dcnPppInvPhysIndexOrZero

LUM-DCN-MIB · .1.3.6.1.4.1.8708.2.20.2.4.1.1.10
MIB view Table view

Object

column Unsigned32 
The row in the invPhysTable for this interface.
Set to 0 if not known.

Context

MIB
LUM-DCN-MIB
OID
.1.3.6.1.4.1.8708.2.20.2.4.1.1.10
Type
column
Access
readonly
Status
current
Parent
dcnPppEntry
Table
dcnPppTable
Siblings
22

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dcnPppIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.20.2.4.1.1.1
dcnPppType
The expected signal type.
columnEnumeration.1.3.6.1.4.1.8708.2.20.2.4.1.1.11
dcnPppAdminStatus
The administrative state for the PPP link. down - The PPP link should be inactive. service - The interface is activated but alarms are suppressed. In…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.20.2.4.1.1.12
dcnPppOperStatus
The operational state for the PPP link. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.20.2.4.1.1.13
dcnPppRouteName
The Linux name of the PPP link, for example 'p1-1-1-1-2', where the first number indicates subrack, the second and third is slot and port number for the TX side. The fourth and fi…
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.20.2.4.1.1.14
dcnPppDialCommand
Command to dial up the remote node to enable PPP link
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.20.2.4.1.1.15
dcnPppAcceptCommand
Accept a PPP object that has been created by a dial up command from the remote node. Accepting the object will make it persistent, otherwise it will not be saved in…
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.20.2.4.1.1.16
dcnPppLogicalLinkId
This attribute is settable only on ppp links terminated on a specific type of boards. Namely, traffic units that may terminate more than one ppp-link. The tricky p…
columnInteger32.1.3.6.1.4.1.8708.2.20.2.4.1.1.17
dcnPppObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.20.2.4.1.1.18
dcnPppGccChannel
The chosen Gcc channel used for PPP link. Valid values for the user to set is 0, 1 or 2.
columnInteger32.1.3.6.1.4.1.8708.2.20.2.4.1.1.19
dcnPppName
The management name of the PPP link, for example 'ppp:1:2:3-4', meaning ports 3 and 4 on the board in subrack 1, slot 2.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.20.2.4.1.1.2
dcnPppVlanId
VLAN ID when the PPP-link is carried on a VLAN. 0 if link is not carried by a VLAN.
columnInteger32.1.3.6.1.4.1.8708.2.20.2.4.1.1.20
dcnPppVlanEtherType
Specifies the ether type of the VLAN. qTag0x8100 - 802.1Q sTag0x88a8 - 802.1ad Service tag
columnEnumeration.1.3.6.1.4.1.8708.2.20.2.4.1.1.21
dcnPppTxIfNo
The number of the interface where the TX side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.22
dcnPppRxIfNo
The number of the interface where the RX side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.23
dcnPppDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.20.2.4.1.1.3
dcnPppTxSubrack
The number of the subrack where the TX side of the PPP link is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.4
dcnPppTxSlot
The number of the slot where the TX side of the PPP link is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.5
dcnPppTxPort
The number of the port where the TX side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.6
dcnPppRxSubrack
The number of the subrack where the RX side of the PPP link is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.7
dcnPppRxSlot
The number of the slot where the RX side of the PPP link is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.8
dcnPppRxPort
The number of the port where the RX-side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.9