HUAWEI-CLK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

158

hwClockInManageTable

table

.1.3.6.1.4.1.2011.6.25.1.1 · 1 row entry · 12 columns

Open in standard view

Clock Source Management Table.
This table is used to add or delete the clock source and query
the status of the clock source.
The index of this table is hwClkInIndex, which is the clock source ID.

hwClockInManageEntry entry .1.3.6.1.4.1.2011.6.25.1.1.1

Clock Source Management Table.
This table is used to add or delete the clock source and query
the status of the clock source.
The index of this entry is hwClkInIndex, which is the clock source ID.

Indexes

hwClkInIndex

Column Syntax OID

hwClkInIndex

Clock source index: ranging from 0 to 9. The value 255 indicates the local
clock source.
Range: 0-9 | 255

Integer32

Constraints:
range: 255-255
range: 0-9

.1.3.6.1.4.1.2011.6.25.1.1.1.1

hwClkInPostion

The ifIndex of physical position of clock source. If the clock source
isn't a sysline clock, the value will be 0xFFFFFFFFFFFFFF.
The first byte indicates the NO. of CESoP index.
The second byte indicates the NO. of fram…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.1.1.2

hwClkInWorkMode

Clock source type.
Includes the line clock source, BITS clock source, and local surge source.
If it is line clock source of a CES port, the clock source type may be CES line or CES SRTS clock source.
If it is BITS cloc…

Enumerationr/w

Enumerated Values:

1	none
2	sysLine
3	cesLine
4	cesSrts
5	e1Bits0
6	e1Bits1
7	f2mhzBits0
8	f2mhzBits1
9	msuSdh
10	msuTdm
11	localSurge
12	xpm8k
13	gPON
14	pkt1588
15	pw
16	copa
17	adaptClock
18	aCMClock
19	t1Bits0
20	t1Bits1
21	system
22	acr1588
23	syncEth
24	pvx2m

.1.3.6.1.4.1.2011.6.25.1.1.1.3

hwClkInOperStatus

Clock source state.
Options:
1.none(1) - indicates that the clock source index isn't configured
2.normal(2) - indicates that the state of the clock source is active
3.failure(3) - indicates that the stat…

Enumeration

Enumerated Values:

1	none
2	normal
3	failure
4	failureLoss
5	failureEFD

.1.3.6.1.4.1.2011.6.25.1.1.1.4

hwClkInRowStatus

Clock Source operation:
A user can add a clock source or clear a clock source.
After a user adds a clock source,the clock works in trace mode.
After a user clears a clock source, the clock works in srystal mode.
To set …

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.25.1.1.1.5

hwClkInBitsImpedance

BITS clock impedance type.The impedance value must be set when the clock source is a bits clock.
Options:
1. bitsImpedance75ohm(1) - indicates that the impedance of this BITS clock source is 75 ohm
2. bitsImpedan…

Enumerationr/w

Enumerated Values:

1	bitsImpedance75ohm
2	bitsImpedance120ohm
3	bitsImpedance110ohm
4	bitsImpedance100ohm
255	bitsImpedanceNone

.1.3.6.1.4.1.2011.6.25.1.1.1.6

hwClkInBitsType

BITS clock type:
Options:
1.bitsType2MHz(1) - indicates that the BITS clock type is 2MHz
2.bitsType2Mbps(2) - indicates that the BITS clock type is 2bps
3.bitsType64K(3) - indicates that the BITS cl…

Enumerationr/w

Enumerated Values:

1	bitsType2MHz
2	bitsType2Mbps
3	bitsType64K
4	bitsType1544bps
255	bitsTypeNone

.1.3.6.1.4.1.2011.6.25.1.1.1.7

hwClkInQL

Clock source quality level:
Options:
1. qlPRC(2) - indicates that primary reference clock
2. qlSsuA(4) - indicates that the clock signal comes from class I or class
V sub-clock prescribed on …

Enumerationr/w

Enumerated Values:

2	qlPRC
4	qlSsuA
8	qlSsuB
11	qlSEC
15	qlDNU
255	qlCLEAR

.1.3.6.1.4.1.2011.6.25.1.1.1.8

hwClkInFaultRecord

Clock source fault record.
Options:
1.noFaultRecord(1) - indicates that there is no fault record
2.faultRecord(2) - indicates that the clock source had a fault record

Enumeration

Enumerated Values:

1	noFaultRecord
2	faultRecord

.1.3.6.1.4.1.2011.6.25.1.1.1.9

hwClkInClearFaultRecord

Clear fault record of one clock source.
Options:
1.clearFaultRecord(1) -Clears fault records

Enumerationr/w

Enumerated Values:

1	clearFaultRecord

.1.3.6.1.4.1.2011.6.25.1.1.1.10

hwClkLockState

Clock lock state.
Options:
1.locked(1) - indicates that the clock is locked
2.unlocked(2) - indicates that the clock is unlocked

Enumeration

Enumerated Values:

1	locked
2	unlocked

.1.3.6.1.4.1.2011.6.25.1.1.1.11

hwClkFreqDeviation

Clock source freq-deviation-value
The value is ten times of actual frequency deviation value
Unit: 0.1ppm
The invalid value is 0x7fffffff

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.1.1.12

hwClockOutManageTable

table

.1.3.6.1.4.1.2011.6.25.1.2 · 1 row entry · 5 columns

Open in standard view

Clock Out Management Table.
This table is used to configure and query the priority of the clock source,
and query the index of the currently-output clock source, and the working mode (the output mode)
of the current clock.The indexes of this table are hwClkInIndex and hwClkOutIndex.
hwClkInIndex comes from hwClockInManageTable and is the index of the input clock source.
hwClkOutIndex is the type of the output clock source.
The output clock source can be of the SDH, TDM, 8K, or 19M type.

hwClockOutManageEntry entry .1.3.6.1.4.1.2011.6.25.1.2.1

Indexes

hwClkInIndex hwClkOutIndex

Column Syntax OID

hwClkOutIndex

Index of clock out table. Its meaning is the same as hwClkOutType.
The clock out index must be 8k in UA system and must be SDH or
TDM in MD/MA system during the setting of priority for a clock source.
Range: 1 - 7

Integer32

Constraints:
range: 1-7

.1.3.6.1.4.1.2011.6.25.1.2.1.1

hwClkOutType

Clock out type.
Currently, there are seven types: SDH, TDM, system, 19 MHzm, systemObsolete, external and external1.
Options:
1.sdh(1) - indicates that output clock type is SDH
2.tdm(2) -…

Enumeration

Enumerated Values:

1	sdh
2	tdm
3	system
4	clk19M
5	systemObsolete
6	external
7	external1

.1.3.6.1.4.1.2011.6.25.1.2.1.2

hwClkOutPriority

Clock source priority.
The priority ranges from 0 to 9 in a descending order. If the value is 255 in the get operation,
it indicates that the priority of the clock source isn't configured.

