hwLoopLineTestCapterminal
HUAWEI-COMMTEST-MIB ·
.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.225
Object
column
Enumeration
A capacitive termination of the access line shall be identified by the capacitance measurement and the associated evaluation. The following average value for the capacitance Cabk of the measured cable can be assumed: Cabk = 0.083(Cae + Cbe). If the measured capacitance is Cab > Cabk + 50 nF for ADSL&VDSL, or Cab > Cabk + 100 nF for SHDSL, respectively, It can be assumed that a terminal device with a significant self-capacitance is connected to the line. The cable-factor 0.083 is determined by hwLoopLineTestSysConfigCableFactor. Options: 1. noexist(1) -Significant terminal device capacitance is not detected 2. exist(2) -Significant terminal device capacitance is detected
Context
- MIB
- HUAWEI-COMMTEST-MIB
- OID
.1.3.6.1.4.1.2011.6.21.1.1.1.2.1.225- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwLoopLineTestOprEntry
- Table
- hwLoopLineTestOprTable
- Siblings
- 225
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noexist |
2 | exist |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwLoopLineTestOprType MELT operation type
Options:
1. stop(1) -stop a MELT test
2. start(2) -start a MELT test
3. invalid(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.1 |
| hwLoopLineTestACAG Indicates the A->ground AC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.10 |
| hwLoopLineTestRBGFlag Indicates whether the value of hwLoopLineTestRBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRBG is valid
2. invalid(2) -the value of hwLoopLineTestRBG i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.100 |
| hwLoopLineTestRABFlag Indicates whether the value of hwLoopLineTestRAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRAB is valid
2. invalid(2) -the value of hwLoopLineTestRAB is… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.101 |
| hwLoopLineTestRABPoleFlag Indicates whether the value of hwLoopLineTestRABPole is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRABPole is valid
2. invalid(2) -the value of hwLoopLineTe… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.102 |
| hwLoopLineTestRABResPoleFlag Indicates whether the value of hwLoopLineTestRABResPole is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRABResPole is valid
2. invalid(2) -the value of hwLoo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.103 |
| hwLoopLineTestCapAGFlag Indicates whether the value of hwLoopLineTestCapAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapAG is valid
2. invalid(2) -the value of hwLoopLineTestC… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.104 |
| hwLoopLineTestCapBGFlag Indicates whether the value of hwLoopLineTestCapBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapBG is valid
2. invalid(2) -the value of hwLoopLineTestC… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.105 |
| hwLoopLineTestCapABFlag Indicates whether the value of hwLoopLineTestCapAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapAB is valid
2. invalid(2) -the value of hwLoopLineTestC… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.106 |
| hwLoopLineTestRbattipFlag Indicates whether the value of hwLoopLineTestRbattip is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRbattip is valid
2. invalid(2) -the value of hwLoopLineTestRbatt… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.107 |
| hwLoopLineTestRbatringFlag Indicates whether the value of hwLoopLineTestRbatring is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRbatring is valid
2. invalid(2) -the value of hwLoopLineTestRba… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.108 |
| hwLoopLineTestRringFlag Indicates whether the value of hwLoopLineTestRring is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRring is valid
2. invalid(2) -the value of hwLoopLineTestRring is … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.109 |
| hwLoopLineTestACBG Indicates the B->ground AC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.11 |
| hwLoopLineTestCsigFlag Indicates whether the value of hwLoopLineTestCsig is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCsig is valid
2. invalid(2) -the value of hwLoopLineTestCsig is inv… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.110 |
| hwLoopLineTestPPAResFlag Indicates whether the value of hwLoopLineTestPPARes is valid.
Options:
1. valid(1) -the value of hwLoopLineTestPPARes is valid
2. invalid(2) -the value of hwLoopLineTestPPARes … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.111 |
| hwLoopLineTestVzenerFlag Indicates whether the value of hwLoopLineTestVzener is valid.
Options:
1. valid(1) -the value of hwLoopLineTestVzener is valid
2. invalid(2) -the value of hwLoopLineTestVzener … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.112 |
| hwLoopLineTestRzenerFlag Indicates whether the value of hwLoopLineTestRzener is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRzener is valid
2. invalid(2) -the value of hwLoopLineTestRzener … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.113 |
| hwLoopLineTestSNMPRab Indicates the A to B resistance (insulation resistance).
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.114 |
| hwLoopLineTestSNMPRabFlag Indicates whether the value of hwLoopLineTestSNMPRab is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSNMPRab is valid
2. invalid(2) -the value of hwLoopLineTestSNMP… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.115 |
| hwLoopLineTestSNMPRba Indicates the B to A resistance (insulation resistance).
