ALCATEL-IND1-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

943

alaQoSRuleTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1 · 1 row entry · 34 columns

Open in standard view

Table of QoS Rule definitions

alaQoSRuleEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1

Definition of QoS Rule

Indexes

alaQoSRuleName

Column Syntax OID

alaQoSRuleName

Name of rule

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.1

alaQoSRuleEnabled

Is this rule enabled or not

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.2

alaQoSRuleSource

What entity created the rule.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.3

alaQoSRulePrecedence

Precedence value for rule.
Rules are evaluated from higher precedence to lower.
If rules have equal precedence, they are evaluated in
the order they are received.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.4

alaQoSRuleCondition

Name of the condition to use

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.5

alaQoSRuleAction

Name of the action to use

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.6

alaQoSRuleReflexive

Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.7

alaQoSRuleSave

Indicator to tell whether to write out the rule during
snapshot commands.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.8

alaQoSRuleLog

Indicator to tell whether to log matches to this rule
in the QoS log.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.9

alaQoSRuleMatches

Number of times this rule has been matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.10

alaQoSRuleEnforced

Is this rule currenly being enforced on the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.11

alaQoSRuleActive

Is this rule enforcable by the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.12

alaQoSRuleRowStatus

Used to create/delete rules according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.13

alaQoSRuleValidityPeriod

Name of the validity period to use

OctetStringr/w

Enumerated Values:

1	version1
2	version2

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.14

alaQoSRuleValidityPeriodStatus

Status field indicating whether there is a validity period
associated with this rule

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.15

alaQoSRuleLogInterval

How often to look for packets matching this rule when logging.
When 0 log as many as possible.

Integer32r/w

Constraints:
range: 1-25
range: 0-3600

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.16

alaQoSRuleCountType

Which rule statistics counters to update if not all are available

Enumerationr/w

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.17

alaQoSRulePacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.18

alaQoSRuleByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.19

alaQoSRuleExcessPacketCount

Counter for packets out of bandwidth parameters

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.20

alaQoSRuleExcessByteCount

Counter for bytes out of bandwidth parameters

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.21

alaQoSRuleType

The type of rule this is. Each bit represents the following:
0x1 = bridged
0x2 = routed
0x4 = multicast

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.22

alaQoSRuleTrapEvents

Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked?

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.23

alaQoSRuleDefaultList

This rule belongs to the default policy list.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.24

alaQoSRuleGreenCount

Counter for the number of packets being green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.25

alaQoSRuleYellowCount

Counter for the number of packets being yellow compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.26

alaQoSRuleRedCount

Counter for the number of packets being red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.27

alaQoSRuleNonGreenCount

Counter for the number of packets being non-green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.28

alaQoSRuleNonRedCount

Counter for the number of packets being non-red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.29

alaQoSRuleAccounting

Flag for enabling/disbling the accounting mode.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.30

alaQoSRulePacketRate

Shows the packet per second rate

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.31

alaQoSRuleAccPacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.32

alaQoSRuleAccByteCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.33

alaQoSRuleBitRate

Shows the Bits per second rate

SNMPv2-SMICounter64

Constraints:
range: 1-4094

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.34

alaQoSAppliedRuleTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2 · 1 row entry · 34 columns

Open in standard view

Table of QoS AppliedRule definitions

alaQoSAppliedRuleEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1

Definition of QoS AppliedRule

Indexes

alaQoSAppliedRuleName

Column Syntax OID

alaQoSAppliedRuleName

Name of rule

OctetString

Enumerated Values:

1	include
2	exclude

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.1

alaQoSAppliedRuleEnabled

Is this rule enabled or not

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.2

alaQoSAppliedRuleSource

What entity created the rule.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.3

alaQoSAppliedRulePrecedence

Precedence value for rule.
Rules are evaluated from higher precedence to lower.
If rules have equal precedence, they are evaluated in
the order they are received.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.4

alaQoSAppliedRuleCondition

Name of the condition to use

OctetString

Constraints:
range: 1-4094
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.5

alaQoSAppliedRuleAction

Name of the action to use

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.6

alaQoSAppliedRuleReflexive

Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.7

alaQoSAppliedRuleSave

Indicator to tell whether to write out the rule during
snapshot commands.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.8

alaQoSAppliedRuleLog

Indicator to tell whether to log matches to this rule
in the QoS log.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.9

alaQoSAppliedRuleMatches

Number of times this rule has been matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.10

alaQoSAppliedRuleEnforced

Is this rule currenly being enforced on the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.11

alaQoSAppliedRuleActive

Is this rule enforcable by the switch.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.12

alaQoSAppliedRuleRowStatus

Used to create/delete rules according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.13

alaQoSAppliedRuleValidityPeriod

Name of the validity period to use

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.14

alaQoSAppliedRuleValidityPeriodStatus

Status field indicating whether there is a validity period
associated with this rule

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.15

alaQoSAppliedRuleLogInterval

How often to look for packets matching this rule when logging.
When 0 log as many as possible.

Integer32

Constraints:
range: 0-3600

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.16

alaQoSAppliedRuleCountType

Which rule statistics counters to update if not all are available

Enumeration

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.17

alaQoSAppliedRulePacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.18

alaQoSAppliedRuleByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.19

alaQoSAppliedRuleExcessPacketCount

Counter for packets out of bandwidth parameters

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.20

alaQoSAppliedRuleExcessByteCount

Counter for bytes out of bandwidth parameters

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.21

alaQoSAppliedRuleType

The type of rule this is. Each bit represents the following:
0x1 = bridged
0x2 = routed
0x4 = multicast

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.22

alaQoSAppliedRuleTrapEvents

Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked?

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.23

alaQoSAppliedRuleDefaultList

This rule belongs to the default policy list.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.24

alaQoSAppliedRuleGreenCount

Counter for the number of packets being green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.25

alaQoSAppliedRuleYellowCount

Counter for the number of packets being yellow compliant.

SNMPv2-SMICounter64

Constraints:
range: 1-65535

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.26

alaQoSAppliedRuleRedCount

Counter for the number of packets being red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.27

alaQoSAppliedRuleNonGreenCount

Counter for the number of packets being non-green compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.28

alaQoSAppliedRuleNonRedCount

Counter for the number of packets being non-red compliant.

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.29

alaQoSAppliedRuleAccounting

Flag for enabling/disabling the accounting mode.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.30

alaQoSAppliedRulePacketRate

Shows the packet per second rate

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.31

alaQoSAppliedRuleAccPacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.32

alaQoSAppliedRuleAccByteCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.33

alaQoSAppliedRuleBitRate

Shows the Bits per second rate

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.34

alaQoSConditionTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3 · 1 row entry · 124 columns

Open in standard view

Table of QoS Condition definitions

alaQoSConditionEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1

Definition of QoS Condition

Indexes

alaQoSConditionName

Column Syntax OID

alaQoSConditionName

Name of condition

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.1

alaQoSConditionSource

What entity created the condition.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.2

alaQoSConditionSourceSlot

Source physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.3

alaQoSConditionSourceSlotStatus

Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.4

alaQoSConditionSourcePort

Source physical port range start to use for
traffic classification

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.5

alaQoSConditionSourcePortGroup

Source physical port group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.6

alaQoSConditionSourcePortGroupStatus

Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.7

alaQoSConditionDestinationSlot

Destination physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.8

alaQoSConditionDestinationSlotStatus

Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.9

alaQoSConditionDestinationPort

Destination physical port range start to use for traffic
classification

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.10

alaQoSConditionDestinationPortGroup

Destination physical port group to use for traffic
classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.11

alaQoSConditionDestinationPortGroupStatus

Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.12

alaQoSConditionSourceInterfaceType

Source physical interface type to use for traffic
classification

Enumerationr/w

Enumerated Values:

1	ethernet
2	wan
3	ethernet10
4	ethernet100
5	ethernet1G
6	ethernet10G
7	aggregate

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.13

alaQoSConditionSourceInterfaceTypeStatus

Status field indicating whether the source physical
interface type needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.14

alaQoSConditionDestinationInterfaceType

Destination physical interface type to use for traffic
classification

Enumerationr/w

Enumerated Values:

1	ethernet
2	wan
3	ethernet10
4	ethernet100
5	ethernet1G
6	ethernet10G
7	aggregate

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.15

alaQoSConditionDestinationInterfaceTypeStatus

Status field indicating whether the destination physical
interface type needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.16

alaQoSConditionSourceMacAddr

Source MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.17

alaQoSConditionSourceMacAddrStatus

Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.18

alaQoSConditionSourceMacMask

Source MAC mask to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.19

alaQoSConditionSourceMacGroup

Source MAC group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.20

alaQoSConditionSourceMacGroupStatus

Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.21

alaQoSConditionDestinationMacAddr

Destination MAC address to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.22

alaQoSConditionDestinationMacAddrStatus

Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.23

alaQoSConditionDestinationMacMask

Destination MAC mask to use for traffic classification

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.24

alaQoSConditionDestinationMacGroup

Destination MAC group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.25

alaQoSConditionDestinationMacGroupStatus

Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.26

alaQoSConditionSourceVlan

Source VLAN to use for traffic classification

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.27

alaQoSConditionSourceVlanStatus

Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.28

alaQoSConditionDestinationVlan

Destination VLAN to use for traffic classification

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.29

alaQoSConditionDestinationVlanStatus

Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.30

alaQoSCondition8021p

802.1p value to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.31

alaQoSCondition8021pStatus

Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.32

alaQoSConditionSourceIpAddr

Source IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.33

alaQoSConditionSourceIpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.34

alaQoSConditionSourceIpMask

Source IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.35

alaQoSConditionSourceNetworkGroup

Source network group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.36

alaQoSConditionSourceNetworkGroupStatus

Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.37

alaQoSConditionDestinationIpAddr

Destination IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.38

alaQoSConditionDestinationIpAddrStatus

Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.39

alaQoSConditionDestinationIpMask

Destination IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.40

alaQoSConditionDestinationNetworkGroup

Destination network group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.41

