HUAWEI-COMMTEST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

347

hwTestGroupOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.1 · 1 row entry · 5 columns

Open in standard view

Table of the test group:
It provides the number of the test group to which a shelf of the device corresponds.
It is uniquely identified by the number of the test group. Multiple shelves can share
a test board.
A test group corresponds to a test board. The number of a test group is the same as
the number of the shelf that houses the test board to which the test group corresponds.
The index of this table is hwTestGroupNo.

hwTestGroupOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.1.1

Table of the test group:
It provides the number of the test group to which a shelf of the device corresponds.
It is uniquely identified by the number of the test group. Multiple shelves can share
a test board.
A test gr…

Indexes

hwTestGroupNo

Column Syntax OID

hwTestGroupNo

Test group number. The MD5500 supports the number that ranges from 0 to 240.
The MA5100 supports the number that ranges from 0 to 4.
The MA5300 supports the number that ranges from 0 to 63.

Integer32

Constraints:
range: 0-240

.1.3.6.1.4.1.2011.6.21.1.1.1.1.1.1

hwTestBoardIfIndex

Test board IfIndex.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.1.1.2

hwTestGroupAssistIfIndex

TestGroupAssist port IfIndex.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.1.1.3

hwTestGroupAssistTelNo

Assistant telephone number.
The maximum length is 16 Octets.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.2011.6.21.1.1.1.1.1.4

hwTestGroupRowStatus

Present operation status of a row.
Options:
1. active(1), -the present operation status of the row is active
2. notInService(2), -the present operation status of the row is notInService
3. notReady(3), -th…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.21.1.1.1.1.1.5

hwLoopLineTestOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.2 · 1 row entry · 226 columns

Open in standard view

This table is used for enabling a subscriber line test and obtaining the test result
after a test is complete. The subscriber line test function can be used for obtaining
the performance information about a subscriber line, such as capacity and resistance.
Users can learn about the conditions of the line by comparing such information with
standard data.
The index of this table is ifindex.

hwLoopLineTestOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.2.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwLoopLineTestOprType

MELT operation type
Options:
1. stop(1) -stop a MELT test
2. start(2) -start a MELT test
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	stop
2	start

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.1

hwLoopLineTestVoltage

Indicates whether a voltage exists on the line under test.
Options:
1. notest(1) -the voltage does not exist on the line under test
2. test(2) -the voltage exists on the line under test
3. invalid(-1) -invalid va…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.2

hwLoopLineTestResistance

Indicates whether resistance exists on the line under test.
Options:
1. notest(1) -resistance does not exist on the line under test
2. test(2) -resistance exists on the line under test
3. invalid(-1) -invalid val…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.3

hwLoopLineTestCapacitance

Indicates whether capacitance exists on the line under test.
Options:
1. notest(1) -capacitance does not exist on the line under test
2. test(2) -capacitance exists on the line under test
3. invalid(-1) -invalid …

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.4

hwLoopLineTestLoopResistance

Indicates whether loop resistance exists on the line under test.
Options:
1. notest(1) -loop resistance does not exist on the line under test
2. test(2) -loop resistance exists on the line under test
3. invalid(-…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.5

hwLoopLineTestPoleResistance

Indicates whether pole resistance exists on the line under test.
Options:
1. notest(1) -Pole resistance does not exist on the line under test
2. test(2) -Pole resistance exists on the line under test
3. invalid(-…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.6

hwLoopLineTestBusyProcFlag

Identify whether to start a test when the line is busy. The system will excecute a corresponding
operation according to the configuration that a user specifies, for example, to cancel the test or to force to test.
Opti…

Enumerationr/w

Enumerated Values:

-1	invalid
1	busyNoTest
2	busyTest
3	busystrenTest
4	deferredTest

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.7

hwLoopLineTestStatus

Indicates the result of MELT test.
Options:
1. normal(1) -the MELT test is successful
2. testFail(2) -the MELT test fails
3. portBusy(3) -the MELT test port is busy
4. testOutOfTime(4) …

Enumeration

Enumerated Values:

-1	invalid
1	normal
2	testFail
3	portBusy
4	testOutOfTime
5	testingAbnormal
6	broadbandtesting
7	capturefail
8	notratb
9	testcanceled
10	testNotSupport
11	meltChipFaulty
12	meltChipCheckInProcess

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.8

hwLoopLineTestConclusion

MELT test conclusion, this object is for pots and combo board's port.
Options:
1. normal(1) -the test conclusion is normal
2. meetLine(2) -the test conclusion is meetLine
3. aLineMix(3…

Enumeration

Enumerated Values:

-1	invalid
1	normal
2	meetLine
3	aLineMix
4	bLineMix
5	doubleMix
6	aLineEarth
7	bLineEarth
8	doublelineearth
9	selfMix
10	abLine
11	aLineFree
12	bLineEarthFree
13	doubleLineEarthFree
14	abLineFree
15	killLine
16	noPutDownTele
17	unknow
18	selfMixinMDF
19	selfMixoutMDF
20	cutLineinMDF
21	cutLineoutMDF
30	dCvoltagePowerFeed
31	aCvoltageRinging
32	dCvoltageOffhook
33	dCvoltage
34	aCvoltage
35	abImpedance
36	baImpedance
37	agImpedance
38	bgImpedance
39	agACCurrent
41	bgACCurrent
42	abACCurrent
43	agDCCurrent
44	bgDCCurrent
45	abDCCurrent
46	loopCurrent
47	noise
91	abRFaultId
92	aRFaultId
93	bRFaultId
94	abLeakId
95	aLeakId
96	bLeakId
97	abFvacLevelH
98	aFvacLevelH
99	bFvacLevelH
100	abFvacLevelI
101	aFvacLevelI
102	bFvacLevelI
103	abFvacLevelO
104	aFvacLevelO
105	bFvacLevelO
106	abFvDcLevelH
107	aFvDcLevelH
108	bFvDcLevelH
109	abFvDcLevelI
110	aFvDcLevelI
111	bFvDcLevelI
112	abFvDcLevelO
113	aFvDcLevelO
114	bFvDcLevelO
115	fesIdPPA
116	fesIdPPAInv
117	fesId2PPA
118	fesId2PPAInv
119	etsiXdslSignature
120	fetIdEr
121	abreak
122	bbreak
123	abreakInMDF
124	bbreakInMDF
125	abreakOutMDF
126	bbreakOutMDF

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.9

hwLoopLineTestACAG

Indicates the A->ground AC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.10

hwLoopLineTestACBG

Indicates the B->ground AC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.11

hwLoopLineTestACAB

Indicates the A->B AC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.12

hwLoopLineTestDCAG

Indicates the A->ground DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.13

hwLoopLineTestDCBG

Indicates the B->ground DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.14

hwLoopLineTestDCAB

Indicates the A->B DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.15

hwLoopLineTestRAG

Indicates the A->ground insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.16

hwLoopLineTestRBG

Indicates the B->ground insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.17

hwLoopLineTestRAB

Indicates the A->B insulation resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.18

hwLoopLineTestCapAG

Indicates the A->ground capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.19

hwLoopLineTestCapBG

Indicates the B->ground capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.20

hwLoopLineTestCapAB

Indicates the A->B capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.21

hwLoopLineTestLR

Indicates the loop resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.22

hwLoopLineTestRABResPole

Indicates the A->B polarity reversal resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.23

hwLoopLineTestMSocket

Indicates the M-socket connection.
Options:
1. notconnected(1) -the M-socket is not connected
2. connected(2) -the M-socket is connected
3. aBReversed(3) -the wire A and wire B are reversed

Enumeration

Enumerated Values:

1	notconnected
2	connected
3	aBReversed

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.24

hwLoopLineTestBtssPowerProcFlag

Loop line test-BTSS line with power processing.
Options:
1. noTest(1) -not test
2. test(2) -test
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	noTest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.25

hwLoopLineTestImpedance

Loop line test-impedance.
Options:
1. notest(1) -not test
2. test(2) -test

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.26

hwLoopLineTestImpedanceAB

A->B impedance (unit: ohm)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.27

hwLoopLineTestImpedanceBA

B->A impedance (unit: ohm)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.28

hwLoopLineTestImpedanceAG

A->ground impedance (unit: ohm)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.29

hwLoopLineTestImpedanceBG

B->ground impedance (unit: ohm)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.30

hwLoopLineTestCurrent

Loop line test-current.
Options:
1. notest(1) -not test
2. test(2) -test

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.31

hwLoopLineTestACCurrentAG

A->ground AC current (unit: mA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.32

hwLoopLineTestACCurrentBG

B->ground AC current (unit: mA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.33

hwLoopLineTestACCurrentAB

AB AC current (unit: mA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.34

hwLoopLineTestDCCurrentAG

A->ground DC current (unit: mA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.35

hwLoopLineTestDCCurrentBG

B->ground DC current (unit: mA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.36

hwLoopLineTestDCCurrentAB

AB DC current (unit: mA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.37

hwLoopLineTestLoopCurrent

Loop line test-loop current.
Options:
1. notest(1) -not test
2. test(2) -test

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.38

hwLoopLineTestLC

Loop current (unit: uA)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.39

hwLoopLineTestNoise

Loop line test-noise.
Options:
1. notest(1) -not test
2. test(2) -test

Enumerationr/w

Enumerated Values:

