auxRamanIfHighLineOutputPower

LUM-AUX-MIB · .1.3.6.1.4.1.8708.2.29.2.5.1.1.40
MIB view Table view

Object

column LUM-TCFaultStatus 
High line output power is detected.
The power is decreased not to exceed
the maximum power

Context

MIB
LUM-AUX-MIB
OID
.1.3.6.1.4.1.8708.2.29.2.5.1.1.40
Type
column
Access
readonly
Status
current
Parent
auxRamanIfEntry
Table
auxRamanIfTable
Siblings
51

Syntax

LUM-TCFaultStatus
Source
LUM-TCFaultStatus
Base type
Enumeration

Values & Constraints

Type Values
1ok
2alarm

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
auxRamanIfIndex
An arbitrary index assigned to each configuration equipment.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.1
auxRamanIfOperStatus
The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preven…
columnLUM-TCBoardOrInterfaceOperStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.10
auxRamanIfObjectProperty
Property mask.
columnLUM-TCObjectProperty.1.3.6.1.4.1.8708.2.29.2.5.1.1.11
auxRamanIfModuleOperationMode
Module operational mode.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.12
auxRamanIfPumpsOperationMode
Pumps operational mode.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.13
auxRamanIfPumpsOperationModeConfig
Configure pumps operational mode.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.29.2.5.1.1.14
auxRamanIfLineFiberType
Line fiber type (for adaptive gain flattening).
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.15
auxRamanIfAutoRestartProcTime
Automatic Restart Procedure restart time.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.16
auxRamanIfArpPauseStatus
Shows whether the Raman amplifier is in Automatic Restart Procedure restart state.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.17
auxRamanIfPumpsStatus
Shows whether the pumps are active or not.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.18
auxRamanIfTotalPumpsPower
The total power of the pumps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.19
auxRamanIfName
The name of the FxIf.
columnLUM-TCMgmtNameString.1.3.6.1.4.1.8708.2.29.2.5.1.1.2
auxRamanIfPump1WantedPower
The wanted power of the higher pump. Used for manual configuration.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.20
auxRamanIfPump1ActualPower
The actual power of the higher pump.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.21
auxRamanIfPump1Current
The current of the higher pump.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.22
auxRamanIfPump1Temperature
The temperature of the higher pump.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.23
auxRamanIfPump2WantedPower
The wanted power of the higher pump. Used for manual configuration.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.24
auxRamanIfPump2ActualPower
The actual power of the higher pump.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.25
auxRamanIfPump2Current
The current of the higher pump.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.26
auxRamanIfPump2Temperature
The temperature of the higher pump.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.27
auxRamanIfWantedGain
The wanted gain. Used in gain-mode.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.28
auxRamanIfActualGain
The actual gain. Used in gain-mode.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.29
auxRamanIfDescr
User configurable label.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.8708.2.29.2.5.1.1.3
auxRamanIfReceivedPowerLevel
The received power on the line i/f.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.30
auxRamanIfReflectionPowerLevel
The received reflection power.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.31
auxRamanIfReflectionPowerRatio
The received reflection power in relation to the power of the pumps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.32
auxRamanIf1510BandReceivedPowerLevel
The received power in the 1510 band.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.33
auxRamanIfOscReceivedPowerLevel
The received power of the OSC channel.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.34
auxRamanIfAPRState
Shows the state of the Automatic Power Reduction procedure
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.35
auxRamanIfOscDitherState
Shows the dithering state of the Optical Supervisiory Channel.
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.36
auxRamanIfLineLossOfSignal
The input line signal is lost.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.37
auxRamanIfOscDitherLos
The dithering of the OSC channel is lost.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.38
auxRamanIfHighBackReflection
High back-reflection power detected.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.39
auxRamanIfSubrack
The number of the subrack where the interface is located.
columnLUM-TCSubrackNumber.1.3.6.1.4.1.8708.2.29.2.5.1.1.4
auxRamanIfLowLineOutputPower
Low output power is detected.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.41
auxRamanIfModuleTempTooHigh
Too high ambient temperature of the amplifier module causing shut down.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.42
auxRamanIfModuleTempHigh
High ambient temperature of the amplifier module. Crossed warning threshold
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.43
auxRamanIfPumpsTempTooHigh
Too high temperature of the pumps causing shut down.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.44
auxRamanIfPumpsTempHigh
High temperature of the pumps. Crossed warning threshold.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.45
auxRamanIfAprShutdown
Shows if the pumps have been shutdown according to any of the APR or ALS schemes.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.46
auxRamanIfLineFiberDeteriorated
The quality of the line fiber has changed (deteriorated).
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.47
auxRamanIf1510BandPowerLos
The power of the 1510 band has been lost.
columnLUM-TCFaultStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.48
auxRamanIfManualRestartTrial
Executing this procedure initiates a manual restart trial.
columnLUM-TCCommandString.1.3.6.1.4.1.8708.2.29.2.5.1.1.49
auxRamanIfSlot
The number of the slot where the interface is located.
columnLUM-TCSlotNumber.1.3.6.1.4.1.8708.2.29.2.5.1.1.5
auxRamanIfModuleTemp
Shows the ambient temperature of the amplifier module.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.8708.2.29.2.5.1.1.50
auxRamanIfTxSignalStatus
The operational state for outgoing (TX) signal of the interface. down - A fault that would lead to a protection switch has occurred. degraded - The s…
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.51
auxRamanIfRxSignalStatus
The operational state for incoming (RX) signal of the interface. down - A major fault has occurred degraded - The signal quality is impaired. …
columnEnumeration.1.3.6.1.4.1.8708.2.29.2.5.1.1.52
auxRamanIfTxPort
The number of the port where the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.29.2.5.1.1.6
auxRamanIfRxPort
The number of the port where the interface is located.
columnLUM-TCPortNumber.1.3.6.1.4.1.8708.2.29.2.5.1.1.7
auxRamanIfInvPhysIndexOrZero
The row in the invPhysTable for this interface. Set to 0 if not known.
columnUnsigned32.1.3.6.1.4.1.8708.2.29.2.5.1.1.8
auxRamanIfAdminStatus
The administrative state for the interface. down - The interface should be inactive. service - The interface is activated but alarms are suppressed. …
columnLUM-TCBoardOrInterfaceAdminStatus.1.3.6.1.4.1.8708.2.29.2.5.1.1.9