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.116 |
| hwLoopLineTestSNMPRbaFlag Indicates whether the value of hwLoopLineTestSNMPRba is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSNMPRba is valid
2. invalid(2) -the value of hwLoopLineTestSNMPR… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.117 |
| hwLoopLineTestPPAResultFlag Indicates whether the value of hwLoopLineTestPPA is valid.
Options:
1. valid(1) -the value of hwLoopLineTestPPA is valid
2. invalid(2) -the value of hwLoopLineTestPPA is invalid | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.118 |
| hwLoopLineTestUtgAcFreqFlag Indicates whether the value of hwLoopLineTestUtgAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgAcFreq is valid
2. invalid(2) -the value of hwLoopLi… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.119 |
| hwLoopLineTestACAB Indicates the A->B AC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.12 |
| hwLoopLineTestUrgAcFreqFlag Indicates whether the value of hwLoopLineTestUrgAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgAcFreq is valid
2. invalid(2) -the value of hwLoopLi… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.120 |
| hwLoopLineTestUtrAcFreqFlag Indicates whether the value of hwLoopLineTestUtrAcFreq is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrAcFreq is valid
2. invalid(2) -the value of hwLoopLi… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.121 |
| hwLoopLineTestItipAcFlag Indicates whether the value of hwLoopLineTestItipAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItipAc is valid
2. invalid(2) -the value of hwLoopLineTes… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.122 |
| hwLoopLineTestIringAcFlag Indicates whether the value of hwLoopLineTestIringAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIringAc is valid
2. invalid(2) -the value of hwLoopLineT… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.123 |
| hwLoopLineTestItipDcFlag Indicates whether the value of hwLoopLineTestItipDc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItipDc is valid
2. invalid(2) -the value of hwLoopLineTes… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.124 |
| hwLoopLineTestIringDcFlag Indicates whether the value of hwLoopLineTestIringDc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIringDc is valid
2. invalid(2) -the value of hwLoopLineT… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.125 |
| hwLoopLineTestGtgFlag Indicates whether the value of hwLoopLineTestGtg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtg is valid
2. invalid(2) -the value of hwLoopLineTestGtg is… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.126 |
| hwLoopLineTestBtgFlag Indicates whether the value of hwLoopLineTestBtg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtg is valid
2. invalid(2) -the value of hwLoopLineTestBtg i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.127 |
| hwLoopLineTestGrgFlag Indicates whether the value of hwLoopLineTestGrg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGrg is valid
2. invalid(2) -the value of hwLoopLineTestGrg is… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.128 |
| hwLoopLineTestBrgFlag Indicates whether the value of hwLoopLineTestBrg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBrg is valid
2. invalid(2) -the value of hwLoopLineTestBrg i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.129 |
| hwLoopLineTestDCAG Indicates the A->ground DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.13 |
| hwLoopLineTestGtrFlag Indicates whether the value of hwLoopLineTestGtr is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtr is valid
2. invalid(2) -the value of hwLoopLineTestGtr i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.130 |
| hwLoopLineTestBtrFlag Indicates whether the value of hwLoopLineTestBtr is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtr is valid
2. invalid(2) -the value of hwLoopLineTestBtr is invalid | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.131 |
| hwLoopLineTestSIGNFlag Indicates whether the value of hwLoopLineTestSIGN is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSIGN is valid
2. invalid(2) -the value of hwLoopLineTestSIGN is inv… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.132 |
| hwLoopLineTestACFEMFlag Indicates whether the value of hwLoopLineTestACFEM is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACFEM is valid
2. invalid(2) -the value of hwLoopLineTestACFEM is i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.133 |
| hwLoopLineTestDCFEMFlag Indicates whether the value of hwLoopLineTestDCFEM is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCFEM is valid
2. invalid(2) -the value of hwLoopLineTestDCFEM is i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.134 |
| hwLoopLineTestONHKFlag Indicates whether the value of hwLoopLineTestONHK is valid.
Options:
1. valid(1) -the value of hwLoopLineTestONHK is valid
2. invalid(2) -the value of hwLoopLineTestONHK is inv… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.135 |
| hwLoopLineTestOPENFlag Indicates whether the value of hwLoopLineTestOPEN is valid.
Options:
1. valid(1) -the value of hwLoopLineTestOPEN is valid
2. invalid(2) -the value of hwLoopLineTestOPEN is inv… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.136 |
| hwLoopLineTestSHORTFlag Indicates whether the value of hwLoopLineTestSHORT is valid.