1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.40

hwLoopLineTestN

Noise (unit: dBm)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.41

hwLoopLineTestPPA

Indicates whether PPA exists on the line under test.
Options:
1. notest(1) -PPA does not exist on the line under test
2. test(2) -PPA exists on the line under test
3. invalid(-1) -invalid value
Default: notest(1)

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.42

hwLoopLineTestPPAResult

Indicates whether the PPA exists.
Options:
1. noexist(1) -PPA does not exist
2. exist(2) -PPA exists
3. inverseexist(3) -PPA inverse exists
4. invalid(-1) -invalid value

Enumeration

Enumerated Values:

-1	invalid
1	noexist
2	exist
3	inverseexist

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.43

hwLoopLineTestDeferredTime

Indicates the deferred time.
Unit: minute
This leaf is valid only when the value of hwLoopLineTestBusyProcFlag is DeferredTest(4).
Default: 30

Integer32r/w

Constraints:
range: -1--1
range: 1-1440

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.44

hwLoopLineTestTimeoutProc

Indicates the timeout processing.
Options:
1. notest(1) -if the deferred time times out and the port is still busy
the test will be canceled
2. test(2) -if the deferred time times out and the po…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.45

hwLoopLineTestReverse

Reverse flag (0:normal test 1:reverse test)

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.46

hwLoopLineTestUtgAcFreq

Frequency of foreign AC voltage source coupled to tip via Zbat_tip impedance.
Unit: Hz

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.47

hwLoopLineTestUrgAcFreq

Frequency of foreign AC voltage source coupled to ring via Zbat_ring impedance.
Unit:Hz

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.48

hwLoopLineTestUtrAcFreq

Frequency of foreign AC voltage source coupled to tip-ring via Zbat_tipring impedance.
Unit:Hz

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.49

hwLoopLineTestItipAc

AC foreign current on the tip wire.
Unit:uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.50

hwLoopLineTestIringAc

AC foreign current on the ring wire.
Unit:uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.51

hwLoopLineTestItipDc

DC foreign current on the tip wire.
Unit:uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.52

hwLoopLineTestIringDc

DC foreign current on the ring wire.
Unit:uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.53

hwLoopLineTestRbattip

In presence of a foreign voltage, the equivalent coupling resistance of wire A.
Unit:ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.54

hwLoopLineTestRbatring

In presence of a foreign voltage, the equivalent coupling resistance of wire B.
Unit:ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.55

hwLoopLineTestRring

Resistance in series with the ring capacitance, for example
when a ringer load or a passive R-C signature terminates the loop.
It also includes the cable resistance R line but it does not include
the 24 kohm feeding r…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.56

hwLoopLineTestCsig

Capacitance of an xDSL signal.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.57

hwLoopLineTestVzener

Zener diode threshold in the case of an off-hook phone.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.58

hwLoopLineTestRzener

DC tip-ring resistance measured in the case of an off-hook phone.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.59

hwLoopLineTestGtg

Aggregate a->ground conductance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.60

hwLoopLineTestBtg

Aggregate a->ground susceptance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.61

hwLoopLineTestGrg

Aggregate b->ground conductance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.62

hwLoopLineTestBrg

Aggregate b->ground susceptance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.63

hwLoopLineTestGtr

Aggregate a->b conductance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.64

hwLoopLineTestBtr

Aggregate a->b susceptance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.65

hwLoopLineTestSIGN

Indicates the ETSI xDSL Signature is detected or not.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.66

hwLoopLineTestACFEM

Indicates the presence of an AC foreign voltage above the threshold defined by ACFEMmin.
By reading the results of the foreign voltage test, it is possible to determine
whether the foreign electromotive force source h…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.67

hwLoopLineTestDCFEM

Indicates the presence of a DC foreign voltage above the threshold defined
by DCFEMmin. By reading the results of the foreign voltage test,
it is possible to determine whether the foreign electromotive
force source ha…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.68

hwLoopLineTestONHK

Indicates the presens of a phone in the on-hook state.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.69

hwLoopLineTestOPEN

Indicates a->b resistance exceeds the threshold.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.70

hwLoopLineTestSHORT

Indicates that the insulation resistance is small.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.71

hwLoopLineTestROH

Indicates a phone in the off-hook state.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.72

hwLoopLineTestUtgDcUp

Indicates the a->ground highest measurement DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.73

hwLoopLineTestUtgDcDown

Indicates the a->ground lowest measurement DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.74

hwLoopLineTestUrgDcUp

Indicates the b->ground highest measurement DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.75

hwLoopLineTestUrgDcDown

Indicates the b->ground lowest measurement DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.76

hwLoopLineTestUtrPos

Indicates the a->b positive measurement DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.77

hwLoopLineTestUtrNeg

Indicates the b->a measurement DC voltage.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.78

hwLoopLineTestItgDcUp

Indicates the current mapping the A-wire highest voltage for test.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.79

hwLoopLineTestItgDcDown

Indicates the current mapping the A-wire lowest voltage for test.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.80

hwLoopLineTestIrgDcUp

Indicates the current mapping the B-wire highest voltage for test.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.81

hwLoopLineTestIrgDcDown

Indicates the current mapping the B-wire lowest voltage for test.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.82

hwLoopLineTestItrPos

Indicates the current mapping the A->B positive voltage for test.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.83

hwLoopLineTestItrNeg

Indicates the current mapping the A->B negative voltage for test.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.84

hwLoopLineTestRinger

Indicates the detected ringer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.85

hwLoopLineTestPPARes

Indicates the resistance of PPA.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.86

hwLoopLineTestStartTime

Indicates the start time and date of the MELT test.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.87

hwLoopLineTestEndTime

Indicates the end time and date of the MELT test.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.88

hwLoopLineTestOprMeasuredFreq

Indicates the measured frequency for complex impedance.
Options:
1. frequency25Hz(0) -25 Hz
2. frequency275Hz(1) -275 Hz
3. invalid(-1) -invalid value
Default: frequency25Hz(0)

Enumerationr/w

Enumerated Values:

-1	invalid
0	frequency25Hz
1	frequency275Hz

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.89

hwLoopLineTestIfIndex

Port IfIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.90

hwLoopLineTestRequestID

Request ID.
The value is the fourth parameter in the trap message.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.91

hwLoopLineTestRABPole

Indicates the A->B polarity resistance.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.92

hwLoopLineTestACAGFlag

Indicates whether the value of hwLoopLineTestACAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACAG is valid
2. invalid(2) -the value of hwLoopLineTestACAG is invalid
3. notsupport(3) -the valu…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.93

hwLoopLineTestACBGFlag

Indicates whether the value of hwLoopLineTestACBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACBG is valid
2. invalid(2) -the value of hwLoopLineTestACBG is invalid
3. notsupport(3) -the value of hwL…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.94

hwLoopLineTestACABFlag

Indicates whether the value of hwLoopLineTestACAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACAB is valid
2. invalid(2) -the value of hwLoopLineTestACAB is invalid
3. notsupport(3) -the valu…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.95

hwLoopLineTestDCAGFlag

Indicates whether the value of hwLoopLineTestDCAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCAG is valid
2. invalid(2) -the value of hwLoopLineTestDCAG is invalid
3. notsupport(3) -the value…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.96

hwLoopLineTestDCBGFlag

Indicates whether the value of hwLoopLineTestDCBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCBG is valid
2. invalid(2) -the value of hwLoopLineTestDCBG is invalid
3. notsupport(3) -the valu…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.97

hwLoopLineTestDCABFlag

Indicates whether the value of hwLoopLineTestDCAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCAB is valid
2. invalid(2) -the value of hwLoopLineTestDCAB is invalid
3. notsupport(3) -the valu…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.98

hwLoopLineTestRAGFlag

Indicates whether the value of hwLoopLineTestRAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRAG is valid
2. invalid(2) -the value of hwLoopLineTestRAG is invalid
3. notsupport(3) -the value o…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.99

hwLoopLineTestRBGFlag

Indicates whether the value of hwLoopLineTestRBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRBG is valid
2. invalid(2) -the value of hwLoopLineTestRBG is invalid
3. notsupport(3) -the value o…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.100

hwLoopLineTestRABFlag

Indicates whether the value of hwLoopLineTestRAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRAB is valid
2. invalid(2) -the value of hwLoopLineTestRAB is invalid
3. notsupport(3) -the value of…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.101

hwLoopLineTestRABPoleFlag

Indicates whether the value of hwLoopLineTestRABPole is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRABPole is valid
2. invalid(2) -the value of hwLoopLineTestRABPole is invalid
3. notsupport(3) -…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.102

hwLoopLineTestRABResPoleFlag

Indicates whether the value of hwLoopLineTestRABResPole is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRABResPole is valid
2. invalid(2) -the value of hwLoopLineTestRABResPole is invalid
3. notsup…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.103

hwLoopLineTestCapAGFlag

Indicates whether the value of hwLoopLineTestCapAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapAG is valid
2. invalid(2) -the value of hwLoopLineTestCapAG is invalid
3. notsupport(3) -the v…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.104

