LUM-AUX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
207

auxSnmpTable

table
.1.3.6.1.4.1.8708.2.29.2.2.1 · 1 row entry · 16 columns
Open in standard view 
The list of SNMP managed equipment.
auxSnmpEntry entry .1.3.6.1.4.1.8708.2.29.2.2.1.1
An entry in the SNMP managed equipment list.
Indexes
auxSnmpIndex
Column Syntax OID
auxSnmpIndex
An arbitrary index assigned to each
equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.1
auxSnmpName
The name of the SNMP managed equipment.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.2
auxSnmpDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.3
auxSnmpAddress
The IP address for the SNMP
managed equipment.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.4
auxSnmpVersion
SNMP protocol version.
Enumerationr/w
Enumerated Values:
1v1
2v2c
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.5
auxSnmpPort
The port number for the
SNMP managed equipment.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.6
auxSnmpReadCommunity
The community string to use when
reading information from the SNMP
managed equipment.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.7
auxSnmpWriteCommunity
The community string to use when
configuring the SNMP managed equipment.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.8
auxSnmpAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.9
auxSnmpOperStatus
The operational state for the object.

notPresent - The HW related to the object
is not available

down - The object is de-activated or there are
faults preventing it from going to the 'up'-s…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.10
auxSnmpInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.11
auxSnmpHostUnreachable
Can not contact the remote external equipment.
Check address and community strings.

A(ctivation): Contact lost

D(e-activation): Contact stablished again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.12
auxSnmpSnmpError
Can not login to the remote external equipment

A(ctivation): Contact lost

D(e-activation): Contact stablished again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.13
auxSnmpUnexpectedEquipmentType
The remote external equipment is not of the
expected type.

A(ctivation): Wrong equipment detected

D(e-activation): Expected equipment detected
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.14
auxSnmpInconsistentConfiguration
Changes in the configuration of the remote
equipment has been detected.

This could happen if some other SNMP-manager
is manipulating the configuration, or the
configuration is changed via some local CLI.
…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.15
auxSnmpConfigurationProblem
The SNMP-manager can not configure the remote
equipment.

A possible cause could be that the writeCommunity
does not match the remote equipment.

A(ctivation): A number of consecutive write
…
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.2.1.1.16

auxFxIfTable

table
.1.3.6.1.4.1.8708.2.29.2.3.1 · 1 row entry · 14 columns
Open in standard view 
The list of OAS modules.
auxFxIfEntry entry .1.3.6.1.4.1.8708.2.29.2.3.1.1
An entry in the OAS module list.
Indexes
auxFxIfIndex
Column Syntax OID
auxFxIfIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.1
auxFxIfName
The name of the FxIf.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.2
auxFxIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.3
auxFxIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.4
auxFxIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.5
auxFxIfTxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.6
auxFxIfRxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.7
auxFxIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.8
auxFxIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.9
auxFxIfOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing it from going to the 'up'-state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.10
auxFxIfRxPowerLevel
The received power level in units of 0.1 dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.11
auxFxIfLossOfSignalThreshold
The lower threshold for received power level in
units of 0.1 dBm.

Note: Depending on the type of board and interface
the value range may vary.
Integer32r/w
Constraints:
range: -350--60
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.12
auxFxIfLossOfSignal
Loss of signal.
Applicable for all signal formats.

A(ctivation): Active loss of signal HW indication.

D(e-activation): Inactive loss of signal HW
indication.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.13
auxFxIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.3.1.1.14

auxEquipmentTable

table
.1.3.6.1.4.1.8708.2.29.2.4.1 · 1 row entry · 17 columns
Open in standard view 
The list of OAS modules.
auxEquipmentEntry entry .1.3.6.1.4.1.8708.2.29.2.4.1.1
An entry in the OAS module list.
Indexes
auxEquipmentIndex
Column Syntax OID
auxEquipmentIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.1
auxEquipmentName
The name of the equipment.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.2
auxEquipmentDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.3
auxEquipmentSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.4
auxEquipmentSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.5
auxEquipmentAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.6
auxEquipmentOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing it from going to the 'up'-state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.7
auxEquipmentPowerFailure
Remote equipment reports power failure.

A(ctivation): Power failure detected

D(e-activation): Power failure no longer active
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.8
auxEquipmentFanProblem
Remote equipment report problem with built-in
fan unit.