Integer32r/w

Constraints:
range: 255-255
range: 0-9

.1.3.6.1.4.1.2011.6.25.1.2.1.3

hwClkOutWorkMode

Clock out working mode.
Options:
1.trace(1) - indicates that the clock is working in tracing mode
2.surge(2) - indicates that the clock is working in surge mode
3.keep(3) - indicates that the clock is…

Enumeration

Enumerated Values:

1	trace
2	surge
3	keep
4	snap
5	thirdsurge

.1.3.6.1.4.1.2011.6.25.1.2.1.4

hwClkOutOperStatus

Clock source Out state. It indicates whether the clock source is
the output clock of the system: 1 indicates yes, and 2 indicates no.
Options:
1.yes(1) - indicates that the clock source is the output clock…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.2011.6.25.1.2.1.5

hwClockOutPortManageTable

table

.1.3.6.1.4.1.2011.6.25.1.4 · 1 row entry · 3 columns

Open in standard view

Clock output port management table.
This table is used to enable or disable the output
port and query the status of the output port. The index of this table is
hwClkOutputPostion, indicating the ifIndex of physical position of the clock source.

hwClockOutPortManageEntry entry .1.3.6.1.4.1.2011.6.25.1.4.1

Clock output port management table.
This table is used to enable or disable the output
port and query the status of the output port. The index of this entry is
hwClkOutputPostion, indicating the ifIndex of physical posi…

Indexes

hwClkOutputPostion

Column Syntax OID

hwClkOutputPostion

The index of physical position of the clock source.
The highest byte is useless.
The second byte describes the frame ID.
The third byte describes the slot ID.
The lowest byte describes the port ID.
The following shows h…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.4.1.1

hwClkOutPortEnable

Clock output port switch.
Options:
1. enable(0) - indicates that clock source output of this BITS port is enabled
2. disable(1) - indicates that clock source output of this BITS port is disabled

Enumerationr/w

Enumerated Values:

0	enable
1	disable

.1.3.6.1.4.1.2011.6.25.1.4.1.2

hwSsmQlOutPortEnable

SSM QL output mode.
Options:
1.enable(1) - indicates that SSM QL output of the port is enabled
2.disable(2) - indicates that SSM QL output of the port is disabled

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.25.1.4.1.3

hwClock1588ManageTable

table

.1.3.6.1.4.1.2011.6.25.1.5 · 1 row entry · 22 columns

Open in standard view

Clock 1588 source management table. This table is used to manage
the 1588 clock source.
The index of this table is hw1588ClkInIndex, which is the ID of the 1588 clock source.

hwClock1588ManageEntry entry .1.3.6.1.4.1.2011.6.25.1.5.1

Clock 1588 source management table. This table is used to manage
the 1588 clock source.
The index of this entry is hw1588ClkInIndex, which is the ID of the 1588 clock source.

Indexes

hw1588ClkInIndex

Column Syntax OID

hw1588ClkInIndex

Clock 1588 source index.
Range: 0-9

Integer32

Constraints:
range: 0-9

.1.3.6.1.4.1.2011.6.25.1.5.1.1

hw1588ClkInPostion

The index of physical position of clock 1588 source.
The highest byte is useless.
The second byte describes the frame ID.
The third byte describes the slot ID.
The lowest byte describes the port ID.
The following shows …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.5.1.2

hw1588ClkPriority

Clock 1588 source priority.
The priority ranges from 0 to 9 in a descending order.If the value is 255 in the get operation,
it indicates that the priority of the ptp source isn't configured.

Integer32r/w

Constraints:
range: 255-255
range: 0-9

.1.3.6.1.4.1.2011.6.25.1.5.1.3

hw1588ClkInOperStatus

Clock 1588 source status:
Options:
1.none(1) - indicates that the clock source index is not configured
2.normal(2) - indicates that the status of clock source is normal
3.failure(3)- indicates that the status of clock…

Enumeration

Enumerated Values:

1	none
2	normal
3	failure

.1.3.6.1.4.1.2011.6.25.1.5.1.4

hw1588ClkInRowStatus

Clock 1588 source operation includes adding and deleting clock 1588 source.
If the value is set to 4, it indicates that a clock 1588 source is created.
If the value is set to 6, it indicates that an existing clock sourc…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.25.1.5.1.5

hw1588ClkReqSendTimeInterval obsolete

1588 Req send time interval.
Options:
1.1/1024s( 1) - indicates that the time interval is 1/1024s
2.1/512s( 2) - indicates that the time interval is 1/512s
3.1/256s( 3) - indicates that the time interval is 1/256s
…

Integer32r/w

Constraints:
range: 1-21

.1.3.6.1.4.1.2011.6.25.1.5.1.6

hw1588ClkDomainNumber obsolete

1588 clock domain number:
Range: 0-255
Default: 0

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.1.5.1.7

hw1588ClkPtpPEMode obsolete

PTP MODE,default value is e2e(2).
Options:
1. p2p(1) - indicates that the 1588 clock Ptp Pe Mode is p2p
2. e2e(2) - indicates that the 1588 clock Ptp Pe Mode is e2e

Enumerationr/w

Enumerated Values:

1	p2p
2	e2e

.1.3.6.1.4.1.2011.6.25.1.5.1.8

hw1588ClkPtpMsgFormat obsolete

PTP message encapsulation format,the default value is PTPETH(1).
Options:
1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet
2. ptpip(2) - indicates that the PTP message is encapsulat…

Enumerationr/w

Enumerated Values:

1	ptpeth
2	ptpip

.1.3.6.1.4.1.2011.6.25.1.5.1.9

hw1588ClkPtpLineWarpMode obsolete

PTP line warp mode, the default value is length(1).
Options:
1. length(1) - indicates that the warp is represented by length
2. time(2) - indicates that the warp is represented by time

Enumerationr/w

Enumerated Values:

1	length
2	time

.1.3.6.1.4.1.2011.6.25.1.5.1.10

hw1588ClkPtpLineWarpDirect obsolete

PTP line warp direct, the default value is positive(1).
Options:
1. positive(1) - indicates that the warp is in the positive direction
2. negative(2) - indicates that the warp is in the negative direction

Enumerationr/w

Enumerated Values:

1	positive
2	negative

.1.3.6.1.4.1.2011.6.25.1.5.1.11

hw1588ClkPtpLineWarpValue obsolete

PTP Line Warp Value:
IF warp mode is length(1), the range is 0~14562m.
If warp mode is time(2), the range is 0~65529 ns.

