dcnPppDialCommand

LUM-DCN-MIB · .1.3.6.1.4.1.8708.2.20.2.4.1.1.15
MIB view Table view

Object

column LUM-TCCommandString 
Command to dial up the remote node to enable PPP link

Context

MIB
LUM-DCN-MIB
OID
.1.3.6.1.4.1.8708.2.20.2.4.1.1.15
Type
column
Access
readonly
Status
current
Parent
dcnPppEntry
Table
dcnPppTable
Siblings
22

Syntax

LUM-TCCommandString
Source
LUM-TCCommandString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dcnPppIndex
An arbitrary index assigned to each entry.
columnUnsigned32.1.3.6.1.4.1.8708.2.20.2.4.1.1.1
dcnPppInvPhysIndexOrZero
The row in the invPhysTable for this interface. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.20.2.4.1.1.10
dcnPppType
The expected signal type.
columnEnumeration.1.3.6.1.4.1.8708.2.20.2.4.1.1.11
dcnPppAdminStatus
The administrative state for the PPP link. down - The PPP link should be inactive. service - The interface is activated but alarms are suppressed. In…
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.20.2.4.1.1.12
dcnPppOperStatus
The operational state for the PPP link. notPresent - The physical resources are not available. down - The interface is de-activated or the are faults…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.20.2.4.1.1.13
dcnPppRouteName
The Linux name of the PPP link, for example 'p1-1-1-1-2', where the first number indicates subrack, the second and third is slot and port number for the TX side. The fourth and fi…
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.20.2.4.1.1.14
dcnPppAcceptCommand
Accept a PPP object that has been created by a dial up command from the remote node. Accepting the object will make it persistent, otherwise it will not be saved in…
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.20.2.4.1.1.16
dcnPppLogicalLinkId
This attribute is settable only on ppp links terminated on a specific type of boards. Namely, traffic units that may terminate more than one ppp-link. The tricky p…
columnInteger32.1.3.6.1.4.1.8708.2.20.2.4.1.1.17
dcnPppObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.20.2.4.1.1.18
dcnPppGccChannel
The chosen Gcc channel used for PPP link. Valid values for the user to set is 0, 1 or 2.
columnInteger32.1.3.6.1.4.1.8708.2.20.2.4.1.1.19
dcnPppName
The management name of the PPP link, for example 'ppp:1:2:3-4', meaning ports 3 and 4 on the board in subrack 1, slot 2.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.20.2.4.1.1.2
dcnPppVlanId
VLAN ID when the PPP-link is carried on a VLAN. 0 if link is not carried by a VLAN.
columnInteger32.1.3.6.1.4.1.8708.2.20.2.4.1.1.20
dcnPppVlanEtherType
Specifies the ether type of the VLAN. qTag0x8100 - 802.1Q sTag0x88a8 - 802.1ad Service tag
columnEnumeration.1.3.6.1.4.1.8708.2.20.2.4.1.1.21
dcnPppTxIfNo
The number of the interface where the TX side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.22
dcnPppRxIfNo
The number of the interface where the RX side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.23
dcnPppDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.20.2.4.1.1.3
dcnPppTxSubrack
The number of the subrack where the TX side of the PPP link is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.4
dcnPppTxSlot
The number of the slot where the TX side of the PPP link is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.5
dcnPppTxPort
The number of the port where the TX side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.6
dcnPppRxSubrack
The number of the subrack where the RX side of the PPP link is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.7
dcnPppRxSlot
The number of the slot where the RX side of the PPP link is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.8
dcnPppRxPort
The number of the port where the RX-side of the PPP link is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.20.2.4.1.1.9