hwBitsPortClkWorkMode
HUAWEI-CLK-MIB ·
.1.3.6.1.4.1.2011.6.25.1.9.1.1
Object
column
r/w
Enumeration
Port work mode of BITS clock. Options: 1. e1(1) - indicates that E1 type of clock input/output. 2. t1(2) - indicates that T1 type of clock input/output 3. f2mhz(3) - indicates that 2MHz type of clock input/output 4. invalid(255) - indicates that it is not configured
Context
- MIB
- HUAWEI-CLK-MIB
- OID
.1.3.6.1.4.1.2011.6.25.1.9.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwBitsPortManageEntry
- Table
- hwBitsPortManageTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | e1 |
2 | t1 |
3 | f2mhz |
255 | invalid |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwBits1ppsDelayValue Adjusted delay of the time signal on the BITS port. In receive mode, it ranges from 0 to 200000.
In send mode, it ranges from 0 to 1600.
Unit:ns
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.10 |
| hwPtpBitsPortLocalPriority In T-BC mode, the local priority of the BITS port is configured to calculate the optimum master clock.
The smaller the value, the higher the priority.
Range: 1-255
Default value… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.11 |
| hwPtpBitsOffsetScaledLogVariance Indicates estimate of the variations of the local clock from a linear timescale.
In T-BC mode, it can only be 0x4E5D (default) and 0xFFFF.
This attribute is inval… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.12 |
| hwBitsPortTimeWorkMode Time work mode of Bits clock.
Options:
1.ppsubx(1) - indicates that 1pps+ubx type of time input/output
2.dcls(2) - indicates that DCLS type of time input/out… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.9.1.2 |
| hwBitsPortIOStatus Time interface direction mode.
Options:
1.input(1) - indicates that the mode of time interface is input
2.output(2) - indicates that the mode of time interface source is ou… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.9.1.3 |
| hwPtpBitsClockAccuracy The clockAccuracy characterizes a clock for the purpose of the best master clock (BMC) algorithm. The value of
this attribute shall be estimated by the clock to a precision consis… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.4 |
| hwPtpBitsClockClass The clockClass attribute of an ordinary or boundary clock denotes the traceability of the time or frequency
distributed by the grandmaster clock.
BC:
Range: 0-255
1… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.5 |
| hwPtpBitsPriority1 The attribute priority1 is used in the execution of the best master clock algorithm. Lower values take precedence.
Range: 0-255
Default: 128
This attribute is… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.6 |
| hwPtpBitsPriority2 The attribute priority2 is used in the execution of the best master clock algorithm. Lower values take precedence.
Range: 0-255
Default: 128 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.9.1.7 |
| hwPtpBitsTimeSource This attribute indicates the source of time used by the grandmaster clock.
Options:
1.atomicClock(16) - indicates that any device, or device directly connected to such a de… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.9.1.8 |
| hwBits1ppsDelayDirection Delay mode of the time signal on the BITS port.
Options:
1.receive(1) - indicates that delay mode is receive
2.send(2) - indicates that delay mode is send | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.9.1.9 |