Integer32r/w

Constraints:
range: 0-65529

.1.3.6.1.4.1.2011.6.25.1.5.1.12

hw1588ClkPtpTimeSourceID obsolete

PTP source port ID:
It is 10 bytes in length and the default value is 0.

OctetStringr/w

Constraints:
range: 20-20

.1.3.6.1.4.1.2011.6.25.1.5.1.13

hw1588ClkPtpVlan obsolete

PTP Vlan:
Range: 0-4094.
Default: 1.

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.2011.6.25.1.5.1.14

hw1588ClkPtpInfoMode obsolete

PTP info mode,default value is multicast(1).
Options:
1. multicast(1) - indicates that the PTP info mode is multicast.
2. unicast(2) - indicates that the PTP info mode is unicast.

Enumerationr/w

Enumerated Values:

1	muticast
2	unicast

.1.3.6.1.4.1.2011.6.25.1.5.1.15

hw1588ClkPtpAnnounceTimeout obsolete

Announce timeout:
Range: 1-1048576 ms
Range: 1 - 1048576
Default: 128 ms

Integer32r/w

Constraints:
range: 2-1048576

.1.3.6.1.4.1.2011.6.25.1.5.1.16

hw1588ClkGMClockID obsolete

Grandmaster clock ID.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.6.25.1.5.1.17

hw1588ClkAnnounceSendTimeInterval obsolete

1588 announce send time interval,the default value is 1/8s(8).
Options:
1. 1/1024s(1) - indicates that the time interval is 1/1024s
2. 1/512s (2) - indicates that the time interval is 1/512s
3. 1/256s (3) - indicate…

Integer32r/w

Constraints:
range: 1-21

.1.3.6.1.4.1.2011.6.25.1.5.1.18

hw1588ClkSyncSendTimeInterval obsolete

1588 sync send time interval,the default value is 1/8s(8).
Options:
1. 1/1024s(1) - indicates that the time interval is 1/1024s
2. 1/512s (2) - indicates that the time interval is 1/512s
3. 1/256s (3) - indicates tha…

Integer32r/w

Constraints:
range: 1-21

.1.3.6.1.4.1.2011.6.25.1.5.1.19

hw1588ClkPtpLockState

1588 port lock state.
Options:
1. locked(1) - indicates that the clock is locked
2. unlocked(2) - indicates that the clock is unlocked

Enumeration

Enumerated Values:

1	locked
2	unlocked

.1.3.6.1.4.1.2011.6.25.1.5.1.20

hw1588ClkInWorkMode

Time source type.
Options:
1. ptp(1) - indicates that time source that need to specify frame/slot/port
2. bits(2) - indicates that time source of a BITS port

Enumerationr/w

Enumerated Values:

1	ptp
2	bits

.1.3.6.1.4.1.2011.6.25.1.5.1.21

hw1588ClkInSelectStatus

Time source select status.
Options:
1. yes(1) - indicates that the time source is selected as the current time source.
2. no(2) - indicates that the time source isn't selected as the current time source.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.2011.6.25.1.5.1.22

hwClockTransManageTable

table

.1.3.6.1.4.1.2011.6.25.1.6 · 1 row entry · 5 columns

Open in standard view

Clock transaction management table.
This table is used to configure and query the clock transmission.
The index of this table is hwClkTransID, which is also the ID of
the clock transmission.

hwClockTransManageEntry entry .1.3.6.1.4.1.2011.6.25.1.6.1

Clock transaction management table.
This table is used to configure and query the clock transmission.
The index of this entry is hwClkTransID, which is also the ID of
the clock transmission.

Indexes

hwClkTransID

Column Syntax OID

hwClkTransID

Clock transaction ID: The range is from 1 to 32.
Range: 1 - 32

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.25.1.6.1.1

hwClkLocalIP

IP address of a local device

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.6.1.2

hwClkVlanTag

VLAN tag.
If the value is 0, it indicates that there is no VLAN tag in clock packages.
Range: 0 - 4095

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.2011.6.25.1.6.1.3

hwClkRemoteIP

IP address of remote device

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.6.1.4

hwClkRowStatus

Clock transaction operation. If the value is set to 4, it indicates that
a clock transmission configuration is added. If the value is set to 6,
it indicates that an existing clock transmission configuration is deleted.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.25.1.6.1.5

hwACMClockIPTable

table

.1.3.6.1.4.1.2011.6.25.1.8 · 1 row entry · 4 columns

Open in standard view

Clock ACM source IP table.
The index of this table is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

hwACMClockIPEntry entry .1.3.6.1.4.1.2011.6.25.1.8.1

Clock ACM source IP table.
The index of this entry is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

Indexes

hwACMClockIPIndex

Column Syntax OID

hwACMClockIPIndex

Currently, it supports only ACM IP address but it can be extended in the future.
Range: 0 - 2147483647

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.2011.6.25.1.8.1.1

hwACMClockIP

ACM cLOCK switch IP address at layer 3.
Range: 0.0.0.0-255.255.255.255

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.8.1.2

hwACMClkPostion

Physical position of clock source ACM IP address.
The highest byte is useless. The second byte describes the frame ID,
The third byte describes the slot ID.
The lowest byte is useless.
The following shows how to use par…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.8.1.3

hwACMClockIPRowStatus

Rowstatus of the ACM clock IP address.
Options:
1. createAndGo(4) - Creates an ACM clock IP address
2. destroy(6) - Destroys an ACM clock IP address.

Enumerationr/w

Enumerated Values:

4	createAndGo
6	destroy

.1.3.6.1.4.1.2011.6.25.1.8.1.4

hwBitsPortManageTable

table

.1.3.6.1.4.1.2011.6.25.1.9 · 1 row entry · 12 columns

Open in standard view

Time management table.
The index of this table is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

hwBitsPortManageEntry entry .1.3.6.1.4.1.2011.6.25.1.9.1

Time management table.
The index of this entry is ifIndex which comes from
ifTable. The method for using ifIndex is provided in ifIndex's mib description.

