dcnEthName
LUM-DCN-MIB ·
.1.3.6.1.4.1.8708.2.20.2.6.1.1.2
Object
column
LUM-TCMgmtNameString
The management name of the ETH link, for example 'eth:2:1:3', meaning dcn port 3 on the board in subrack 2, slot 1.
Context
- MIB
- LUM-DCN-MIB
- OID
.1.3.6.1.4.1.8708.2.20.2.6.1.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dcnEthEntry
- Table
- dcnEthTable
- Siblings
- 15
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcnEthIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.20.2.6.1.1.1 |
| dcnEthDuplexCapability The expected duplex capability.
half - supports half duplex
full - supports full duplex
both - supports both half and full duplex
no… | column | Enumeration | .1.3.6.1.4.1.8708.2.20.2.6.1.1.10 |
| dcnEthRateLimit Rate limit in steps of 0.08 Mb/s if 10 Mb/s link
speed, 0.8 Mb/s if 100 Mb/s link speed and 8 Mb/s
if 1000 Mb/s link speed.
Frames above the limit are dropped.
Bucket size is 130 … | column | Integer32 | .1.3.6.1.4.1.8708.2.20.2.6.1.1.11 |
| dcnEthFlowControlMode The mode for handling of pause messages between
the peers.
noPause - PAUSE frame reception and
transmission is disabled
rxPause - PAUSE frame rece… | column | Enumeration | .1.3.6.1.4.1.8708.2.20.2.6.1.1.12 |
| dcnEthObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.20.2.6.1.1.13 |
| dcnEthChangeSpeedCommand Command to change speed, autonegotiation mode
and duplex capability. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.20.2.6.1.1.15 |
| dcnEthAdminStatus The administrative state for the ethernet port.
down - The interface should be inactive.
up - The interface should be activated when
it becomes avail… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.20.2.6.1.1.16 |
| dcnEthOperStatus The operational state for the ethernet interface.
down - The interface is de-activated or the are
faults preventing it from going to the
'up'-state.
… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.20.2.6.1.1.17 |
| dcnEthDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.20.2.6.1.1.3 |
| dcnEthSubrack The number of the subrack where the
ETH link is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.20.2.6.1.1.4 |
| dcnEthSlot The number of the slot where the
ETH link is located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.20.2.6.1.1.5 |
| dcnEthPort The number of the port where the
ETH link is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.20.2.6.1.1.6 |
| dcnEthAutoNegotiationMode The wanted auto negotiation mode.
off - auto negotiation process is disabled
not possible to set off when speed or duplex
is set to both
on - auto … | column | Enumeration | .1.3.6.1.4.1.8708.2.20.2.6.1.1.7 |
| dcnEthLinkStatus The status of the link | column | Enumeration | .1.3.6.1.4.1.8708.2.20.2.6.1.1.8 |
| dcnEthSpeed The expected speed of the dcn port.
mbps10 - 10 Mbps
mbps100 - 100 Mbps
mbps1000 - 1000 Mbps
auto - Autodetect what speed to use
not possible to set auto when au… | column | Enumeration | .1.3.6.1.4.1.8708.2.20.2.6.1.1.9 |