Options:
1. valid(1) -the value of hwLoopLineTestSHORT is valid
2. invalid(2) -the value of hwLoopLineTestSHORT is … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.137 |
| hwLoopLineTestROHFlag Indicates whether the value of hwLoopLineTestROH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestROH is valid
2. invalid(2) -the value of hwLoopLineTestROH is invalid | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.138 |
| hwLoopLineTestUtgDcUpFlag Indicates whether the value of hwLoopLineTestUtgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestUtgDc… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.139 |
| hwLoopLineTestDCBG Indicates the B->ground DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.14 |
| hwLoopLineTestUtgDcDownFlag Indicates whether the value of hwLoopLineTestUtgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestU… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.140 |
| hwLoopLineTestUrgDcUpFlag Indicates whether the value of hwLoopLineTestUrgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestUrgDcU… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.141 |
| hwLoopLineTestUrgDcDownFlag Indicates whether the value of hwLoopLineTestUrgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestUr… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.142 |
| hwLoopLineTestUtrPosFlag Indicates whether the value of hwLoopLineTestUtrPos is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrPos is valid
2. invalid(2) -the value of hwLoopLineTestUtrPos … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.143 |
| hwLoopLineTestUtrNegFlag Indicates whether the value of hwLoopLineTestUtrNeg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrNeg is valid
2. invalid(2) -the value of hwLoopLineTestUtrNeg … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.144 |
| hwLoopLineTestItgDcUpFlag Indicates whether the value of hwLoopLineTestItgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestItgDc… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.145 |
| hwLoopLineTestItgDcDownFlag Indicates whether the value of hwLoopLineTestItgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestI… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.146 |
| hwLoopLineTestIrgDcUpFlag Indicates whether the value of hwLoopLineTestIrgDcUp is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIrgDcUp is valid
2. invalid(2) -the value of hwLoopLineTestIrgDc… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.147 |
| hwLoopLineTestIrgDcDownFlag Indicates whether the value of hwLoopLineTestIrgDcDown is valid.
Options:
1. valid(1) -the value of hwLoopLineTestIrgDcDown is valid
2. invalid(2) -the value of hwLoopLineTestIr… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.148 |
| hwLoopLineTestItrPosFlag Indicates whether the value of hwLoopLineTestItrPos is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItrPos is valid
2. invalid(2) -the value of hwLoopLineTestItrPos … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.149 |
| hwLoopLineTestDCAB Indicates the A->B DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.15 |
| hwLoopLineTestItrNegFlag Indicates whether the value of hwLoopLineTestItrNeg is valid.
Options:
1. valid(1) -the value of hwLoopLineTestItrNeg is valid
2. invalid(2) -the value of hwLoopLineTestItrNeg i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.150 |
| hwLoopLineTestRingerFlag Indicates whether the value of hwLoopLineTestRinger is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRinger is valid
2. invalid(2) -the value of hwLoopLineTestRinger i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.151 |
| hwLoopLineTestLRFlag Indicates whether the value of hwLoopLineTestLR is valid.
Options:
1. valid(1) -the value of hwLoopLineTestLR is valid
2. invalid(2) -the value of hwLoopLineTestLR is in… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.152 |
| hwLoopLineTestDcCurrent Indicates whether DcCurrent exists on the line under test.
Options:
1. notest(1) -DcCurrent does not exist on the line under test
2. test(2) -DcCurrent exists on the line u… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.153 |
| hwLoopLineTestAcCurrent Indicates whether AcCurrent exists on the line under test.
Options:
1. notest(1) -AcCurrent does not exist on the line under test
2. test(2) -AcCurrent exists on the line u… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.154 |
| hwLoopLineTestConductance Indicates whether conductance exists on the line under test.
Options:
1. notest(1) -Conductance does not exist on the line under test
2. test(2) -Conductance exists on the … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.155 |
| hwLoopLineTestSusceptance Indicates whether susceptance exists on the line under test.
Options:
1. notest(1) -Susceptance does not exist on the line under test
2. test(2) -Susceptance exists on the … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.156 |
| hwLoopLineTestAcfrequencyA Indicates status of Acfrequency in line A.
Options:
1. sixteenDotSix(1) -line A has ACFrequency 16.6
2. twentyFive(2) -line A has ACFrequency 25
3. fifty(3) -line A… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.157 |
| hwLoopLineTestAcfrequencyB Indicates status of Acfrequency in line A.