A(ctivation): Fan problem detected

D(e-activation): Fan problem no longer active
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.9
auxEquipmentObjectProperty
Property mask
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.10
auxEquipmentPumpsEol
Shows the end-of-life status of the HW.

For the RAMAN, the alarm is active if the
current of any of the pumps has reached its
end-of-life threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.11
auxEquipmentSelfTestFailure
Indicates if the built-in self-test
failed.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.12
auxEquipmentAmbientTemp
Shows the ambient temperature of the
equipment.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.13
auxEquipmentRebootEquipment
Executing this procedure will initiate a reboot
of the auxiliary equipment.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.14
auxEquipmentPowerAMissing
Status of 1U Power A missing Alarm.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.15
auxEquipmentPowerBMissing
Status of 1U Power B missing Alarm.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.16
auxEquipmentConfigurationMismatch
A configuration request has failed and there might now be a mismatch in configuration between tm3000 and external system.

A: A configuration request failed.

D: The configuration is re-sent …
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.4.1.1.17

auxRamanIfTable

table
.1.3.6.1.4.1.8708.2.29.2.5.1 · 1 row entry · 52 columns
Open in standard view 
The list of RAMAN i/f.
auxRamanIfEntry entry .1.3.6.1.4.1.8708.2.29.2.5.1.1
An entry in the RAMAN i/f list.
Indexes
auxRamanIfIndex
Column Syntax OID
auxRamanIfIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.1
auxRamanIfName
The name of the FxIf.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.2
auxRamanIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.3
auxRamanIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.4
auxRamanIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.5
auxRamanIfTxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.6
auxRamanIfRxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.7
auxRamanIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.8
auxRamanIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.9
auxRamanIfOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing it from going to the 'up'-state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.10
auxRamanIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.11
auxRamanIfModuleOperationMode
Module operational mode.
Enumeration
Enumerated Values:
1coPropagating
2counterPropagating
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.12
auxRamanIfPumpsOperationMode
Pumps operational mode.
Enumerationr/w
Enumerated Values:
1maxPumpsPower
2manualPumpsPower
3automaticalGainControl
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.13
auxRamanIfPumpsOperationModeConfig
Configure pumps operational mode.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.14
auxRamanIfLineFiberType
Line fiber type (for adaptive
gain flattening).
Enumerationr/w
Enumerated Values:
1ftSMF
2ftLeaf
3ftTrueWave
4ftG654
5ftTeralight
6ftG653
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.15
auxRamanIfAutoRestartProcTime
Automatic Restart Procedure restart time.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.16
auxRamanIfArpPauseStatus
Shows whether the Raman amplifier is in
Automatic Restart Procedure restart
state.
Enumeration
Enumerated Values:
1normal
2pause
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.17
auxRamanIfPumpsStatus
Shows whether the pumps are active or not.
Enumeration
Enumerated Values:
1shutdown
2active
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.18
auxRamanIfTotalPumpsPower
The total power of the pumps.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.19
auxRamanIfPump1WantedPower
The wanted power of the higher pump.
Used for manual configuration.
Unsigned32r/w
Constraints:
range: 100-4000
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.20
auxRamanIfPump1ActualPower
The actual power of the higher pump.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.21
auxRamanIfPump1Current
The current of the higher pump.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.22
auxRamanIfPump1Temperature
The temperature of the higher pump.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.23
auxRamanIfPump2WantedPower
The wanted power of the higher pump.
Used for manual configuration.
Unsigned32r/w
Constraints:
range: 100-4000
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.24
auxRamanIfPump2ActualPower
The actual power of the higher pump.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.25
auxRamanIfPump2Current
The current of the higher pump.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.26
auxRamanIfPump2Temperature
The temperature of the higher pump.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.27
auxRamanIfWantedGain
The wanted gain.
Used in gain-mode.
Unsigned32r/w
Constraints:
range: 30-200
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.28
auxRamanIfActualGain
The actual gain.
Used in gain-mode.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.29
auxRamanIfReceivedPowerLevel
The received power on the line i/f.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.30
auxRamanIfReflectionPowerLevel
The received reflection power.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.31
auxRamanIfReflectionPowerRatio
The received reflection power in relation
to the power of the pumps.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.32
auxRamanIf1510BandReceivedPowerLevel
The received power in the 1510 band.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.33
auxRamanIfOscReceivedPowerLevel
The received power of the OSC channel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.34
auxRamanIfAPRState
Shows the state of the Automatic
Power Reduction procedure
Enumeration
Enumerated Values:
1normal
2shutdown
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.35
auxRamanIfOscDitherState
Shows the dithering state of the
Optical Supervisiory Channel.
Enumeration
Enumerated Values:
1normal
2lost
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.36
auxRamanIfLineLossOfSignal
The input line signal is lost.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.37
auxRamanIfOscDitherLos
The dithering of the OSC channel is lost.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.38
auxRamanIfHighBackReflection
High back-reflection power detected.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.39
auxRamanIfHighLineOutputPower
High line output power is detected.
The power is decreased not to exceed
the maximum power
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.40
auxRamanIfLowLineOutputPower
Low output power is detected.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.41
auxRamanIfModuleTempTooHigh
Too high ambient temperature of the amplifier
module causing shut down.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.42
auxRamanIfModuleTempHigh
High ambient temperature of the amplifier module.
Crossed warning threshold
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.43
auxRamanIfPumpsTempTooHigh
Too high temperature of the pumps causing
shut down.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.44
auxRamanIfPumpsTempHigh
High temperature of the pumps.
Crossed warning threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.45
auxRamanIfAprShutdown
Shows if the pumps have been shutdown
according to any of the APR or ALS
schemes.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.46
auxRamanIfLineFiberDeteriorated
The quality of the line fiber has
changed (deteriorated).
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.47
auxRamanIf1510BandPowerLos
The power of the 1510 band has been lost.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.48
auxRamanIfManualRestartTrial
Executing this procedure initiates a manual
restart trial.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.49
auxRamanIfModuleTemp
Shows the ambient temperature of the
amplifier module.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.50
auxRamanIfTxSignalStatus
The operational state for outgoing (TX) signal
of the interface.