hwLoopLineTestCapBGFlag

Indicates whether the value of hwLoopLineTestCapBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapBG is valid
2. invalid(2) -the value of hwLoopLineTestCapBG is invalid
3. notsupport(3) -the v…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.105

hwLoopLineTestCapABFlag

Indicates whether the value of hwLoopLineTestCapAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapAB is valid
2. invalid(2) -the value of hwLoopLineTestCapAB is invalid
3. notsupport(3) -the v…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.106

hwLoopLineTestRbattipFlag

Indicates whether the value of hwLoopLineTestRbattip is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRbattip is valid
2. invalid(2) -the value of hwLoopLineTestRbattip is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.107

hwLoopLineTestRbatringFlag

Indicates whether the value of hwLoopLineTestRbatring is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRbatring is valid
2. invalid(2) -the value of hwLoopLineTestRbatring is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.108

hwLoopLineTestRringFlag

Indicates whether the value of hwLoopLineTestRring is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRring is valid
2. invalid(2) -the value of hwLoopLineTestRring is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.109

hwLoopLineTestCsigFlag

Indicates whether the value of hwLoopLineTestCsig is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCsig is valid
2. invalid(2) -the value of hwLoopLineTestCsig is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.110

hwLoopLineTestPPAResFlag

Indicates whether the value of hwLoopLineTestPPARes is valid.
Options:
1. valid(1) -the value of hwLoopLineTestPPARes is valid
2. invalid(2) -the value of hwLoopLineTestPPARes is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.111

hwLoopLineTestVzenerFlag

Indicates whether the value of hwLoopLineTestVzener is valid.
Options:
1. valid(1) -the value of hwLoopLineTestVzener is valid
2. invalid(2) -the value of hwLoopLineTestVzener is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.112

hwLoopLineTestRzenerFlag

Indicates whether the value of hwLoopLineTestRzener is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRzener is valid
2. invalid(2) -the value of hwLoopLineTestRzener is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.113

hwLoopLineTestSNMPRab

Indicates the A to B resistance (insulation resistance).
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.114

hwLoopLineTestSNMPRabFlag

Indicates whether the value of hwLoopLineTestSNMPRab is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSNMPRab is valid
2. invalid(2) -the value of hwLoopLineTestSNMPRab is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.115

hwLoopLineTestSNMPRba

Indicates the B to A resistance (insulation resistance).
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.116

hwLoopLineTestSNMPRbaFlag

Indicates whether the value of hwLoopLineTestSNMPRba is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSNMPRba is valid
2. invalid(2) -the value of hwLoopLineTestSNMPRba is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.117

hwLoopLineTestPPAResultFlag

Indicates whether the value of hwLoopLineTestPPA is valid.
Options:
1. valid(1) -the value of hwLoopLineTestPPA is valid
2. invalid(2) -the value of hwLoopLineTestPPA is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.118

hwLoopLineTestUtgAcFreqFlag

Indicates whether the value of hwLoopLineTestUtgAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgAcFreq is valid
2. invalid(2) -the value of hwLoopLineTestUtgAcFreq is invalid
3. notsupport…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.119

hwLoopLineTestUrgAcFreqFlag

Indicates whether the value of hwLoopLineTestUrgAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgAcFreq is valid
2. invalid(2) -the value of hwLoopLineTestUrgAcFreq is invalid
3. notsupport…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.120

hwLoopLineTestUtrAcFreqFlag

Indicates whether the value of hwLoopLineTestUtrAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrAcFreq is valid
2. invalid(2) -the value of hwLoopLineTestUtrAcFreq is invalid
3. notsupport…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.121

hwLoopLineTestItipAcFlag

Indicates whether the value of hwLoopLineTestItipAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItipAc is valid
2. invalid(2) -the value of hwLoopLineTestItipAc is invalid
3. notsupport(3) -th…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.122

hwLoopLineTestIringAcFlag

Indicates whether the value of hwLoopLineTestIringAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIringAc is valid
2. invalid(2) -the value of hwLoopLineTestIringAc is invalid
3. notsupport(3) …

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.123

hwLoopLineTestItipDcFlag

Indicates whether the value of hwLoopLineTestItipDc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItipDc is valid
2. invalid(2) -the value of hwLoopLineTestItipDc is invalid
3. notsupport(3) -th…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.124

hwLoopLineTestIringDcFlag

Indicates whether the value of hwLoopLineTestIringDc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIringDc is valid
2. invalid(2) -the value of hwLoopLineTestIringDc is invalid
3. notsupport(3) …

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.125

hwLoopLineTestGtgFlag

Indicates whether the value of hwLoopLineTestGtg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtg is valid
2. invalid(2) -the value of hwLoopLineTestGtg is invalid
3. notsupport(3) -the value of…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.126

hwLoopLineTestBtgFlag

Indicates whether the value of hwLoopLineTestBtg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtg is valid
2. invalid(2) -the value of hwLoopLineTestBtg is invalid
3. notsupport(3) -the value o…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.127

hwLoopLineTestGrgFlag

Indicates whether the value of hwLoopLineTestGrg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGrg is valid
2. invalid(2) -the value of hwLoopLineTestGrg is invalid
3. notsupport(3) -the value of…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.128

hwLoopLineTestBrgFlag

Indicates whether the value of hwLoopLineTestBrg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBrg is valid
2. invalid(2) -the value of hwLoopLineTestBrg is invalid
3. notsupport(3) -the value o…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.129

hwLoopLineTestGtrFlag

Indicates whether the value of hwLoopLineTestGtr is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtr is valid
2. invalid(2) -the value of hwLoopLineTestGtr is invalid
3. notsupport(3) -the value o…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.130

hwLoopLineTestBtrFlag

Indicates whether the value of hwLoopLineTestBtr is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtr is valid
2. invalid(2) -the value of hwLoopLineTestBtr is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.131

hwLoopLineTestSIGNFlag

Indicates whether the value of hwLoopLineTestSIGN is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSIGN is valid
2. invalid(2) -the value of hwLoopLineTestSIGN is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.132

hwLoopLineTestACFEMFlag

Indicates whether the value of hwLoopLineTestACFEM is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACFEM is valid
2. invalid(2) -the value of hwLoopLineTestACFEM is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.133

hwLoopLineTestDCFEMFlag

Indicates whether the value of hwLoopLineTestDCFEM is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCFEM is valid
2. invalid(2) -the value of hwLoopLineTestDCFEM is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.134

hwLoopLineTestONHKFlag

Indicates whether the value of hwLoopLineTestONHK is valid.
Options:
1. valid(1) -the value of hwLoopLineTestONHK is valid
2. invalid(2) -the value of hwLoopLineTestONHK is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.135

hwLoopLineTestOPENFlag

Indicates whether the value of hwLoopLineTestOPEN is valid.
Options:
1. valid(1) -the value of hwLoopLineTestOPEN is valid
2. invalid(2) -the value of hwLoopLineTestOPEN is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.136

hwLoopLineTestSHORTFlag

Indicates whether the value of hwLoopLineTestSHORT is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSHORT is valid
2. invalid(2) -the value of hwLoopLineTestSHORT is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.137

hwLoopLineTestROHFlag

Indicates whether the value of hwLoopLineTestROH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestROH is valid
2. invalid(2) -the value of hwLoopLineTestROH is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.138

hwLoopLineTestUtgDcUpFlag

Indicates whether the value of hwLoopLineTestUtgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestUtgDcUp is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.139

hwLoopLineTestUtgDcDownFlag

Indicates whether the value of hwLoopLineTestUtgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestUtgDcDown is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.140

hwLoopLineTestUrgDcUpFlag

Indicates whether the value of hwLoopLineTestUrgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestUrgDcUp is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.141

hwLoopLineTestUrgDcDownFlag

Indicates whether the value of hwLoopLineTestUrgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestUrgDcDown is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.142

hwLoopLineTestUtrPosFlag

Indicates whether the value of hwLoopLineTestUtrPos is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrPos is valid
2. invalid(2) -the value of hwLoopLineTestUtrPos is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.143

hwLoopLineTestUtrNegFlag

Indicates whether the value of hwLoopLineTestUtrNeg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrNeg is valid
2. invalid(2) -the value of hwLoopLineTestUtrNeg is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.144

hwLoopLineTestItgDcUpFlag

Indicates whether the value of hwLoopLineTestItgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestItgDcUp is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.145

hwLoopLineTestItgDcDownFlag

Indicates whether the value of hwLoopLineTestItgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestItgDcDown is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.146

hwLoopLineTestIrgDcUpFlag

Indicates whether the value of hwLoopLineTestIrgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIrgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestIrgDcUp is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.147

hwLoopLineTestIrgDcDownFlag

Indicates whether the value of hwLoopLineTestIrgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIrgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestIrgDcDown is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.148

hwLoopLineTestItrPosFlag

Indicates whether the value of hwLoopLineTestItrPos is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItrPos is valid
2. invalid(2) -the value of hwLoopLineTestItrPos is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.149

hwLoopLineTestItrNegFlag

Indicates whether the value of hwLoopLineTestItrNeg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItrNeg is valid
2. invalid(2) -the value of hwLoopLineTestItrNeg is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.150

hwLoopLineTestRingerFlag

Indicates whether the value of hwLoopLineTestRinger is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRinger is valid
2. invalid(2) -the value of hwLoopLineTestRinger is invalid

