cmgDsuFaultMask
G700-MG-MIB ·
.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.12
Object
column
obsolete
OctetString
Each bit of this value set to '1' indicates a specific fault
in this DSU.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Cajun Octet Octet
bit# bit# value Meaning
----- ----- ----- -------
0 0/0 0x80 DSU FPGA configuration failure.
1 0/1 0x40 DSU automatic reset.
2-3 0/2-3 Unused.
4 0/4 0x08 DSU DTE DTR off - DTE is disconnected or not functioning.
5 0/5 0x04 DSU DTE RTS off - DTE is not sending data.
6 0/6 0x02 DSU TxD failure - data received from DTE is all zeroes or
all ones.
7 0/7 0x01 DSU RxD failure - data received from far end is all zeroes or
all ones.
8-15 1/0-7 Unused.
Context
- MIB
- G700-MG-MIB
- OID
.1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.12- Type
- column
- Access
- readonly
- Status
- obsolete
- Parent
- cmgDsuPortStatusEntry
- Table
- cmgDsuPortStatusTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmgDsuRTS obsolete State of request-to-send signal from the DTE to the DSU. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.1 |
| cmgDsuTxD obsolete State of data transmission from the synchronous DTE to the
data port on the DSU. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.10 |
| cmgDsuRxD obsolete State of data reception at the synchronous DTE from the
data port on the DSU/CSU. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.11 |
| cmgDsuStatusMask obsolete Each bit of this value set to '1' indicates a specific status
condition in this DSU, or a fault or status condition in its
associated CSU.
Octets are numbered in th… | column | OctetString | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.13 |
| cmgDsuDTR obsolete State of data-terminal-ready signal from the DTE to the DSU. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.2 |
| cmgDsuLL obsolete Is there a DTE local loopback active between the DTE and the DSU? | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.3 |
| cmgDsuRL obsolete Is there a remote loopback active in the FPGA? | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.4 |
| cmgDsuRLSD obsolete State of the Receive Line Signal Detect from the DSU to the DTE. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.5 |
| cmgDsuCTS obsolete State of clear-to-send signal from the DSU to the DTE. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.6 |
| cmgDsuDSR obsolete State of data-set-ready signal from the DCE to the DTE. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.7 |
| cmgDsuRing obsolete State of the DCE ring indicator signal to the DTE. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.8 |
| cmgDsuTestMode obsolete Indicates whether tests are currently in progress. | column | Enumeration | .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.9 |