down - A fault that would lead to a protection
switch has occurred.

degraded - The signal quality is impaired.
…
Enumeration
Enumerated Values:
1down
2degraded
3up
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.51
auxRamanIfRxSignalStatus
The operational state for incoming (RX) signal
of the interface.

down - A major fault has occurred

degraded - The signal quality is impaired.

up - The signal is OK.
Enumeration
Enumerated Values:
1down
2degraded
3up
 .1.3.6.1.4.1.8708.2.29.2.5.1.1.52

auxRamanSafetyTable

table
.1.3.6.1.4.1.8708.2.29.2.6.1 · 1 row entry · 31 columns
Open in standard view 
The list of safety modules.
auxRamanSafetyEntry entry .1.3.6.1.4.1.8708.2.29.2.6.1.1
An entry in the safety list.
Indexes
auxRamanSafetyIndex
Column Syntax OID
auxRamanSafetyIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.1
auxRamanSafetyName
The name of the ramanSafety object.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.2
auxRamanSafetyDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.3
auxRamanSafetySubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.4
auxRamanSafetySlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.5
auxRamanSafetyTxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.6
auxRamanSafetyRxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.7
auxRamanSafetyInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.8
auxRamanSafetyObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.9
auxRamanSafetyShutDownAtInputLoss
This parameter controls whether the
amplifier will shut down in the following
situation:

Loss of input power
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.10
auxRamanSafetyShutDownAtHighTemp
This parameter controls whether the
amplifier will shut down in the following
situation:

The temperature of the pumps or the
modules is high.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.11
auxRamanSafetyShutDownAtHighBackReflection
This parameter controls whether the
amplifier will shut down in the following
situation:

There is a high back reflection of power,
indication that there might be a fibre
break.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.12
auxRamanSafetyHighBackReflectionThreshold
The threshold for back reflection
causing amplifier pumps to shut down.

