auxRamanSafetyLowBandScatteringThreshold
LUM-AUX-MIB ·
.1.3.6.1.4.1.8708.2.29.2.6.1.1.27
Object
column
r/w
Integer32
The threshold for safety parameter 'Shut down at L-band power drop'.
Context
- MIB
- LUM-AUX-MIB
- OID
.1.3.6.1.4.1.8708.2.29.2.6.1.1.27- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- auxRamanSafetyEntry
- Table
- auxRamanSafetyTable
- Siblings
- 30
Syntax
Integer32
Values & Constraints
Object Constraints
range: -450--250
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| auxRamanSafetyIndex An arbitrary index assigned to each
configuration equipment. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.6.1.1.1 |
| auxRamanSafetyShutDownAtInputLoss This parameter controls whether the
amplifier will shut down in the following
situation:
Loss of input power | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.10 |
| auxRamanSafetyShutDownAtHighTemp This parameter controls whether the
amplifier will shut down in the following
situation:
The temperature of the pumps or the
modules is high. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.11 |
| auxRamanSafetyShutDownAtHighBackReflection This parameter controls whether the
amplifier will shut down in the following
situation:
There is a high back reflection of power,
indication that there might b… | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.12 |
| auxRamanSafetyHighBackReflectionThreshold The threshold for back reflection
causing amplifier pumps to shut down.
The threshold is a ratio expressed in
dB relative to the output power of the
amplifier. | column | Integer32 | .1.3.6.1.4.1.8708.2.29.2.6.1.1.13 |
| auxRamanSafetyShutDownAtOscLoss This parameter controls whether the
amplifier will shut down in the following
situation:
The signal from the OSC channel is lost. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.14 |
| auxRamanSafetyShutDownAt1510BandDrop This parameter controls whether the
amplifier will shut down in the following
situation:
The power from the 1510 band drops. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.15 |
| auxRamanSafetyShutDownAtInputLossConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.16 |
| auxRamanSafetyShutDownAtHighTempConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.17 |
| auxRamanSafetyShutDownAtHighBackReflectionConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.18 |
| auxRamanSafetyShutDownAtOscLossConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.19 |
| auxRamanSafetyName The name of the ramanSafety object. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.2 |
| auxRamanSafetyShutDownAt1510BandDropConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.20 |
| auxRamanSafetyPasswd Password protecting the safety parameters
If password is '-' (dash), then the password
control is disabled. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.21 |
| auxRamanSafetyPasswdConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.22 |
| auxRamanSafety1510BandDropThreshold The threshold for OSC band drop
causing pumps shut down. | column | Integer32 | .1.3.6.1.4.1.8708.2.29.2.6.1.1.23 |
| auxRamanSafetyInhibitStartAtOscLoss This parameter controls whether the
amplifier is allowed to turn on in
a situation where the OSC is missing | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.24 |
| auxRamanSafetyInhibitStartAtOscLossConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.25 |
| auxRamanSafetyShutDownAtLowBandDrop This parameter controls whether the
amplifier will shut down in the following
situation:
Low L-band scattering is detected. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.26 |
| auxRamanSafetyShutDownAtLowBandDropConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.28 |
| auxRamanSafetyAmplifierSwitch Enable activating or disable of the pumps operation.
When switch in Enabled mode,
pumps are activated to last operation mode
and power/current/gain settings | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.6.1.1.29 |
| auxRamanSafetyDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.3 |
| auxRamanSafetyAmplifierSwitchConfig . | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.6.1.1.30 |
| auxRamanSafetyLowBandScatteringTolerance The transient tolerance (expressed in dB) for safety parameter
'Shut down at L-band drop'. | column | Integer32 | .1.3.6.1.4.1.8708.2.29.2.6.1.1.31 |
| auxRamanSafetySubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.29.2.6.1.1.4 |
| auxRamanSafetySlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.29.2.6.1.1.5 |
| auxRamanSafetyTxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.29.2.6.1.1.6 |
| auxRamanSafetyRxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.29.2.6.1.1.7 |
| auxRamanSafetyInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.6.1.1.8 |
| auxRamanSafetyObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.29.2.6.1.1.9 |