alaQoSConditionDestinationNetworkGroupStatus

Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.42

alaQoSConditionMulticastIpAddr

Multicast IP address to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.43

alaQoSConditionMulticastIpAddrStatus

Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.44

alaQoSConditionMulticastIpMask

Multicast IP mask to use for traffic classification

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.45

alaQoSConditionMulticastNetworkGroup

Multicast network group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.46

alaQoSConditionMulticastNetworkGroupStatus

Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.47

alaQoSConditionTos

TOS value to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.48

alaQoSConditionTosStatus

Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.49

alaQoSConditionTosMask

TOS mask to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.50

alaQoSConditionDscp

DSCP value to use for traffic classification

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.51

alaQoSConditionDscpStatus

Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.52

alaQoSConditionDscpMask

DSCP mask to use for traffic classification

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.53

alaQoSConditionIpProtocol

IP protocol to use for traffic classification.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.54

alaQoSConditionIpProtocolStatus

Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.55

alaQoSConditionSourceIpPort

Source IP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.56

alaQoSConditionSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.57

alaQoSConditionDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.58

alaQoSConditionDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.59

alaQoSConditionService

Name of service to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.60

alaQoSConditionServiceStatus

Status field indicating whether the service
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.61

alaQoSConditionServiceGroup

Name of service group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.62

alaQoSConditionServiceGroupStatus

Status field indicating whether the service group
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.63

alaQoSConditionIcmpType

ICMP type to use for traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.64

alaQoSConditionIcmpTypeStatus

Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.65

alaQoSConditionIcmpCode

ICMP code to use for traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.66

alaQoSConditionIcmpCodeStatus

Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.67

alaQoSConditionDlci

DLCI to use to traffic classification

Integer32r/w

Constraints:
range: 0-512

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.68

alaQoSConditionDlciStatus

Status field indicating whether the DLCI
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.69

alaQoSConditionRowStatus

Used to create/delete conditions according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.70

alaQoSConditionSourcePortEnd

Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port.

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.71

alaQoSConditionDestinationPortEnd

Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port.

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.72

alaQoSConditionSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.73

alaQoSConditionDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.74

alaQoSConditionSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.75

alaQoSConditionSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.76

alaQoSConditionSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.77

alaQoSConditionDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.78

alaQoSConditionDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.79

alaQoSConditionDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.80

alaQoSConditionSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.81

alaQoSConditionSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.82

alaQoSConditionSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83

alaQoSConditionDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.84

alaQoSConditionDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.85

alaQoSConditionDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.86

alaQoSConditionEthertype

Ethertype value to use for traffic classification

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.87

alaQoSConditionEthertypeStatus

Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.88

alaQoSConditionTcpFlags

Use any/all specifieid TCP flags for traffic classification

Enumerationr/w

Enumerated Values:

1	all
2	any

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.89

alaQoSConditionTcpFlagsStatus

Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.90

alaQoSConditionTcpFlagsVal

TCP flags values used for traffic classification

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.91

alaQoSConditionTcpFlagsValStatus

Not used

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.92

alaQoSConditionTcpFlagsMask

Mask of TCP flags bits used for traffic classification

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.93

alaQoSConditionTcpFlagsMaskStatus

Not used

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.94

alaQoSConditionTcpEstablished

Look for established TCP sessions in classification

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.95

alaQoSConditionSourceIpv6Addr

Source IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.96

alaQoSConditionSourceIpv6AddrStatus

Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.97

alaQoSConditionSourceIpv6Mask

Source IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.98

alaQoSConditionDestinationIpv6Addr

Destination IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.99

alaQoSConditionDestinationIpv6AddrStatus

Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.100

alaQoSConditionDestinationIpv6Mask

Destination IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.101

alaQoSConditionIpv6Traffic

classify IPV6 traffic

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.102

alaQoSConditionIpv6NH

NH value to use for traffic classification

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.103

alaQoSConditionIpv6NHStatus

Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.104

alaQoSConditionIpv6FlowLabel

FL value to use for traffic classification

Integer32r/w

Constraints:
range: 0-1048575

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.105

alaQoSConditionIpv6FlowLabelStatus

Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.106

alaQoSConditionMcastIpv6Addr

Multicast IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.107

alaQoSConditionMcastIpv6AddrStatus

Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.108

alaQoSConditionMcastIpv6Mask

Multicast IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.109

alaQoSConditionDscpEnd

DSCP value to use for traffic classification

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.110

alaQoSConditionInnerSourceVlan

Customer VLAN to use for traffic classification

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.111

alaQoSConditionInnerSourceVlanStatus

Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.112

alaQoSConditionInner8021p

Customer 802.1p to use for traffic classification

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.113

alaQoSConditionInner8021pStatus

Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.114

alaQoSConditionVrfName

Name of Vrf to match traffic in

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.115

alaQoSConditionVrfNameStatus

Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.116

alaQoSCondition8021pEnd

802.1p range end value to use for traffic classification.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.117

alaQoSConditionInner8021pEnd

Inner 802.1p range end value to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.118

alaQoSConditionSourceVlanGroup

Source vlan group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.119

alaQoSConditionSourceVlanGroupStatus

Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for source
vlan group.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.120

alaQoSConditionInnerSourceVlanGroup

Inner Source vlan group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.121

alaQoSConditionInnerSourceVlanGroupStatus

Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner
source vlan group.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.122

alaQoSConditionSIP

SIP type to use for traffic classification

Enumerationr/w

Enumerated Values:

1	audio
2	video
3	other

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.123

alaQoSConditionSIPStatus

SIP Status field indicates whether SIP is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.124

alaQoSAppliedConditionTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4 · 1 row entry · 124 columns

Open in standard view

Table of QoS AppliedCondition definitions

alaQoSAppliedConditionEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1

Definition of QoS AppliedCondition

Indexes

alaQoSAppliedConditionName

Column Syntax OID

alaQoSAppliedConditionName

Name of condition

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.1

alaQoSAppliedConditionSource

What entity created the condition.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.2

alaQoSAppliedConditionSourceSlot

Source physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.3

alaQoSAppliedConditionSourceSlotStatus

Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.4

alaQoSAppliedConditionSourcePort

Source physical port range start to use for
traffic classification

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.5

alaQoSAppliedConditionSourcePortGroup

Source physical port group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.6

alaQoSAppliedConditionSourcePortGroupStatus

Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.7

alaQoSAppliedConditionDestinationSlot

Destination physical slot used for traffic classification
When 0, the port identifies an aggregate

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.8

alaQoSAppliedConditionDestinationSlotStatus

Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.9

alaQoSAppliedConditionDestinationPort

Destination physical port range start to use for traffic
classification

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.10

alaQoSAppliedConditionDestinationPortGroup

Destination physical port group to use for traffic
classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.11

alaQoSAppliedConditionDestinationPortGroupStatus

Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.12

alaQoSAppliedConditionSourceInterfaceType

Source physical interface type to use for traffic
classification

Enumeration

Enumerated Values:

1	ethernet
2	wan
3	ethernet10
4	ethernet100
5	ethernet1G
6	ethernet10G
7	aggregate

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.13

alaQoSAppliedConditionSourceInterfaceTypeStatus

Status field indicating whether the source physical
interface type needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.14

alaQoSAppliedConditionDestinationInterfaceType

Destination physical interface type to use for traffic
classification

Enumeration

Enumerated Values:

1	ethernet
2	wan
3	ethernet10
4	ethernet100
5	ethernet1G
6	ethernet10G
7	aggregate

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.15

alaQoSAppliedConditionDestinationInterfaceTypeStatus

Status field indicating whether the destination physical
interface type needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.16

alaQoSAppliedConditionSourceMacAddr

Source MAC address to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.17

alaQoSAppliedConditionSourceMacAddrStatus

Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.18

alaQoSAppliedConditionSourceMacMask

Source MAC mask to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.19

alaQoSAppliedConditionSourceMacGroup

Source MAC group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.20

alaQoSAppliedConditionSourceMacGroupStatus

Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.21

alaQoSAppliedConditionDestinationMacAddr

Destination MAC address to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.22

alaQoSAppliedConditionDestinationMacAddrStatus

Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.23

alaQoSAppliedConditionDestinationMacMask

Destination MAC mask to use for traffic classification

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.24

alaQoSAppliedConditionDestinationMacGroup

Destination MAC group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.25

alaQoSAppliedConditionDestinationMacGroupStatus

Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.26

alaQoSAppliedConditionSourceVlan

Source VLAN to use for traffic classification

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.27

alaQoSAppliedConditionSourceVlanStatus

Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.28

alaQoSAppliedConditionDestinationVlan

Destination VLAN to use for traffic classification

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.29

alaQoSAppliedConditionDestinationVlanStatus

Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.30

alaQoSAppliedCondition8021p

802.1p value to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.31

alaQoSAppliedCondition8021pStatus

Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.32

alaQoSAppliedConditionSourceIpAddr

Source IP address to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.33

alaQoSAppliedConditionSourceIpAddrStatus

Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.34

alaQoSAppliedConditionSourceIpMask

Source IP mask to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.35

alaQoSAppliedConditionSourceNetworkGroup

Source network group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.36

alaQoSAppliedConditionSourceNetworkGroupStatus

Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.37

alaQoSAppliedConditionDestinationIpAddr

Destination IP address to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.38

alaQoSAppliedConditionDestinationIpAddrStatus

Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.39

alaQoSAppliedConditionDestinationIpMask

Destination IP mask to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.40

alaQoSAppliedConditionDestinationNetworkGroup

Destination network group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.41

