G700-MG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
104

cmgModuleTable

table
.1.3.6.1.4.1.6889.2.9.1.1.11.1 · 1 row entry · 13 columns
Open in standard view 
Table of physical media modules in this media gateway.
cmgModuleEntry entry .1.3.6.1.4.1.6889.2.9.1.1.11.1.1
An entry in the table, representing a single media module.
Indexes
cmgModuleSlot
Column Syntax OID
cmgModuleSlot
Slot number of this module.
Integer32
Constraints:
range: 1-9
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.1
cmgModuleType
Type of this module.
Enumeration
Enumerated Values:
1t1e1-voip
2bri
3dcp
4analog
5t1e1
6voip
7icc
9fxo4fxs4
10bri2
11ds1wan
12uspwan
13dcp24hd
14poe24
16g350intana
17dcp24
18fxs24
19g250-int-analog-2L4T
20g250-int-analog-2L1T
21g250-int-BRI
22poe40
23g250-int-12pDCP
24g250-int-DS1
25poe24cr
26poe8
29g250-int-analog-6L8T
30tgm550-int-analog-2L2T
31tim514
32tim510
33tim521
34avayaAM110ApplicationModule
40g450Mainboard
41tim508
42tim516
43tim518
44i120-intana
45i40-int-analog-2L4T
46i40-int-analog-2L1T
47i40-int-BRI
48i40-int-DS1
49i40-A14-int-analog-6L8T
50avayaCommunicationManagerBranchEditionG450Mainboard
51g430Mainboard
52bri8
253invalid
255unknown
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.2
cmgModuleDescription
Description of this media module, e.g. 'Avaya E1/T1 media module
with integrated CSU/DSU'
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.3
cmgModuleName
User-assigned name of this media module.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.4
cmgModuleSerialNumber
Serial number of this module. The first 12 characters are meaningful.
Form is yyLLmmnnnnnn, where
yy = last 2 digits of the year of manufacture
LL = manufacturing facility, e.g. DR for Denver, Colorado
mm = month of ma…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.5
cmgModuleHWVintage
Hardware vintage of this module.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.6
cmgModuleHWSuffix
Hardware vintage suffix of this module.
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.7
cmgModuleFWVersion
Firmware version of this module. This duplicates information available
in the Load MIB. It shows the media module run image version, plus
the VoIP engine version if applicable.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.8
cmgModuleNumberOfPorts
Number of physical connectors on this module.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.9
cmgModuleFaultMask
Each bit of this value set to '1' indicates a specific fault
in the module.

Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in th…
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.10
cmgModuleStatusMask
Each bit of this value set to '1' indicates a specific status
condition in the module.

Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmos…
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.11
cmgModuleReset
Setting the value of this attribute to ON is interpreted as a reset
command for the module. It initiates a complete reinitialization of
the module and of all the devices incorporated inside the module.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.12
cmgModuleNumberOfChannels
Number of communications channels or spans on this module. Earlier
Avaya products have referred to T1E1 channels as ports. This media
gateway calls them channels.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.13

cmgDsuConfigTable

table obsolete
.1.3.6.1.4.1.6889.2.9.1.1.11.2.1 · 1 row entry · 15 columns
Open in standard view 
Configuration of E1/T1 DSUs in this media gateway.
cmgDsuConfigEntry entry .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1
An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.
Indexes
cmgDsuSlot cmgDsuPort
Column Syntax OID
cmgDsuSlot obsolete
Slot number of this DSU.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1
cmgDsuPort obsolete
Port number of this DSU.
Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2
cmgDsuPortEnable obsolete
This object allows a user to take the E1/T1 port out of service for
administration. During administration, it may be in an inconsistent
state. When administration is complete, the port may be enabled
again. If the po…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.3
cmgDsuDataFormat obsolete
Data format (channel rate) of this DSU.
Enumerationr/w
Enumerated Values:
1rate56Kbps
2rate64KbpsClear
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.4
cmgDsuFlowControl obsolete
Specifies the conditions under which this DSU will send all ones to
indicate data port not ready.

