auxPEIfPumpsOperationModeConfig

LUM-AUX-MIB · .1.3.6.1.4.1.8708.2.29.2.7.1.1.13
MIB view Table view

Object

column LUM-TCCommandString 
Configure pumps operational mode.
In constant power mode the desired power has to be set.
In constant gain mode the desired output gain should be set.

Context

MIB
LUM-AUX-MIB
OID
.1.3.6.1.4.1.8708.2.29.2.7.1.1.13
Type
column
Access
readonly
Status
current
Parent
auxPEIfEntry
Table
auxPEIfTable
Siblings
34

Syntax

LUM-TCCommandString
Source
LUM-TCCommandString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
auxPEIfIndex
An arbitrary index assigned to each configuration equipment.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.7.1.1.1
auxPEIfOperStatus
The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preven…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.10
auxPEIfObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.29.2.7.1.1.11
auxPEIfPumpsOperationMode
In constant power mode the desired power has to be set. In constant gain the desired output gain should be set.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.7.1.1.12
auxPEIfAutoRestartProcTime
Automatic Restart Procedure restart time.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.7.1.1.14
auxPEIfPumpsStatus
Shows whether the pumps are active or not.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.7.1.1.15
auxPEIfWantedPower
Output power setting for constant power operation mode.
columnInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.16
auxPEIfWantedGain
Required gain value in dB for constant gain operation mode.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.7.1.1.17
auxPEIfPumpsTotalCurrent
Pumps total current
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.29.2.7.1.1.18
auxPEIfPump1Temperature
The temperature of the higher pump.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.19
auxPEIfName
The name of the FxIf.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.29.2.7.1.1.2
auxPEIfActualGain
The actual gain of the Amplifier (deci-dB).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.20
auxPEIfReceivedPowerLevel
Input Power (Forward mode) (deci-dBm). Please Note: Original value of Float type was transformed to an integer, therefore the MIB value is presented in deci-dBm. (i.e. 50.5 dBm tr…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.21
auxPEIfCombinedOutPwrLevel
Line Interface combined Output Power (deci-dBm). Please Note: Original value of Float type was transformed to an integer, therefore the MIB value is presented in deci-dBm. (i.e. 5…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.22
auxPEIfReflectionPowerLevel
The received reflection power.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.23
auxPEIfReflectionPowerRatio
The received reflection power in relation to the power of the pumps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.24
auxPEIfLowBandScatteredPowerLevel
The scattered power in the L-band.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.25
auxPEIfLineLossOfSignal
The input line signal is lost.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.26
auxPEIfHighBackReflection
High back-reflection power detected.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.27
auxPEIfAutoPowerReduction
Automatic Power Reduction
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.28
auxPEIfLowLineOutputPower
Low output power is detected.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.29
auxPEIfDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.29.2.7.1.1.3
auxPEIfModuleTempTooHigh
Too high ambient temperature of the amplifier module causing shut down.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.30
auxPEIfModuleTempHigh
High ambient temperature of the amplifier module. Crossed warning threshold
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.31
auxPEIfPumpsTempTooHigh
Too high temperature of the pumps causing shut down.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.32
auxPEIfPumpsTempHigh
High temperature of the pumps. Crossed warning threshold.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.33
auxPEIfModuleTemp
Shows the ambient temperature of the amplifier module.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.34
auxPEIfPump2Temperature
Pump #2 temperature.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.7.1.1.35
auxPEIfSubrack
The number of the subrack where the interface is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.29.2.7.1.1.4
auxPEIfSlot
The number of the slot where the interface is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.29.2.7.1.1.5
auxPEIfTxPort
The number of the port where the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.29.2.7.1.1.6
auxPEIfRxPort
The number of the port where the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.29.2.7.1.1.7
auxPEIfInvPhysIndexOrZero
The row in the invPhysTable for this interface. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.7.1.1.8
auxPEIfAdminStatus
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.29.2.7.1.1.9