cmgDsuConfigEntry

G700-MG-MIB · .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1

MIB view Table view

Object

row obsolete

An entry in the table, representing the configuration of one DSU
on a T1/E1 media module.

Context

MIB: G700-MG-MIB
OID: .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1
Type: row
Status: obsolete
Parent: cmgDsuConfigTable
Table: cmgDsuConfigTable
Children: 15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
cmgDsuSlot obsolete Slot number of this DSU.	column	Integer32	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1`
cmgDsuInvertTxD obsolete Specifies whether the transmitted data stream is logically inverted before being transmitted. This option is useful for applications where HDLC data is being transported. Invert…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.10`
cmgDsuInvertRxD obsolete Specifies whether the received data stream is logically inverted. This option is useful for applications where HDLC data is being transported. Inverting the data ensures that the…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.11`
cmgDsuPortInitiatedLoopback obsolete Specifies whether the DSU should accept loopback requests from the DTE port. The local DTE can send an LL or RL signal to the T1/E1 media module in the EIA-530A interface. The L…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.12`
cmgDsuNetworkInitiatedLoopback obsolete Specifies whether the DSU should accept in-band loopback requests from the far end, that is, a DSU across the network.	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.13`
cmgDsuChannelAssignments obsolete Specifies which channels are assigned to Voice and which to the DSU. Each bit represents one channel. If the bit is set to 1, the channel is assigned to the DSU; otherwise it is …	column	OctetString	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.14`
cmgDsuDataRate obsolete Data format (channel rate) of this DSU times the number of channels of type ds0-dsu-channel(5). See cmgChType in cmgChannelTable.	column	Integer32	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.15`
cmgDsuPort obsolete Port number of this DSU.	column	Integer32	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2`
cmgDsuPortEnable obsolete This object allows a user to take the E1/T1 port out of service for administration. During administration, it may be in an inconsistent state. When administration is complete, t…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.3`
cmgDsuDataFormat obsolete Data format (channel rate) of this DSU.	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.4`
cmgDsuFlowControl obsolete Specifies the conditions under which this DSU will send all ones to indicate data port not ready. dtr-rts(1) Monitor both DTR and RTS as described below. If either…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.5`
cmgDsuYellowAlarmAction obsolete Specifies the action to take when a yellow alarm is received on the network interface. noAction(1) Ignore yellow alarms. halt(2) Stop transmission an…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.6`
cmgDsuReceiveClock obsolete Specifies whether data received from the data port is clocked using the DSU internal clock or by an external clock provided by the DTE connected to the port. When an external clo…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.7`
cmgDsuInvertTxC obsolete Specifies whether the clock supplied by the DSU/CSU on the TXC interchange circuit DB (CCITT 114) is phase inverted with respect to the Transmitted Data interchange ciucuit BA (CC…	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.8`
cmgDsuInvertRxC obsolete Specifies whether the receive clock supplied by the DSU/CSU or DTE is phase inverted.	column	Enumeration	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9`

Indexes

Object	Type	Syntax	OID
cmgDsuSlot obsolete Slot number of this DSU.	column	Integer32	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1`
cmgDsuPort obsolete Port number of this DSU.	column	Integer32	`.1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2`