hwTestBoardStatusQueryTestItem
HUAWEI-COMMTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4
Object
column
Enumeration
Test item.
Options:
1. testIdle(1) -idle
2. pstnUserInLineTest(2) -pstn inline test
3. userLineTest(3) -loop line test
4. phoneTest(4) -telephone test
5. manTestOutLine(5) -manual test outline
6. manTestInnerLine(6) -manual test inline
7. halfAutoUserCircuit(7) -half auto tss user circuit
-meter interface
8. halfAutoTssPhoneCircuit(8) -half auto tss telephone circuit
-meter interface
9. tssSelfTest(9) -Tss self test
10. testInnerBus(10) -test inline bus test
11. testOuterBus(11) -test outline bus test
12. digUserOutLineTest(12) -isdn outline test
13. digUserInnerLineTest(13) -isdn inline test
14. switchToStandIsdnTerminal(14) -switch to standard isdn terminal
15. switchToIsdnSpecialcode(15) -switch to isdn special service telephone number
16. testBoarDfault(16) -test board fault
17. pstnRemoteCallTest(17) -pstn user remote call test
18. indialtest(18) -in-dial test
19. coEmulate(33) -CO simulation test
20. cqtTest(34) -CQT test
21. cqtFRTest(35) -CQT Frequency Response Measurement
22. cqtTDRTest(36) -CQT Time Domain Reflectometry Measurement
23. cqtDMTTest(37) -CQT Data Rate Prediction Measurement
24. cqtNSETest(38) -CQT Noise Measurement
25. cqtLBTest(39) -CQT Longitudinal Balance Measurement
26. cqtLCTest(40) -CQT Load Coil Detection
27. internalcaptureTestedPort(61) -Capture tested port loopline
28. externalcaptureTestedPort(62) -Capture tested port inline
29. monitorTest(63) -monitor test
30. seltTest(64) -selt test
31. sendtoneTest(65) -tone send test
32. checktoneTest(66) -tone check test
33. autocalltest(67) -auto call test
34. anothermainboardistesting(241) -another main board is testing
Context
- MIB
- HUAWEI-COMMTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.1.1.1.5.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwTestBoardStatusQueryOprEntry
- Table
- hwTestBoardStatusQueryOprTable
- Siblings
- 4
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | testIdle |
2 | pstnUserInLineTest |
3 | userLineTest |
4 | phoneTest |
5 | manTestOutLine |
6 | manTestInnerLine |
7 | halfAutoUserCircuit |
8 | halfAutoTssPhoneCircuit |
9 | tssSelfTest |
10 | testInnerBus |
11 | testOuterBus |
12 | digUserOutLineTest |
13 | digUserInnerLineTest |
14 | switchToStandIsdnTerminal |
15 | switchToIsdnSpecialcode |
16 | testBoarDfault |
17 | pstnRemoteCallTest |
18 | indialtest |
33 | coEmulate |
34 | cqtTest |
35 | cqtFRTest |
36 | cqtTDRTest |
37 | cqtDMTTest |
38 | cqtNSETest |
39 | cqtLBTest |
40 | cqtLCTest |
61 | internalcaptureTestedPort |
62 | externalcaptureTestedPort |
63 | monitorTest |
64 | seltTest |
65 | sendtoneTest |
66 | checktoneTest |
67 | autocalltest |
241 | anothermainboardistesting |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwTestBoardStatusQueryOprType Operation type.
Options:
1. beginQuery(2) -start | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.1 |
| hwTestBoardStatusQueryResult Query status.
Options:
1. querySuccess(1) -query status successful
2. queryFail(2) -query status failure | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.2 |
| hwTestBoardStatusQueryVersion Version. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.3 |
| hwTestBoardStatusTestedBoardIfIndex Index of the tested port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.5.1.5 |