alaQoSAppliedConditionDestinationNetworkGroupStatus

Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.42

alaQoSAppliedConditionMulticastIpAddr

Multicast IP address to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.43

alaQoSAppliedConditionMulticastIpAddrStatus

Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.44

alaQoSAppliedConditionMulticastIpMask

Multicast IP mask to use for traffic classification

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.45

alaQoSAppliedConditionMulticastNetworkGroup

Multicast network group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.46

alaQoSAppliedConditionMulticastNetworkGroupStatus

Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.47

alaQoSAppliedConditionTos

TOS value to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.48

alaQoSAppliedConditionTosStatus

Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.49

alaQoSAppliedConditionTosMask

TOS mask to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.50

alaQoSAppliedConditionDscp

DSCP value to use for traffic classification

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.51

alaQoSAppliedConditionDscpStatus

Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.52

alaQoSAppliedConditionDscpMask

DSCP mask to use for traffic classification

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.53

alaQoSAppliedConditionIpProtocol

IP protocol to use for traffic classification.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.54

alaQoSAppliedConditionIpProtocolStatus

Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.55

alaQoSAppliedConditionSourceIpPort

Source IP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.56

alaQoSAppliedConditionSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.57

alaQoSAppliedConditionDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58

alaQoSAppliedConditionDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59

alaQoSAppliedConditionService

Name of service to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60

alaQoSAppliedConditionServiceStatus

Status field indicating whether the service
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61

alaQoSAppliedConditionServiceGroup

Name of service group to use for traffic classification

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62

alaQoSAppliedConditionServiceGroupStatus

Status field indicating whether the service group
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63

alaQoSAppliedConditionIcmpType

ICMP type to use for traffic classification

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64

alaQoSAppliedConditionIcmpTypeStatus

Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65

alaQoSAppliedConditionIcmpCode

ICMP code to use for traffic classification

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66

alaQoSAppliedConditionIcmpCodeStatus

Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67

alaQoSAppliedConditionDlci

DLCI to use to traffic classification

Integer32

Constraints:
range: 0-512

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68

alaQoSAppliedConditionDlciStatus

Status field indicating whether the DLCI
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69

alaQoSAppliedConditionRowStatus

Used to create/delete conditions according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70

alaQoSAppliedConditionSourcePortEnd

Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port.

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71

alaQoSAppliedConditionDestinationPortEnd

Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port.

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72

alaQoSAppliedConditionSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73

alaQoSAppliedConditionDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74

alaQoSAppliedConditionSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75

alaQoSAppliedConditionSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76

alaQoSAppliedConditionSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77

alaQoSAppliedConditionDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78

alaQoSAppliedConditionDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79

alaQoSAppliedConditionDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80

alaQoSAppliedConditionSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81

alaQoSAppliedConditionSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82

alaQoSAppliedConditionSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83

alaQoSAppliedConditionDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84

alaQoSAppliedConditionDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85

alaQoSAppliedConditionDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86

alaQoSAppliedConditionEthertype

Ethertype value to use for traffic classification

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87

alaQoSAppliedConditionEthertypeStatus

Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88

alaQoSAppliedConditionTcpFlags

Use any/all specifieid TCP flags for traffic classification

Enumeration

Enumerated Values:

1	all
2	any

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89

alaQoSAppliedConditionTcpFlagsStatus

Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90

alaQoSAppliedConditionTcpFlagsVal

TCP flags values used for traffic classification

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91

alaQoSAppliedConditionTcpFlagsValStatus

Not used

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92

alaQoSAppliedConditionTcpFlagsMask

Mask of TCP flags bits used for traffic classification

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93

alaQoSAppliedConditionTcpFlagsMaskStatus

Not used

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94

alaQoSAppliedConditionTcpEstablished

Look for established TCP sessions in classification

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95

alaQoSAppliedConditionSourceIpv6Addr

Source IPv6 address to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96

alaQoSAppliedConditionSourceIpv6AddrStatus

Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97

alaQoSAppliedConditionSourceIpv6Mask

Source IPv6 mask to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98

alaQoSAppliedConditionDestinationIpv6Addr

Destination IPv6 address to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99

alaQoSAppliedConditionDestinationIpv6AddrStatus

Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100

alaQoSAppliedConditionDestinationIpv6Mask

Destination IPv6 mask to use for traffic classification

IPV6-TCIpv6Address

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101

alaQoSAppliedConditionIpv6Traffic

classify IPV6 traffic

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102

alaQoSAppliedConditionIpv6NH

NH value to use for traffic classification

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103

alaQoSAppliedConditionIpv6NHStatus

Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104

alaQoSAppliedConditionIpv6FlowLabel

FL value to use for traffic classification

Integer32

Constraints:
range: 0-1048575

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105

alaQoSAppliedConditionIpv6FlowLabelStatus

Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106

alaQoSAppliedConditionMcastIpv6Addr

Multicast IPv6 address to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107

alaQoSAppliedConditionMcastIpv6AddrStatus

Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.108

alaQoSAppliedConditionMcastIpv6Mask

Multicast IPv6 mask to use for traffic classification

IPV6-TCIpv6Addressr/w

Textual Convention: IPV6-TCIpv6Address OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109

alaQoSAppliedConditionDscpEnd

DSCP value to use for traffic classification

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110

alaQoSAppliedConditionInnerSourceVlan

Customer VLAN to use for traffic classification

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111

alaQoSAppliedConditionInnerSourceVlanStatus

Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112

alaQoSAppliedConditionInner8021p

Customer 802.1p to use for traffic classification

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113

alaQoSAppliedConditionInner8021pStatus

Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114

alaQoSAppliedConditionVrfName

Name of Vrf to match traffic in

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115

alaQoSAppliedConditionVrfNameStatus

Status field indicating whether the traffic from a specific vrf needs
to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116

alaQoSAppliedCondition8021pEnd

802.1p range end value to use for traffic classification.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117

alaQoSAppliedConditionInner8021pEnd

Inner 802.1p range end value to use for traffic classification.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118

alaQoSAppliedConditionSourceVlanGroup

Source vlan group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119

alaQoSAppliedConditionSourceVlanGroupStatus

Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for source
vlan group.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120

alaQoSAppliedConditionInnerSourceVlanGroup

Inner Source vlan group to use for traffic classification

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121

alaQoSAppliedConditionInnerSourceVlanGroupStatus

Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner
source vlan group.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122

alaQoSAppliedConditionSIP

SIP type to use for traffic classification

Enumerationr/w

Enumerated Values:

1	audio
2	video
3	other

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.123

alaQoSAppliedConditionSIPStatus

SIP Status field indicates whether SIP is enabled or disabled
for traffic classification

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.124

alaQoSServiceTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5 · 1 row entry · 22 columns

Open in standard view

Table of QoS Service definitions

alaQoSServiceEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1

Definition of QoS Service

Indexes

alaQoSServiceName

Column Syntax OID

alaQoSServiceName

Name of the service

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.1

alaQoSServiceSource

What entity created the service.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.2

alaQoSServiceProtocol

protocol field for Service

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.3

alaQoSServiceSourceIpPort

Source IP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.4

alaQoSServiceSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.5

alaQoSServiceDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.6

alaQoSServiceDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.7

alaQoSServiceRowStatus

Used to create/delete services according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.8

alaQoSServiceSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate
a range. When '0', use source IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.9

alaQoSServiceDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.10

alaQoSServiceSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.11

alaQoSServiceSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.12

alaQoSServiceSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.13

alaQoSServiceDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.14

alaQoSServiceDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.15

alaQoSServiceDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port as
a single TCP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.16

alaQoSServiceSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.17

alaQoSServiceSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.18

alaQoSServiceSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a
range. When '0', use source UDP port as a single UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.19

alaQoSServiceDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.20

alaQoSServiceDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.21

alaQoSServiceDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port as
a single UDP port.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.22

alaQoSAppliedServiceTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6 · 1 row entry · 22 columns

Open in standard view

Table of QoS AppliedService definitions

alaQoSAppliedServiceEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1

Definition of QoS AppliedService

Indexes

alaQoSAppliedServiceName

Column Syntax OID

alaQoSAppliedServiceName

Name of the service

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.1

alaQoSAppliedServiceSource

What entity created the service.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.2

alaQoSAppliedServiceProtocol

protocol field for AppliedService

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.3

alaQoSAppliedServiceSourceIpPort

Source IP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.4

alaQoSAppliedServiceSourceIpPortStatus

Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.5

alaQoSAppliedServiceDestinationIpPort

Destination IP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.6

alaQoSAppliedServiceDestinationIpPortStatus

Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.7

alaQoSAppliedServiceRowStatus

Used to create/delete services according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.8

alaQoSAppliedServiceSourceIpPortEnd

Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate
a range. When '0', use source IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.9

alaQoSAppliedServiceDestinationIpPortEnd

Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.10

alaQoSAppliedServiceSourceTcpPort

Source TCP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.11

alaQoSAppliedServiceSourceTcpPortStatus

Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.12

alaQoSAppliedServiceSourceTcpPortEnd

Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.13

alaQoSAppliedServiceDestinationTcpPort

Destination TCP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.14

alaQoSAppliedServiceDestinationTcpPortStatus

Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.15

alaQoSAppliedServiceDestinationTcpPortEnd

Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port as
a single TCP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.16

alaQoSAppliedServiceSourceUdpPort

Source UDP port range start to use for traffic classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.17

alaQoSAppliedServiceSourceUdpPortStatus

Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.18

alaQoSAppliedServiceSourceUdpPortEnd

Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a
range. When '0', use source UDP port as a single UDP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.19

alaQoSAppliedServiceDestinationUdpPort

Destination UDP port range start to use for traffic
classification.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.20

alaQoSAppliedServiceDestinationUdpPortStatus

Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.21

alaQoSAppliedServiceDestinationUdpPortEnd

Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port as
a single UDP port.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.22

alaQoSServiceGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7 · 1 row entry · 3 columns