dtr-rts(1) Monitor both DTR and RTS as described below. If either
is interrupted, send all ones.
…
Enumerationr/w
Enumerated Values:
1dtr-rts
2dtr
3rts
4disable
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.5
cmgDsuYellowAlarmAction obsolete
Specifies the action to take when a yellow alarm is received on
the network interface.

noAction(1) Ignore yellow alarms.

halt(2) Stop transmission and disable the data port. Send all ones
…
Enumerationr/w
Enumerated Values:
1noAction
2halt
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.6
cmgDsuReceiveClock obsolete
Specifies whether data received from the data port is clocked using
the DSU internal clock or by an external clock provided by the DTE
connected to the port. When an external clock is used, it must be
synchronized to t…
Enumerationr/w
Enumerated Values:
1internal
2external
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.7
cmgDsuInvertTxC obsolete
Specifies whether the clock supplied by the DSU/CSU on the TXC
interchange circuit DB (CCITT 114) is phase inverted with respect
to the Transmitted Data interchange ciucuit BA (CCITT 103). This
option is useful when lo…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.8
cmgDsuInvertRxC obsolete
Specifies whether the receive clock supplied by the DSU/CSU or
DTE is phase inverted.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9
cmgDsuInvertTxD obsolete
Specifies whether the transmitted data stream is logically inverted
before being transmitted. This option is useful for applications
where HDLC data is being transported. Inverting the data ensures
that the density re…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.10
cmgDsuInvertRxD obsolete
Specifies whether the received data stream is logically inverted.
This option is useful for applications where HDLC data is being
transported. Inverting the data ensures that the density
requirements for the network in…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.11
cmgDsuPortInitiatedLoopback obsolete
Specifies whether the DSU should accept loopback requests from
the DTE port. The local DTE can send an LL or RL signal to the
T1/E1 media module in the EIA-530A interface. The LL signal causes
the module to activate a…
Enumerationr/w
Enumerated Values:
1allow
2disallow
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.12
cmgDsuNetworkInitiatedLoopback obsolete
Specifies whether the DSU should accept in-band loopback requests
from the far end, that is, a DSU across the network.
Enumerationr/w
Enumerated Values:
1allow
2disallow
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.13
cmgDsuChannelAssignments obsolete
Specifies which channels are assigned to Voice and which to the DSU.
Each bit represents one channel. If the bit is set to 1, the channel
is assigned to the DSU; otherwise it is assigned to Voice. The
channel number o…
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.14
cmgDsuDataRate obsolete
Data format (channel rate) of this DSU times the number of channels
of type ds0-dsu-channel(5). See cmgChType in cmgChannelTable.
Integer32
Constraints:
range: 0-2048
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.15

cmgDsuPortStatusTable

table obsolete
.1.3.6.1.4.1.6889.2.9.1.1.11.2.2 · 1 row entry · 13 columns
Open in standard view 
Status of E1/T1 DSUs in this media gateway.
cmgDsuPortStatusEntry entry .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1
An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.
Indexes
cmgDsuSlot cmgDsuPort
Column Syntax OID
cmgDsuRTS obsolete
State of request-to-send signal from the DTE to the DSU.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.1
cmgDsuDTR obsolete
State of data-terminal-ready signal from the DTE to the DSU.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.2
cmgDsuLL obsolete
Is there a DTE local loopback active between the DTE and the DSU?
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.3
cmgDsuRL obsolete
Is there a remote loopback active in the FPGA?
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.4
cmgDsuRLSD obsolete
State of the Receive Line Signal Detect from the DSU to the DTE.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.5
cmgDsuCTS obsolete
State of clear-to-send signal from the DSU to the DTE.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.6
cmgDsuDSR obsolete
State of data-set-ready signal from the DCE to the DTE.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.7
cmgDsuRing obsolete
State of the DCE ring indicator signal to the DTE.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.8
cmgDsuTestMode obsolete
Indicates whether tests are currently in progress.
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.9
cmgDsuTxD obsolete
State of data transmission from the synchronous DTE to the
data port on the DSU.
Enumeration
Enumerated Values:
1mark
2space
3cycling
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.10
cmgDsuRxD obsolete
State of data reception at the synchronous DTE from the
data port on the DSU/CSU.
Enumeration
Enumerated Values:
1mark
2space
3cycling
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.11
cmgDsuFaultMask obsolete
Each bit of this value set to '1' indicates a specific fault
in this DSU.

Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
…
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.12
cmgDsuStatusMask obsolete
Each bit of this value set to '1' indicates a specific status
condition in this DSU, or a fault or status condition in its
associated CSU.

Octets are numbered in the order in which they appear in the PDU.…
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.13

cmgDsuTestTable

table obsolete
.1.3.6.1.4.1.6889.2.9.1.1.11.2.3 · 1 row entry · 7 columns
Open in standard view 
Loopback tests in effect on DSUs in this media gateway.
cmgDsuTestEntry entry .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1
An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.
Indexes
cmgDsuSlot cmgDsuPort
Column Syntax OID
cmgDsuLoopbackPattern obsolete
Specifies the pattern to be sent during a loopback test.
allZeroes(1) is most often used to verify B8ZS line encoding.
allOnes(2) is most often used to measure signal power.
oneZeroOne(3) alternates ones and zeroes. It…
Enumeration
Enumerated Values:
1allZeroes
2allOnes
3oneZeroOne
4oneIn5
5oneIn8
6threeIn24
7qrs
8qrs511
9qrs2047
255none
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.1
cmgDsuLocalDteLoopback obsolete
Indicates whether a Local DTE loopback is active, in which
a signal received from the DTE is looped back after passing
through the transceivers, but before passing through the FIFOs.
This loopback can be activated by th…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.2
cmgDsuNearEndDataChannelLoopback obsolete
Indicates whether a Near-end Data Channel loopback is active,
in which a signal received from the CSU is looped back after
passing through the FIFOs but before entering the transceivers.
This loopback was activated by t…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.3
cmgDsuFarEndDataChannelLoopback obsolete
Indicates whether a Far-end Data Channel loopback is active.
This is functionally equivalent to the Near-end Data Channel
loopback, except that this loopback was activated by the far
end, that is, a DSU across the netwo…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.4
cmgDsuRemoteLoopback obsolete
Indicates whether a Remote loopback is active, in which a
signal received from the CSU is looped back before entering
the FIFOs. This loopback may have been activated by either
the near end (this DSU) or the far end (a…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.5
cmgDsuDataTerminalLoopback obsolete
Indicates whether a Data Terminal loopback is active, in which
a signal received from the DTE is looped back after passing
through the FIFOs. This loopback can only be activated by the
near end, that is, this DSU.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.6
cmgDsuReset obsolete
Set to on(1) to request reinitialization of the DSU.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.7

cmgAnalogPortTable

table
.1.3.6.1.4.1.6889.2.9.1.1.12.1 · 1 row entry · 8 columns
Open in standard view 
Table of analog ports in this media gateway.
cmgAnalogPortEntry entry .1.3.6.1.4.1.6889.2.9.1.1.12.1.1
An entry in the table, representing a single analog port.
Indexes
cmgAnalogSlot cmgAnalogPort
Column Syntax OID
cmgAnalogSlot
Slot number of this analog port.
Integer32
Constraints:
range: 1-9
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.1
cmgAnalogPort
Port number of this analog port.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.2
cmgAnalogEchoCancellerControl
The echo canceller control setting for this analog port.
auto means that the system will enable or disable the echo
canceller as appropriate for each call.
fixedOn indicates that the analog firmware always enables
the e…
Enumerationr/w
Enumerated Values:
0auto
1on
2off
3fixedOn
4notSupported
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.3
cmgAnalogEchoCancellerConfig1
Echo canceller configuration setting for this analog port (byte 1 of 2).
This value is not writeable if cmgAnalogEchoCancellerControl
is fixedOn(3) or notSupported(4).
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.4
cmgAnalogEchoCancellerConfig2
Echo canceller configuration setting for this analog port (byte 2 of 2).
This value is not writeable if cmgAnalogEchoCancellerControl
is fixedOn(3) or notSupported(4).
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.5
cmgAnalogBalance
Balance index.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.6
cmgAnalogReceiveGain
The receive gain multiplied by 100, for instance -123 indicates -1.23dB.
Integer32r/w
Constraints:
range: -600-300
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.7
cmgAnalogTransmitGain
The transmit gain multiplied by 100, for instance +287 indicates 2.87dB.
Integer32r/w
Constraints:
range: -600-300
 .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.8