Indexes

IF-MIBifIndex

Column Syntax OID

hwBitsPortClkWorkMode

Port work mode of BITS clock.
Options:
1. e1(1) - indicates that E1 type of clock input/output.
2. t1(2) - indicates that T1 type of clock input/output
3. f2mhz(3) - indicates that 2MHz type of clock i…

Enumerationr/w

Enumerated Values:

1	e1
2	t1
3	f2mhz
255	invalid

.1.3.6.1.4.1.2011.6.25.1.9.1.1

hwBitsPortTimeWorkMode

Time work mode of Bits clock.
Options:
1.ppsubx(1) - indicates that 1pps+ubx type of time input/output
2.dcls(2) - indicates that DCLS type of time input/output
3.invalid(255) - indicates th…

Enumerationr/w

Enumerated Values:

1	ppsubx
2	dcls
3	ppsnmea
255	invalid

.1.3.6.1.4.1.2011.6.25.1.9.1.2

hwBitsPortIOStatus

Time interface direction mode.
Options:
1.input(1) - indicates that the mode of time interface is input
2.output(2) - indicates that the mode of time interface source is output
3.invalid(255) - indicates that tim…

Enumerationr/w

Enumerated Values:

1	input
2	output
255	invalid

.1.3.6.1.4.1.2011.6.25.1.9.1.3

hwPtpBitsClockAccuracy

The clockAccuracy characterizes a clock for the purpose of the best master clock (BMC) algorithm. The value of
this attribute shall be estimated by the clock to a precision consistent with the value of the selected enum…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.1.9.1.4

hwPtpBitsClockClass

The clockClass attribute of an ordinary or boundary clock denotes the traceability of the time or frequency
distributed by the grandmaster clock.
BC:
Range: 0-255

1. 6 - indicates that shall desi…

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.1.9.1.5

hwPtpBitsPriority1

The attribute priority1 is used in the execution of the best master clock algorithm. Lower values take precedence.
Range: 0-255
Default: 128

This attribute is invalid in T-BC mode.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.1.9.1.6

hwPtpBitsPriority2

The attribute priority2 is used in the execution of the best master clock algorithm. Lower values take precedence.
Range: 0-255
Default: 128

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.1.9.1.7

hwPtpBitsTimeSource

This attribute indicates the source of time used by the grandmaster clock.
Options:
1.atomicClock(16) - indicates that any device, or device directly connected to such a device,
that is…

Enumerationr/w

Enumerated Values:

16	atomicClock
32	gPS
48	terrestrialRadio
64	ptp
80	ntp
96	handSet
144	other
160	internalOscillator

.1.3.6.1.4.1.2011.6.25.1.9.1.8

hwBits1ppsDelayDirection

Delay mode of the time signal on the BITS port.
Options:
1.receive(1) - indicates that delay mode is receive
2.send(2) - indicates that delay mode is send

Enumerationr/w

Enumerated Values:

1	receive
2	send

.1.3.6.1.4.1.2011.6.25.1.9.1.9

hwBits1ppsDelayValue

Adjusted delay of the time signal on the BITS port. In receive mode, it ranges from 0 to 200000.
In send mode, it ranges from 0 to 1600.
Unit:ns
Default: 0

Integer32r/w

Constraints:
range: 0-200000

.1.3.6.1.4.1.2011.6.25.1.9.1.10

hwPtpBitsPortLocalPriority

In T-BC mode, the local priority of the BITS port is configured to calculate the optimum master clock.
The smaller the value, the higher the priority.
Range: 1-255
Default value: 128

This attribute is i…

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.2011.6.25.1.9.1.11

hwPtpBitsOffsetScaledLogVariance

Indicates estimate of the variations of the local clock from a linear timescale.
In T-BC mode, it can only be 0x4E5D (default) and 0xFFFF.

This attribute is invalid in BC mode.

Integer32r/w

Constraints:
range: -1-65535

.1.3.6.1.4.1.2011.6.25.1.9.1.12

hw1588ClkPtpPortManageTable

table

.1.3.6.1.4.1.2011.6.25.1.10 · 1 row entry · 31 columns

Open in standard view

1588 clock PTP port management table.
The index of this table is ifIndex which comes from ifTable.
The method for using ifIndex is provided in ifIndex's mib description.

hw1588ClkPtpPortManageEntry entry .1.3.6.1.4.1.2011.6.25.1.10.1

1588 clock PTP port management table.
The index of this entry is ifIndex which comes from ifTable.
The method for using ifIndex is provided in ifIndex's mib description.

Indexes

IF-MIBifIndex

Column Syntax OID

hw1588ClkPtpPortState

1588 port status.
Options:
1.initializing(1) - indicates that the state of 1588 clock PTP port is initializing
2.faulty(2) - indicates that the state of 1588 clock PTP port is faulty
3.disabled(3) - indicat…

Enumeration

Enumerated Values:

1	initializing
2	faulty
3	disabled
4	listening
5	premaster
6	master
7	passive
8	uncalibrated
9	slave
255	invalid

.1.3.6.1.4.1.2011.6.25.1.10.1.1

hw1588ClkPtpPortEnable

Enable or disable the 1588 function of PTP port.
Options:
1. enable(1) -Enable the 1588 function of this port
2. disable(2) -Disable the 1588 function of this port
Default: disable(2)

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.25.1.10.1.2

hw1588ClkPtpPortVlan obsolete

PTP VLAN.
Range: 0 - 4094

Integer32r/w

Constraints:
range: 0-4094

.1.3.6.1.4.1.2011.6.25.1.10.1.3

hw1588ClkPtpPortSourceIp obsolete

PTP port source IP address

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.10.1.4

hw1588ClkPtpPortMsgFormat

Enumeration

Enumerated Values:

1	ptpeth
2	ptpip

.1.3.6.1.4.1.2011.6.25.1.10.1.5

hw1588ClkPtpPortInfoMode

PTP info mode.
Default: multicast(1)
Options:
1. multicast(1) - indicates that the Info mode of the 1588 clock PTP port is multicast
2. unicast(2) - indicates that the Info mode of the 1588 clock PTP port is unicast

Enumeration

Enumerated Values:

1	multicast
2	unicast

.1.3.6.1.4.1.2011.6.25.1.10.1.6

hw1588ClkPtpPortAnnounceSendTimeInterval

Interval for sending announce packets.
BC:
Default: 1/8s(7)
Options:
1. 1/16s (6) - indicates that the time interval is 1/16s
2. 1/8s (7) - indicates that the time interval is 1/8s
3. 1/4s (8) - indi…