Open in standard view

Table of QoS ServiceGroups definitions

alaQoSServiceGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1

Definition of QoS ServiceGroups

Indexes

alaQoSServiceGroupsName

Column Syntax OID

alaQoSServiceGroupsName

Name of service group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.1

alaQoSServiceGroupsSource

What entity created the service group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.2

alaQoSServiceGroupsStatus

Used to create/delete service groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.3

alaQoSAppliedServiceGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedServiceGroups definitions

alaQoSAppliedServiceGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1

Definition of QoS AppliedServiceGroups

Indexes

alaQoSAppliedServiceGroupsName

Column Syntax OID

alaQoSAppliedServiceGroupsName

Name of service group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.1

alaQoSAppliedServiceGroupsSource

What entity created the service group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.2

alaQoSAppliedServiceGroupsStatus

Used to create/delete service groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.3

alaQoSServiceGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9 · 1 row entry · 2 columns

Open in standard view

Table of QoS ServiceGroup definitions

alaQoSServiceGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1

Definition of QoS ServiceGroup

Indexes

alaQoSServiceGroupsName alaQoSServiceGroupServiceName

Column Syntax OID

alaQoSServiceGroupServiceName

Name of service in service group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.1

alaQoSServiceGroupStatus

Used to create/delete service group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.2

alaQoSAppliedServiceGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10 · 1 row entry · 2 columns

Open in standard view

Table of QoS AppliedServiceGroup definitions

alaQoSAppliedServiceGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1

Definition of QoS AppliedServiceGroup

Indexes

alaQoSAppliedServiceGroupsName alaQoSAppliedServiceGroupServiceName

Column Syntax OID

alaQoSAppliedServiceGroupServiceName

Name of service in service group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.1

alaQoSAppliedServiceGroupStatus

Used to create/delete service group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.2

alaQoSNetworkGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11 · 1 row entry · 3 columns

Open in standard view

Table of QoS NetworkGroups definitions

alaQoSNetworkGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1

Definition of QoS NetworkGroups

Indexes

alaQoSNetworkGroupsName

Column Syntax OID

alaQoSNetworkGroupsName

Name of network group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.1

alaQoSNetworkGroupsSource

What entity created the network group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.2

alaQoSNetworkGroupsStatus

Used to create/delete network groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.3

alaQoSAppliedNetworkGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedNetworkGroups definitions

alaQoSAppliedNetworkGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1

Definition of QoS AppliedNetworkGroups

Indexes

alaQoSAppliedNetworkGroupsName

Column Syntax OID

alaQoSAppliedNetworkGroupsName

Name of network group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.1

alaQoSAppliedNetworkGroupsSource

What entity created the network group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.2

alaQoSAppliedNetworkGroupsStatus

Used to create/delete network groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.3

alaQoSNetworkGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13 · 1 row entry · 3 columns

Open in standard view

Table of QoS NetworkGroup definitions

alaQoSNetworkGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1

Definition of QoS NetworkGroup

Indexes

alaQoSNetworkGroupsName alaQoSNetworkGroupIpAddr alaQoSNetworkGroupIpMask

Column Syntax OID

alaQoSNetworkGroupIpAddr

IP address for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.1

alaQoSNetworkGroupIpMask

IP mask for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.2

alaQoSNetworkGroupStatus

Used to create/delete network group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.3

alaQoSAppliedNetworkGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedNetworkGroup definitions

alaQoSAppliedNetworkGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1

Definition of QoS AppliedNetworkGroup

Indexes

alaQoSAppliedNetworkGroupsName alaQoSAppliedNetworkGroupIpAddr alaQoSAppliedNetworkGroupIpMask

Column Syntax OID

alaQoSAppliedNetworkGroupIpAddr

IP address for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.1

alaQoSAppliedNetworkGroupIpMask

IP mask for network group entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.2

alaQoSAppliedNetworkGroupStatus

Used to create/delete network group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.3

alaQoSMACGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15 · 1 row entry · 3 columns

Open in standard view

Table of QoS MACGroups definitions

alaQoSMACGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1

Definition of QoS MACGroups

Indexes

alaQoSMACGroupsName

Column Syntax OID

alaQoSMACGroupsName

Name of MAC group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.1

alaQoSMACGroupsSource

What entity created the MAC group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.2

alaQoSMACGroupsStatus

Used to create/delete MAC groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.3

alaQoSAppliedMACGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedMACGroups definitions

alaQoSAppliedMACGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1

Definition of QoS AppliedMACGroups

Indexes

alaQoSAppliedMACGroupsName

Column Syntax OID

alaQoSAppliedMACGroupsName

Name of MAC group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.1

alaQoSAppliedMACGroupsSource

What entity created the MAC group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.2

alaQoSAppliedMACGroupsStatus

Used to create/delete MAC groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.3

alaQoSMACGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17 · 1 row entry · 3 columns

Open in standard view

Table of QoS MACGroup definitions

alaQoSMACGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1

Definition of QoS MACGroup

Indexes

alaQoSMACGroupsName alaQoSMACGroupMacAddr alaQoSMACGroupMacMask

Column Syntax OID

alaQoSMACGroupMacAddr

MAC address for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.1

alaQoSMACGroupMacMask

MAC mask for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.2

alaQoSMACGroupStatus

Used to create/delete MAC group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.3

alaQoSAppliedMACGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedMACGroup definitions

alaQoSAppliedMACGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1

Definition of QoS AppliedMACGroup

Indexes

alaQoSAppliedMACGroupsName alaQoSAppliedMACGroupMacAddr alaQoSAppliedMACGroupMacMask

Column Syntax OID

alaQoSAppliedMACGroupMacAddr

MAC address for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.1

alaQoSAppliedMACGroupMacMask

MAC mask for MAC group entry

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.2

alaQoSAppliedMACGroupStatus

Used to create/delete MAC group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.3

alaQoSPortGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19 · 1 row entry · 4 columns

Open in standard view

Table of QoS PortGroups definitions

alaQoSPortGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1

Definition of QoS PortGroups

Indexes

alaQoSPortGroupsName

Column Syntax OID

alaQoSPortGroupsName

Name of port group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.1

alaQoSPortGroupsSource

What entity created the port group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.2

alaQoSPortGroupsStatus

Used to create/delete port groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.3

alaQoSPortGroupsMode

Mode for policy action on the per port basis or group basis.

Enumerationr/w

Enumerated Values:

1	split
2	nonSplit

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.4

alaQoSAppliedPortGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20 · 1 row entry · 4 columns

Open in standard view

Table of QoS AppliedPortGroups definitions

alaQoSAppliedPortGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1

Definition of QoS AppliedPortGroups

Indexes

alaQoSAppliedPortGroupsName

Column Syntax OID

alaQoSAppliedPortGroupsName

Name of port group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.1

alaQoSAppliedPortGroupsSource

What entity created the port group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.2

alaQoSAppliedPortGroupsStatus

Used to create/delete port groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.3

alaQoSAppliedPortGroupsMode

Mode for policy action on the per port basis or group basis.

Enumerationr/w

Enumerated Values:

1	split
2	nonSplit

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.4

alaQoSPortGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21 · 1 row entry · 4 columns

Open in standard view

Table of QoS PortGroup definitions

alaQoSPortGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1

Definition of QoS PortGroup

Indexes

alaQoSPortGroupsName alaQoSPortGroupSlot alaQoSPortGroupPort alaQoSPortGroupPortEnd

Column Syntax OID

alaQoSPortGroupSlot

Physical slot for port group entry

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.1

alaQoSPortGroupPort

Physical port range start for port group entry

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.2

alaQoSPortGroupStatus

Used to create/delete port group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.3

alaQoSPortGroupPortEnd

Physical port range end for port group entry
Must be greater than port range start to indicate a range.
When '1', use port as a single port.

Integer32

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.4

alaQoSAppliedPortGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22 · 1 row entry · 4 columns

Open in standard view

Table of QoS AppliedPortGroup definitions

alaQoSAppliedPortGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1

Definition of QoS AppliedPortGroup

Indexes

alaQoSAppliedPortGroupsName alaQoSAppliedPortGroupSlot alaQoSAppliedPortGroupPort alaQoSAppliedPortGroupPortEnd

Column Syntax OID

alaQoSAppliedPortGroupSlot

Physical slot for port group entry

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.1

alaQoSAppliedPortGroupPort

Physical port range start for port group entry

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.2

alaQoSAppliedPortGroupStatus

Used to create/delete port group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.3

alaQoSAppliedPortGroupPortEnd

Physical port range end for port group entry
Must be greater than port range start to indicate a range.
When '1', use port as a single port.

Integer32

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.4

alaQoSMapGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23 · 1 row entry · 3 columns

Open in standard view

Table of QoS MapGroups definitions

alaQoSMapGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1

Definition of QoS MapGroups

Indexes

alaQoSMapGroupsName

Column Syntax OID

alaQoSMapGroupsName

Name of map group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.1

alaQoSMapGroupsSource

What entity created the map group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.2

alaQoSMapGroupsStatus

Used to create/delete map groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.3

alaQoSAppliedMapGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24 · 1 row entry · 3 columns

Open in standard view

Table of QoS AppliedMapGroups definitions

alaQoSAppliedMapGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1

Definition of QoS AppliedMapGroups

Indexes

alaQoSAppliedMapGroupsName

Column Syntax OID

alaQoSAppliedMapGroupsName

Name of map group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.1

alaQoSAppliedMapGroupsSource

What entity created the map group.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.2

alaQoSAppliedMapGroupsStatus

Used to create/delete map groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.3

alaQoSMapGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25 · 1 row entry · 4 columns

Open in standard view

Table of QoS MapGroup definitions

alaQoSMapGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1

Definition of QoS MapGroup

Indexes

alaQoSMapGroupsName alaQoSMapGroupKey alaQoSMapGroupKeyEnd alaQoSMapGroupValue

Column Syntax OID

alaQoSMapGroupKey

Key range start of map group entry.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.1

alaQoSMapGroupKeyEnd

Key range end for map group entries. Key range end
must be greater than key range start to indicate a range.
When '0', use key range start as a single key.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.2

alaQoSMapGroupValue

Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.3

alaQoSMapGroupStatus

Used to create/delete map group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.4

alaQoSAppliedMapGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26 · 1 row entry · 4 columns

Open in standard view

Table of QoS AppliedMapGroup definitions

alaQoSAppliedMapGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1

Definition of QoS AppliedMapGroup

Indexes

alaQoSAppliedMapGroupsName alaQoSAppliedMapGroupKey alaQoSAppliedMapGroupKeyEnd alaQoSAppliedMapGroupValue

Column Syntax OID

alaQoSAppliedMapGroupKey

Key range start of map group entry.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.1

alaQoSAppliedMapGroupKeyEnd

Key range end for map group entries. Key range end
must be greater than key range start to indicate a range.
When '0', use key range start as a single key.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.2

alaQoSAppliedMapGroupValue

Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen.