cmgExpansionUnitsTable

table
.1.3.6.1.4.1.6889.2.9.1.1.13.1 · 1 row entry · 8 columns
Open in standard view 
Table of Expansion Units connected to this media gateway.
cmgExpansions entry .1.3.6.1.4.1.6889.2.9.1.1.13.1.1
An entry in the table, representing a single Expansion Unit.
Indexes
cmgExpansionSlot
Column Syntax OID
cmgExpansionSlot
Expansion Unit Slot.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.1
cmgExpansionModelNumber
Expansion Unit model.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.2
cmgExpansionDescription
Expansion Unit description.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.3
cmgExpansionSerialNumber
Expansion Unit serial number.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.4
cmgExpansionHWVintage
Expansion Unit HW vintage.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.5
cmgExpansionHWSuffix
Expansion Unit HW suffix.
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.6
cmgExpansionDemandTest
When set to on(1), activates on demand test for the Expansion Unit.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.7
cmgExpansionDemandTestResult
Result of the on demand test for the Expansion Unit.
Failure(1) may be the result of a disconnected or bad cable.
Enumeration
Enumerated Values:
1fail
255pass
 .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.8

cmgVoipEngineTable

table
.1.3.6.1.4.1.6889.2.9.1.4.5 · 1 row entry · 18 columns
Open in standard view 
Table of VoIP engines in the media gateway.
cmgVoipEngineEntry entry .1.3.6.1.4.1.6889.2.9.1.4.5.1
An entry in the table representing one VoIP engine.
Indexes
cmgVoipSlot
Column Syntax OID
cmgVoipSlot
Location of this VoIP engine, either a media module slot (1-4 for G700) or
the motherboard (100 for G700, 10 for G350, G250).
For G450/G430 the index arrangement is as follows:
* For V1 - V10 the rule is cmgVoIPSlot = …
Integer32
Constraints:
range: 1-104
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.1
cmgVoipMACAddress
MAC address of the component hosting this VoIP engine.
OctetString
Constraints:
range: 0-6
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.2
cmgVoipStaticIpAddress
Administered static IPv4 Address of this VoIP engine. If
cmgVoipEngineUseDhcp was off(2) at startup time, this value
determined the current IPv4 address of the engine.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.3
cmgVoipCurrentIpAddress
IPv4 Address currently in use at this VoIP engine. If
cmgVoipEngineUseDhcp was on(2) at startup time, this value
was received from the DHCP server. Otherwise it is equal to
cmgVoipStaticIpAddress at startup time.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.4
cmgVoipJitterBufferSize
Size in bytes of the dynamic jitter buffer at this VoIP engine.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.5
cmgVoipTotalChannels
Total channels available to this VoIP engine.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.6
cmgVoipChannelsInUse
Number of channels in use at this VoIP engine.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.7
cmgVoipAverageOccupancy
5-minute average occupancy of this VoIP engine.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.8
cmgVoipHyperactivity
Indicates whether hyperactivity has been detected by this VoIP engine.
Enumeration
Enumerated Values:
1normal
2hyperactive
255unknown
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.9
cmgVoipAdminState
Maintenance busy-out state of this VoIP engine.
Enumeration
Enumerated Values:
1busy-out
2release
3camp-on
255unknown
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.10
cmgVoipDspFWVersion
Firmware version of the DSP complex on this VoIP engine. This is
also available in the Load MIB.
OctetString
Constraints:
range: 0-9
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.11
cmgVoipDspStatus
Status of the DSP complex on this VoIP engine.
Enumeration
Enumerated Values:
1idle
2inUse
3fault
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.12
cmgVoipEngineReset
Setting the value of this attribute to ON is interpreted as
a reset command for the VoIP engine. It initiates a complete
reinitialisation of the VoIP engine.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.13
cmgVoipFaultMask
Each bit of this value set to '1' indicates a specific fault
in the VoIP engine.

Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit …
OctetString
Constraints:
range: 0-2
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.14
cmgVoipStaticInetAddressType
Administered static IPv6 Address Type of the VoIP engine. The VoIP Engine Processor
can have two IP addresses: one IPv4 and the second IPv6. cmgVoipStaticIpAddress
presents the IPv4 address and this MIB item presents t…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.15
cmgVoipStaticInetAddress
Administered static IPv6 Address of the VoIP engine.
1. The address type of this object is specified in
cmgVoipStaticInetAddressType.
2. Default of cmgVoipStaticInetAddressType is unknown(0) and
cmgVoipStaticInetA…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.16
cmgVoipCurrentInetAddressType
IPv6 Address Type currently in use at this VoIP engine. The VoIP Engine Processor
can have two IP address one IPv4 and the second IPv6. cmgVoipCurrentIpAddress presents the IPv4
address and this MIB item presents the I…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.17
cmgVoipCurrentInetAddress
IPv6 Address currently in use at this VoIP engine.
1. The address type of this object is specified in
cmgVoipCurrentInetAddressType.
2. Default of cmgVoipCurrentInetAddressType is unknown(0) and
cmgVoipCurrentInet…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6889.2.9.1.4.5.1.18

cmgVoipDSPCoreTable

table
.1.3.6.1.4.1.6889.2.9.1.4.6 · 1 row entry · 7 columns
Open in standard view 
Table representing the DSP cores in VoIP engine of the media gateway.
cmgVoipDSPCoreEntry entry .1.3.6.1.4.1.6889.2.9.1.4.6.1
An entry in the table representing one DSP Core of a VoIP engine.
This table uses an external index from cmgVoIPEngineTable
which selects a DSP SoDIMM/engine module and secondary index
cmgDSPVoIPCoreID that selects a …
Indexes
cmgVoipSlot cmgDSPCoreCoreId
Column Syntax OID
cmgDSPCoreCoreId
The DSP core ID within the specific DSP VoIP engine.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.1
cmgDSPCoreTotalChannels
Total channels available to this DSP core.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.2
cmgDSPCoreChannelsInUse
Number of channels in use at this DSP core.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.3
cmgDSPCoreAdminState
Maintenance busy-out state of this DSP core.
Enumerationr/w
Enumerated Values:
1busy-out
2release
3camp-on
255unknown
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.4
cmgDSPCoreStatus
Status of the DSP Core.
Enumeration
Enumerated Values:
1idle
2inUse
3fault
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.5
cmgDSPCoreDemandTest
Activates on demand test for the DSP Core.
Enumerationr/w
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.6
cmgDSPCoreDemandTestResult
Result of the on demand test for the DSP Core.
Enumeration
Enumerated Values:
1errorCode1
2errorCode2
3errorCode3
4errorCode4
5errorCode5
6errorCode6
7notResponding
255pass
 .1.3.6.1.4.1.6889.2.9.1.4.6.1.7

