hwClkInPostion
HUAWEI-CLK-MIB ·
.1.3.6.1.4.1.2011.6.25.1.1.1.2
Object
The ifIndex of physical position of clock source. If the clock source isn't a sysline clock, the value will be 0xFFFFFFFFFFFFFF. The first byte indicates the NO. of CESoP index. The second byte indicates the NO. of frame, the third byte indicates the NO. of slot and the lowest byte indicates the port ID. The following shows how to use parameter during the get or set operation: 0x 01, 00,00,00 Cesop ID; 0~1 0x 02, 00,00,00 System clock as an external clock 0x 03, 00,00,00 1588 clock as an system clock 0x 00, FF,00,00 Frame ID; 0~255 0x 00, 00,FF,00 Slot ID; 0~255 0x 00, 00,00,FF Port ID; 0~255
Context
- MIB
- HUAWEI-CLK-MIB
- OID
.1.3.6.1.4.1.2011.6.25.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwClockInManageEntry
- Table
- hwClockInManageTable
- Siblings
- 11
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwClkInIndex Clock source index: ranging from 0 to 9. The value 255 indicates the local
clock source.
Range: 0-9 | 255 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.1.1.1 |
| hwClkInClearFaultRecord Clear fault record of one clock source.
Options:
1.clearFaultRecord(1) -Clears fault records | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.10 |
| hwClkLockState Clock lock state.
Options:
1.locked(1) - indicates that the clock is locked
2.unlocked(2) - indicates that the clock is unlocked | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.11 |
| hwClkFreqDeviation Clock source freq-deviation-value
The value is ten times of actual frequency deviation value
Unit: 0.1ppm
The invalid value is 0x7fffffff | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.25.1.1.1.12 |
| hwClkInWorkMode Clock source type.
Includes the line clock source, BITS clock source, and local surge source.
If it is line clock source of a CES port, the clock source type may be CES line or C… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.3 |
| hwClkInOperStatus Clock source state.
Options:
1.none(1) - indicates that the clock source index isn't configured
2.normal(2) - indicates that the state of the clock source is active
3.… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.4 |
| hwClkInRowStatus Clock Source operation:
A user can add a clock source or clear a clock source.
After a user adds a clock source,the clock works in trace mode.
After a user clears a clock source, … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.25.1.1.1.5 |
| hwClkInBitsImpedance BITS clock impedance type.The impedance value must be set when the clock source is a bits clock.
Options:
1. bitsImpedance75ohm(1) - indicates that the impedance of this BI… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.6 |
| hwClkInBitsType BITS clock type:
Options:
1.bitsType2MHz(1) - indicates that the BITS clock type is 2MHz
2.bitsType2Mbps(2) - indicates that the BITS clock type is 2bps
3.bitsType64K… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.7 |
| hwClkInQL Clock source quality level:
Options:
1. qlPRC(2) - indicates that primary reference clock
2. qlSsuA(4) - indicates that the clock signal comes from class I or class
… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.8 |
| hwClkInFaultRecord Clock source fault record.
Options:
1.noFaultRecord(1) - indicates that there is no fault record
2.faultRecord(2) - indicates that the clock source had a fault record | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.1.1.9 |