auxRamanIfPumpsOperationModeConfig
LUM-AUX-MIB ·
.1.3.6.1.4.1.8708.2.29.2.5.1.1.14
Object
column
LUM-TCCommandString
Configure pumps operational mode.
Context
- MIB
- LUM-AUX-MIB
- OID
.1.3.6.1.4.1.8708.2.29.2.5.1.1.14- Type
- column
- Access
- readonly
- Status
- current
- Parent
- auxRamanIfEntry
- Table
- auxRamanIfTable
- Siblings
- 51
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| auxRamanIfIndex An arbitrary index assigned to each
configuration equipment. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.1 |
| auxRamanIfOperStatus The operational state for the interface.
notPresent - The interface is not available.
down - The interface is de-activated or there are
faults preven… | column | LUM-TCBoardOrInterfaceOperStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.10 |
| auxRamanIfObjectProperty Property mask. | column | LUM-TCObjectProperty | .1.3.6.1.4.1.8708.2.29.2.5.1.1.11 |
| auxRamanIfModuleOperationMode Module operational mode. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.12 |
| auxRamanIfPumpsOperationMode Pumps operational mode. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.13 |
| auxRamanIfLineFiberType Line fiber type (for adaptive
gain flattening). | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.15 |
| auxRamanIfAutoRestartProcTime Automatic Restart Procedure restart time. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.16 |
| auxRamanIfArpPauseStatus Shows whether the Raman amplifier is in
Automatic Restart Procedure restart
state. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.17 |
| auxRamanIfPumpsStatus Shows whether the pumps are active or not. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.18 |
| auxRamanIfTotalPumpsPower The total power of the pumps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.19 |
| auxRamanIfName The name of the FxIf. | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.29.2.5.1.1.2 |
| auxRamanIfPump1WantedPower The wanted power of the higher pump.
Used for manual configuration. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.20 |
| auxRamanIfPump1ActualPower The actual power of the higher pump. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.21 |
| auxRamanIfPump1Current The current of the higher pump. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.22 |
| auxRamanIfPump1Temperature The temperature of the higher pump. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.23 |
| auxRamanIfPump2WantedPower The wanted power of the higher pump.
Used for manual configuration. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.24 |
| auxRamanIfPump2ActualPower The actual power of the higher pump. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.25 |
| auxRamanIfPump2Current The current of the higher pump. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.26 |
| auxRamanIfPump2Temperature The temperature of the higher pump. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.27 |
| auxRamanIfWantedGain The wanted gain.
Used in gain-mode. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.28 |
| auxRamanIfActualGain The actual gain.
Used in gain-mode. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.29 |
| auxRamanIfDescr User configurable label. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8708.2.29.2.5.1.1.3 |
| auxRamanIfReceivedPowerLevel The received power on the line i/f. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.30 |
| auxRamanIfReflectionPowerLevel The received reflection power. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.31 |
| auxRamanIfReflectionPowerRatio The received reflection power in relation
to the power of the pumps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.32 |
| auxRamanIf1510BandReceivedPowerLevel The received power in the 1510 band. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.33 |
| auxRamanIfOscReceivedPowerLevel The received power of the OSC channel. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.34 |
| auxRamanIfAPRState Shows the state of the Automatic
Power Reduction procedure | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.35 |
| auxRamanIfOscDitherState Shows the dithering state of the
Optical Supervisiory Channel. | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.36 |
| auxRamanIfLineLossOfSignal The input line signal is lost. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.37 |
| auxRamanIfOscDitherLos The dithering of the OSC channel is lost. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.38 |
| auxRamanIfHighBackReflection High back-reflection power detected. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.39 |
| auxRamanIfSubrack The number of the subrack where the interface
is located. | column | LUM-TCSubrackNumber | .1.3.6.1.4.1.8708.2.29.2.5.1.1.4 |
| auxRamanIfHighLineOutputPower High line output power is detected.
The power is decreased not to exceed
the maximum power | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.40 |
| auxRamanIfLowLineOutputPower Low output power is detected. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.41 |
| auxRamanIfModuleTempTooHigh Too high ambient temperature of the amplifier
module causing shut down. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.42 |
| auxRamanIfModuleTempHigh High ambient temperature of the amplifier module.
Crossed warning threshold | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.43 |
| auxRamanIfPumpsTempTooHigh Too high temperature of the pumps causing
shut down. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.44 |
| auxRamanIfPumpsTempHigh High temperature of the pumps.
Crossed warning threshold. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.45 |
| auxRamanIfAprShutdown Shows if the pumps have been shutdown
according to any of the APR or ALS
schemes. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.46 |
| auxRamanIfLineFiberDeteriorated The quality of the line fiber has
changed (deteriorated). | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.47 |
| auxRamanIf1510BandPowerLos The power of the 1510 band has been lost. | column | LUM-TCFaultStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.48 |
| auxRamanIfManualRestartTrial Executing this procedure initiates a manual
restart trial. | column | LUM-TCCommandString | .1.3.6.1.4.1.8708.2.29.2.5.1.1.49 |
| auxRamanIfSlot The number of the slot where the interface is
located. | column | LUM-TCSlotNumber | .1.3.6.1.4.1.8708.2.29.2.5.1.1.5 |
| auxRamanIfModuleTemp Shows the ambient temperature of the
amplifier module. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.50 |
| auxRamanIfTxSignalStatus The operational state for outgoing (TX) signal
of the interface.
down - A fault that would lead to a protection
switch has occurred.
degraded - The s… | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.51 |
| auxRamanIfRxSignalStatus The operational state for incoming (RX) signal
of the interface.
down - A major fault has occurred
degraded - The signal quality is impaired.
… | column | Enumeration | .1.3.6.1.4.1.8708.2.29.2.5.1.1.52 |
| auxRamanIfTxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.29.2.5.1.1.6 |
| auxRamanIfRxPort The number of the port where the interface is
located. | column | LUM-TCPortNumber | .1.3.6.1.4.1.8708.2.29.2.5.1.1.7 |
| auxRamanIfInvPhysIndexOrZero The row in the invPhysTable for this interface.
Set to 0 if not known. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.29.2.5.1.1.8 |
| auxRamanIfAdminStatus The administrative state for the interface.
down - The interface should be inactive.
service - The interface is activated but alarms
are suppressed. … | column | LUM-TCBoardOrInterfaceAdminStatus | .1.3.6.1.4.1.8708.2.29.2.5.1.1.9 |