dcnCcChannelStatus
LUM-DCN-MIB ·
.1.3.6.1.4.1.8708.2.20.2.7.1.1.9
Object
column
Enumeration
Status of the communication channel.
NotPresent - The HW (board) is not in place to execute the function.
Down - Admin is Down and a incoming communication channel is not detected
Calling - The communication channel is transmitted, but no incoming communication channel is detected
Up - The communication channel is sent and received
WaitToHangUp - The communication channel is sent and received. It is maintained on request of the peer.
The transmission will be terminated as soon as the peer stops sending.
Broken - The communication channel is unavailable due to a fault in the carrier signal (the traffic signal).
Context
- MIB
- LUM-DCN-MIB
- OID
.1.3.6.1.4.1.8708.2.20.2.7.1.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dcnCcEntry
- Table
- dcnCcTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notPresent |
2 | down |
3 | calling |
4 | up |
5 | waitToHangup |
6 | broken |
7 | restarting |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcnCcIndex An arbitrary index assigned to each entry. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.20.2.7.1.1.1 |
| dcnCcErrorCounter The counter associated FEC errors of the management channel.
The errors are accumulated since last reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.8708.2.20.2.7.1.1.10 |
| dcnCcResetCounter Reset the error counter to 0. | column | Enumeration | .1.3.6.1.4.1.8708.2.20.2.7.1.1.11 |
| dcnCcFecFailure FEC failure | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.20.2.7.1.1.12 |
| dcnCcTrxNotSupportCommChannel Trx does not support communication channel
The inserted transceiver does not support usage of communication channel.
Alarm - The transceiver does not… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.20.2.7.1.1.13 |
| dcnCcConfigurationMismatch Communication channel configuration mismatch
Local communication channel is configured, but the remote side sends enabled=False.
This mismatch must be persistent fo… | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.20.2.7.1.1.14 |
| dcnCcName The management name of the communication channel interface, for example
'line:1:1:1-2', where the first number indicates subrack,
the second slot number and the third is the port … | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.20.2.7.1.1.2 |
| dcnCcDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.20.2.7.1.1.3 |
| dcnCcSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.20.2.7.1.1.4 |
| dcnCcSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.20.2.7.1.1.5 |
| dcnCcTxPort The number of the port where the TX-side of the
interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.20.2.7.1.1.6 |
| dcnCcRxPort The number of the port where the RX-side of the
interface is located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.20.2.7.1.1.7 |
| dcnCcAdminStatus The administrative state for the communication channel link.
down - The communication channel link should be inactive.
service - The link is activate… | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.20.2.7.1.1.8 |