LUM-DCN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
102

dcnIfTable

table
.1.3.6.1.4.1.8708.2.20.2.2.1 · 1 row entry · 49 columns
Open in standard view 
The interface list.
dcnIfEntry entry .1.3.6.1.4.1.8708.2.20.2.2.1.1
An entry in the interface list.
Indexes
dcnIfIndex
Column Syntax OID
dcnIfIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.1
dcnIfName
The management name of the interface, for example
'osc:1:1:1-2', where the first number indicates
sub-rack, the second slot number and the third is
the port number.
Examples:

osc:s:s:p - DCN client interf…
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.2
dcnIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.3
dcnIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.4
dcnIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.5
dcnIfTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.6
dcnIfRxPort
The number of the port where the RX-side of the
interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.7
dcnIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.8
dcnIfType
The expected signal type.
DcnSignalType
Textual Convention: DcnSignalType Enumeration
Type Values:
0undefined
1electrical
2optical
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.9
dcnIfMaxSpeed
The expected signal bit rate in units of
1,000,000 bits (Mb) per second.
Unsigned32
Constraints:
range: 10-100
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.10
dcnIfOscMode
The usage mode for the OSC channel

icn - Used for node internal communication

dcn - Used for external communication
(main CU only)

customer - Used for customer communication
…
DcnOscModer/w
Textual Convention: DcnOscMode Enumeration
Type Values:
0icn
1dcn
2customer
3mixed
4unused
5lan
6customerOpto
7mixedOpto
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.11
dcnIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.12
dcnIfOperStatus
The operational state for the interface.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the
'up'-s…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.13
dcnIfTxSignalStatus
The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…
Enumeration
Enumerated Values:
1down
2degraded
3up
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.14
dcnIfLinkDown
A: Failure to negotiate a connection with the
other party.

D: A connection is negotiated.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.15
dcnIfTxFrequency
The transmitted frequency given.
LUM-TCLambdaFrequency
Textual Convention: LUM-TCLambdaFrequency Enumeration
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.16
dcnIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.17
dcnIfLaserStatus
The operational state of the TX-side laser.

off - The laser is turned off.

on - The laser is turned on.
Enumeration
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.18
dcnIfPowerLevel
The received power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.19
dcnIfTxPowerLevel
The transmitted power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.20
dcnIfReceiverSensitivity
The lowest power that the receiver is guaranteed
to handle, in units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.21
dcnIfPowerLevelLowRelativeThreshold
The lower threshold for received power level in
units of 0.1 dB, relative to the receiver
sensitivity.
Integer32r/w
Constraints:
range: -50-100
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.22
dcnIfLaserTempActual
The actual laser temperature in units of
0.1 degrees centigrade.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.23
dcnIfTrxClass
String that describes the transceiver class.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.24
dcnIfHighSpeedMin
The minmum speed in units of 1,000,000 bits (Mb)
per second. If this object reports a value of 'n'
then the speed of the interface is somewhere in
the range of 'n-500,000' to 'n+499,999'.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.25
dcnIfHighSpeedMax
The maximum speed in units of 1,000,000 bits per
second. If this object reports a value of 'n'
then the speed of the interface is somewhere in
the range of 'n-500,000' to 'n+499,999'.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.26
dcnIfExpectedTxFrequency
The expected frequency given in hundreds of GHz
(0.01 GHz).
LUM-TCLambdaFrequencyr/w
Textual Convention: LUM-TCLambdaFrequency Enumeration
Type Values:
0undefined
1iWdmPonFrequency
2otclg
130b1300
150b1500
850w850
1270w1270
1290w1290
1310w1310
1330w1330
1350w1350
1370w1370
1390w1390
1410w1410
1430w1430
1450w1450
1470w1470
1490w1490
1510w1510
1530w1530
1550w1550
1570w1570
1590w1590
1610w1610
18710ch871
18730ch873
18750ch875
18770ch877
18790ch879
18810ch881
18830ch883
18850ch885
18870ch887
18890ch889
18910ch891
18930ch893
18950ch895
18970ch897
18990ch899
19010ch901
19030ch903
19050ch905
19070ch907
19090ch909
19135ch9135
19140ch914
19145ch9145
19150ch915
19155ch9155
19160ch916
19165ch9165
19170ch917
19175ch9175
19180ch918
19185ch9185
19190ch919
19195ch9195
19200ch920
19205ch9205
19210ch921
19215ch9215
19220ch922
19225ch9225
19230ch923
19235ch9235
19240ch924
19245ch9245
19250ch925
19255ch9255
19260ch926
19265ch9265
19270ch927
19275ch9275
19280ch928
19285ch9285
19290ch929
19295ch9295
19300ch930
19305ch9305
19310ch931
19315ch9315
19320ch932
19325ch9325
19330ch933
19335ch9335
19340ch934
19345ch9345
19350ch935
19355ch9355
19360ch936
19365ch9365
19370ch937
19375ch9375
19380ch938
19385ch9385
19390ch939
19395ch9395
19400ch940
19405ch9405
19410ch941
19415ch9415
19420ch942
19425ch9425
19430ch943
19435ch9435
19440ch944
19445ch9445
19450ch945
19455ch9455
19460ch946
19465ch9465
19470ch947
19475ch9475
19480ch948
19485ch9485
19490ch949
19495ch9495
19500ch950
19505ch9505
19510ch951
19515ch9515
19520ch952
19525ch9525
19530ch953
19535ch9535
19540ch954
19545ch9545
19550ch955
19555ch9555
19560ch956
19565ch9565
19570ch957
19575ch9575
19580ch958
19585ch9585
19590ch959
19595ch9595
19600ch960
19605ch9605
19610ch961
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.27
dcnIfLaserBias
Measures laser bias current value in tenths of
mA (0.1 mA).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.28
dcnIfLossOfSignal
Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.29
dcnIfTrxCodeMismatch
The inserted transceiver does not have a legal
manufacturer code.