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.3

alaQoSAppliedMapGroupStatus

Used to create/delete map group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.4

alaQoSActionTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27 · 1 row entry · 83 columns

Open in standard view

Table of QoS Action definitions

alaQoSActionEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1

Definition of QoS Action

Indexes

alaQoSActionName

Column Syntax OID

alaQoSActionName

Name of action

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1

alaQoSActionSource

What entity created the action.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2

alaQoSActionDisposition

Disposition of traffic using the action.
Use to filter out unwanted traffic.

Enumerationr/w

Enumerated Values:

1	accept
2	drop
3	deny

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3

alaQoSActionDropAlgorithm

Which drop algorithm should be used to discard traffic when
oversubscribed.

Enumerationr/w

Enumerated Values:

1	tail
2	wred

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4

alaQoSActionWredMaximumThreshold

Bandwidth at which WRED should discard most traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5

alaQoSActionWredMaximumThresholdStatus

Status field indicating whether WRED maximum threshold
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6

alaQoSActionWredMinimumThreshold

Bandwidth at which WRED should start to discard traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7

alaQoSActionWredMinimumThresholdStatus

Status field indicating whether WRED minimum threshold
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8

alaQoSActionWredMaximumProbability

Probabilty that traffic will be dropped at WRED
maximum threshold.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9

alaQoSActionWredMaximumProbabilityStatus

Status field indicating whether WRED maximum probability
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10

alaQoSActionMinimumBandwidth

Minimum bandwidth (Kbits/sec) to guarantee for traffic

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11

alaQoSActionMinimumBandwidthStatus

Status field indicating whether minimum bandwidth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12

alaQoSActionMaximumBandwidth

Maximum bandwidth (Kbits/sec) allowed for traffic

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13

alaQoSActionMaximumBandwidthStatus

Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14

alaQoSActionPeakBandwidth

Peak bandwidth (Kbits/sec) allowed for traffic

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15

alaQoSActionPeakBandwidthStatus

Status field indicating whether peak bandwidth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16

alaQoSActionPriority

Internal and queueing priority to use for traffic.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17

alaQoSActionPriorityStatus

Status field indicating whether priority
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18

alaQoSActionShared

When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19

alaQoSActionJitter

Maximum jitter to allow for traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20

alaQoSActionJitterStatus

Status field indicating whether jitter
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21

alaQoSActionLatency

Maximum latency to allow for traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22

alaQoSActionLatencyStatus

Status field indicating whether latency
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23

alaQoSActionMaximumDepth

Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24

alaQoSActionMaximumDepthStatus

Status field indicating whether maximum depth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25

alaQoSActionMaximumBuffers

Maxmimum buffers for queues for traffic.

Integer32r/w

Constraints:
range: 0-2047

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26

alaQoSActionMaximumBuffersStatus

Status field indicating whether maximum buffers
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27

alaQoSAction8021p

802.1p value to stamp on traffic.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28

alaQoSAction8021pStatus

Status field indicating whether 802.1p
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29

alaQoSActionTos

TOS value to stamp on traffic. (High 3 bits of TOS byte)

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30

alaQoSActionTosStatus

Status field indicating whether TOS
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31

alaQoSActionDscp

TOS value to stamp on traffic. (High 6 bits of TOS byte)

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32

alaQoSActionDscpStatus

Status field indicating whether DSCP
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33

alaQoSActionMapFrom

What field to use as key for mapping 802.1p/TOS/DSCP priorities

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34

alaQoSActionMapTo

What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35

alaQoSActionMapGroup

Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36

alaQoSActionMapGroupStatus

Status field indicating whether a map group
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37

alaQoSActionSourceRewriteIpAddr

Source IP address to rewrite on traffic.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38

alaQoSActionSourceRewriteIpAddrStatus

Status field indicating whether source rewrite IP address & mask
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39

alaQoSActionSourceRewriteIpMask

Source rewrite IP mask to determine how much of
source IP to rewrite.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40

alaQoSActionSourceRewriteNetworkGroup

Name of network group containing source address/masks to rewrite
on traffic. Must be a one to on correspondence with
source network group entries in the condition.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41

alaQoSActionSourceRewriteNetworkGroupStatus

Status field indicating whether source rewrite network group
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42

alaQoSActionDestinationRewriteIpAddr

Destination IP address to rewrite on traffic.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43

alaQoSActionDestinationRewriteIpAddrStatus

Status field indicating whether destination rewrite IP address
& mask is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44

alaQoSActionDestinationRewriteIpMask

Destination rewrite IP mask to determine how much of
destination IP to rewrite.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45

alaQoSActionDestinationRewriteNetworkGroup

Name of network group containing destination address/masks to
rewrite on traffic. Must be a one to on correspondence with
destination network group entries in the condition.

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46

alaQoSActionDestinationRewriteNetworkGroupStatus

Status field indicating whether destination rewrite network
group is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47

alaQoSActionLoadBalanceGroup

Name of load balance group to use for traffic

OctetStringr/w

Constraints:
range: 0-23

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48

alaQoSActionLoadBalanceGroupStatus

Status field indicating whether load balanace group
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49

alaQoSActionPermanentGatewayIpAddr

Next hop gateway to use for traffic

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50

alaQoSActionPermanentGatewayIpAddrStatus

Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51

alaQoSActionAlternateGatewayIpAddr

Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52

alaQoSActionAlternateGatewayIpAddrStatus

Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53

alaQoSActionRowStatus

Used to create/delete actions according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54

alaQoSActionMinimumDepth

Minimum depth (Kbytes) of queues for traffic.
Used for CBS in tri-color marker applications.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55

alaQoSActionMinimumDepthStatus

Status field indicating whether minimum depth
is specified(enabled) or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56

alaQoSActionVPNAccess

How to encrypt traffic

Enumerationr/w

Enumerated Values:

1	protect
2	bypass
3	drop

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57

alaQoSActionNocache

When enabled, don't make hardware entries for matching flows.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58

alaQoSActionPortdisable

When enabled, disable the physical source port of the traffic.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59

alaQoSActionRedirectSlot

Destination physical slot for redirected traffic

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60

alaQoSActionRedirectSlotStatus

Status for alaQoSActionRedirectSlotStatus field

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61

alaQoSActionRedirectPort

Destination physical port for redirected traffic

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62

alaQoSActionRedirectAgg

Destination linkagg for redirected traffic

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63

alaQoSActionRedirectAggStatus

Status for alaQoSActionRedirectAggStatus field

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64

alaQoSActionMirrorSlot

Destination physical slot for mirrored traffic

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65

alaQoSActionMirrorPort

Destination physical port for mirrored traffic

Integer32r/w

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66

alaQoSActionMirrorMode

Mirroring mode

Enumerationr/w

Enumerated Values:

1	ingress
2	egress
3	both

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67

alaQoSActionMirrorModeStatus

Status for alaQoSActionMirrorMode field

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68

alaQoSActionCIR

Committed Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69

alaQoSActionCIRStatus

Status field indicating whether CIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70

alaQoSActionCBS

Committed Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71

alaQoSActionCBSStatus

Status field indicating whether CBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72

alaQoSActionPIR

Peak Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73

alaQoSActionPIRStatus

Status field indicating whether PIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74

alaQoSActionPBS

Peak Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75

alaQoSActionPBSStatus

Status field indicating whether PBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76

alaQoSActionCounterColor

Specifies the color mode for the counters which will be used for sr/trTCM.

Enumerationr/w

Enumerated Values:

1	rednonred
2	greennongreen
3	greenred
4	greenyellow
5	redyellow

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77

alaQoSActionRTCPMonitor

RTCP Monitor status for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.78

alaQoSActionRTCPMonitorStatus

Status of the RTCP Monitor field for the traffic.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.79

alaQoSActionRTCPDSCP

RTCP DSCP number for the traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.80

alaQoSActionRTCPDSCPStatus

Status of the RTCP DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.81

alaQoSActionTrustDSCP

Trust DSCP status for the traffic.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.82

alaQoSActionTrustDSCPStatus

Status of the Trust DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.83

alaQoSAppliedActionTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28 · 1 row entry · 83 columns

Open in standard view

Table of QoS AppliedAction definitions

alaQoSAppliedActionEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1

Definition of QoS AppliedAction

Indexes

alaQoSAppliedActionName

Column Syntax OID

alaQoSAppliedActionName

Name of action

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.1

alaQoSAppliedActionSource

What entity created the action.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.2

alaQoSAppliedActionDisposition

Disposition of traffic using the action.
Use to filter out unwanted traffic.

Enumeration

Enumerated Values:

1	accept
2	drop
3	deny

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.3

alaQoSAppliedActionDropAlgorithm

Which drop algorithm should be used to discard traffic when
oversubscribed.