Enumeration

Enumerated Values:

1	valid
2	invalid

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.151

hwLoopLineTestLRFlag

Indicates whether the value of hwLoopLineTestLR is valid.
Options:
1. valid(1) -the value of hwLoopLineTestLR is valid
2. invalid(2) -the value of hwLoopLineTestLR is invalid
3. notsupport(3) -the value of hw…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.152

hwLoopLineTestDcCurrent

Indicates whether DcCurrent exists on the line under test.
Options:
1. notest(1) -DcCurrent does not exist on the line under test
2. test(2) -DcCurrent exists on the line under test
3. invalid(-1) -invalid value
…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.153

hwLoopLineTestAcCurrent

Indicates whether AcCurrent exists on the line under test.
Options:
1. notest(1) -AcCurrent does not exist on the line under test
2. test(2) -AcCurrent exists on the line under test
3. invalid(-1) -invalid value
…

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.154

hwLoopLineTestConductance

Indicates whether conductance exists on the line under test.
Options:
1. notest(1) -Conductance does not exist on the line under test
2. test(2) -Conductance exists on the line under test
3. invalid(-1) -invalid …

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.155

hwLoopLineTestSusceptance

Indicates whether susceptance exists on the line under test.
Options:
1. notest(1) -Susceptance does not exist on the line under test
2. test(2) -Susceptance exists on the line under test
3. invalid(-1) -invalid …

Enumerationr/w

Enumerated Values:

-1	invalid
1	notest
2	test

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.156

hwLoopLineTestAcfrequencyA

Indicates status of Acfrequency in line A.
Options:
1. sixteenDotSix(1) -line A has ACFrequency 16.6
2. twentyFive(2) -line A has ACFrequency 25
3. fifty(3) -line A has ACFrequency 50
4. sixty(4) …

Enumeration

Enumerated Values:

-1	invalid
1	sixteenDotSix
2	twentyFive
3	fifty
4	sixty
5	unknown

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.157

hwLoopLineTestAcfrequencyB

Indicates status of Acfrequency in line A.
Options:
1. sixteenDotSix(1) -line A has ACFrequency 16.6
2. twentyFive(2) -line A has ACFrequency 25
3. fifty(3) -line A has ACFrequency 50
4. sixty(4) …

Enumeration

Enumerated Values:

-1	invalid
1	sixteenDotSix
2	twentyFive
3	fifty
4	sixty
5	unknown

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.158

hwLoopLineTestCapABH

Indicates the A->B capacitance.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.159

hwLoopLineTestCapABHFlag

Indicates whether the value of hwLoopLineTestCapABH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapABH is valid
2. invalid(2) -the value of hwLoopLineTestCapABH is invalid
3. notsupport(3) -the…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.160

hwLoopLineTestGtrH

Indicates the A->B conductance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.161

hwLoopLineTestGtrHFlag

Indicates whether the value of hwLoopLineTestGtrH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtrH is valid
2. invalid(2) -the value of hwLoopLineTestGtrH is invalid
3. notsupport(3) -the value…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.162

hwLoopLineTestBtrH

Indicates the A->B susceptance.
Unit: nS

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.163

hwLoopLineTestBtrHFlag

Indicates whether the value of hwLoopLineTestBtrH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtrH is valid
2. invalid(2) -the value of hwLoopLineTestBtrH is invalid
3. notsupport(3) -the value…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.164

hwLoopLineTestABDcCurrent

Indicates the A->B Dc current.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.165

hwLoopLineTestABDcCurrentFlag

Indicates whether the value of hwLoopLineTestABDcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABDcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestABDcCurrent is invalid
3. nots…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.166

hwLoopLineTestBADcCurrent

Indicates the B->A Dc current.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.167

hwLoopLineTestBADcCurrentFlag

Indicates whether the value of hwLoopLineTestBADcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBADcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestBADcCurrent is invalid
3. nots…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.168

hwLoopLineTestABAcCurrent

Indicates the A->B Ac current.
Unit: uArms

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.169

hwLoopLineTestABAcCurrentFlag

Indicates whether the value of hwLoopLineTestABAcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABAcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestABAcCurrent is invalid
3. nots…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.170

hwLoopLineTestBAAcCurrent

Indicates the B->A Ac current.
Unit: uArms

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.171

hwLoopLineTestBAAcCurrentFlag

Indicates whether the value of hwLoopLineTestBAAcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBAAcCurrent is valid
2. invalid(2) -the value of hwLoopLineTestBAAcCurrent is invalid
3. nots…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.172

hwLoopLineTestCSfrequencyForTest

Indicates the frequency for test capacitance and conductance.
Unit: Hz

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.173

hwLoopLineTestCSfrequencyForTestFlag

Indicates whether the value of hwLoopLineTestCSfrequencyForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCSfrequencyForTest is valid
2. invalid(2) -the value of hwLoopLineTestCSfrequencyForTe…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.174

hwLoopLineTestImpedanceForTest

Indicates the resistance inputed in test abnormal voltage.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.175

hwLoopLineTestImpedanceForTestFlag

Indicates whether the value of hwLoopLineTestImpedanceForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestImpedanceForTest is valid
2. invalid(2) -the value of hwLoopLineTestImpedanceForTest is …

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.176

hwLoopLineTestMaxVForSignature

Indicates the maximum voltage for signature.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.177

hwLoopLineTestMaxVForSignatureFlag

Indicates whether the value of hwLoopLineTestMaxVForSignature is valid.
Options:
1. valid(1) -the value of hwLoopLineTestMaxVForSignature is valid
2. invalid(2) -the value of hwLoopLineTestMaxVForSignature is …

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.178

hwLoopLineTestAGMaxVForTest

Indicates the A->ground max voltage in testing.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.179

hwLoopLineTestAGMaxVForTestFlag

Indicates whether the value of hwLoopLineTestAGMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMaxVForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMaxVForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.180

hwLoopLineTestAGMinVForTest

Indicates the A->ground min voltage in testing.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.181

hwLoopLineTestAGMinVForTestFlag

Indicates whether the value of hwLoopLineTestAGMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMinVForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMinVForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.182

hwLoopLineTestBGMaxVForTest

Indicates the B->ground max voltage in testing.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.183

hwLoopLineTestBGMaxVForTestFlag

Indicates whether the value of hwLoopLineTestBGMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMaxVForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMaxVForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.184

hwLoopLineTestBGMinVForTest

Indicates the B->ground min voltage in testing.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.185

hwLoopLineTestBGMinVForTestFlag

Indicates whether the value of hwLoopLineTestBGMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMinVForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMinVForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.186

hwLoopLineTestABMaxVForTest

Indicates the A->B max voltage in testing.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.187

hwLoopLineTestABMaxVForTestFlag

Indicates whether the value of hwLoopLineTestABMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxVForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMaxVForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.188

hwLoopLineTestABMinVForTest

Indicates the A->ground min voltage in testing.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.189

hwLoopLineTestABMinVForTestFlag

Indicates whether the value of hwLoopLineTestABMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMinVForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMinVForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.190

hwLoopLineTestAGMaxCForTest

Indicates the A->ground max current.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.191

hwLoopLineTestAGMaxCForTestFlag

Indicates whether the value of hwLoopLineTestAGMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMaxCForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMaxCForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.192

hwLoopLineTestAGMinCForTest

Indicates the A->ground min current.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.193

hwLoopLineTestAGMinCForTestFlag

Indicates whether the value of hwLoopLineTestAGMinCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMinCForTest is valid
2. invalid(2) -the value of hwLoopLineTestAGMinCForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.194

hwLoopLineTestBGMaxCForTest

Indicates the B->ground max current.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.195

hwLoopLineTestBGMaxCForTestFlag

Indicates whether the value of hwLoopLineTestBGMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMaxCForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMaxCForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.196

hwLoopLineTestBGMinCForTest

Indicates the B->ground min current.
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.197

hwLoopLineTestBGMinCForTestFlag

Indicates whether the value of hwLoopLineTestBGMinCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMinCForTest is valid
2. invalid(2) -the value of hwLoopLineTestBGMinCForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.198

hwLoopLineTestABMaxCForTest

Indicates the A->B max current
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.199

hwLoopLineTestABMaxCForTestFlag

Indicates whether the value of hwLoopLineTestABMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxCForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMaxCForTest is invalid
3…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.200

hwLoopLineTestABMaxNegCForTest

Indicates the A->ground min current
Unit: uA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.201

hwLoopLineTestABMaxNegCForTestFlag

Indicates whether the value of hwLoopLineTestABMaxNegCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxNegCForTest is valid
2. invalid(2) -the value of hwLoopLineTestABMaxNegCForTest is …

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.202

hwLoopLineTestLineALength

Indicates length of line A
Unit: m

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.203

hwLoopLineTestLineBLength

Indicates length of line B
Unit: m

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.204

hwLoopLineTestTermimalConcusion

Indicates Termimal Concusion
Options:
1. noPhone(1) -the TermimalConcusion is not connect Phone
2. offHook(2) -the TermimalConcusion is connect phone and offhook
3. eTSIxDSLsi…