A: A transceiver with illegal code is inserted.

D: The transceiver with illegal code is removed.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.30
dcnIfTrxBitrateUnavailable
The inserted transceiver does not support the requested
bit rate.

A: A transceiver with other supported bit rate than
the requested bit rate is inserted.

D: The transceiver with the non-…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.31
dcnIfTrxMissing
An expected transceiver is missing.

A: An expected transceiver is missing.

D: The missing transceiver is inserted.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.32
dcnIfTransmitterFailed
The transceiver HW has detected a failure
in the transmitter part.

A: The transmitter has failed

D: The transmitter is OK again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.33
dcnIfIllegalFrequency
The frequency supported by the transceiver is not
recognized by the system.

A: Invalid or unknown frequency information is
detected in the (pluggable) transceiver or
board production data.
…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.34
dcnIfUnexpectedTxFrequency
The actual frequency does not match the
pre-configured frequency.

A pre-configured frequency of '0' matches
all actual frequencies.

A: The configured frequency does not match the
actual fre…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.35
dcnIfReceivedPowerHigh
Received power level is too high.
Applicable for all signal formats.

A: The received power level exceeds the
the built-in overload threshold.

D: The received power level is 0.5 dB below the…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.36
dcnIfReceivedPowerLow
Received power level low threshold exceeded.
Applicable for all signal formats.

A: The received power level is below the
associated threshold.

D: The received power level is 0.5 dB above
th…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.37
dcnIfTrxMediaMismatch
The TRX media does not match the expected one.

A: Invalid or mismatching trx media is
detected.

D: The (pluggable) transceiver or board is
replaced, or the configuration is changed.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.38
dcnIfProtocolVersionMismatch
The peer interfaces uses different versions of the communication
protocol.

A: Incoming messages have the wrong version

D: Incoming messages have the expected version
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.39
dcnIfRemoteDefectIndication
The remote interfaces signals failures on the received
signal.

A: The remote interface signals failure

D: The remote interface does not signal failure
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.40
dcnIfTraceTransmitted
The trace identifier to be transmitted from this
interface.

Set to empty string for default value:

<IP address>:<subrack>:<slot>:<port>

Note that only the last part of the…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.41
dcnIfTraceReceived
The received trace identifier for this interface.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.42
dcnIfTraceExpected
Trace identifier used for matching against
the received trace identifier.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.43
dcnIfTraceAlarmMode
Controls if the trace identifier mismatch alarm
should be raised.

disabled - The alarm is disabled.

enabled - The alarm is raised if expected trace
identifier differs from the received trac…
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.44
dcnIfTraceMismatch
Indicates if the expected trace identifier
differs from the received trace identifier.

A: The received trace identifier differs from
the expected trace identifier.

