hw1588ClkInOperStatus
HUAWEI-CLK-MIB ·
.1.3.6.1.4.1.2011.6.25.1.5.1.4
Object
column
Enumeration
Clock 1588 source status: Options: 1.none(1) - indicates that the clock source index is not configured 2.normal(2) - indicates that the status of clock source is normal 3.failure(3)- indicates that the status of clock source is faulty
Context
- MIB
- HUAWEI-CLK-MIB
- OID
.1.3.6.1.4.1.2011.6.25.1.5.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hwClock1588ManageEntry
- Table
- hwClock1588ManageTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | normal |
3 | failure |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw1588ClkInIndex Clock 1588 source index.
Range: 0-9 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.1 |
| hw1588ClkPtpLineWarpMode obsolete PTP line warp mode, the default value is length(1).
Options:
1. length(1) - indicates that the warp is represented by length
2. time(2) - indicates that the warp is represented … | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.10 |
| hw1588ClkPtpLineWarpDirect obsolete PTP line warp direct, the default value is positive(1).
Options:
1. positive(1) - indicates that the warp is in the positive direction
2. negative(2) - indicates that the warp i… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.11 |
| hw1588ClkPtpLineWarpValue obsolete PTP Line Warp Value:
IF warp mode is length(1), the range is 0~14562m.
If warp mode is time(2), the range is 0~65529 ns. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.12 |
| hw1588ClkPtpTimeSourceID obsolete PTP source port ID:
It is 10 bytes in length and the default value is 0. | column | OctetString | .1.3.6.1.4.1.2011.6.25.1.5.1.13 |
| hw1588ClkPtpVlan obsolete PTP Vlan:
Range: 0-4094.
Default: 1. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.14 |
| hw1588ClkPtpInfoMode obsolete PTP info mode,default value is multicast(1).
Options:
1. multicast(1) - indicates that the PTP info mode is multicast.
2. unicast(2) - indicates that the PTP info mode i… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.15 |
| hw1588ClkPtpAnnounceTimeout obsolete Announce timeout:
Range: 1-1048576 ms
Range: 1 - 1048576
Default: 128 ms | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.16 |
| hw1588ClkGMClockID obsolete Grandmaster clock ID. | column | OctetString | .1.3.6.1.4.1.2011.6.25.1.5.1.17 |
| hw1588ClkAnnounceSendTimeInterval obsolete 1588 announce send time interval,the default value is 1/8s(8).
Options:
1. 1/1024s(1) - indicates that the time interval is 1/1024s
2. 1/512s (2) - indicates that the time inte… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.18 |
| hw1588ClkSyncSendTimeInterval obsolete 1588 sync send time interval,the default value is 1/8s(8).
Options:
1. 1/1024s(1) - indicates that the time interval is 1/1024s
2. 1/512s (2) - indicates that the time interval … | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.19 |
| hw1588ClkInPostion The index of physical position of clock 1588 source.
The highest byte is useless.
The second byte describes the frame ID.
The third byte describes the slot ID.
The lowest byte des… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.5.1.2 |
| hw1588ClkPtpLockState 1588 port lock state.
Options:
1. locked(1) - indicates that the clock is locked
2. unlocked(2) - indicates that the clock is unlocked | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.20 |
| hw1588ClkInWorkMode Time source type.
Options:
1. ptp(1) - indicates that time source that need to specify frame/slot/port
2. bits(2) - indicates that time source of a BITS port | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.21 |
| hw1588ClkInSelectStatus Time source select status.
Options:
1. yes(1) - indicates that the time source is selected as the current time source.
2. no(2) - indicates that the time source isn't selected … | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.22 |
| hw1588ClkPriority Clock 1588 source priority.
The priority ranges from 0 to 9 in a descending order.If the value is 255 in the get operation,
it indicates that the priority of the ptp source isn't … | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.3 |
| hw1588ClkInRowStatus Clock 1588 source operation includes adding and deleting clock 1588 source.
If the value is set to 4, it indicates that a clock 1588 source is created.
If the value is set to 6, i… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.25.1.5.1.5 |
| hw1588ClkReqSendTimeInterval obsolete 1588 Req send time interval.
Options:
1.1/1024s( 1) - indicates that the time interval is 1/1024s
2.1/512s( 2) - indicates that the time interval is 1/512s
3.1/256s( 3) - ind… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.6 |
| hw1588ClkDomainNumber obsolete 1588 clock domain number:
Range: 0-255
Default: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.5.1.7 |
| hw1588ClkPtpPEMode obsolete PTP MODE,default value is e2e(2).
Options:
1. p2p(1) - indicates that the 1588 clock Ptp Pe Mode is p2p
2. e2e(2) - indicates that the 1588 clock Ptp Pe Mode is e2e | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.8 |
| hw1588ClkPtpMsgFormat obsolete PTP message encapsulation format,the default value is PTPETH(1).
Options:
1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet
2. ptpip(2) - indi… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.5.1.9 |