The threshold is a ratio expressed in
dB relative to the output power of the
amplifier.
Integer32r/w
Constraints:
range: -28--19
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.13
auxRamanSafetyShutDownAtOscLoss
This parameter controls whether the
amplifier will shut down in the following
situation:

The signal from the OSC channel is lost.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.14
auxRamanSafetyShutDownAt1510BandDrop
This parameter controls whether the
amplifier will shut down in the following
situation:

The power from the 1510 band drops.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.15
auxRamanSafetyShutDownAtInputLossConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.16
auxRamanSafetyShutDownAtHighTempConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.17
auxRamanSafetyShutDownAtHighBackReflectionConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.18
auxRamanSafetyShutDownAtOscLossConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.19
auxRamanSafetyShutDownAt1510BandDropConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.20
auxRamanSafetyPasswd
Password protecting the safety parameters

If password is '-' (dash), then the password
control is disabled.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.21
auxRamanSafetyPasswdConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.22
auxRamanSafety1510BandDropThreshold
The threshold for OSC band drop
causing pumps shut down.
Integer32r/w
Constraints:
range: 1-50
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.23
auxRamanSafetyInhibitStartAtOscLoss
This parameter controls whether the
amplifier is allowed to turn on in
a situation where the OSC is missing
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.24
auxRamanSafetyInhibitStartAtOscLossConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.25
auxRamanSafetyShutDownAtLowBandDrop
This parameter controls whether the
amplifier will shut down in the following
situation:

Low L-band scattering is detected.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.26
auxRamanSafetyLowBandScatteringThreshold
The threshold for safety parameter 'Shut down
at L-band power drop'.
Integer32r/w
Constraints:
range: -450--250
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.27
auxRamanSafetyShutDownAtLowBandDropConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.28
auxRamanSafetyAmplifierSwitch
Enable activating or disable of the pumps operation.
When switch in Enabled mode,
pumps are activated to last operation mode
and power/current/gain settings
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.29
auxRamanSafetyAmplifierSwitchConfig
.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.30
auxRamanSafetyLowBandScatteringTolerance
The transient tolerance (expressed in dB) for safety parameter
'Shut down at L-band drop'.
Integer32r/w
Constraints:
range: 10-20
 .1.3.6.1.4.1.8708.2.29.2.6.1.1.31

auxPEIfTable

table
.1.3.6.1.4.1.8708.2.29.2.7.1 · 1 row entry · 35 columns
Open in standard view 
The list of PE i/f.
auxPEIfEntry entry .1.3.6.1.4.1.8708.2.29.2.7.1.1
An entry in the PE i/f list.
Indexes
auxPEIfIndex
Column Syntax OID
auxPEIfIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.1
auxPEIfName
The name of the FxIf.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.2
auxPEIfDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.3
auxPEIfSubrack
The number of the subrack where the interface
is located.
LUM-TCSubrackNumber
Textual Convention: LUM-TCSubrackNumber Unsigned32
Type Constraints:
range: 0..15
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.4
auxPEIfSlot
The number of the slot where the interface is
located.
LUM-TCSlotNumber
Textual Convention: LUM-TCSlotNumber Unsigned32
Type Constraints:
range: 0..22
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.5
auxPEIfTxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.6
auxPEIfRxPort
The number of the port where the interface is
located.
LUM-TCPortNumber
Textual Convention: LUM-TCPortNumber Unsigned32
Type Constraints:
range: 0..116
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.7
auxPEIfInvPhysIndexOrZero
The row in the invPhysTable for this interface.
Set to 0 if not known.
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.8
auxPEIfAdminStatus
The administrative state for the interface.

down - The interface should be inactive.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-co…
LUM-TCBoardOrInterfaceAdminStatusr/w
Textual Convention: LUM-TCBoardOrInterfaceAdminStatus Enumeration
Type Values:
1down
2service
3up
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.9
auxPEIfOperStatus
The operational state for the interface.

notPresent - The interface is not available.