Integer32r/w

Constraints:
range: 6-14

.1.3.6.1.4.1.2011.6.25.1.10.1.7

hw1588ClkPtpPortSyncSendTimeInterval

Interval for sending sync packets.
BC:
Default: 1/16s(6)
Options:
1. 1/256s (2) - indicates that the time interval is 1/256s
2. 1/128s (3) - indicates that the time interval is 1/128s
3. 1/64s (4) - indi…

Integer32r/w

Constraints:
range: 2-11

.1.3.6.1.4.1.2011.6.25.1.10.1.8

hw1588ClkPtpPortReqSendTimeInterval

Interval for sending req packets.
BC:
Default: 1/8s(7)
Options:
1. 1/16s (6) - indicates that the time interval is 1/16s
3. 1/8s (7) - indicates that the time interval is 1/8s
3. 1/4…

Integer32r/w

Constraints:
range: 6-14

.1.3.6.1.4.1.2011.6.25.1.10.1.9

hw1588ClkPtpPortLineWarpMode

Type of the asymmetric transmission windage for optical
fibers, the default value is length(1).
Options:
1. length(1) - indicates that the warp is represented by length
2. time(2) - indicates that the warp is represen…

Enumerationr/w

Enumerated Values:

1	length
2	time

.1.3.6.1.4.1.2011.6.25.1.10.1.10

hw1588ClkPtpPortLineWarpDirect

Fiber windage direction, the default value is positive(1).
Options:
1. positive(1) - indicates that the warp is in the positive direction
2. negative(2) - indicates that the warp is in the negative direction

Enumerationr/w

Enumerated Values:

1	positive
2	negative

.1.3.6.1.4.1.2011.6.25.1.10.1.11

hw1588ClkPtpPortLineWarpValue

PTP line warp value.
If warp mode is length(1), the range is 0~14562m.
If warp mode is time(2) the range is 0~65529 ns.

Integer32r/w

Constraints:
range: 0-65529

.1.3.6.1.4.1.2011.6.25.1.10.1.12

hw1588ClkPtpPortAnnounceTimeout

Announce timeout specifies that the interval for receiving announce packets on the port.
BC:
Range: 2 - 255
Default value: 3
T-BC:
Range: 3 - 255
Default value: 3

Integer32r/w

Constraints:
range: 2-255

.1.3.6.1.4.1.2011.6.25.1.10.1.13

hw1588ClkPtpPortDomainNum obsolete

1588 clock domain number.
Range: 0-255
Default value: 0

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.1.10.1.14

hw1588ClkDSCP obsolete

1588 clock DSCP:0-63.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.2011.6.25.1.10.1.15

hw1588ClkVlanPRI obsolete

1588 clock Vlan priority:0-7.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.2011.6.25.1.10.1.16

hw1588ClkPtpPortDelayMechanism

Delay measurement mechanism.
BC:
Options:
1.delayMechanism(1) - indicates that delay mechanism is delay-mechanism.
2.pdelayMechanism(2) - indicates that delay mechanism is pdelay-mechanism.
Default: delay…

Enumerationr/w

Enumerated Values:

1	delayMechanism
2	pdelayMechanism

.1.3.6.1.4.1.2011.6.25.1.10.1.17

hw1588ClkPtpPortMacDestinationMac

Destination MAC address of MAC-encapsulated packets.
BC:
When the delay measurement mechanism is delay, the default destination MAC address is 011b-1900-0000.
When the delay measurement mechanism is pdelay, the …

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.6.25.1.10.1.18

hw1588ClkPtpPortUdpDestinationMac

Destination MAC address of UDP-encapsulated packets.
When the delay measurement mechanism is delay, the default destination MAC address is 0100-5e00-0181.
When the delay measurement mechanism is pdelay, the default dest…

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.6.25.1.10.1.19

hw1588ClkPtpPortUdpEgressSourceIp

Source IP address of UDP-encapsulated packets.
Default:0.0.0.0

This attribute is invalid in T-BC mode.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.10.1.20

hw1588ClkPtpPortUdpEgressDestinationIp

Destination IP address of UDP-encapsulated packets.
When the delay measurement mechanism is delay, the default destination IP address is 224.0.1.129.
When the delay measurement mechanism is pdelay, the default destinati…

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.10.1.21

hw1588ClkPtpPortUdpVlanPRI

VLAN priority of UDP-encapsulated packets.
Default:7
Invalid(-1)

This attribute is invalid in T-BC mode.

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.2011.6.25.1.10.1.22

hw1588ClkPtpPortMacVlanPRI

VLAN priority of MAC-encapsulated packets.
Default:7
Invalid(-1)

This attribute is invalid in T-BC mode.

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.2011.6.25.1.10.1.23

hw1588ClkPtpPortUdpEgressDscp

DSCP of UDP-encapsulated packets.
Default:56
Invalid(-1)

This attribute is invalid in T-BC mode.

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.2011.6.25.1.10.1.24

hw1588ClkPtpPortClockStep

Clock step mode.
Options:
1.oneStep(1) - indicates that clock step mode is one-step.
2.twoStep(2) - indicates that clock step mode is two-step.
Default: oneStep(1)

Enumerationr/w

Enumerated Values:

1	oneStep
2	twoStep

.1.3.6.1.4.1.2011.6.25.1.10.1.25

hw1588ClkPtpPortUdpVlan

VLAN of UDP-encapsulated packets.
Default: untag(0)
Invalid(-1)

This attribute is invalid in T-BC mode.

Integer32r/w

Constraints:
range: -1-4094

.1.3.6.1.4.1.2011.6.25.1.10.1.26

hw1588ClkPtpPortMacVlan

VLAN of MAC-encapsulated packets.
BC:
Default: untag(0)
Invalid(-1)
T-BC:
Supports only untag(0).

Integer32r/w

Constraints:
range: -1-4094

.1.3.6.1.4.1.2011.6.25.1.10.1.27

hwPtpPortRingFiberLengthChangeValue

The change (unit: ns) of the fiber length in a ring network detection. It may be a positive or negative value, which depends on the next node.
If the value is -1, the ring network detection function does not take effect.

Integer32

Constraints:
range: -1-65529

.1.3.6.1.4.1.2011.6.25.1.10.1.28

hwPtpPortRingFiberLengthChangeValueFlag

Flag of the change of the fiber length in a ring network detection.
Options:
1.invalid(-1) - indicates that the the ring network detection function does not take effect.
2.negative(1) - indicates that the change of …

Enumeration

Enumerated Values:

-1	invalid
1	negative
2	positive

.1.3.6.1.4.1.2011.6.25.1.10.1.29

hw1588ClkPtpPortNotSlave

In T-BC mode, this port cannot be the slave port when notSlave is enable;
this port can be the slave port when notSlave is disable.
By default, it is enable(1).