Enumeration

Enumerated Values:

-1	invalid
1	noPhone
2	offHook
3	eTSIxDSLsignature
4	abMixed
5	rcNetWork
6	elecRing
7	other
8	abMixInMDF
9	abMixOutMDF

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.205

hwLoopLineTestMoreDataFlag

Indicates is there more data
Options:
1. more(1) -Indicates there is more data needs report,but needs a SNMP-GET oper. to get other data.
2. invalid(-1) -Indicates the value is invalid

Enumeration

Enumerated Values:

-1	invalid
1	more

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.206

hwLoopLineTestCtrLV

Aggregate tip-ring capacitance: CtrLV = Cco + Ctr + Cring, measured by means of low voltage ramps,
such that it does NOT include the capacitance Csig whenever the ETSI Signature terminates the subscriber loop.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.207

hwLoopLineTestCtrLVFlag

Indicates whether the value of hwLoopLineTestCtrLV is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrLV is valid
2. invalid(2) -the value of hwLoopLineTestCtrLV is invalid
3. notsupport(3) -the v…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.208

hwLoopLineTestCtrHV

Aggregate tip-ring capacitance: CtrHV = Cco + Ctr + Cring + Csig, measured by means of high voltage ramps.
It includes the capacitance Csig of an ETSI Signature whenever connected to the tip and ring wires.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.209

hwLoopLineTestCtrHVFlag

Indicates whether the value of hwLoopLineTestCtrHV is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrHV is valid
2. invalid(2) -the value of hwLoopLineTestCtrHV is invalid
3. notsupport(3) -the v…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.210

hwLoopLineTestCtrAc

Aggregate tip-ring capacitance: CtrAc = Cco + Ctr + Cring, measured by means of a low amplitude
AC signal (either 25 Hz or 275 Hz). It does NOT include Csig.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.211

hwLoopLineTestCtrAcFlag

Indicates whether the value of hwLoopLineTestCtrAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrAc is valid
2. invalid(2) -the value of hwLoopLineTestCtrAc is invalid
3. notsupport(3) -the v…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.212

hwLoopLineTestRtgSer

Resistance in series with Ctg, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.213

hwLoopLineTestRtgSerFlag

Indicates whether the value of hwLoopLineTestRtgSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRtgSer is valid
2. invalid(2) -the value of hwLoopLineTestRtgSer is invalid
3. notsupport(3) -th…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.214

hwLoopLineTestRrgSer

Resistance in series with Crg, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.215

hwLoopLineTestRrgSerFlag

Indicates whether the value of hwLoopLineTestRrgSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRrgSer is valid
2. invalid(2) -the value of hwLoopLineTestRrgSer is invalid
3. notsupport(3) -th…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.216

hwLoopLineTestRtrSer

Resistance in series with Ctring, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.217

hwLoopLineTestRtrSerFlag

Indicates whether the value of hwLoopLineTestRtrSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRtrSer is valid
2. invalid(2) -the value of hwLoopLineTestRtrSer is invalid
3. notsupport(3) -th…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.218

hwLoopLineTestUtgAcAdmit

Amplitude of the AC signal (either 25 Hz or 275 Hz) applied to the tipground admittance Ytg = Gtg + i * Btg.
Unit: V

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.219

hwLoopLineTestUtgAcAdmitFlag

Indicates whether the value of hwLoopLineTestUtgAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgAcAdmit is valid
2. invalid(2) -the value of hwLoopLineTestUtgAcAdmit is invalid
3. notsup…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.220

hwLoopLineTestUrgAcAdmit

Amplitude of the AC signal (either 25 Hz or 275 Hz) applied to the ringground admittance Yrg = Grg + i * Brg.
Unit: V

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.221

hwLoopLineTestUrgAcAdmitFlag

Indicates whether the value of hwLoopLineTestUrgAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgAcAdmit is valid
2. invalid(2) -the value of hwLoopLineTestUrgAcAdmit is invalid
3. notsup…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.222

hwLoopLineTestUtrAcAdmit

Amplitude of the AC signal (either 25 Hz or 275 Hz) applied to the tip-ring admittance Ytr = Gtr + i * Btr.
Unit: V

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.223

hwLoopLineTestUtrAcAdmitFlag

Indicates whether the value of hwLoopLineTestUtrAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrAcAdmit is valid
2. invalid(2) -the value of hwLoopLineTestUtrAcAdmit is invalid
3. notsup…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.224

hwLoopLineTestCapterminal

A capacitive termination of the access line shall be identified by the capacitance measurement and the associated evaluation.
The following average value for the capacitance Cabk of the measured cable can be assumed:
Ca…

Enumeration

Enumerated Values:

1	noexist
2	exist

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.225

hwLoopLineTestCapterminalFlag

Indicates whether the value of hwLoopLineTestCapterminal is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapterminal is valid
2. invalid(2) -the value of hwLoopLineTestCapterminal is invalid
3. not…

Enumeration

Enumerated Values:

1	valid
2	invalid
3	notsupport

.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.226

hwMeterTestOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.3 · 1 row entry · 4 columns

Open in standard view

Operation table of the meter test.
It implements the meter test function in the system. The test board provides the interface connected to the external test meter such as a multimeter through the meter test function.
The index of this table is ifIndex.

hwMeterTestOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.3.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwMeterTestOprType

Operation type.
Options:
1. stop(1) -operation type is stop
2. start(2) -operation type is start

Enumerationr/w

Enumerated Values:

1	stop
2	start

.1.3.6.1.4.1.2011.6.21.1.1.1.3.1.1

hwMeterTestItem

Test items.
Options:
1. inline(1) -in test
2. outline(2) -out test

Enumerationr/w

Enumerated Values:

1	inline
2	outline

.1.3.6.1.4.1.2011.6.21.1.1.1.3.1.2

hwMeterTestStatus

Test status.
Options:
1. success(1) -no test on busy
2. fail(2) -remedy test on busy
3. portbusy(3) -forced test on busy
4. outoftime(4) -test out …

Enumeration

Enumerated Values:

1	success
2	fail
3	portbusy
4	outoftime
5	testingAbnormal
6	broadbandtesting
7	capturefail
8	notratb

.1.3.6.1.4.1.2011.6.21.1.1.1.3.1.3

hwMeterTestBusyFlag

Meter test busy flag.
Options:
1. busyNoTest(1) -no test on busy
2. busyTest(2) -test on busy
3. busystrenTest(3) -forced test on busy

Enumerationr/w

Enumerated Values:

1	busyNoTest
2	busyTest
3	busystrenTest

.1.3.6.1.4.1.2011.6.21.1.1.1.3.1.4

hwTestBoardDiagnoseTestOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.4 · 1 row entry · 13 columns

Open in standard view

Operation table of the self-test on the test board.
It implements the self-test on the test board in the system. The self-test checks whether the test board can work in the normal state.
The index of this table is ifIndex.

hwTestBoardDiagnoseTestOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.4.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwTestBoardDiagnoseTestOprType

Operation type.
Options:
1. start(2) -operation type is start

Enumerationr/w

Enumerated Values:

start

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.1

hwTestBoardDiagnoseTestResult

Self-diagnosis result.
Options:
1. selfTestOver(1) -self-diagnosis successful
2. selfTestFail(2) -self-diagnosis failure
3. testingAbnormal(3) -test abnormal

Enumeration

Enumerated Values:

1	selfTestOver
2	selfTestFail
3	testingAbnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.2

hwTestBoardDiagnoseTestRAM

System RAMRAM.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.3

hwTestBoardDiagnoseTestVoltage

Voltage.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.4

hwTestBoardDiagnoseTestResistance

Resistance.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.5

hwTestBoardDiagnoseTestSignal

Signal circuit.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.6

hwTestBoardDiagnoseTestDTMF

DTMF.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.7

hwTestBoardDiagnoseTestRing

Ringing.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.8

hwTestBoardDiagnoseTestOnOffHook

On/off hook.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.9

hwTestBoardDiagnoseTestPole

Polarity reversal.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.10

hwTestBoardDiagnoseTestISDNU

ISDN U port.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.11

hwTestBoardDiagnoseTestBitErrCode

Error code test.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.12

hwTestBoardDiagnoseTestCapacitance

Capacitance.
Options:
1. normal(1) -normal
2. abnormal(2) -abnormal

Enumeration

Enumerated Values:

1	normal
2	abnormal

.1.3.6.1.4.1.2011.6.21.1.1.1.4.1.13

hwTestBoardStatusQueryOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.5 · 1 row entry · 5 columns

Open in standard view

Operation table for querying the status of the test board.
It implements the function of querying the status of the test board in the system. You can query the current status of the test board through this function.
The index of this table is ifIndex.

hwTestBoardStatusQueryOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.5.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwTestBoardStatusQueryOprType

Operation type.
Options:
1. beginQuery(2) -start

Enumerationr/w

Enumerated Values:

2	beginQuery

.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.1

hwTestBoardStatusQueryResult

Query status.
Options:
1. querySuccess(1) -query status successful
2. queryFail(2) -query status failure

Enumeration

Enumerated Values:

1	querySuccess
2	queryFail

.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.2

hwTestBoardStatusQueryVersion

Version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.3

hwTestBoardStatusQueryTestItem

Test item.
Options:
1. testIdle(1) -idle
2. pstnUserInLineTest(2) -pstn inline test
3. userLineTest(3) -loop line test
4. phoneTest(4) …

Enumeration

Enumerated Values:

1	testIdle
2	pstnUserInLineTest
3	userLineTest
4	phoneTest
5	manTestOutLine
6	manTestInnerLine
7	halfAutoUserCircuit
8	halfAutoTssPhoneCircuit
9	tssSelfTest
10	testInnerBus
11	testOuterBus
12	digUserOutLineTest
13	digUserInnerLineTest
14	switchToStandIsdnTerminal
15	switchToIsdnSpecialcode
16	testBoarDfault
17	pstnRemoteCallTest
18	indialtest
33	coEmulate
34	cqtTest
35	cqtFRTest
36	cqtTDRTest
37	cqtDMTTest
38	cqtNSETest
39	cqtLBTest
40	cqtLCTest
61	internalcaptureTestedPort
62	externalcaptureTestedPort
63	monitorTest
64	seltTest
65	sendtoneTest
66	checktoneTest
67	autocalltest
241	anothermainboardistesting

.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4

hwTestBoardStatusTestedBoardIfIndex

Index of the tested port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.5

hwSearchingToneOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.6 · 1 row entry · 6 columns

Open in standard view

This table is used for enabling the searching tone test by setting the searching tone
test voltage level, test frequency, and test duration. The searching tone test
is to locate a specific line from various lines by transmitting pulse tones to lines.
This test helps carriers locate faults and provision services.
The index of this table is ifindex.

hwSearchingToneOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.6.1

Indexes

IF-MIBifIndex

Column Syntax OID

hwSearchingToneOprType

Searching tone test-operation type.
Options:
1. stop(1) -stop a searching tone test
2. start(2) -start a searching tone test
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	stop
2	start

.1.3.6.1.4.1.2011.6.21.1.1.1.6.1.1

hwSearchingToneLevel

Indicates the test voltage level of a searching tone test.
Options:
1. -1 -Invalid value
2. 80..500 -(XDSL Range: 80-126 MXU voice Range: 80-500)
Default: 120 -(XDSL Default: 120 MXU voice def…

Integer32r/w

Constraints:
range: -1--1
range: 80-500

.1.3.6.1.4.1.2011.6.21.1.1.1.6.1.2

hwSearchingToneFrequency

Indicates the test frequency of a searching tone test.
Default: 800
Unit: Hz

Integer32r/w

Constraints:
range: -1--1
range: 300-3400

.1.3.6.1.4.1.2011.6.21.1.1.1.6.1.3

hwSearchingToneDurationTime

Indicates the test duration of a searching tone test.
Default: 9000
Unit: 0.1s

Integer32r/w

Constraints:
range: -1--1
range: 1-54000

.1.3.6.1.4.1.2011.6.21.1.1.1.6.1.4

hwSearchingToneRemainingTime

Indicates the test remaining time of a searching tone test.
Unit: 0.1s

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.6.1.5

hwSearchingToneBusyProcFlag

Searching tone test-busy flag.
Options:
1. cancel(1) -when port is busy do not start a searching tone test
2. force(2) -when port is busy force to start a searching tone test
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	cancel
2	force

.1.3.6.1.4.1.2011.6.21.1.1.1.6.1.6

hwLoopLineTestCalibrationTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.7 · 1 row entry · 3 columns

Open in standard view

This table provides the test calibration data of a line. Before delivery,
each port is performed with a test in which no user is connected to the
port and the test result is saved as standard data. The standard data is used for
calibrating the test result of tests in the actual environment.
The index of this table is ifindex.

hwLoopLineTestCalibrationEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.7.1

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwLoopLineTestAGCalibration Indicates the test calibration data of A->Ground capacitance. Unit: nF	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.1.1.1.7.1.1`
hwLoopLineTestBGCalibration Indicates the test calibration data of B->Ground capacitance. Unit: nF	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.1.1.1.7.1.2`
hwLoopLineTestABCalibration Indicates the test calibration data of A->B capacitance. Unit: nF	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.2011.6.21.1.1.1.7.1.3`

hwLoopLineTestMeltVerTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.8 · 1 row entry · 3 columns

Open in standard view

This table provides the information about the MELT chip on the board,
including the vendor, hardware version, and software version.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwLoopLineTestMeltVerEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.8.1

This table provides the information about the MELT chip on the board,
including the vendor, hardware version, and software version.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwLoopLineTestMeltFactory MELT chipset manufacturer information Maximum length: 32 Octets	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.2011.6.21.1.1.1.8.1.1`
hwLoopLineTestMeltChip MELT chipset manufacturer hardware information Maximum length: 128 Octets	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.2011.6.21.1.1.1.8.1.2`
hwLoopLineTestMeltFirmwareVer MELT chipset manufacturer version information Maximum length: 16 Octets	OctetString Constraints: `range: 0-16`	`.1.3.6.1.4.1.2011.6.21.1.1.1.8.1.3`

hwONTPotsTestOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.10 · 1 row entry · 71 columns

Open in standard view

This table is used for enabling the POTS port line test of the ONT by setting the test
item, test frequency, and test threshold. This test helps operators locate faults and
provision services.
The indexes of this table are ifindex, hwONTPotsTestONTIndex and hwONTPotsTestONTPstnPortIndex.

hwONTPotsTestOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.10.1

Indexes

IF-MIBifIndex hwONTPotsTestONTIndex hwONTPotsTestONTPstnPortIndex

Column Syntax OID

hwONTPotsTestONTIndex

ONT ID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.1

hwONTPotsTestONTPstnPortIndex

ONT port ID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.2

hwONTPotsTestOprType

POTS port line Test-operation type.
Options:
1. stop(1) -stop a POTS port line test
2. start(2) -start a POTS port line test
3. invalid(-1) -invalid value

Enumerationr/w

Enumerated Values:

-1	invalid
1	stop
2	start

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.3

hwONTPotsTestItem

POTS port line test item.
Options:
1. allMLTTests(1) -outdoor connection test
2. hazardousPotential(2) -hazardous potential test
3. foreignEMF(3) -foreign electromotive force(EMF) te…

Enumerationr/w

Enumerated Values:

1	allMLTTests
2	hazardousPotential
3	foreignEMF
4	resistiveFaults
5	receiverOffHook
6	ringer
7	nT1DcSignatureTest
8	selfTest
9	dialToneMakeBreakTest
10	subscriberLine
11	vendorSpecificTest2
12	vendorSpecificTest3
13	vendorSpecificTest4
14	vendorSpecificTest5
15	vendorSpecificTest6
16	vendorSpecificTest7

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.4

hwONTPotsTestBusyProcFlag

Test mode when a line is busy.
Options:
1. cancel(1) -deny a test if a line is busy
2. force(2) -forced mode

Enumerationr/w

Enumerated Values:

1	cancel
2	force

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.5

hwONTPotsTestT1Threshold

Slow dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 100..6000 -Valid value range

Integer32r/w

Constraints:
range: 0-0
range: 100-6000

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.6

hwONTPotsTestT2Threshold

No dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 1000..10000 -Valid value range

Integer32r/w

Constraints:
range: 0-0
range: 1000-10000

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.7

hwONTPotsTestT3Threshold

Slow break dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 100..3000 -Valid value range

Integer32r/w

Constraints:
range: 0-0
range: 100-3000

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.8

hwONTPotsTestT4Threshold

No break dial tone threshold.
Options:
1. 0 -Invalid value. It indicates that an ONT will use its default value
2. 1000..3000 -Valid value range

Integer32r/w

Constraints:
range: 1000-3000
range: 0-0

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.9

hwONTPotsTestDtmfDigit

DTMF test number.
Options:
1. zero(1) -the test number is 0
2. one(2) -the test number is 1
3. two(3) -the test number is 2
4. three(4) -the test number is 3
5. four(5) -the test…

Enumerationr/w

Enumerated Values:

1	zero
2	one
3	two
4	three
5	four
6	five
7	six
8	seven
9	eight
10	nine
11	symbolStar
12	symbolSharp
13	default

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.10

hwONTPotsTestDialType

The dialling type of dialling tone test.
Options:
1. dtmf(1) -dtmf type
2. pulse(2) -pulse type

Enumerationr/w

Enumerated Values:

1	dtmf
2	pulse

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.11

hwONTPotsTestDialToneFreq1

The frequency1 in the dialling tone test.
0 -unused
Unit: Hz

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.12

hwONTPotsTestDialToneFreq2

The frequency2 in the dialling tone test.
0 -unused
Unit: Hz

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.13

hwONTPotsTestDialToneFreq3

The frequency3 in the dialling tone test.
0 -unused
Unit: Hz

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.14

hwONTPotsTestDialToneEnergyThreshold

The value of energy threshold in the dialling tone test.
Valid value:
1. 0x00: unspecified
2. 0x01-0xFD: -0.1 dBm0 to -25.3 dBm0
Unit: 0.1 dBm0

