auxPEIfAutoRestartProcTime
LUM-AUX-MIB ·
.1.3.6.1.4.1.8708.2.29.2.7.1.1.14
Object
column
r/w
Unsigned32
Automatic Restart Procedure restart time.
Context
- MIB
- LUM-AUX-MIB
- OID
.1.3.6.1.4.1.8708.2.29.2.7.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- auxPEIfEntry
- Table
- auxPEIfTable
- Siblings
- 34
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| auxPEIfIndex An arbitrary index assigned to each
configuration equipment. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.1 |
| auxPEIfOperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is de-activated or there are
faults preven… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.10 |
| auxPEIfObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.29.2.7.1.1.11 |
| auxPEIfPumpsOperationMode In constant power mode the desired power has to be set.
In constant gain the desired output gain should be set. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.7.1.1.12 |
| auxPEIfPumpsOperationModeConfig Configure pumps operational mode.
In constant power mode the desired power has to be set.
In constant gain mode the desired output gain should be set. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.7.1.1.13 |
| auxPEIfPumpsStatus Shows whether the pumps are active or not. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.7.1.1.15 |
| auxPEIfWantedPower Output power setting for constant power operation mode. | column | Integer32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.16 |
| auxPEIfWantedGain Required gain value in dB for constant gain operation mode. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.17 |
| auxPEIfPumpsTotalCurrent Pumps total current | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.18 |
| auxPEIfPump1Temperature The temperature of the higher pump. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.19 |
| auxPEIfName The name of the FxIf. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.29.2.7.1.1.2 |
| auxPEIfActualGain The actual gain of the Amplifier (deci-dB). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.20 |
| auxPEIfReceivedPowerLevel Input Power (Forward mode) (deci-dBm).
Please Note: Original value of Float type was transformed to an integer,
therefore the MIB value is presented in deci-dBm. (i.e. 50.5 dBm tr… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.21 |
| auxPEIfCombinedOutPwrLevel Line Interface combined Output Power (deci-dBm).
Please Note: Original value of Float type was transformed to an integer,
therefore the MIB value is presented in deci-dBm. (i.e. 5… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.22 |
| auxPEIfReflectionPowerLevel The received reflection power. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.23 |
| auxPEIfReflectionPowerRatio The received reflection power in relation
to the power of the pumps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.24 |
| auxPEIfLowBandScatteredPowerLevel The scattered power in the L-band. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.25 |
| auxPEIfLineLossOfSignal The input line signal is lost. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.26 |
| auxPEIfHighBackReflection High back-reflection power detected. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.27 |
| auxPEIfAutoPowerReduction Automatic Power Reduction | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.28 |
| auxPEIfLowLineOutputPower Low output power is detected. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.29 |
| auxPEIfDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.29.2.7.1.1.3 |
| auxPEIfModuleTempTooHigh Too high ambient temperature of the amplifier
module causing shut down. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.30 |
| auxPEIfModuleTempHigh High ambient temperature of the amplifier module.
Crossed warning threshold | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.31 |
| auxPEIfPumpsTempTooHigh Too high temperature of the pumps causing
shut down. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.32 |
| auxPEIfPumpsTempHigh High temperature of the pumps.
Crossed warning threshold. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.33 |
| auxPEIfModuleTemp Shows the ambient temperature of the
amplifier module. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.34 |
| auxPEIfPump2Temperature Pump #2 temperature. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.35 |
| auxPEIfSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.29.2.7.1.1.4 |
| auxPEIfSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.29.2.7.1.1.5 |
| auxPEIfTxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.29.2.7.1.1.6 |
| auxPEIfRxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.29.2.7.1.1.7 |
| auxPEIfInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.7.1.1.8 |
| auxPEIfAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.29.2.7.1.1.9 |