D: The identifiers match.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.55
dcnIfLaserMode
The administrative state of the TX-side laser

on - The laser is turned on.

als - Automatic Laser Shutdown/Turn-Off
when lossOfSignal is detected on the RX side of
the interface.
Enumerationr/w
Enumerated Values:
1on
2als
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.56
dcnIfLinkSupervisionFailure
The supervision procedure of the protection link
failed.

A: The protection board loses contact with its peer

D: The contact is re-established
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.57
dcnIfAid
The access identifier (AID) of the interface.
The format is according to GR-833.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.58
dcnIfPhysicalLocation
The physical location of the if.
The format is according to GR-833.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.2.1.1.59

dcnPppTable

table
.1.3.6.1.4.1.8708.2.20.2.4.1 · 1 row entry · 23 columns
Open in standard view 
The PPP list.
dcnPppEntry entry .1.3.6.1.4.1.8708.2.20.2.4.1.1
An entry in the PPP list.
Indexes
dcnPppIndex
Column Syntax OID
dcnPppIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.1
dcnPppName
The management name of the PPP link, for example
'ppp:1:2:3-4', meaning ports 3 and 4 on the board in
subrack 1, slot 2.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.2
dcnPppDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.3
dcnPppTxSubrack
The number of the subrack where the TX side of
the PPP link is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.4
dcnPppTxSlot
The number of the slot where the TX side of the
PPP link is located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.5
dcnPppTxPort
The number of the port where the TX side of the
PPP link is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.6
dcnPppRxSubrack
The number of the subrack where the RX side of
the PPP link is located.
LUM-TCSubrackNumberr/w
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.7
dcnPppRxSlot
The number of the slot where the RX side of the
PPP link is located.
LUM-TCSlotNumberr/w
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.8
dcnPppRxPort
The number of the port where the RX-side of the
PPP link is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.9
dcnPppInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.10
dcnPppType
The expected signal type.
Enumeration
Enumerated Values:
1proprietary
2osc
3sdh
4g709
5sonet
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.11
dcnPppAdminStatus
The administrative state for the PPP link.

down - The PPP link should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-conf…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.12
dcnPppOperStatus
The operational state for the PPP link.

notPresent - The physical resources are not
available.

down - The interface is de-activated or the are
faults preventing it from going to the 'up'-st…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.13
dcnPppRouteName
The Linux name of the PPP link, for example
'p1-1-1-1-2', where the first number indicates
subrack, the second and third is slot and port
number for the TX side. The fourth and fifth is
slot and port for the RX side.
…
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.14
dcnPppDialCommand
Command to dial up the remote node to enable PPP link
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.15
dcnPppAcceptCommand
Accept a PPP object that has been created by a dial up
command from the remote node.

Accepting the object will make it persistent, otherwise
it will not be saved in the backup.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.16
dcnPppLogicalLinkId
This attribute is settable only on ppp links
terminated on a specific type of boards.
Namely, traffic units that may terminate more
than one ppp-link.

The tricky part is that the ppp-link
object in the n…
Integer32r/w
Constraints:
range: -1-11
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.17
dcnPppObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.18
dcnPppGccChannel
The chosen Gcc channel used for PPP link.
Valid values for the user to set is 0, 1 or 2.
Integer32r/w
Constraints:
range: -1-2
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.19
dcnPppVlanId
VLAN ID when the PPP-link is carried on a VLAN.
0 if link is not carried by a VLAN.
Integer32r/w
Constraints:
range: -1-4095
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.20
dcnPppVlanEtherType
Specifies the ether type of the VLAN.

qTag0x8100 - 802.1Q
sTag0x88a8 - 802.1ad Service tag
Enumerationr/w
Enumerated Values:
1qTag0x8100
2sTag0x88a8
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.21
dcnPppTxIfNo
The number of the interface where the TX side of the
PPP link is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.22
dcnPppRxIfNo
The number of the interface where the RX side of the
PPP link is located.
LUM-TCPortNumberr/w
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.4.1.1.23

dcnEthTable

table
.1.3.6.1.4.1.8708.2.20.2.6.1 · 1 row entry · 16 columns
Open in standard view 
The ETH table spcifies information for configurating
the dcn ports.
dcnEthEntry entry .1.3.6.1.4.1.8708.2.20.2.6.1.1
An entry in the ETH list.
Each entry represents a physical dcn port.
Indexes
dcnEthIndex
Column Syntax OID
dcnEthIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.1
dcnEthName
The management name of the ETH link, for example
'eth:2:1:3', meaning dcn port 3 on the board in
subrack 2, slot 1.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.2
dcnEthDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.3
dcnEthSubrack
The number of the subrack where the
ETH link is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.4
dcnEthSlot
The number of the slot where the
ETH link is located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.5
dcnEthPort
The number of the port where the
ETH link is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.6
dcnEthAutoNegotiationMode
The wanted auto negotiation mode.