Enumeration

Enumerated Values:

1	tail
2	wred

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4

alaQoSAppliedActionWredMaximumThreshold

Bandwidth at which WRED should discard most traffic.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.5

alaQoSAppliedActionWredMaximumThresholdStatus

Status field indicating whether WRED maximum threshold
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.6

alaQoSAppliedActionWredMinimumThreshold

Bandwidth at which WRED should start to discard traffic.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7

alaQoSAppliedActionWredMinimumThresholdStatus

Status field indicating whether WRED minimum threshold
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.8

alaQoSAppliedActionWredMaximumProbability

Probabilty that traffic will be dropped at WRED
maximum threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.9

alaQoSAppliedActionWredMaximumProbabilityStatus

Status field indicating whether WRED maximum probability
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.10

alaQoSAppliedActionMinimumBandwidth

Minimum bandwidth (Kbits/sec) to guarantee for traffic

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.11

alaQoSAppliedActionMinimumBandwidthStatus

Status field indicating whether minimum bandwidth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.12

alaQoSAppliedActionMaximumBandwidth

Maximum bandwidth (Kbits/sec) allowed for traffic

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.13

alaQoSAppliedActionMaximumBandwidthStatus

Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.14

alaQoSAppliedActionPeakBandwidth

Peak bandwidth (Kbits/sec) allowed for traffic

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.15

alaQoSAppliedActionPeakBandwidthStatus

Status field indicating whether peak bandwidth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.16

alaQoSAppliedActionPriority

Internal and queueing priority to use for traffic.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.17

alaQoSAppliedActionPriorityStatus

Status field indicating whether priority
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.18

alaQoSAppliedActionShared

When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.19

alaQoSAppliedActionJitter

Maximum jitter to allow for traffic.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.20

alaQoSAppliedActionJitterStatus

Status field indicating whether jitter
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.21

alaQoSAppliedActionLatency

Maximum latency to allow for traffic.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.22

alaQoSAppliedActionLatencyStatus

Status field indicating whether latency
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.23

alaQoSAppliedActionMaximumDepth

Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.24

alaQoSAppliedActionMaximumDepthStatus

Status field indicating whether maximum depth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.25

alaQoSAppliedActionMaximumBuffers

Maxmimum buffers for queues for traffic.

Integer32

Constraints:
range: 0-2047

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.26

alaQoSAppliedActionMaximumBuffersStatus

Status field indicating whether maximum buffers
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.27

alaQoSAppliedAction8021p

802.1p value to stamp on traffic.

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.28

alaQoSAppliedAction8021pStatus

Status field indicating whether 802.1p
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.29

alaQoSAppliedActionTos

TOS value to stamp on traffic. (High 3 bits of TOS byte)

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.30

alaQoSAppliedActionTosStatus

Status field indicating whether TOS
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.31

alaQoSAppliedActionDscp

TOS value to stamp on traffic. (High 6 bits of TOS byte)

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.32

alaQoSAppliedActionDscpStatus

Status field indicating whether DSCP
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.33

alaQoSAppliedActionMapFrom

What field to use as key for mapping 802.1p/TOS/DSCP priorities

Enumeration

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.34

alaQoSAppliedActionMapTo

What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities

Enumeration

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.35

alaQoSAppliedActionMapGroup

Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.36

alaQoSAppliedActionMapGroupStatus

Status field indicating whether a map group
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.37

alaQoSAppliedActionSourceRewriteIpAddr

Source IP address to rewrite on traffic.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.38

alaQoSAppliedActionSourceRewriteIpAddrStatus

Status field indicating whether source rewrite IP address & mask
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.39

alaQoSAppliedActionSourceRewriteIpMask

Source rewrite IP mask to determine how much of
source IP to rewrite.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.40

alaQoSAppliedActionSourceRewriteNetworkGroup

Name of network group containing source address/masks to rewrite
on traffic. Must be a one to on correspondence with
source network group entries in the condition.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.41

alaQoSAppliedActionSourceRewriteNetworkGroupStatus

Status field indicating whether source rewrite network group
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.42

alaQoSAppliedActionDestinationRewriteIpAddr

Destination IP address to rewrite on traffic.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.43

alaQoSAppliedActionDestinationRewriteIpAddrStatus

Status field indicating whether destination rewrite IP address
& mask is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.44

alaQoSAppliedActionDestinationRewriteIpMask

Destination rewrite IP mask to determine how much of
destination IP to rewrite.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.45

alaQoSAppliedActionDestinationRewriteNetworkGroup

Name of network group containing destination address/masks to
rewrite on traffic. Must be a one to on correspondence with
destination network group entries in the condition.

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.46

alaQoSAppliedActionDestinationRewriteNetworkGroupStatus

Status field indicating whether destination rewrite network
group is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.47

alaQoSAppliedActionLoadBalanceGroup

Name of load balance group to use for traffic

OctetString

Constraints:
range: 0-23

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48

alaQoSAppliedActionLoadBalanceGroupStatus

Status field indicating whether load balanace group
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49

alaQoSAppliedActionPermanentGatewayIpAddr

Next hop gateway to use for traffic

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.50

alaQoSAppliedActionPermanentGatewayIpAddrStatus

Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.51

alaQoSAppliedActionAlternateGatewayIpAddr

Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.52

alaQoSAppliedActionAlternateGatewayIpAddrStatus

Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.53

alaQoSAppliedActionRowStatus

Used to create/delete actions according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.54

alaQoSAppliedActionMinimumDepth

Minimum depth (Kbytes) of queues for traffic.
Used for CBS in tri-color marker applications.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.55

alaQoSAppliedActionMinimumDepthStatus

Status field indicating whether minimum depth
is specified(enabled) or not(disabled).

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.56

alaQoSAppliedActionVPNAccess

How to encrypt traffic

Enumeration

Enumerated Values:

1	protect
2	bypass
3	drop

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.57

alaQoSAppliedActionNocache

When enabled, don't make hardware entries for matching flows.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.58

alaQoSAppliedActionPortdisable

When enabled, disable the physical source port of the traffic.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.59

alaQoSAppliedActionRedirectSlot

Destination physical slot for redirected traffic

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.60

alaQoSAppliedActionRedirectSlotStatus

Status for alaQoSAppliedActionRedirectSlotStatus field

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.61

alaQoSAppliedActionRedirectPort

Destination physical port for redirected traffic

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.62

alaQoSAppliedActionRedirectAgg

Destination linkagg for redirected traffic

Integer32

Constraints:
range: 0-32

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.63

alaQoSAppliedActionRedirectAggStatus

Status for alaQoSAppliedActionRedirectAggStatus field

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.64

alaQoSAppliedActionMirrorSlot

Destination physical slot for mirrored traffic

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.65

alaQoSAppliedActionMirrorPort

Destination physical port for mirrored traffic

Integer32

Constraints:
range: 1-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.66

alaQoSAppliedActionMirrorMode

Mirroring mode

Enumeration

Enumerated Values:

1	ingress
2	egress
3	both

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.67

alaQoSAppliedActionMirrorModeStatus

Status for alaQoSAppliedActionMirrorMode field

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.68

alaQoSAppliedActionCIR

Committed Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.69

alaQoSAppliedActionCIRStatus

Status field indicating whether CIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.70

alaQoSAppliedActionCBS

Committed Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.71

alaQoSAppliedActionCBSStatus

Status field indicating whether CBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.72

alaQoSAppliedActionPIR

Peak Information Rate - bandwidth values in kilobits per second.

kilobits per secondSNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.73

alaQoSAppliedActionPIRStatus

Status field indicating whether PIR value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.74

alaQoSAppliedActionPBS

Peak Burst Size - bucket size in byte.

Integer32r/w

Constraints:
range: 0-2147450880

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.75

alaQoSAppliedActionPBSStatus

Status field indicating whether PBS value is specified(enabled)
or not(disabled).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.76

alaQoSAppliedActionCounterColor

Specifies the color mode for the counters which will be used for sr/trTCM.

Enumerationr/w

Enumerated Values:

1	rednonred
2	greennongreen
3	greenred
4	greenyellow
5	redyellow

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.77

alaQoSAppliedActionRTCPMonitor

RTCP Monitor status for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.78

alaQoSAppliedActionRTCPMonitorStatus

Status of the RTCP Monitor field for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.79

alaQoSAppliedActionRTCPDSCP

RTCP DSCP number for the traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.80

alaQoSAppliedActionRTCPDSCPStatus

Status of the RTCP DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.81

alaQoSAppliedActionTrustDSCP

Trust DSCP status for the traffic.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.82

alaQoSAppliedActionTrustDSCPStatus

Status of the Trust DSCP field for the traffic.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.83

alaQoSPortTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29 · 1 row entry · 138 columns

Open in standard view

Table of QoS Port definitions

alaQoSPortEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1

Definition of QoS Port

Indexes

alaQoSPortSlot alaQoSPortPort

Column Syntax OID

alaQoSPortSlot

Physical slot port resides on

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.1

alaQoSPortPort

Physical port number

Integer32

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.2

alaQoSPortEnabled

Pending QoS enable status for the physical port
Does not take effect until an 'Apply' command is issued

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.3

alaQoSPortAppliedEnabled

Current QoS enable status for the physical port

Enumeration

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.4

alaQoSPortInterfaceType

The type of interface QoS matches for this physical port

Enumeration

Enumerated Values:

1	ethernet
2	wan
3	ethernet10
4	ethernet100
5	ethernet1G
6	ethernet10G
7	aggregate

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.5

alaQoSPortTrusted

Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed
through the switch. When untrusted, 802.1p/DSCP values are set
to the port defaults.