Options:
1. sixteenDotSix(1) -line A has ACFrequency 16.6
2. twentyFive(2) -line A has ACFrequency 25
3. fifty(3) -line A… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.158 |
| hwLoopLineTestCapABH Indicates the A->B capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.159 |
| hwLoopLineTestRAG Indicates the A->ground insulation resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.16 |
| hwLoopLineTestCapABHFlag Indicates whether the value of hwLoopLineTestCapABH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapABH is valid
2. invalid(2) -the value of hwLoopLineTest… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.160 |
| hwLoopLineTestGtrH Indicates the A->B conductance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.161 |
| hwLoopLineTestGtrHFlag Indicates whether the value of hwLoopLineTestGtrH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestGtrH is valid
2. invalid(2) -the value of hwLoopLineTestGtrH… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.162 |
| hwLoopLineTestBtrH Indicates the A->B susceptance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.163 |
| hwLoopLineTestBtrHFlag Indicates whether the value of hwLoopLineTestBtrH is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBtrH is valid
2. invalid(2) -the value of hwLoopLineTestBtrH… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.164 |
| hwLoopLineTestABDcCurrent Indicates the A->B Dc current.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.165 |
| hwLoopLineTestABDcCurrentFlag Indicates whether the value of hwLoopLineTestABDcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABDcCurrent is valid
2. invalid(2) -the value of hwLo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.166 |
| hwLoopLineTestBADcCurrent Indicates the B->A Dc current.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.167 |
| hwLoopLineTestBADcCurrentFlag Indicates whether the value of hwLoopLineTestBADcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBADcCurrent is valid
2. invalid(2) -the value of hwLo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.168 |
| hwLoopLineTestABAcCurrent Indicates the A->B Ac current.
Unit: uArms | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.169 |
| hwLoopLineTestRBG Indicates the B->ground insulation resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.17 |
| hwLoopLineTestABAcCurrentFlag Indicates whether the value of hwLoopLineTestABAcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABAcCurrent is valid
2. invalid(2) -the value of hwLo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.170 |
| hwLoopLineTestBAAcCurrent Indicates the B->A Ac current.
Unit: uArms | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.171 |
| hwLoopLineTestBAAcCurrentFlag Indicates whether the value of hwLoopLineTestBAAcCurrent is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBAAcCurrent is valid
2. invalid(2) -the value of hwLo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.172 |
| hwLoopLineTestCSfrequencyForTest Indicates the frequency for test capacitance and conductance.
Unit: Hz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.173 |
| hwLoopLineTestCSfrequencyForTestFlag Indicates whether the value of hwLoopLineTestCSfrequencyForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCSfrequencyForTest is valid
2. invalid(2) -the… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.174 |
| hwLoopLineTestImpedanceForTest Indicates the resistance inputed in test abnormal voltage.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.175 |
| hwLoopLineTestImpedanceForTestFlag Indicates whether the value of hwLoopLineTestImpedanceForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestImpedanceForTest is valid
2. invalid(2) -the val… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.176 |
| hwLoopLineTestMaxVForSignature Indicates the maximum voltage for signature.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.177 |
| hwLoopLineTestMaxVForSignatureFlag Indicates whether the value of hwLoopLineTestMaxVForSignature is valid.
Options:
1. valid(1) -the value of hwLoopLineTestMaxVForSignature is valid
2. invalid(2) -the val… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.178 |
| hwLoopLineTestAGMaxVForTest Indicates the A->ground max voltage in testing.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.179 |
| hwLoopLineTestRAB Indicates the A->B insulation resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.18 |
| hwLoopLineTestAGMaxVForTestFlag Indicates whether the value of hwLoopLineTestAGMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMaxVForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.180 |
| hwLoopLineTestAGMinVForTest Indicates the A->ground min voltage in testing.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.181 |
| hwLoopLineTestAGMinVForTestFlag Indicates whether the value of hwLoopLineTestAGMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMinVForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.182 |
| hwLoopLineTestBGMaxVForTest Indicates the B->ground max voltage in testing.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.183 |
| hwLoopLineTestBGMaxVForTestFlag Indicates whether the value of hwLoopLineTestBGMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMaxVForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.184 |
| hwLoopLineTestBGMinVForTest Indicates the B->ground min voltage in testing.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.185 |
| hwLoopLineTestBGMinVForTestFlag Indicates whether the value of hwLoopLineTestBGMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMinVForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.186 |
| hwLoopLineTestABMaxVForTest Indicates the A->B max voltage in testing.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.187 |
| hwLoopLineTestABMaxVForTestFlag Indicates whether the value of hwLoopLineTestABMaxVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxVForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.188 |
| hwLoopLineTestABMinVForTest Indicates the A->ground min voltage in testing.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.189 |
| hwLoopLineTestCapAG Indicates the A->ground capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.19 |
