtInstallation.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.19.2.4.1.1.22
oaVoaIfDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.19.2.4.1.1.3
oaVoaIfSubrack
The number of the subrack where the interface is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.19.2.4.1.1.4
oaVoaIfSlot
The number of the slot where the interface is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.19.2.4.1.1.5
oaVoaIfTxPort
The number of the port where the TX part of the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.19.2.4.1.1.6
oaVoaIfRxPort
The number of the port where the RX part of the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.19.2.4.1.1.7
oaVoaIfInvPhysIndexOrZero
The row in the invPhysTable for this interface. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.19.2.4.1.1.8
oaVoaIfAdminStatus
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.19.2.4.1.1.9