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.6

alaQoSPortDefault8021p

802.1p priority value to use for untagged frames arriving on
the port and tagged frames when the port is untrusted.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.7

alaQoSPortDefaultDSCP

DSCP value to stamp in frames arriving on the port when the port
is untrusted

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.8

alaQoSPortMaximumReservedBandwidth

Pending maximum reservable bandwidth on the port.
Policies can reserve up to this much bandwidth.
Does not take effect until an 'Apply' is issued

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.9

alaQoSPortMaximumReservedBandwidthStatus

Pending status field indicating whether to enforce
maximum reservable bandwidth on next 'Apply'

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.10

alaQoSPortAppliedMaximumReservedBandwidth

Current maximum reservable bandwidth on the port.
Policies can reserve up to this much bandwidth.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.11

alaQoSPortAppliedMaximumReservedBandwidthStatus

Current status field indicating whether to enforce
maximum reservable bandwidth.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.12

alaQoSPortMaximumSignalledBandwidth

Pending maximum signalled bandwidth on the port.
Signalling protocols can reserve up to this much bandwidth.
Does not take effect until an 'Apply' is issued

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.13

alaQoSPortMaximumSignalledBandwidthStatus

Pending status field indicating whether to enforce
maximum signalled bandwidth on next 'Apply'

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.14

alaQoSPortAppliedMaximumSignalledBandwidth

Current maximum signalled bandwidth on the port.
Signalling protocols can reserve up to this much bandwidth.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15

alaQoSPortAppliedMaximumSignalledBandwidthStatus

Current status field indicating whether to enforce
maximum signalled bandwidth.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.16

alaQoSPortDefaultQueues

Pending number of default queues for the port
Overrides any switch-wide default queue setting

Integer32r/w

Constraints:
range: 8-8

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.17

alaQoSPortAppliedDefaultQueues

Current number of default queues for the port
Overrides any switch-wide default queue setting

Integer32

Constraints:
range: 8-8

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.18

alaQoSPortMaximumDefaultBandwidth

Pending maximum default bandwidth (Kbits/sec).
Maximum rate for default queues on this port
Does not take effect until an 'Apply' command is issued

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.19

alaQoSPortMaximumDefaultBandwidthStatus

Pending status field indicating whether to enforce
maximum default bandwidth on next 'Apply'

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.20

alaQoSPortAppliedMaximumDefaultBandwidth

Current maximum default bandwidth (Kbits/sec).
Maximum rate for default queues this port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.21

alaQoSPortAppliedMaximumDefaultBandwidthStatus

Current status field indicating whether to enforce
maximum default bandwidth.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.22

alaQoSPortMaximumDefaultDepth

Pending maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port
Does not take effect until an 'Apply' command is issued

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.23

alaQoSPortMaximumDefaultDepthStatus

Pending status field indicating whether to enforce
maximum depth on next 'Apply'

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.24

alaQoSPortAppliedMaximumDefaultDepth

Current maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.25

alaQoSPortAppliedMaximumDefaultDepthStatus

Current status field indicating whether to enforce
maximum depth.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.26

alaQoSPortMaximumDefaultBuffers

Pending maximum buffers for egress queues.
Maximum number of buffers for queues on this port
Does not take effect until an 'Apply' command is issued

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.27

alaQoSPortMaximumDefaultBuffersStatus

Pending status field indicating whether to enforce
maximum buffers on next 'Apply'

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.28

alaQoSPortAppliedMaximumDefaultBuffers

Current maximum buffers for egress queues.
Maximum number of buffers for queues on this port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.29

alaQoSPortAppliedMaximumDefaultBuffersStatus

Current status field indicating whether to enforce
maximum buffers.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.30

alaQoSPortReset

Reset all QoS parameters to default values

Enumerationr/w

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.31

alaQoSPortPhysicalBandwidth

Physical bandwidth of port (Kbit/sec)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.32

alaQoSPortReservedBandwidth

Bandwidth reserved by policies on port (Kbit/sec)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.33

alaQoSPortSignalledBandwidth

Bandwidth reserved by signalling on port (Kbit/sec)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.34

alaQoSPortCurrentBandwidth

Current measured bandwidth of port (Kbits/sec)

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.35

alaQoSPortDefaultQidLow

Default low queue ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.36

alaQoSPortDefaultQidMedium

Default medium queue ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.37

alaQoSPortDefaultQidHigh

Default high queue ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.38

alaQoSPortDefaultQidUrgent

Default urgent queue ID

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.39

alaQoSPortFloodQid

ID of the flood queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.40

alaQoSPortQueues

Number of queues currently on the port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.41

alaQoSPortQueuesCreated

Number of queue requests on the port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.42

alaQoSPortQueuesFailed

Number of queue requests that failed on the port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.43

alaQoSPortQueuesPreempted

Number of queues preempted on the port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.44

alaQoSPortRowStatus

Used to create/delete ports according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.45

alaQoSPortFirPrio0EnqBytes

Firenze priority 0 enqueue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.46

alaQoSPortFirPrio0DeqBytes

Firenze priority 0 dequeue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.47

alaQoSPortFirPrio0EnqPkts

Firenze priority 0 enqueue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.48

alaQoSPortFirPrio0DeqPkts

Firenze priority 0 dequeue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.49

alaQoSPortFirPrio0QidDiscardPkts

Firenze priority 0 QID discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.50

alaQoSPortFirPrio0WredDiscardPkts

Firenze priority 0 WRED discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.51

alaQoSPortFirPrio0OverflowDiscardPkts

Firenze priority 0 overflow discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.52

alaQoSPortFirPrio1EnqBytes

Firenze priority 1 enqueue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.53

alaQoSPortFirPrio1DeqBytes

Firenze priority 1 dequeue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.54

alaQoSPortFirPrio1EnqPkts

Firenze priority 1 enqueue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.55

alaQoSPortFirPrio1DeqPkts

Firenze priority 1 dequeue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.56

alaQoSPortFirPrio1QidDiscardPkts

Firenze priority 1 QID discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.57

alaQoSPortFirPrio1WredDiscardPkts

Firenze priority 1 WRED discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.58

alaQoSPortFirPrio1OverflowDiscardPkts

Firenze priority 1 overflow discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.59

alaQoSPortFirPrio2EnqBytes

Firenze priority 2 enqueue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.60

alaQoSPortFirPrio2DeqBytes

Firenze priority 2 dequeue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.61

alaQoSPortFirPrio2EnqPkts

Firenze priority 2 enqueue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.62

alaQoSPortFirPrio2DeqPkts

Firenze priority 2 dequeue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.63

alaQoSPortFirPrio2QidDiscardPkts

Firenze priority 2 QID discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.64

alaQoSPortFirPrio2WredDiscardPkts

Firenze priority 2 WRED discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.65

alaQoSPortFirPrio2OverflowDiscardPkts

Firenze priority 2 overflow discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.66

alaQoSPortFirPrio3EnqBytes

Firenze priority 3 enqueue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.67

alaQoSPortFirPrio3DeqBytes

Firenze priority 3 dequeue byte count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.68

alaQoSPortFirPrio3EnqPkts

Firenze priority 3 enqueue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.69

alaQoSPortFirPrio3DeqPkts

Firenze priority 3 dequeue packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.70

alaQoSPortFirPrio3QidDiscardPkts

Firenze priority 3 QID discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.71

alaQoSPortFirPrio3WredDiscardPkts

Firenze priority 3 WRED discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.72

alaQoSPortFirPrio3OverflowDiscardPkts

Firenze priority 3 overflow discard packet count

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.73

alaQoSPortDefaultClassification

Ingress traffic classification parameter for Firenze port
What field to interpret as priority for WRED

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.74

alaQoSPortLowPriorityWeight

Weight to use for low priority egress queue on fixed queue blades.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.75

alaQoSPortMediumPriorityWeight

Weight to use for medium priority egress queue on fixed queue blades.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.76

alaQoSPortHighPriorityWeight

Weight to use for high priority egress queue on fixed queue blades.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.77

alaQoSPortUrgentPriorityWeight

Weight to use for urgent priority egress queue on fixed queue blades.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.78

alaQoSPortMaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this port

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.79

alaQoSPortMaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.80

alaQoSPortEnqueuingThresholdP0Lower

Priority 0 FIFO lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.81

alaQoSPortEnqueuingThresholdP0Upper

Priority 0 FIFO upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.82

alaQoSPortEnqueuingThresholdP1Lower

Priority 1 FIFO lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.83

alaQoSPortEnqueuingThresholdP1Upper

Priority 1 FIFO upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.84

alaQoSPortEnqueuingThresholdP2Lower

Priority 2 FIFO lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.85

alaQoSPortEnqueuingThresholdP2Upper

Priority 2 FIFO upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.86

alaQoSPortEnqueuingThresholdP3Lower

Priority 3 FIFO lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.87

alaQoSPortEnqueuingThresholdP3Upper

Priority 3 FIFO upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.88

alaQoSPortEnqueuingThresholdStatus

Status field indicating whether enqueuing thresholds need
to be enforced on high density module.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.89

alaQoSPortHighDensity

Indicates whether this is a high-density port or not.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.90

alaQoSPortServicingMode

Servicing mode for the port

Enumerationr/w

Enumerated Values:

0	default
1	strictpriority
2	prioritywrr
3	wrr
4	drr

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.91

alaQoSPortFreeFFPRules

Number of Free FPP rule entries

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.92

alaQoSPortUsedFFPRules

Number of Used FPP rule entries

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.93

alaQoSPortFreeFFPMasks

Number of Free FPP mask entries

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.94

alaQoSPortUsedFFPMasks

Number of Free FPP mask enries

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.95

alaQoSPortSpoofedCount

Spoofed packet count

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.96

alaQoSPortNonSpoofedCount

Non-spoofed packet count

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.97

alaQoSPortQ4PriorityWeight

Weight to use for cos queue 4.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.98

alaQoSPortQ5PriorityWeight

Weight to use for cos queue 5.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.99

alaQoSPortQ6PriorityWeight

Weight to use for cos queue 6.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.100

alaQoSPortQ7PriorityWeight

Weight to use for cos queue 7.