| hwLoopLineTestABMinVForTestFlag Indicates whether the value of hwLoopLineTestABMinVForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMinVForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.190 |
| hwLoopLineTestAGMaxCForTest Indicates the A->ground max current.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.191 |
| hwLoopLineTestAGMaxCForTestFlag Indicates whether the value of hwLoopLineTestAGMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMaxCForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.192 |
| hwLoopLineTestAGMinCForTest Indicates the A->ground min current.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.193 |
| hwLoopLineTestAGMinCForTestFlag Indicates whether the value of hwLoopLineTestAGMinCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestAGMinCForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.194 |
| hwLoopLineTestBGMaxCForTest Indicates the B->ground max current.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.195 |
| hwLoopLineTestBGMaxCForTestFlag Indicates whether the value of hwLoopLineTestBGMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMaxCForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.196 |
| hwLoopLineTestBGMinCForTest Indicates the B->ground min current.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.197 |
| hwLoopLineTestBGMinCForTestFlag Indicates whether the value of hwLoopLineTestBGMinCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestBGMinCForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.198 |
| hwLoopLineTestABMaxCForTest Indicates the A->B max current
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.199 |
| hwLoopLineTestVoltage Indicates whether a voltage exists on the line under test.
Options:
1. notest(1) -the voltage does not exist on the line under test
2. test(2) -the voltage exists on the li… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.2 |
| hwLoopLineTestCapBG Indicates the B->ground capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.20 |
| hwLoopLineTestABMaxCForTestFlag Indicates whether the value of hwLoopLineTestABMaxCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxCForTest is valid
2. invalid(2) -the value of … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.200 |
| hwLoopLineTestABMaxNegCForTest Indicates the A->ground min current
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.201 |
| hwLoopLineTestABMaxNegCForTestFlag Indicates whether the value of hwLoopLineTestABMaxNegCForTest is valid.
Options:
1. valid(1) -the value of hwLoopLineTestABMaxNegCForTest is valid
2. invalid(2) -the val… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.202 |
| hwLoopLineTestLineALength Indicates length of line A
Unit: m | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.203 |
| hwLoopLineTestLineBLength Indicates length of line B
Unit: m | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.204 |
| hwLoopLineTestTermimalConcusion Indicates Termimal Concusion
Options:
1. noPhone(1) -the TermimalConcusion is not connect Phone
2. offHook(2) -the TermimalConcusion is… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.205 |
| hwLoopLineTestMoreDataFlag Indicates is there more data
Options:
1. more(1) -Indicates there is more data needs report,but needs a SNMP-GET oper. to get other data.
2. invalid(-1) … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.206 |
| hwLoopLineTestCtrLV Aggregate tip-ring capacitance: CtrLV = Cco + Ctr + Cring, measured by means of low voltage ramps,
such that it does NOT include the capacitance Csig whenever the ETSI Signature t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.207 |
| hwLoopLineTestCtrLVFlag Indicates whether the value of hwLoopLineTestCtrLV is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrLV is valid
2. invalid(2) -the value of hwLoopLineTestC… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.208 |
| hwLoopLineTestCtrHV Aggregate tip-ring capacitance: CtrHV = Cco + Ctr + Cring + Csig, measured by means of high voltage ramps.
It includes the capacitance Csig of an ETSI Signature whenever connected… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.209 |
| hwLoopLineTestCapAB Indicates the A->B capacitance.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.21 |
| hwLoopLineTestCtrHVFlag Indicates whether the value of hwLoopLineTestCtrHV is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrHV is valid
2. invalid(2) -the value of hwLoopLineTestC… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.210 |
| hwLoopLineTestCtrAc Aggregate tip-ring capacitance: CtrAc = Cco + Ctr + Cring, measured by means of a low amplitude
AC signal (either 25 Hz or 275 Hz). It does NOT include Csig.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.211 |
| hwLoopLineTestCtrAcFlag Indicates whether the value of hwLoopLineTestCtrAc is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCtrAc is valid
2. invalid(2) -the value of hwLoopLineTestC… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.212 |
| hwLoopLineTestRtgSer Resistance in series with Ctg, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.213 |
| hwLoopLineTestRtgSerFlag Indicates whether the value of hwLoopLineTestRtgSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRtgSer is valid
2. invalid(2) -the value of hwLoopLineTes… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.214 |
| hwLoopLineTestRrgSer Resistance in series with Crg, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.215 |
| hwLoopLineTestRrgSerFlag Indicates whether the value of hwLoopLineTestRrgSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRrgSer is valid
2. invalid(2) -the value of hwLoopLineTes… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.216 |
| hwLoopLineTestRtrSer Resistance in series with Ctring, measured at the selected AC frequency (either 25 Hz or 275 Hz)
by means of a low amplitude AC signal.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.217 |
| hwLoopLineTestRtrSerFlag Indicates whether the value of hwLoopLineTestRtrSer is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRtrSer is valid
2. invalid(2) -the value of hwLoopLineTes… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.218 |
| hwLoopLineTestUtgAcAdmit Amplitude of the AC signal (either 25 Hz or 275 Hz) applied to the tipground admittance Ytg = Gtg + i * Btg.