This attribute is invalid in BC mod…

Enumerationr/w

Enumerated Values:

1	enable
2	disable
255	invalid

.1.3.6.1.4.1.2011.6.25.1.10.1.30

hw1588ClkPtpPortLocalPriority

In T-BC mode, the local priority of the port is configured to calculate the optimum master clock.
The smaller the value, the higher the priority.
Range: 1-255
Default value: 128

This attribute is i…

Integer32r/w

Constraints:
range: 1-255
range: -1--1

.1.3.6.1.4.1.2011.6.25.1.10.1.31

hw1588ACRMasterTable

table

.1.3.6.1.4.1.2011.6.25.1.12.1 · 1 row entry · 4 columns

Open in standard view

1588 ACR clock manage table.
The index of this table is master index.

hw1588ACRMasterEntry entry .1.3.6.1.4.1.2011.6.25.1.12.1.1

1588 ACR clock manage table.
The index of this entry is master index.

Indexes

hw1588ACRMasterIndex

Column Syntax OID

hw1588ACRMasterIndex

Index of 1588 ACR master.
Range: 1 - 2

Integer32r/w

Constraints:
range: 1-2

.1.3.6.1.4.1.2011.6.25.1.12.1.1.1

hw1588ACRMasterIPAddr

1588 ACR master IP address

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.12.1.1.2

hw1588ACRMasterNegotiate

Port enabled type.
Options:
1. idle(1) - the negotiate state is idle
2. negotiate(2)- the negotiate state is negotiate

Enumeration

Enumerated Values:

1	idle
2	negotiate

.1.3.6.1.4.1.2011.6.25.1.12.1.1.3

hw1588ACRRowStatus

Row status

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.25.1.12.1.1.4

hw1588ACRServerTable

table

.1.3.6.1.4.1.2011.6.25.1.12.4 · 1 row entry · 8 columns

Open in standard view

1588ACR server management table.
The index of this table is server index.

hw1588ACRServerEntry entry .1.3.6.1.4.1.2011.6.25.1.12.4.1

1588ACR server management table.
The index of this entry is server index.

Indexes

hw1588ACRServerIndex

Column Syntax OID

hw1588ACRServerIndex

The server index.
Range: 1-2

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.2011.6.25.1.12.4.1.1

hw1588ACRServerIpAddr

The IP address of server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.1.12.4.1.2

hw1588ACRServerNegoStatus

The status of negotiation.
Options:
1. init(1) - no enable negotiation
2. success(2) - negotiate succesfully
3. failed(3) - negotiate failed

Enumeration

Enumerated Values:

1	init
2	success
3	failed

.1.3.6.1.4.1.2011.6.25.1.12.4.1.3

hw1588ACRServerSsm

The quality level.
Options:
1. prc(2) - prc
2. ssua(4) - ssua
3. ssub(8) - ssub
4. sec(11) - sec
5. dnu(15) - dnu

Enumeration

Enumerated Values:

2	prc
4	ssua
8	ssub
11	sec
15	dnu

.1.3.6.1.4.1.2011.6.25.1.12.4.1.4

hw1588ACRServerPriority

The priority.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.1.12.4.1.5

hw1588ACRServerPTSFLossAnnounce

The announce PTSF status.
Options:
1. normal(1) - status is normal
2. failed(2) - status is abnormal
3. none(255) - not referenced

Enumeration

Enumerated Values:

1	normal
2	failed
255	none

.1.3.6.1.4.1.2011.6.25.1.12.4.1.6

hw1588ACRServerPTSFLossSync

The sync PTSF status.
Options:
1. normal(1) - status is normal
2. failed(2) - status is abnormal
3. none(255) - not referenced

Enumeration

Enumerated Values:

1	normal
2	failed
255	none

.1.3.6.1.4.1.2011.6.25.1.12.4.1.7

hw1588ACRServerPTSFLossDelayResp

The delay response PTSF status.
Options:
1. normal(1) - status is normal
2. failed(2) - status is abnormal
3. none(255) - not referenced

Enumeration

Enumerated Values:

1	normal
2	failed
255	none

.1.3.6.1.4.1.2011.6.25.1.12.4.1.8

hwOntClkProfileGlobalInfoTable

table

.1.3.6.1.4.1.2011.6.25.2.1 · 1 row entry · 7 columns

Open in standard view

ont clk profile global management table.

hwOntClkProfileGlobalInfoEntry entry .1.3.6.1.4.1.2011.6.25.2.1.1

This table manage ont clk profile global setting.

Indexes

hwOntClkProfileInfoNameIndex

Column Syntax OID

hwOntClkProfileInfoNameIndex

Ont clk Profile name Index.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.2011.6.25.2.1.1.1

hwOntClkProfileRowStatus

Rowstatus of the Ont clk profile.
Options:
1. createAndGo(4) - Creates an Ont clk profile
2. destroy(6) - Destroys Ont clk profile.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.2011.6.25.2.1.1.2

hwOntClkProfileType

The Ont Clk Profile device type.
Options:
1.bc - general
2.tbc - g.8273.1
Default: bc

Enumerationr/w

Enumerated Values:

1	bc
2	tbc

.1.3.6.1.4.1.2011.6.25.2.1.1.3

hwOntClkProfileQlMode

The switch of Ont Clk QL-MODE.
Options:
1.enable(1) - enable QL-MODE
2.disable(2) - disable QL-MODE
Default: disable(2)

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.25.2.1.1.4

hwOntClkProfilePtpSwitch

The switch of Ont PTP Switch.
Options:
1.enable(1) - enable ont clk profile ptp
2.disable(2) - disable ont clk profile ptp
Default: disable(2)

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.25.2.1.1.5

hwOntClkProfilePtpBmcSwitch

The switch of Ont PTP BMC Switch.
Options:
1.enable(1) - enable ont ptp BMC
2.disable(2) - disable ptp BMC
Default: disable(2)

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.25.2.1.1.6

hwOntClkProfilePtpDomain

PTP domain value.
BC:
Range: 0-255
Default: 0
T-BC:
Range: 24-43
Default: 24

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.6.25.2.1.1.7

hwOntClkProfilePortInfoTable

table

.1.3.6.1.4.1.2011.6.25.2.2 · 1 row entry · 14 columns

Open in standard view

ont clk profile global port management table.

hwOntClkProfilePortInfoEntry entry .1.3.6.1.4.1.2011.6.25.2.2.1

This table manage ont clk profile port setting.

