hw1588ClkDSCP
HUAWEI-CLK-MIB ·
.1.3.6.1.4.1.2011.6.25.1.10.1.15
Object
column
obsolete
r/w
Integer32
1588 clock DSCP:0-63.
Context
- MIB
- HUAWEI-CLK-MIB
- OID
.1.3.6.1.4.1.2011.6.25.1.10.1.15- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- hw1588ClkPtpPortManageEntry
- Table
- hw1588ClkPtpPortManageTable
- Siblings
- 30
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hw1588ClkPtpPortState 1588 port status.
Options:
1.initializing(1) - indicates that the state of 1588 clock PTP port is initializing
2.faulty(2) - indicates that the state of 1588 clock PTP por… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.1 |
| hw1588ClkPtpPortLineWarpMode Type of the asymmetric transmission windage for optical
fibers, the default value is length(1).
Options:
1. length(1) - indicates that the warp is represented by length
2. time(2)… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.10 |
| hw1588ClkPtpPortLineWarpDirect Fiber windage direction, the default value is positive(1).
Options:
1. positive(1) - indicates that the warp is in the positive direction
2. negative(2) - indicates that the warp … | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.11 |
| hw1588ClkPtpPortLineWarpValue PTP line warp value.
If warp mode is length(1), the range is 0~14562m.
If warp mode is time(2) the range is 0~65529 ns. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.12 |
| hw1588ClkPtpPortAnnounceTimeout Announce timeout specifies that the interval for receiving announce packets on the port.
BC:
Range: 2 - 255
Default value: 3
T-BC:
Range: 3 - 255
Default value: 3 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.13 |
| hw1588ClkPtpPortDomainNum obsolete 1588 clock domain number.
Range: 0-255
Default value: 0 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.14 |
| hw1588ClkVlanPRI obsolete 1588 clock Vlan priority:0-7. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.16 |
| hw1588ClkPtpPortDelayMechanism Delay measurement mechanism.
BC:
Options:
1.delayMechanism(1) - indicates that delay mechanism is delay-mechanism.
2.pdelayMechanism(2) - indicates that delay mechanism… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.17 |
| hw1588ClkPtpPortMacDestinationMac Destination MAC address of MAC-encapsulated packets.
BC:
When the delay measurement mechanism is delay, the default destination MAC address is 011b-1900-0000.
When the del… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.25.1.10.1.18 |
| hw1588ClkPtpPortUdpDestinationMac Destination MAC address of UDP-encapsulated packets.
When the delay measurement mechanism is delay, the default destination MAC address is 0100-5e00-0181.
When the delay measureme… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2011.6.25.1.10.1.19 |
| hw1588ClkPtpPortEnable Enable or disable the 1588 function of PTP port.
Options:
1. enable(1) -Enable the 1588 function of this port
2. disable(2) -Disable the 1588 function of this port
Default: dis… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.2 |
| hw1588ClkPtpPortUdpEgressSourceIp Source IP address of UDP-encapsulated packets.
Default:0.0.0.0
This attribute is invalid in T-BC mode. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.25.1.10.1.20 |
| hw1588ClkPtpPortUdpEgressDestinationIp Destination IP address of UDP-encapsulated packets.
When the delay measurement mechanism is delay, the default destination IP address is 224.0.1.129.
When the delay measurement me… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.25.1.10.1.21 |
| hw1588ClkPtpPortUdpVlanPRI VLAN priority of UDP-encapsulated packets.
Default:7
Invalid(-1)
This attribute is invalid in T-BC mode. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.22 |
| hw1588ClkPtpPortMacVlanPRI VLAN priority of MAC-encapsulated packets.
Default:7
Invalid(-1)
This attribute is invalid in T-BC mode. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.23 |
| hw1588ClkPtpPortUdpEgressDscp DSCP of UDP-encapsulated packets.
Default:56
Invalid(-1)
This attribute is invalid in T-BC mode. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.24 |
| hw1588ClkPtpPortClockStep Clock step mode.
Options:
1.oneStep(1) - indicates that clock step mode is one-step.
2.twoStep(2) - indicates that clock step mode is two-step.
Default: oneStep(1) | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.25 |
| hw1588ClkPtpPortUdpVlan VLAN of UDP-encapsulated packets.
Default: untag(0)
Invalid(-1)
This attribute is invalid in T-BC mode. | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.26 |
| hw1588ClkPtpPortMacVlan VLAN of MAC-encapsulated packets.
BC:
Default: untag(0)
Invalid(-1)
T-BC:
Supports only untag(0). | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.27 |
| hwPtpPortRingFiberLengthChangeValue The change (unit: ns) of the fiber length in a ring network detection. It may be a positive or negative value, which depends on the next node.
If the value is -1, the ring network… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.28 |
| hwPtpPortRingFiberLengthChangeValueFlag Flag of the change of the fiber length in a ring network detection.
Options:
1.invalid(-1) - indicates that the the ring network detection function does not take effect.
2.negat… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.29 |
| hw1588ClkPtpPortVlan obsolete PTP VLAN.
Range: 0 - 4094 | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.3 |
| hw1588ClkPtpPortNotSlave In T-BC mode, this port cannot be the slave port when notSlave is enable;
this port can be the slave port when notSlave is disable.
By default, it is enable(1).
… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.30 |
| hw1588ClkPtpPortLocalPriority In T-BC mode, the local priority of the port is configured to calculate the optimum master clock.
The smaller the value, the higher the priority.
Range: 1-255
Default value: 128… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.31 |
| hw1588ClkPtpPortSourceIp obsolete PTP port source IP address | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2011.6.25.1.10.1.4 |
| hw1588ClkPtpPortMsgFormat PTP message encapsulation format,the default value is PTPETH(1).
Options:
1. ptpeth(1) - indicates that the PTP message is encapsulated into an Ethernet packet
2. ptpip(2) - indi… | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.5 |
| hw1588ClkPtpPortInfoMode PTP info mode.
Default: multicast(1)
Options:
1. multicast(1) - indicates that the Info mode of the 1588 clock PTP port is multicast
2. unicast(2) - indicates that the Info mode … | column | Enumeration | .1.3.6.1.4.1.2011.6.25.1.10.1.6 |
| hw1588ClkPtpPortAnnounceSendTimeInterval Interval for sending announce packets.
BC:
Default: 1/8s(7)
Options:
1. 1/16s (6) - indicates that the time interval is 1/16s
2. 1/8s (7) - indicates that the time in… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.7 |
| hw1588ClkPtpPortSyncSendTimeInterval Interval for sending sync packets.
BC:
Default: 1/16s(6)
Options:
1. 1/256s (2) - indicates that the time interval is 1/256s
2. 1/128s (3) - indicates that the time inte… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.8 |
| hw1588ClkPtpPortReqSendTimeInterval Interval for sending req packets.
BC:
Default: 1/8s(7)
Options:
1. 1/16s (6) - indicates that the time interval is 1/16s
3. 1/8s (7) - indicates that t… | column | Integer32 | .1.3.6.1.4.1.2011.6.25.1.10.1.9 |