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.15

hwONTPotsTestIdleChannelEnergyThreshold

The value of energy threshold in the dialling tone test when the line
is in the idle state.
Valid value:
1. 0x00: unspecified
2. 0x01-0x5A: -1 dBm0 to -90 dBm0
Unit: 1 dBm0

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.16

hwONTPotsTestDCHazardousVoltThreshold

The value of DC voltage threshold in the hazardous potential test.
0x00 -unspecified
Unit: volt

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.17

hwONTPotsTestACHazardousVoltThreshold

The value of AC voltage threshold in the hazardous potential test.
0x00 -unspecified
Unit: volt.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.18

hwONTPotsTestDCForeignVoltThreshold

The value of DC voltage threshold in the foreign volt test.
0x00 -unspecified
Unit: volt

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.19

hwONTPotsTestACForeignVoltThreshold

The value of AC voltage threshold in the foreign volt test.
0x00 -unspecified
Unit: volt

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.20

hwONTPotsTestAGBGResistanceThreshold

The resistance (tip to ground, ring to ground) threshold in the
resistive faults test.
0x00 -unspecified
Unit: kilohm

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.21

hwONTPotsTestABResistanceThreshold

The resistance (tip to ring) threshold in the resistive faults test.
0x00 -unspecified
Unit: kilohm

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.22

hwONTPotsTestRingerEquivMinThreshold

Ringer equivalence minimum threshold.
0x00 -unspecified
Unit: 0.01 REN

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.23

hwONTPotsTestRingerEquivMaxThreshold

Ringer equivalence maximum threshold.
0x00 -unspecified
Unit: 0.01 REN

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.24

hwONTPotsTestMLTResult

MLT qualitative test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.25

hwONTPotsTestHazardousVoltResult

Hazardous volt test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.26

hwONTPotsTestEMFResult

EMF test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.27

hwONTPotsTestResistacneResult

Resistacne test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.28

hwONTPotsTestOffHookResult

The off-hook test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.29

hwONTPotsTestRingerResult

Ringer test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.30

hwONTPotsTestNT1DCSignalResult

NT1 DC Signal test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.31

hwONTPotsTestSelfTestResult

Self test result.
Options:
1. failed(1) -a test fails
2. passOrNotRun(2) -a test passes or the test does not run
3. notCompleted(3) -a test is not complete yet

Enumeration

Enumerated Values:

1	failed
2	passOrNotRun
3	notCompleted

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.32

hwONTPotsTestDrawDialToneResult

Draw dialling tone test result.
Options:
1. notRun(1) -a test does not run
2. couldNotDraw1(3) -a test fails to draw
3. couldNotDraw2(4) -a test fails to draw
4. slowDraw…

Enumeration

Enumerated Values:

1	notRun
3	couldNotDraw1
4	couldNotDraw2
5	slowDraw1
6	slowDraw2
7	pass1
8	pass2

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.33

hwONTPotsTestBreakDialToneResult

The break dialling tone test result.
Options:
1. notRun(1) -a test does not run
2. couldNotDraw1(3) -a test fails to draw
3. couldNotDraw2(4) -a test fails to draw …

Enumeration

Enumerated Values:

1	notRun
3	couldNotDraw1
4	couldNotDraw2
5	slowDraw1
6	slowDraw2
7	pass1
8	pass2

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.34

hwONTPotsTestQuietEnergyResult

The quiet energy test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. failMea…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.35

hwONTPotsTestDialToneEnergyResult

The dialling tone energy test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3.…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.36

hwONTPotsTestLoopDCAGVoltResult

The DC A-G (tip to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.37

hwONTPotsTestLoopDCBGVoltResult

The DC B-G (ring to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run.

2. failMeasurementNotReported(3) -a test fails
the m…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.38

hwONTPotsTestLoopACAGVoltResult

The AC A-G (tip to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.39

hwONTPotsTestLoopACBGVoltResult

The AC B-G (ring to ground) volt loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is no…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.40

hwONTPotsTestLoopResistanceAGResult

The A-G (ring to ground) resistance loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.41

hwONTPotsTestLoopResistanceBGResult

The B-G (ring to ground) resistance loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.42

hwONTPotsTestLoopResistanceABResult

The A-B (tip to ring) resistance loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is no…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.43

hwONTPotsTestLoopRingerLoadTestResult

The ringer load Loop test result.
Options:
1. notRun(1) -a test does not run
2. failMeasurementNotReported(3) -a test fails
the measurement is not reported
3. fai…

Enumeration

Enumerated Values:

1	notRun
3	failMeasurementNotReported
4	failMeasurementReported
7	passMeasurementNotReported
8	passMeasurementReported

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.44

hwONTPotsTestDrawDialToneTimeValue

The draw dial tone test result. Valid only if value of hwONTPotsTestDrawDialToneResult
is couldNotDraw2(4), slowDraw2(6) or pass2(8).
Unit: 100ms.
Step: 100ms.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.45

hwONTPotsTestBreakDialToneTimeValue

The break dial tone test result. Valid only if value of hwONTPotsTestBreakDialToneResult
is couldNotDraw2(4), slowDraw2(6) or pass2(8).
Unit: 100ms.
Step: 100 ms.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.46

hwONTPotsTestQuietEnergyValue

The quiet energy test result. Valid only if value of hwONTPotsTestQuietEnergyResult
is failMeasurementReported(4) or passMeasurementReported(8).
Values:
0-90 : 0 dBm0 to -90 dBm0
Step: 1 dBm0

Integer32

Constraints:
range: 0-90

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.47

hwONTPotsTestDialToneEnergyValue

The dial energy test result. Valid only if value of hwONTPotsTestDialToneEnergyResult
is failMeasurementReported(4) or passMeasurementReported(8).
Values:
0-255 : 0 dBm0 to -25.5 dBm0
Values above 0 dBm0 are reported as…

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.48

hwONTPotsTestLoopDCAGVoltValue

The DC A-G(Tip-ground) volt Loop test result or Subscriber line test result.
2s complement, resolution 1V. Valid only if value of hwONTPotsTestLoopDCAGVoltResult
is failMeasurementReported(4) or passMeasurementReported(…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.49

hwONTPotsTestLoopDCBGVoltValue

The DC B-G(Ring-ground) volt Loop test result or Subscriber line test result.
2s complement, resolution 1V. Valid only if value of hwONTPotsTestLoopDCBGVoltResult
is failMeasurementReported(4) or passMeasurementReported…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.50

hwONTPotsTestLoopACAGVoltValue

The AC A-G(Tip-ground) volt Loop test result or Subscriber line test result.
Valid only if value of hwONTPotsTestLoopACAGVoltResult is failMeasurementReported(4)
or passMeasurementReported(8) when loop tested.
Valid onl…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.51

hwONTPotsTestLoopACBGVoltValue

The AC B-G(Ring-ground) volt Loop test result or Subscriber line test result.
Valid only if value of hwONTPotsTestLoopACBGVoltResult is failMeasurementReported(4)
or passMeasurementReported(8) when loop tested.
Valid on…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.52

hwONTPotsTestLoopResistanceAGValue

The A-G (tip to ground) resistance loop test result or Subscriber line test result.
Unit: kilohm.
Infinite resistance: 65535.
Valid only if value of hwONTPotsTestLoopResistanceAGResult is
failMeasurementReported(4) or …

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.53

hwONTPotsTestLoopResistanceBGValue

The B-G (ring to ground) resistance loop test result or Subscriber line test result.
Unit: kilohm.
Infinite resistance: 65535.
Valid only if value of hwONTPotsTestLoopResistanceAGResult is
failMeasurementReported(4) or…

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.54

hwONTPotsTestLoopResistanceABValue

The A-B (tip to ring) resistance loop test result or Subscriber line test result.
Unit: kilohm.
Infinite resistance: 65535.
Valid only if value of hwONTPotsTestLoopResistanceAGResult is
failMeasurementReported(4) or pa…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.55

hwONTPotsTestLoopRingerLoadTestValue

The ringer load test result. Valid only if value of hwONTPotsTestLoopRingerLoadTestResult
is failMeasurementReported(4) or passMeasurementReported(8).
Unit: 0.1 REN.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.56

hwONTPotsTestSubscriberLineTestResult

The subscriber line test result.
Options:
1. normal(1) -subscriber line test normal
2. acCurrentAbnormal(12) -AC current abnormal
3. dcCurrentAbnormal(13) -DC current abn…

Enumeration

Enumerated Values:

-1	invalid
1	normal
12	acCurrentAbnormal
13	dcCurrentAbnormal
14	loopCurrentAbnormal
15	loopResistanceAbnormal
16	insulatingResistanceAbnormal
17	capacitanceAbnormal
18	impedanceAbnormal
22	insulatingNotGood
23	brokenLines
24	lineMixing
25	connectedToGround
26	abLinereversal
27	lineLeaking
28	phoneDisconnect
29	testTimeout
30	testFailed

