cmgDsuInvertRxC
G700-MG-MIB ·
.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9
Object
column
obsolete
r/w
Enumeration
Specifies whether the receive clock supplied by the DSU/CSU or DTE is phase inverted.
Context
- MIB
- G700-MG-MIB
- OID
.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- cmgDsuConfigEntry
- Table
- cmgDsuConfigTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmgDsuSlot obsolete Slot number of this DSU. | column | Integer32 | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1 |
| cmgDsuInvertTxD obsolete Specifies whether the transmitted data stream is logically inverted
before being transmitted. This option is useful for applications
where HDLC data is being transported. Invert… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.10 |
| cmgDsuInvertRxD obsolete Specifies whether the received data stream is logically inverted.
This option is useful for applications where HDLC data is being
transported. Inverting the data ensures that the… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.11 |
| cmgDsuPortInitiatedLoopback obsolete Specifies whether the DSU should accept loopback requests from
the DTE port. The local DTE can send an LL or RL signal to the
T1/E1 media module in the EIA-530A interface. The L… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.12 |
| cmgDsuNetworkInitiatedLoopback obsolete Specifies whether the DSU should accept in-band loopback requests
from the far end, that is, a DSU across the network. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.13 |
| cmgDsuChannelAssignments obsolete Specifies which channels are assigned to Voice and which to the DSU.
Each bit represents one channel. If the bit is set to 1, the channel
is assigned to the DSU; otherwise it is … | column | OctetString | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.14 |
| cmgDsuDataRate obsolete Data format (channel rate) of this DSU times the number of channels
of type ds0-dsu-channel(5). See cmgChType in cmgChannelTable. | column | Integer32 | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.15 |
| cmgDsuPort obsolete Port number of this DSU. | column | Integer32 | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2 |
| cmgDsuPortEnable obsolete This object allows a user to take the E1/T1 port out of service for
administration. During administration, it may be in an inconsistent
state. When administration is complete, t… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.3 |
| cmgDsuDataFormat obsolete Data format (channel rate) of this DSU. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.4 |
| cmgDsuFlowControl obsolete Specifies the conditions under which this DSU will send all ones to
indicate data port not ready.
dtr-rts(1) Monitor both DTR and RTS as described below. If either… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.5 |
| cmgDsuYellowAlarmAction obsolete Specifies the action to take when a yellow alarm is received on
the network interface.
noAction(1) Ignore yellow alarms.
halt(2) Stop transmission an… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.6 |
| cmgDsuReceiveClock obsolete Specifies whether data received from the data port is clocked using
the DSU internal clock or by an external clock provided by the DTE
connected to the port. When an external clo… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.7 |
| cmgDsuInvertTxC obsolete Specifies whether the clock supplied by the DSU/CSU on the TXC
interchange circuit DB (CCITT 114) is phase inverted with respect
to the Transmitted Data interchange ciucuit BA (CC… | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.8 |