off - auto negotiation process is disabled
not possible to set off when speed or duplex
is set to both

on - auto negotiation process is enabled
Enumerationr/w
Enumerated Values:
1off
2on
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.7
dcnEthLinkStatus
The status of the link
Enumeration
Enumerated Values:
0up
1down
2unknown
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.8
dcnEthSpeed
The expected speed of the dcn port.

mbps10 - 10 Mbps
mbps100 - 100 Mbps
mbps1000 - 1000 Mbps
auto - Autodetect what speed to use
not possible to set auto when autonegotiation mode
is set to off
Enumerationr/w
Enumerated Values:
0mbps10
1mbps100
2auto
3mbps1000
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.9
dcnEthDuplexCapability
The expected duplex capability.

half - supports half duplex

full - supports full duplex

both - supports both half and full duplex
not possible to set both when autonegotiat…
Enumerationr/w
Enumerated Values:
1half
2full
3both
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.10
dcnEthRateLimit
Rate limit in steps of 0.08 Mb/s if 10 Mb/s link
speed, 0.8 Mb/s if 100 Mb/s link speed and 8 Mb/s
if 1000 Mb/s link speed.
Frames above the limit are dropped.
Bucket size is 130 kB.

Zero (0) is a special…
Integer32r/w
Constraints:
range: 0-125
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.11
dcnEthFlowControlMode
The mode for handling of pause messages between
the peers.

noPause - PAUSE frame reception and
transmission is disabled

rxPause - PAUSE frame reception is enabled
(asymmetric)
…
Enumerationr/w
Enumerated Values:
1noPause
2rxPause
3txPause
4bothPause
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.12
dcnEthObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.13
dcnEthChangeSpeedCommand
Command to change speed, autonegotiation mode
and duplex capability.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.15
dcnEthAdminStatus
The administrative state for the ethernet port.

down - The interface should be inactive.

up - The interface should be activated when
it becomes available. Alarms are not suppressed.
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.16
dcnEthOperStatus
The operational state for the ethernet interface.

down - The interface is de-activated or the are
faults preventing it from going to the
'up'-state.

up - The interface is operational.
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.20.2.6.1.1.17

dcnCcTable

table
.1.3.6.1.4.1.8708.2.20.2.7.1 · 1 row entry · 14 columns
Open in standard view 
The cc list.
dcnCcEntry entry .1.3.6.1.4.1.8708.2.20.2.7.1.1
An entry in the interface list.
Indexes
dcnCcIndex
Column Syntax OID
dcnCcIndex
An arbitrary index assigned to each entry.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.1
dcnCcName
The management name of the communication channel interface, for example
'line:1:1:1-2', where the first number indicates subrack,
the second slot number and the third is the port number.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.2
dcnCcDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.3
dcnCcSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.4
dcnCcSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.5
dcnCcTxPort
The number of the port where the TX-side of the
interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.6
dcnCcRxPort
The number of the port where the RX-side of the
interface is located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.7
dcnCcAdminStatus
The administrative state for the communication channel link.

down - The communication channel link should be inactive.

service - The link is activated but alarms
are suppressed. Intended fo…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.8
dcnCcChannelStatus
Status of the communication channel.

NotPresent - The HW (board) is not in place to execute the function.

Down - Admin is Down and a incoming communication channel is not detected
…
Enumeration
Enumerated Values:
1notPresent
2down
3calling
4up
5waitToHangup
6broken
7restarting
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.9
dcnCcErrorCounter
The counter associated FEC errors of the management channel.
The errors are accumulated since last reset.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.10
dcnCcResetCounter
Reset the error counter to 0.
Enumerationr/w
Enumerated Values:
1normal
2reset
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.11
dcnCcFecFailure
FEC failure
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.12
dcnCcTrxNotSupportCommChannel
Trx does not support communication channel

The inserted transceiver does not support usage of communication channel.

Alarm - The transceiver does not support usage of communication channel.…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.13
dcnCcConfigurationMismatch
Communication channel configuration mismatch

Local communication channel is configured, but the remote side sends enabled=False.
This mismatch must be persistent for 60 seconds before the alarm is generat…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.20.2.7.1.1.14