down - The interface is de-activated or there are
faults preventing it from going to the 'up'-state.
…
LUM-TCBoardOrInterfaceOperStatus
Textual Convention: LUM-TCBoardOrInterfaceOperStatus Enumeration
Type Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.10
auxPEIfObjectProperty
Property mask.
LUM-TCObjectProperty
Textual Convention: LUM-TCObjectProperty Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.11
auxPEIfPumpsOperationMode
In constant power mode the desired power has to be set.
In constant gain the desired output gain should be set.
Enumerationr/w
Enumerated Values:
1constantPower
2constantGain
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.12
auxPEIfPumpsOperationModeConfig
Configure pumps operational mode.
In constant power mode the desired power has to be set.
In constant gain mode the desired output gain should be set.
LUM-TCCommandString
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.13
auxPEIfAutoRestartProcTime
Automatic Restart Procedure restart time.
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.14
auxPEIfPumpsStatus
Shows whether the pumps are active or not.
Enumeration
Enumerated Values:
1shutdown
2active
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.15
auxPEIfWantedPower
Output power setting for constant power operation mode.
Integer32r/w
Constraints:
range: 100-261
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.16
auxPEIfWantedGain
Required gain value in dB for constant gain operation mode.
Unsigned32r/w
Constraints:
range: 50-90
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.17
auxPEIfPumpsTotalCurrent
Pumps total current
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.18
auxPEIfPump1Temperature
The temperature of the higher pump.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.19
auxPEIfActualGain
The actual gain of the Amplifier (deci-dB).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.20
auxPEIfReceivedPowerLevel
Input Power (Forward mode) (deci-dBm).
Please Note: Original value of Float type was transformed to an integer,
therefore the MIB value is presented in deci-dBm. (i.e. 50.5 dBm transformed to 505 deci-dBm).
Any EMS GUI …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.21
auxPEIfCombinedOutPwrLevel
Line Interface combined Output Power (deci-dBm).
Please Note: Original value of Float type was transformed to an integer,
therefore the MIB value is presented in deci-dBm. (i.e. 50.5 dBm transformed to 505 deci-dBm).
An…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.22
auxPEIfReflectionPowerLevel
The received reflection power.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.23
auxPEIfReflectionPowerRatio
The received reflection power in relation
to the power of the pumps.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.24
auxPEIfLowBandScatteredPowerLevel
The scattered power in the L-band.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.25
auxPEIfLineLossOfSignal
The input line signal is lost.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.26
auxPEIfHighBackReflection
High back-reflection power detected.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.27
auxPEIfAutoPowerReduction
Automatic Power Reduction
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.28
auxPEIfLowLineOutputPower
Low output power is detected.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.29
auxPEIfModuleTempTooHigh
Too high ambient temperature of the amplifier
module causing shut down.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.30
auxPEIfModuleTempHigh
High ambient temperature of the amplifier module.
Crossed warning threshold
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.31
auxPEIfPumpsTempTooHigh
Too high temperature of the pumps causing
shut down.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.32
auxPEIfPumpsTempHigh
High temperature of the pumps.
Crossed warning threshold.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.33
auxPEIfModuleTemp
Shows the ambient temperature of the
amplifier module.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.34
auxPEIfPump2Temperature
Pump #2 temperature.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.7.1.1.35

auxNodeTable

table
.1.3.6.1.4.1.8708.2.29.2.8.1 · 1 row entry · 11 columns
Open in standard view 
The list of Node (TM2000) stuff.
auxNodeEntry entry .1.3.6.1.4.1.8708.2.29.2.8.1.1
An entry in the Node list.
Indexes
auxNodeIndex
Column Syntax OID
auxNodeIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.1
auxNodeName
The name of the Node.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.2
auxNodeDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.3
auxNodeIpAddress
The IP address for the TM2000 node. The default value is set to 10.0.<subrack>.11 at system start-up.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.4
auxNodePort
The server port number for the TM2000 node.
Unsigned32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.5
auxNodeEventPort
The event port number for the TM2000 node.
Unsigned32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.6
auxNodeTime
The date and time of the TM2000 node.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.7
auxNodeNtpPrimary
The primary NTP Server address. This will
default be set to master CU IP address which
is 10.0.1.1.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.8
auxNodeNtpSecondary
The secondary NTP Server address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.9
auxNodeChangeLocalTime
Change the local date and time.

Year - If no century is input the
current century is set by default.

Month - 1 to 12

Day - 1 to 31

Hour - 0 to 23
…
LUM-TCCommandStringr/w
Textual Convention: LUM-TCCommandString OctetString
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.10
auxNodeHostUnreachable
Can not contact the remote external equipment.
Check address and ports.

A(ctivation): Contact lost

D(e-activation): Contact established again
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.8.1.1.11

auxCabinetTable

table
.1.3.6.1.4.1.8708.2.29.2.9.1 · 1 row entry · 16 columns
Open in standard view 
The list of Cabinet stuff.
auxCabinetEntry entry .1.3.6.1.4.1.8708.2.29.2.9.1.1
An entry in the Cabinet list.
Indexes
auxCabinetIndex
Column Syntax OID
auxCabinetIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.1
auxCabinetName
The name of the cabinet.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.2
auxCabinetDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.3
auxCabinetAdminStatus
The administrative state of the cabinet.