Unit: V | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.219 |
| hwLoopLineTestLR Indicates the loop resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.22 |
| hwLoopLineTestUtgAcAdmitFlag Indicates whether the value of hwLoopLineTestUtgAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtgAcAdmit is valid
2. invalid(2) -the value of hwLoo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.220 |
| hwLoopLineTestUrgAcAdmit Amplitude of the AC signal (either 25 Hz or 275 Hz) applied to the ringground admittance Yrg = Grg + i * Brg.
Unit: V | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.221 |
| hwLoopLineTestUrgAcAdmitFlag Indicates whether the value of hwLoopLineTestUrgAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUrgAcAdmit is valid
2. invalid(2) -the value of hwLoo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.222 |
| hwLoopLineTestUtrAcAdmit Amplitude of the AC signal (either 25 Hz or 275 Hz) applied to the tip-ring admittance Ytr = Gtr + i * Btr.
Unit: V | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.223 |
| hwLoopLineTestUtrAcAdmitFlag Indicates whether the value of hwLoopLineTestUtrAcAdmit is valid.
Options:
1. valid(1) -the value of hwLoopLineTestUtrAcAdmit is valid
2. invalid(2) -the value of hwLoo… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.224 |
| hwLoopLineTestCapterminalFlag Indicates whether the value of hwLoopLineTestCapterminal is valid.
Options:
1. valid(1) -the value of hwLoopLineTestCapterminal is valid
2. invalid(2) -the value of hwL… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.226 |
| hwLoopLineTestRABResPole Indicates the A->B polarity reversal resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.23 |
| hwLoopLineTestMSocket Indicates the M-socket connection.
Options:
1. notconnected(1) -the M-socket is not connected
2. connected(2) -the M-socket is connected
3. aBReversed(3) -the wire A and wi… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.24 |
| hwLoopLineTestBtssPowerProcFlag Loop line test-BTSS line with power processing.
Options:
1. noTest(1) -not test
2. test(2) -test
3. invalid(-1) -invalid value | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.25 |
| hwLoopLineTestImpedance Loop line test-impedance.
Options:
1. notest(1) -not test
2. test(2) -test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.26 |
| hwLoopLineTestImpedanceAB A->B impedance (unit: ohm) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.27 |
| hwLoopLineTestImpedanceBA B->A impedance (unit: ohm) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.28 |
| hwLoopLineTestImpedanceAG A->ground impedance (unit: ohm) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.29 |
| hwLoopLineTestResistance Indicates whether resistance exists on the line under test.
Options:
1. notest(1) -resistance does not exist on the line under test
2. test(2) -resistance exists on the lin… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.3 |
| hwLoopLineTestImpedanceBG B->ground impedance (unit: ohm) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.30 |
| hwLoopLineTestCurrent Loop line test-current.
Options:
1. notest(1) -not test
2. test(2) -test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.31 |
| hwLoopLineTestACCurrentAG A->ground AC current (unit: mA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.32 |
| hwLoopLineTestACCurrentBG B->ground AC current (unit: mA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.33 |
| hwLoopLineTestACCurrentAB AB AC current (unit: mA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.34 |
| hwLoopLineTestDCCurrentAG A->ground DC current (unit: mA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.35 |
| hwLoopLineTestDCCurrentBG B->ground DC current (unit: mA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.36 |
| hwLoopLineTestDCCurrentAB AB DC current (unit: mA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.37 |
| hwLoopLineTestLoopCurrent Loop line test-loop current.
Options:
1. notest(1) -not test
2. test(2) -test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.38 |
| hwLoopLineTestLC Loop current (unit: uA) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.39 |
| hwLoopLineTestCapacitance Indicates whether capacitance exists on the line under test.