Indexes

hwOntClkProfileInfoNameIndex hwOntClkProfOntPortCfgOntPhyType hwOntClkProfOntPortCfgOntPhyIndex

Column Syntax OID

hwOntClkProfOntPortCfgOntPhyType

This object indicates the port type of the ONT.

Enumeration

Enumerated Values:

13	t1
14	e1
24	fe
34	ge
37	vdsl
46	moca
47	eth
50	iphost

.1.3.6.1.4.1.2011.6.25.2.2.1.1

hwOntClkProfOntPortCfgOntPhyIndex

This object indicates the port index of the ONT.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.2.2.1.2

hwOntClkProfOntPortPtpSwtich

Enable or disable the 1588 function of PTP port.
Options:
1. enable(1) -Enable the 1588 function of this port
2. disable(2) -Disable the 1588 function of this port
Default: disable(2)

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.2011.6.25.2.2.1.3

hwOntClkProfOntPortPtpStep

Clock step mode.
Options:
1.oneStep(1) - indicates that clock step mode is one-step.
2.twoStep(2) - indicates that clock step mode is two-step.
Default: oneStep(1)

Enumerationr/w

Enumerated Values:

1	oneStep
2	twoStep

.1.3.6.1.4.1.2011.6.25.2.2.1.4

hwOntClkProfOntPortPtpDelayMode

Delay measurement mechanism.
Options:
1.delayMechanism(1) - indicates that delay mechanism is delay-mechanism.
2.pdelayMechanism(2) - indicates that delay mechanism is pdelay-mechanism.
Default: delayMechanism(1)

Enumerationr/w

Enumerated Values:

1	delayMechanism
2	pdelayMechanism

.1.3.6.1.4.1.2011.6.25.2.2.1.5

hwOntClkProfOntPortPtpAnnInterval

Integer32r/w

Constraints:
range: 6-14

.1.3.6.1.4.1.2011.6.25.2.2.1.6

hwOntClkProfOntPortPtpSyncInterval

Integer32r/w

Constraints:
range: 2-11

.1.3.6.1.4.1.2011.6.25.2.2.1.7

hwOntClkProfOntPortPtpReqInterval

Interval for sending req packets.
BC:
Default: 1/8s(7)
Options:
1. 1/16s (6) - indicates that the time interval is 1/16s
3. 1/8s (7) - indicates that the time interval is 1/8s
3. 1/4…

Integer32r/w

Constraints:
range: 6-14

.1.3.6.1.4.1.2011.6.25.2.2.1.8

hwOntClkProfOntPortPtpMsgFormat

Enumerationr/w

Enumerated Values:

1	ptpeth
2	ptpip

.1.3.6.1.4.1.2011.6.25.2.2.1.9

hwOntClkProfOntPortPtpTransportType

Enumerationr/w

Enumerated Values:

1	multicast
2	unicast

.1.3.6.1.4.1.2011.6.25.2.2.1.10

hwOntClkProfOntPortPtpVlan

VLAN of UDP-encapsulated or MAC-encapsulated packets.
Default: untag(0)
Invalid(-1)

Integer32r/w

Constraints:
range: -1-4094

.1.3.6.1.4.1.2011.6.25.2.2.1.11

hwOntClkProfOntPortPtpVlanPri

VLAN priority of UDP-encapsulated or MAC-encapsulated packets.
Default:7
Invalid(-1)

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.2011.6.25.2.2.1.12

hwOntClkProfOntPortPtpUdpDscp

DSCP of UDP-encapsulated packets.
Default:56
Invalid(-1)

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.2011.6.25.2.2.1.13

hwOntClkProfOntPortPtpDestMac

Destination MAC address of MAC-encapsulated packets.
T-BC:Supports only MAC-encapsulated packets and supports multicast MAC address configuration.
It can be 01-80-C2-00-00-0E (default) and 01-1B-19-00-00-00.
This attri…

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.6.25.2.2.1.14

hwOntClkGlobalInfoTable

table

.1.3.6.1.4.1.2011.6.25.2.3 · 1 row entry · 21 columns

Open in standard view

ont clk global management table.

hwOntClkGlobalInfoEntry entry .1.3.6.1.4.1.2011.6.25.2.3.1

This table manage ont clk global configuration table.

Indexes

IF-MIBifIndex hwOntClkObjectIndex

Column Syntax OID

hwOntClkObjectIndex

ONT ID.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.2.3.1.1

hwOntObjectClockProfileName

The name of ONT's clock profile.
When the string length is 0, it means the unbinding operation.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.2011.6.25.2.3.1.2

hwOntObjectPtpClockId

The 1588 clock identity of device.
The first 4 bytes are OUI and product ID and do not need to be configured.

OctetStringr/w

Constraints:
range: 8-8

.1.3.6.1.4.1.2011.6.25.2.3.1.3

hwOntObjectClkWorkMode

Clock out working mode.
Options:
1.trace(1) - indicates that the clock is working in tracing mode.
2.surge(2) - indicates that the clock is working in surge mode.
3.keep(3) - indicates that t…

Enumeration

Enumerated Values:

-1	invalid
1	trace
2	surge
3	keep
4	snap
5	thirdsurge

.1.3.6.1.4.1.2011.6.25.2.3.1.4

hwOntObjectClkLockState

Clock lock state.
Options:
1.locked(1) - indicates that the clock is locked.
2.unlocked(2) - indicates that the clock is unlocked.
3.invalid(-1) - indicates that it is not be queried.

Enumeration

Enumerated Values:

-1	invalid
1	locked
2	unlocked

.1.3.6.1.4.1.2011.6.25.2.3.1.5

hwOntObjectClkSrcState

Clock source state.
Options:
1.none(1) - indicates that the clock source index isn't configured.
2.normal(2) - indicates that the state of the clock source is active.
3.failure(3) - indicates th…

Enumeration

Enumerated Values:

-1	invalid
1	none
2	normal
3	failure
4	failureLoss
5	failureEFD

.1.3.6.1.4.1.2011.6.25.2.3.1.6

hwOntObjectClkSrcQL

Clock source quality level:
Options:
1. qlPRC(2) - indicates that primary reference clock.
2. qlSsuA(4) - indicates that the clock signal comes from class I or class.
V sub-clock prescribed o…

Enumeration

Enumerated Values:

-1	invalid
2	qlPRC
4	qlSsuA
8	qlSsuB
11	qlSEC
15	qlDNU
255	qlCLEAR

.1.3.6.1.4.1.2011.6.25.2.3.1.7

hwOntObjectPtpLockState

PTP lock state.
Options:
1.locked(1) - indicates that the PTP is locked.
2.unlocked(2) - indicates that the PTP is unlocked.
3.invalid(-1) - indicates that it is not be queried.