down - The interface is de-activated.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-configur…
LUM-TCAdminStatusWithNAr/w
Textual Convention: LUM-TCAdminStatusWithNA Enumeration
Type Values:
1down
2service
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.4
auxCabinetOperStatus
Cabinet operational status
Enumeration
Enumerated Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.5
auxCabinetUpId
Identity in the UP for the auxCabinet entry in the traffic unit
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.6
auxCabinetIndoorTemp
The indoor temperature in the cabinet in 0.1 degrees centigrade.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.7
auxCabinetOutdoorTemp
The outdoor temperature in the cabinet in 0.1 degrees centigrade.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.8
auxCabinetOperMode
Cabinet operating mode
Enumeration
Enumerated Values:
0off
1cooling
2heating
3nightmode
4tsf
5selftest
6manual
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.9
auxCabinetDoorAlarm
Alarm: The cabinet door is opened.

OK: The cabinet door is closed.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.10
auxCabinetSPDAlarm
Alarm: Surge Protection Device alarm.

OK: Surge Protection Device ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.11
auxCabinetHighTempAlarm
Alarm: Cabinet temperature too high.

OK: Cabinet temperature ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.12
auxCabinetCtrlFailAlarm
Alarm: Cabinet controller failure.

OK: Cabinet controller ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.13
auxCabinetHeatFailAlarm
Alarm: Cabinet heater failure.

OK: Cabinet heater ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.14
auxCabinetExtTempFailAlarm
Alarm: Cabinet external temp sensor failure.

OK: Cabinet external temp sensor ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.15
auxCabinetIntTempFailAlarm
Alarm: Cabinet internal temp sensor failure.

OK: Cabinet internal temp sensor ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.9.1.1.16

auxFanTable

table
.1.3.6.1.4.1.8708.2.29.2.10.1 · 1 row entry · 8 columns
Open in standard view 
A list of Fans.
auxFanEntry entry .1.3.6.1.4.1.8708.2.29.2.10.1.1
An entry in the Fan list.
Indexes
auxFanIndex
Column Syntax OID
auxFanIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.1
auxFanName
The name of the fan.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.2
auxFanDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.3
auxFanAdminStatus
The administrative state of the fan.

down - The interface is de-activated.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-configuratio…
LUM-TCAdminStatusWithNAr/w
Textual Convention: LUM-TCAdminStatusWithNA Enumeration
Type Values:
1down
2service
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.4
auxFanOperStatus
Fan operational status
Enumeration
Enumerated Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.5
auxFanUpId
Identity in the UP for the auxFan entry in the traffic unit
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.6
auxFanFailure
Alarm: The fan has failed.

OK: The fan is ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.7
auxFanRPM
The fan RPM.
LUM-TCSigned32WithNA
Textual Convention: LUM-TCSigned32WithNA Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8708.2.29.2.10.1.1.8

auxFanGroupTable

table
.1.3.6.1.4.1.8708.2.29.2.11.1 · 1 row entry · 7 columns
Open in standard view 
A list of FanGroups.
auxFanGroupEntry entry .1.3.6.1.4.1.8708.2.29.2.11.1.1
An entry in the FanGroup list.
Indexes
auxFanGroupIndex
Column Syntax OID
auxFanGroupIndex
An arbitrary index assigned to each
configuration equipment.
Unsigned32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.1
auxFanGroupName
The name of the fan group.
LUM-TCMgmtNameString
Textual Convention: LUM-TCMgmtNameString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.2
auxFanGroupDescr
User configurable label.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.3
auxFanGroupAdminStatus
The administrative state of the fan group.

down - The interface is de-activated.

service - The interface is activated but alarms
are suppressed. Intended for use during service
or re-config…
LUM-TCAdminStatusWithNAr/w
Textual Convention: LUM-TCAdminStatusWithNA Enumeration
Type Values:
1down
2service
3up
2147483647notApplicable
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.4
auxFanGroupOperStatus
FanGroup operational status
Enumeration
Enumerated Values:
1notPresent
2down
3up
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.5
auxFanGroupUpId
Identity in the UP for the auxFanGroup entry in the traffic unit
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.6
auxFanGroupFailure
Alarm: The fan group has failed.

OK: The fan group is ok.
LUM-TCFaultStatus
Textual Convention: LUM-TCFaultStatus Enumeration
Type Values:
1ok
2alarm
 .1.3.6.1.4.1.8708.2.29.2.11.1.1.7