Options:
1. notest(1) -capacitance does not exist on the line under test
2. test(2) -capacitance exists on the … | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.4 |
| hwLoopLineTestNoise Loop line test-noise.
Options:
1. notest(1) -not test
2. test(2) -test | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.40 |
| hwLoopLineTestN Noise (unit: dBm) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.41 |
| hwLoopLineTestPPA Indicates whether PPA exists on the line under test.
Options:
1. notest(1) -PPA does not exist on the line under test
2. test(2) -PPA exists on the line under test
3. inval… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.42 |
| hwLoopLineTestPPAResult Indicates whether the PPA exists.
Options:
1. noexist(1) -PPA does not exist
2. exist(2) -PPA exists
3. inverseexist(3) -PPA inverse exists
4. invalid(-1) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.43 |
| hwLoopLineTestDeferredTime Indicates the deferred time.
Unit: minute
This leaf is valid only when the value of hwLoopLineTestBusyProcFlag is DeferredTest(4).
Default: 30 | column | Integer32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.44 |
| hwLoopLineTestTimeoutProc Indicates the timeout processing.
Options:
1. notest(1) -if the deferred time times out and the port is still busy
the test will be canceled
2. test(2) -i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.45 |
| hwLoopLineTestReverse Reverse flag (0:normal test 1:reverse test) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.46 |
| hwLoopLineTestUtgAcFreq Frequency of foreign AC voltage source coupled to tip via Zbat_tip impedance.
Unit: Hz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.47 |
| hwLoopLineTestUrgAcFreq Frequency of foreign AC voltage source coupled to ring via Zbat_ring impedance.
Unit:Hz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.48 |
| hwLoopLineTestUtrAcFreq Frequency of foreign AC voltage source coupled to tip-ring via Zbat_tipring impedance.
Unit:Hz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.49 |
| hwLoopLineTestLoopResistance Indicates whether loop resistance exists on the line under test.
Options:
1. notest(1) -loop resistance does not exist on the line under test
2. test(2) -loop resistance ex… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.5 |
| hwLoopLineTestItipAc AC foreign current on the tip wire.
Unit:uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.50 |
| hwLoopLineTestIringAc AC foreign current on the ring wire.
Unit:uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.51 |
| hwLoopLineTestItipDc DC foreign current on the tip wire.
Unit:uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.52 |
| hwLoopLineTestIringDc DC foreign current on the ring wire.
Unit:uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.53 |
| hwLoopLineTestRbattip In presence of a foreign voltage, the equivalent coupling resistance of wire A.
Unit:ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.54 |
| hwLoopLineTestRbatring In presence of a foreign voltage, the equivalent coupling resistance of wire B.
Unit:ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.55 |
| hwLoopLineTestRring Resistance in series with the ring capacitance, for example
when a ringer load or a passive R-C signature terminates the loop.
It also includes the cable resistance R line but it… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.56 |
| hwLoopLineTestCsig Capacitance of an xDSL signal.
Unit: nF | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.57 |
| hwLoopLineTestVzener Zener diode threshold in the case of an off-hook phone.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.58 |
| hwLoopLineTestRzener DC tip-ring resistance measured in the case of an off-hook phone.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.59 |
| hwLoopLineTestPoleResistance Indicates whether pole resistance exists on the line under test.
Options:
1. notest(1) -Pole resistance does not exist on the line under test
2. test(2) -Pole resistance ex… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.6 |
| hwLoopLineTestGtg Aggregate a->ground conductance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.60 |
| hwLoopLineTestBtg Aggregate a->ground susceptance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.61 |
| hwLoopLineTestGrg Aggregate b->ground conductance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.62 |
| hwLoopLineTestBrg Aggregate b->ground susceptance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.63 |
| hwLoopLineTestGtr Aggregate a->b conductance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.64 |
| hwLoopLineTestBtr Aggregate a->b susceptance.
Unit: nS | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.65 |
| hwLoopLineTestSIGN Indicates the ETSI xDSL Signature is detected or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.66 |
| hwLoopLineTestACFEM Indicates the presence of an AC foreign voltage above the threshold defined by ACFEMmin.
