oaModuleVcomThresholdExceeded
LUM-OA-MIB ·
.1.3.6.1.4.1.8708.2.19.2.7.1.1.17
Object
The common voltage supply in the ROADM module has exceeded
recommended threshold. Firmware upgrade is recommended to resolve this alarm.
A(ctivation): The VCOM threshold is exceeded
D(e-activation): The VCOM threshold is OK again
Context
- MIB
- LUM-OA-MIB
- OID
.1.3.6.1.4.1.8708.2.19.2.7.1.1.17- Type
- column
- Access
- readonly
- Status
- deprecated
- Parent
- oaModuleEntry
- Table
- oaModuleTable
- Siblings
- 19
Values & Constraints
Type Values
1 | ok |
2 | alarm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| oaModuleIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.7.1.1.1 |
| oaModuleObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.19.2.7.1.1.10 |
| oaModuleNominalTemp The set temperature in units of 0.1 degrees centigrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.19.2.7.1.1.11 |
| oaModuleRelativeTemp The relative temperature in units of 0.1 degrees centigrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.19.2.7.1.1.12 |
| oaModuleTempFailure The module temperature is above/below expected one.
A: The temperature is not correct.
D: The temperature becomes correct. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.13 |
| oaModuleTemperature The temperature of the module in 0.1 degrees
centigrade | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.19.2.7.1.1.14 |
| oaModuleCommunicationFailure The communication with the module failed.
A(ctivation): Failed to talk to the module
D(e-activation): Could talk to the module again | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.15 |
| oaModuleModuleInfo Information (for example firmware and serial number) about the module. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.19.2.7.1.1.16 |
| oaModuleFirmwareUpgradeAvailable An upgrade is available for the ROADM module. See release
notes for details on how to obtain and install the upgrade | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.18 |
| oaModuleWarmingUp ROADM module is warming up, the optics has not reached a stable
temperature, all channels are blocked.
A(ctivation): cold start of ROADM board
D(e-ac… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.19 |
| oaModuleName The management name of the interface,
for example 'module:1:2:1'. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.19.2.7.1.1.2 |
| oaModuleFailure The module HW has detected a failure.
A(ctivation): The module has failed
D(e-activation): The module is OK again | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.20 |
| oaModuleDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.19.2.7.1.1.3 |
| oaModuleSubrack The number of the subrack where the module
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.19.2.7.1.1.4 |
| oaModuleSlot The number of the slot where the module is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.19.2.7.1.1.5 |
| oaModuleNumber The number of the module on the board. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.19.2.7.1.1.6 |
| oaModuleInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.19.2.7.1.1.7 |
| oaModuleAdminStatus The administrative state for the module.
up - Alarms are not suppressed.
service - Alarms from the module are suppressed.
The module is still activat… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.8 |
| oaModuleOperStatus The operational state for the module.
notPresent - The module is not available.
down - The module is not used.
up - The module is acti… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.19.2.7.1.1.9 |