cmgTrapManagerTable

table
.1.3.6.1.4.1.6889.2.9.1.5.1 · 1 row entry · 4 columns
Open in standard view 
Table of trap receivers in this media gateway.
cmgTrapManagerEntry entry .1.3.6.1.4.1.6889.2.9.1.5.1.1
An entry in the table, representing a single trap receiver.
Indexes
cmgTrapManagerAddress
Column Syntax OID
cmgTrapManagerAddress
IP address of this trap receiver.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.6889.2.9.1.5.1.1.1
cmgTrapManagerControl
Specifies whether this trap receiver is currently receiving traps.
Enumerationr/w
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.6889.2.9.1.5.1.1.3
cmgTrapManagerMask
A bit mask indicating the trap categories of interest
to this trap receiver.
Bit Category
0 Power warnings
1 Fan and temperature warnings
2 Application faults
3 Module insert or remove
4 Configuration traps: port enable…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.6889.2.9.1.5.1.1.4
cmgTrapManagerRowStatus
The status of this entry in the table. Available states:
active(1), -- Trap receiver is administered, though not
-- necessarily active.
createAndGo(4), -- Used to add a new receiver to the table.
destroy(6) -- Used t…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.6889.2.9.1.5.1.1.5

cmgContactClosuresTable

table
.1.3.6.1.4.1.6889.2.9.1.6.1 · 1 row entry · 6 columns
Open in standard view 
This table is used for managing contact closure adjunct port. 
The adjunct box contains two relays.
cmgContactClosuresEntry entry .1.3.6.1.4.1.6889.2.9.1.6.1.1
Indexes
cmgCcModule cmgCcPort cmgCcRelay
Column Syntax OID
cmgCcModule Integer32
Constraints:
range: 10-10
 .1.3.6.1.4.1.6889.2.9.1.6.1.1.1
cmgCcPort Integer32
Constraints:
range: 1-1
 .1.3.6.1.4.1.6889.2.9.1.6.1.1.2
cmgCcRelay
Each contact closure port can control two relays on the adjunct
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.6889.2.9.1.6.1.1.3
cmgCcAdminState
The admin state of the contact-closure where:
Auto(1): The Contact Closure is controlled by the call
Controller.
Trigger(2): The contact closure relay is triggered.
Off(3): The contact closure relay is off (not triggere…
Enumerationr/w
Enumerated Values:
1auto
2manualTrigger
3manualOff
 .1.3.6.1.4.1.6889.2.9.1.6.1.1.4
cmgCcPulseDuration
The number of second the relay is triggred after each pulse activation
signal is received from the call-controller.
Integer32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.6889.2.9.1.6.1.1.5
cmgCcStatus
The actual contact closure relay state
Enumeration
Enumerated Values:
1triggered
2off
 .1.3.6.1.4.1.6889.2.9.1.6.1.1.6

cmgETRTable

table
.1.3.6.1.4.1.6889.2.9.1.7.1 · 1 row entry · 5 columns
Open in standard view 
Emergency Transfer Function Table (short circuit             
Line and Trunk ports in case of call-controller connectivity
problems)
cmgETREntry entry .1.3.6.1.4.1.6889.2.9.1.7.1.1
Indexes
cmgEtrModule
Column Syntax OID
cmgEtrModule
Module number - 10 on G450
Integer32
Constraints:
range: 1-10
 .1.3.6.1.4.1.6889.2.9.1.7.1.1.1
cmgEtrAdminState
Module's ETR administration state where:
off(1): ETR is turned off without checking if there
is an active call among trunk-line port pairs

auto(2): ETR is turned off as soon as the module is
operati…
Enumerationr/w
Enumerated Values:
1auto
2on
3off
 .1.3.6.1.4.1.6889.2.9.1.7.1.1.2
cmgEtrNumberOfPairs
The number of ETR TRUNK-LINE pairs
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.6889.2.9.1.7.1.1.3
cmgEtrStatus
The current status of the ETR function
Enumeration
Enumerated Values:
1on
2off
 .1.3.6.1.4.1.6889.2.9.1.7.1.1.4
cmgEtrCurrentLoopDetect
Each bit in the bit-mask represents a current-loop-detector of one
trunk-line ETR pairs. The bit is set when current is detected
OctetStringr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.6889.2.9.1.7.1.1.5