By reading the results of the foreign voltage test, it is possible to determine
whether … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.67 |
| hwLoopLineTestDCFEM Indicates the presence of a DC foreign voltage above the threshold defined
by DCFEMmin. By reading the results of the foreign voltage test,
it is possible to determine whether t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.68 |
| hwLoopLineTestONHK Indicates the presens of a phone in the on-hook state. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.69 |
| hwLoopLineTestBusyProcFlag Identify whether to start a test when the line is busy. The system will excecute a corresponding
operation according to the configuration that a user specifies, for example, to c… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.7 |
| hwLoopLineTestOPEN Indicates a->b resistance exceeds the threshold. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.70 |
| hwLoopLineTestSHORT Indicates that the insulation resistance is small. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.71 |
| hwLoopLineTestROH Indicates a phone in the off-hook state. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.72 |
| hwLoopLineTestUtgDcUp Indicates the a->ground highest measurement DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.73 |
| hwLoopLineTestUtgDcDown Indicates the a->ground lowest measurement DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.74 |
| hwLoopLineTestUrgDcUp Indicates the b->ground highest measurement DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.75 |
| hwLoopLineTestUrgDcDown Indicates the b->ground lowest measurement DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.76 |
| hwLoopLineTestUtrPos Indicates the a->b positive measurement DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.77 |
| hwLoopLineTestUtrNeg Indicates the b->a measurement DC voltage.
Unit: mV | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.78 |
| hwLoopLineTestItgDcUp Indicates the current mapping the A-wire highest voltage for test.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.79 |
| hwLoopLineTestStatus Indicates the result of MELT test.
Options:
1. normal(1) -the MELT test is successful
2. testFail(2) -the MELT test fails
3. portBusy(3) -the MELT te… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.8 |
| hwLoopLineTestItgDcDown Indicates the current mapping the A-wire lowest voltage for test.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.80 |
| hwLoopLineTestIrgDcUp Indicates the current mapping the B-wire highest voltage for test.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.81 |
| hwLoopLineTestIrgDcDown Indicates the current mapping the B-wire lowest voltage for test.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.82 |
| hwLoopLineTestItrPos Indicates the current mapping the A->B positive voltage for test.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.83 |
| hwLoopLineTestItrNeg Indicates the current mapping the A->B negative voltage for test.
Unit: uA | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.84 |
| hwLoopLineTestRinger Indicates the detected ringer. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.85 |
| hwLoopLineTestPPARes Indicates the resistance of PPA.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.86 |
| hwLoopLineTestStartTime Indicates the start time and date of the MELT test. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.87 |
| hwLoopLineTestEndTime Indicates the end time and date of the MELT test. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.88 |
| hwLoopLineTestOprMeasuredFreq Indicates the measured frequency for complex impedance.
Options:
1. frequency25Hz(0) -25 Hz
2. frequency275Hz(1) -275 Hz
3. invalid(-1) -invalid value
Default: frequency2… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.89 |
| hwLoopLineTestConclusion MELT test conclusion, this object is for pots and combo board's port.
Options:
1. normal(1) -the test conclusion is normal
2. meetLine(2) -the t… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.9 |
| hwLoopLineTestIfIndex Port IfIndex. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.90 |
| hwLoopLineTestRequestID Request ID.
The value is the fourth parameter in the trap message. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.91 |
| hwLoopLineTestRABPole Indicates the A->B polarity resistance.
Unit: ohm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.92 |
| hwLoopLineTestACAGFlag Indicates whether the value of hwLoopLineTestACAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACAG is valid
2. invalid(2) -the value of hwLoopLineTestACA… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.93 |
| hwLoopLineTestACBGFlag Indicates whether the value of hwLoopLineTestACBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACBG is valid
2. invalid(2) -the value of hwLoopLineTestACBG is inv… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.94 |
| hwLoopLineTestACABFlag Indicates whether the value of hwLoopLineTestACAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestACAB is valid
2. invalid(2) -the value of hwLoopLineTestACA… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.95 |
| hwLoopLineTestDCAGFlag Indicates whether the value of hwLoopLineTestDCAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCAG is valid
2. invalid(2) -the value of hwLoopLineTestDCAG… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.96 |
| hwLoopLineTestDCBGFlag Indicates whether the value of hwLoopLineTestDCBG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCBG is valid
2. invalid(2) -the value of hwLoopLineTestDCB… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.97 |
| hwLoopLineTestDCABFlag Indicates whether the value of hwLoopLineTestDCAB is valid.
Options:
1. valid(1) -the value of hwLoopLineTestDCAB is valid
2. invalid(2) -the value of hwLoopLineTestDCA… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.98 |
| hwLoopLineTestRAGFlag Indicates whether the value of hwLoopLineTestRAG is valid.
Options:
1. valid(1) -the value of hwLoopLineTestRAG is valid
2. invalid(2) -the value of hwLoopLineTestRAG i… | column | Enumeration | .1.3.6.1.4.1.2011.6.21.1.1.1.2.1.99 |