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.57

hwONTPotsTestLoopDCABVoltValue

The DC A-B (tip-Ring) volt result of subscriber line test.
Unit: volt.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.58

hwONTPotsTestLoopACABVoltValue

The AC A-B (Tip-Ring) volt result of subscriber line test.
Unit: volt.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.59

hwONTPotsTestLoopAGCapacitanceValue

The A->G (Tip-Ground) capacitance result of subscriber line test.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.60

hwONTPotsTestLoopBGCapacitanceValue

The B->G (Ring-Ground) capacitance result of subscriber line test.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.61

hwONTPotsTestLoopABCapacitanceValue

The A->B (Tip-Ring) capacitance result of subscriber line test.
Unit: nF

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.62

hwONTPotsTestLoopDCAGVoltCompensativeValue

The DC A->G (Tip-Ground) volt compensative result of subscriber line test.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.63

hwONTPotsTestLoopDCBGVoltCompensativeValue

The DC B->G (Ring-Ground) volt compensative result of subscriber line test.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.64

hwONTPotsTestLoopDCABVoltCompensativeValue

The DC A->B (Tip-Ring) volt compensative result of subscriber line test.
Unit: mV

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.65

hwONTPotsTestLoopACAGVoltCompensativeValue

The AC A->G (Tip-Ground) volt compensative result of subscriber line test.
Unit: mVrms

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.66

hwONTPotsTestLoopACBGVoltCompensativeValue

The AC B->G (Ring-Ground) volt compensative result of subscriber line test.
Unit: mVrms

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.67

hwONTPotsTestLoopACABVoltCompensativeValue

The AC A->B (Tip-Ring) volt compensative result of subscriber line test.
Unit: mVrms

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.68

hwONTPotsTestLoopResistanceAGCompensativeValue

The A-G (tip to ground) resistance compensative result of subscriber line test.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.69

hwONTPotsTestLoopResistanceBGCompensativeValue

The B-G (Ring to ground) resistance compensative result of subscriber line test.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.70

hwONTPotsTestLoopResistanceABCompensativeValue

The A-B (tip to Ring) resistance compensative result of subscriber line test.
Unit: ohm

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.10.1.71

hwPortTestingListOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.11 · 1 row entry · 2 columns

Open in standard view

This table is used to query the ports under a test by board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwPortTestingListOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.11.1

This table is used to query the ports under a test by board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwMeltTestingPortList

List of ports under a MELT test on a board.
The result is analyzed as follow: If a bit in the bit string is set to 1, it indicates that the corresponding port is under a MELT test.
For example, if port 8 is under a MELT…

Bits

Enumerated Values:

0	port0
1	port1
2	port2
3	port3
4	port4
5	port5
6	port6
7	port7
8	port8
9	port9
10	port10
11	port11
12	port12
13	port13
14	port14
15	port15
16	port16
17	port17
18	port18
19	port19
20	port20
21	port21
22	port22
23	port23
24	port24
25	port25
26	port26
27	port27
28	port28
29	port29
30	port30
31	port31
32	port32
33	port33
34	port34
35	port35
36	port36
37	port37
38	port38
39	port39
40	port40
41	port41
42	port42
43	port43
44	port44
45	port45
46	port46
47	port47
48	port48
49	port49
50	port50
51	port51
52	port52
53	port53
54	port54
55	port55
56	port56
57	port57
58	port58
59	port59
60	port60
61	port61
62	port62
63	port63

.1.3.6.1.4.1.2011.6.21.1.1.1.11.1.1

hwSearchToneTestingPortList

List of ports under a searching tone test on a board.
The result is analyzed as follow: If a bit in the bit string is set to 1, it indicates that the corresponding port is under a searching tone test.
For example, if po…

Bits

Enumerated Values:

0	port0
1	port1
2	port2
3	port3
4	port4
5	port5
6	port6
7	port7
8	port8
9	port9
10	port10
11	port11
12	port12
13	port13
14	port14
15	port15
16	port16
17	port17
18	port18
19	port19
20	port20
21	port21
22	port22
23	port23
24	port24
25	port25
26	port26
27	port27
28	port28
29	port29
30	port30
31	port31
32	port32
33	port33
34	port34
35	port35
36	port36
37	port37
38	port38
39	port39
40	port40
41	port41
42	port42
43	port43
44	port44
45	port45
46	port46
47	port47
48	port48
49	port49
50	port50
51	port51
52	port52
53	port53
54	port54
55	port55
56	port56
57	port57
58	port58
59	port59
60	port60
61	port61
62	port62
63	port63

.1.3.6.1.4.1.2011.6.21.1.1.1.11.1.2

hwWettingCurrentOprTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.12 · 1 row entry · 4 columns

Open in standard view

This table is used for enabling the wetting current by setting the wetting current's
working voltage, maximum voltage and slope.
The index of this table is ifindex.

hwWettingCurrentOprEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.12.1

This table is used for enabling the wetting current by setting the wetting current's
working voltage, maximum voltage and slope.
The index of this entry is ifindex.

Indexes

IF-MIBifIndex

Column Syntax OID

hwWettingCurrentOprStatus

Wetting Current operation type.
Options:
1. enabled(1) -enable a wetting current port
2. disabled(2) -disable a wetting current port
3. invalid(-1) -invalid value
enabled(1) and disabled(2) options are avail…

Enumerationr/w

Enumerated Values:

-1	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.2011.6.21.1.1.1.12.1.1

hwWettingCurrentOprWorkingVoltage

Indicates the working voltage of a wetting current port.
Options:
1. -1 -Invalid value
2. 1..120 -Valid value range
Default: 90
Unit: volt

Integer32r/w

Constraints:
range: -1--1
range: 1-120

.1.3.6.1.4.1.2011.6.21.1.1.1.12.1.2

hwWettingCurrentOprMaximumVoltage

Indicates the maximum voltage of a wetting current port.
Options:
1. -1 -Invalid value
2. 1..120 -Valid value range
Default: 30
Unit: volt

Integer32r/w

Constraints:
range: -1--1
range: 1-120

.1.3.6.1.4.1.2011.6.21.1.1.1.12.1.3

hwWettingCurrentOprSlope

Indicates the slope of a wetting current port.
Options:
1. -1 -Invalid value
2. 200..20000 -Valid value range
Default: 200
Unit: volt per second

Integer32r/w

Constraints:
range: -1--1
range: 200-20000

.1.3.6.1.4.1.2011.6.21.1.1.1.12.1.4

hwLoopLineTestMeltChipStateTable

table

.1.3.6.1.4.1.2011.6.21.1.1.1.13 · 1 row entry · 5 columns

Open in standard view

This table is used for manually starting a MELT chip status check on an xDSL board, and obtaining the status of the MELT chip.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwLoopLineTestMeltChipStateEntry entry .1.3.6.1.4.1.2011.6.21.1.1.1.13.1

This table is used for manually starting a MELT chip status check on an xDSL board, and obtaining the status of the MELT chip.
The indexes of this table are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column Syntax OID

hwBoardMeltChipStateCheckConfig

Enables the melt chip status check of the board.
Options:
1. enabled(1) -Enables the melt chip status check
2. invalid(-1) -Invalid value
enabled(1) option is available in the set operation.
invalid(-1) option …

Enumerationr/w

Enumerated Values:

-1	invalid
1	enabled

.1.3.6.1.4.1.2011.6.21.1.1.1.13.1.1

hwBoardMeltChipStateCheckResult

Melt chip status check result.
Options:
1. success(1) -Melt chip status check success
2. fail(2) -Melt chip status check fail

Enumeration

Enumerated Values:

1	success
2	fail

.1.3.6.1.4.1.2011.6.21.1.1.1.13.1.2

hwPortMeltChipStateList

Lists the status of the MELT chip for xDSL port.
The result is analyzed as follow: If a bit in the bit string is set to 1, the MELT chip of a port is faulty.
For example, if the MELT chip of port 8 is faulty, the eight…

Bits

Enumerated Values:

0	port0
1	port1
2	port2
3	port3
4	port4
5	port5
6	port6
7	port7
8	port8
9	port9
10	port10
11	port11
12	port12
13	port13
14	port14
15	port15
16	port16
17	port17
18	port18
19	port19
20	port20
21	port21
22	port22
23	port23
24	port24
25	port25
26	port26
27	port27
28	port28
29	port29
30	port30
31	port31
32	port32
33	port33
34	port34
35	port35
36	port36
37	port37
38	port38
39	port39
40	port40
41	port41
42	port42
43	port43
44	port44
45	port45
46	port46
47	port47
48	port48
49	port49
50	port50
51	port51
52	port52
53	port53
54	port54
55	port55
56	port56
57	port57
58	port58
59	port59
60	port60
61	port61
62	port62
63	port63

.1.3.6.1.4.1.2011.6.21.1.1.1.13.1.3

hwBoardMeltChipStateCheckDCVolUpperLimit

Indicates the upper limit of dc-voltage for melt chip status check.
Options:
1. -60..60 -Valid value range
2. 2147483647 -Invalid value
Default: 1
Unit: volt

Integer32r/w

Constraints:
range: -60-60
range: 2147483647-2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.13.1.4

hwBoardMeltChipStateCheckDCVolLowerLimit

Indicates the lower limit of dc-voltage for melt chip status check.
Options:
1. -60..60 -Valid value range
2. 2147483647 -Invalid value
Default: -1
Unit: volt

Integer32r/w

Constraints:
range: -60-60
range: 2147483647-2147483647

.1.3.6.1.4.1.2011.6.21.1.1.1.13.1.5