Enumeration

Enumerated Values:

-1	invalid
1	locked
2	unlocked

.1.3.6.1.4.1.2011.6.25.2.3.1.8

hwOntObjectPtpSrcState

1588 source status:
Options:
1.none(1) - indicates that the 1588 source index is not configured.
2.normal(2) - indicates that the status of 1588 source is normal.
3.failure(3) - indicates that the status of 1588 …

Enumeration

Enumerated Values:

-1	invalid
1	none
2	normal
3	failure

.1.3.6.1.4.1.2011.6.25.2.3.1.9

hwOntObjectPtpGmClockID

Grand master clock ID.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.6.25.2.3.1.10

hwOntObjectPtpParentClockID

PTP parent clockID.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.2011.6.25.2.3.1.11

hwOntObjectPtpParentPortID

PTP parent portnumber.
Invalid(-1)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.2.3.1.12

hwOntObjectPtpGmPriority1

Grand master clock priority1.
Invalid(-1)

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.6.25.2.3.1.13

hwOntObjectPtpGmPriority2

Grand master clock priority2.
Invalid(-1)

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.6.25.2.3.1.14

hwOntObjectPtpGmAccuracy

Grand master clock accuracy.
Invalid(-1)

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.6.25.2.3.1.15

hwOntObjectPtpGmClockClass

Grand master clock class.
Invalid(-1)

Integer32

Constraints:
range: -1-255

.1.3.6.1.4.1.2011.6.25.2.3.1.16

hwOntObjectPtpGmTimeSource

Indicates the source of time used by the grandmaster clock.
Invalid(-1)

Enumeration

Enumerated Values:

-1	invalid
16	atomicclock
32	gps
48	terrestrialradio
64	ptp
80	ntp
96	handset
144	other
160	internaloscillator

.1.3.6.1.4.1.2011.6.25.2.3.1.17

hwOntObjectPtpGmTimeScale

The time scale of the grandmaster clock.
Invalid(-1)

Enumeration

Enumerated Values:

-1	invalid
1	ptp
2	arb

.1.3.6.1.4.1.2011.6.25.2.3.1.18

hwOntObjectPtpFrequencyTraceable

If not invalid, the value is true if the frequency determinning the timescale is traceable to a primary reference, otherwise the value is false.
Options:
1.false(1) - indicates that the frequency determinning the…

Enumeration

Enumerated Values:

-1	invalid
1	false
2	true

.1.3.6.1.4.1.2011.6.25.2.3.1.19

hwOntObjectPtpTimeTraceable

If not invalid, the value is ture if the time is traceable to a primary reference, otherwise the value is false.
Options:
1.false(1) - indicates that the time isn't traceable to a primary reference.
2.true…

Enumeration

Enumerated Values:

-1	invalid
1	false
2	true

.1.3.6.1.4.1.2011.6.25.2.3.1.20

hwOntObjectPtpStepRemoved

The value is the number of paths (number of BCs) between the local clock and the grand master clock.
Invalid(-1)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.2.3.1.21

hwOntClkPortInfoTable

table

.1.3.6.1.4.1.2011.6.25.2.4 · 1 row entry · 10 columns

Open in standard view

ont clk global discrete management table.

hwOntClkPortInfoEntry entry .1.3.6.1.4.1.2011.6.25.2.4.1

This table manage ont clk discrete configuration table.

Indexes

IF-MIBifIndex hwOntClkObjectIndex hwOntClkObjectPortType hwOntClkObjectPortId

Column Syntax OID

hwOntClkObjectPortType

This object indicates the port type of the ONT.

Enumeration

Enumerated Values:

13	t1
14	e1
24	fe
34	ge
37	vdsl
46	moca
47	eth
50	iphost

.1.3.6.1.4.1.2011.6.25.2.4.1.1

hwOntClkObjectPortId

This object indicates the port index of the ONT.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.2011.6.25.2.4.1.2

hwOntClkObjectPortPtpMsgFormat

PTP message encapsulation format,the default value is PTPETH(1).
Options:
1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet.
2. ptpip(2) - indicates that the PTP message is encapsu…

Enumerationr/w

Enumerated Values:

-1	invalid
1	ptpeth
2	ptpip
5	default

.1.3.6.1.4.1.2011.6.25.2.4.1.3

hwOntClkObjectPortPtpTransportType

PTP info mode.
Default: multicast(1)
Options:
1. multicast(1) - indicates that the Info mode of the PTP port is multicast.
2. unicast(2) - indicates that the PTP info mode of the PTP port is unicast.
3. invalid(-1) -…

Enumerationr/w

Enumerated Values:

-1	invalid
1	multicast
2	unicast

.1.3.6.1.4.1.2011.6.25.2.4.1.4

hwOntClkObjectPortPtpVlan

VLAN of UDP-encapsulated or MAC-encapsulated packets.
Default: untag(0)
Invalid(-1)

Integer32r/w

Constraints:
range: -1-4094

.1.3.6.1.4.1.2011.6.25.2.4.1.5

hwOntClkObjectPortPtpVlanPri

VLAN priority of UDP-encapsulated or MAC-encapsulated packets.
Default:7
Invalid(-1)

Integer32r/w

Constraints:
range: -1-7

.1.3.6.1.4.1.2011.6.25.2.4.1.6

hwOntClkObjectPortPtpUdpDscp

DSCP of UDP-encapsulated packets.
Default:56
Invalid(-1)

Integer32r/w

Constraints:
range: -1-63

.1.3.6.1.4.1.2011.6.25.2.4.1.7

hwOntClkObjectPortPtpDestMac

Destination MAC address of UDP-encapsulated or MAC-encapsulated packets.
Invalid(ff-ff-ff-ff-ff-ff)

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.2011.6.25.2.4.1.8

hwOntClkObjectPortPtpSrcIp

Source IP address of UDP-encapsulated packets.
Default:0.0.0.0

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.2.4.1.9

hwOntClkObjectPortPtpDstIp

BC:This attribute cannot be configured and can only be set to the default value in multicast mode.
It can be configured only in unicast mode.
This attribute is invalid in T-BC mode.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.2011.6.25.2.4.1.10