Integer32r/w

Constraints:
range: 0-15

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.101

alaQoSPortCOS0MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.102

alaQoSPortCOS0MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.103

alaQoSPortCOS1MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.104

alaQoSPortCOS1MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.105

alaQoSPortCOS2MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.106

alaQoSPortCOS2MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.107

alaQoSPortCOS3MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.108

alaQoSPortCOS3MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.109

alaQoSPortCOS4MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.110

alaQoSPortCOS4MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.111

alaQoSPortCOS5MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.112

alaQoSPortCOS5MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.113

alaQoSPortCOS6MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.114

alaQoSPortCOS6MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.115

alaQoSPortCOS7MaximumBandwidth

Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.116

alaQoSPortCOS7MaximumBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.117

alaQoSPortCOS0MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.118

alaQoSPortCOS0MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.119

alaQoSPortCOS1MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.120

alaQoSPortCOS1MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.121

alaQoSPortCOS2MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.122

alaQoSPortCOS2MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.123

alaQoSPortCOS3MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.124

alaQoSPortCOS3MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.125

alaQoSPortCOS4MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.126

alaQoSPortCOS4MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.127

alaQoSPortCOS5MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.128

alaQoSPortCOS5MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.129

alaQoSPortCOS6MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.130

alaQoSPortCOS6MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.131

alaQoSPortCOS7MinimumBandwidth

Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.132

alaQoSPortCOS7MinimumBandwidthStatus

Status field indicating whether to enforce
minimum bandwidth on queue.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.133

alaQoSPortMaximumIngBandwidth

Maximum igress bandwidth (Kbits/sec).
Maximum rate to recieve traffic in on this port

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.134

alaQoSPortMaximumIngBandwidthStatus

Status field indicating whether to enforce
maximum bandwidth on port.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.135

alaQoSPortDEIMarking

This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).

enabled(1) -- the DEI/CFI bit will be set in egres…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.136

alaQoSPortMonitor

This object is used to monitor a slot/port on which user is interested
to get the cos egress statistics.

enabled(1) -- monitor the slot/port to gather per port cos egress
statistics.
disabled(2) -…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.137

alaQoSPortDEIMapping

This object specifies if, in ingress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).

enabled(1) -- the DEI/CFI bit will be set in ingres…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.138

alaQoSQueueTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32 · 1 row entry · 19 columns

Open in standard view

Table of QoS Queue definitions

alaQoSQueueEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1

Definition of QoS Queue

Indexes

alaQoSQueueId

Column Syntax OID

alaQoSQueueId

Internal queue identifier

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.1

alaQoSQueueSlot

Physical slot queue is destined to

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.2

alaQoSQueuePort

Physical port queue is destined to

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.3

alaQoSQueuePortId

Internal global port id of destination port

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.4

alaQoSQueueType

Type of queueing done on this queue

Enumeration

Enumerated Values:

1	mammoth
2	priority
3	spwrr
4	wrr
5	drr

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.5

alaQoSQueuePriority

Queueing priority for the queue

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.6

alaQoSQueueMinimumBandwidth

Minimum bandwidth (Kbits/sec) given to the queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.7

alaQoSQueueMaximumBandwidth

Maximum bandwidth (Kbits/sec) given to the queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.8

alaQoSQueueAverageBandwidth

Average measured bandwidth (Kbits/sec) for the queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.9

alaQoSQueueMinimumDepth

Minimum depth (Kbytes) of the queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.10

alaQoSQueueMaximumDepth

Maximum depth (Kbytes) of the queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.11

alaQoSQueueMaximumBuffers

Maximum number of buffers for the queue

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.12

alaQoSQueue8021p

802.1p value queue places on traffic

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.13

alaQoSQueuePacketsSent

Number of packets sent through the queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.14

alaQoSQueuePacketsDropped

Number of packets dropped trying to queue into this queue

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.15

alaQoSQueueMaxLength

Maximum measured length the queue has reached in buffers

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.16

alaQoSQueueAverageLength

Average measured length of the queue in buffers

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.17

alaQoSQueueCurrentLength

Current measured length of the queue in buffers

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.18

alaQoSQueueAction

Name of the action this queue was created from

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.19

alaQoSSlotTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33 · 1 row entry · 33 columns

Open in standard view

Table of QoS Slot definitions

alaQoSSlotEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1

Definition of QoS Slot

Indexes

alaQoSSlotSlot alaQoSSlotSlice

Column Syntax OID

alaQoSSlotSlot

Physical slot number

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.1

alaQoSSlotSlice

Physical device number on slot

Integer32

Constraints:
range: 0-4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.2

alaQoSSlotType

Type of hardware in this slot/slice

Enumeration

Enumerated Values:

1	mammoth
2	kodiak
3	mailbox
4	coronado
5	ixe2424
6	kite
7	fuji

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.3

alaQoSSlotMaxBuffers

Maximum total buffers on this slot/slice

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.4

alaQoSSlotFreeBuffers1

Current free buffers in list 1

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.5

alaQoSSlotFreeBuffers2

Current free buffers in list 2

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.6

alaQoSSlotThreshold1Low

Buffer are not given to low priority traffic from list 1
when free buffers in list 1 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.7

alaQoSSlotThreshold1Medium

Buffer are not given to medium priority traffic from list 1
when free buffers in list 1 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.8

alaQoSSlotThreshold1High

Buffer are not given to high priority traffic from list 1
when free buffers in list 1 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.9

alaQoSSlotThreshold1Urgent

Buffer are not given to urgent priority traffic from list 1
when free buffers in list 1 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.10

alaQoSSlotThreshold2Low

Buffer are not given to low priority traffic from list 2
when free buffers in list 2 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.11

alaQoSSlotThreshold2Medium

Buffer are not given to medium priority traffic from list 2
when free buffers in list 2 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.12

alaQoSSlotThreshold2High

Buffer are not given to high priority traffic from list 2
when free buffers in list 2 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.13

alaQoSSlotThreshold2Urgent

Buffer are not given to urgent priority traffic from list 2
when free buffers in list 2 is less than this threshold.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.14

alaQoSSlotBuffersDenied

Buffers denied on this slot

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.15

alaQoSSlotBuffersDeniedAverage

Average number of denied buffers over time

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.16

alaQoSSlotBuffersDropped

Buffers dropped on this slot

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.17

alaQoSSlotBuffersDroppedAverage

Average number of dropped buffers over time

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.18

alaQoSSlotWredThresholdP0Lower

Priority 0 WRED lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.19

alaQoSSlotWredThresholdP0Upper

Priority 0 WRED upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.20

alaQoSSlotWredThresholdP1Lower

Priority 1 WRED lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.21

alaQoSSlotWredThresholdP1Upper

Priority 1 WRED upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.22

alaQoSSlotWredThresholdP2Lower

Priority 2 WRED lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.23

alaQoSSlotWredThresholdP2Upper

Priority 2 WRED upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.24

alaQoSSlotWredThresholdP3Lower

Priority 3 WRED lower threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.25

alaQoSSlotWredThresholdP3Upper

Priority 3 WRED upper threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.26

alaQoSSlotWredAverageCounterWeight

The weight used in the WRED algorithm. It is used as a
negative power of 2

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.27

alaQoSSlotWredThresholdStatus

Status field indicating whether WRED maximum thresholds
are specified(enable) or not(disable).

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.28

alaQoSSlotCbqThresholdMode

Servicing mode for the CBQ thresholds for high density modules

Enumerationr/w

Enumerated Values:

1	prioritywrr
2	wrr
3	strictpriority

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.29

alaQoSSlotCbqThresholdP1

Priority 1 CBQ threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.30

alaQoSSlotCbqThresholdP2

Priority 2 CBQ threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.31

alaQoSSlotCbqThresholdP3

Priority 3 CBQ threshold for high density module

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.32

alaQoSSlotHighDensity

Indicates whether this is a high-density slice or not.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.33

alaQoSSlotProtocolTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35 · 1 row entry · 7 columns

Open in standard view

Table of QoS SlotProtocol definitions

alaQoSSlotProtocolEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1

Definition of QoS SlotProtocol

Indexes

alaQoSSlotSlot alaQoSSlotSlice alaQoSSlotProtocolId

Column Syntax OID

alaQoSSlotProtocolId

Used on high density module classification in the MAC.
This is the protocol ID used between the CAM and
priority descriptors.

Enumeration

Enumerated Values:

1	user1
2	user2
3	user3
4	user4
5	unknown

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.1

alaQoSSlotProtocolEthertype

Used on high density module classification in the MAC.
This is the Ethernet type used between the CAM for
classification.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.2

alaQoSSlotProtocolDsap

Used on high density module classification in the MAC.
This is the destination SAP in an 802.3 packet.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.3

alaQoSSlotProtocolSsap

Used on high density module classification in the MAC.
This is the source SAP in an 802.3 packet.

Integer32r/w

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.4

alaQoSSlotProtocol8023Enabled

Used on high density module classification in the MAC.
This will enable 802.3 checking on the CAM entry.

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.5

alaQoSSlotProtocolType

Used on high density module classification in the MAC.
This positions the CAM entry in the list. Priority will
put the entries in the front of the CAM, giving it priority.
fallback will put the entry at the end.

Enumerationr/w

Enumerated Values:

1	priority
2	fallback

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.6

alaQoSSlotProtocolRowStatus

Used to create/delete slot protoocols according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.7

alaQoSPortProtocolTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36 · 1 row entry · 11 columns

Open in standard view

Table of QoS PortProtocol definitions

alaQoSPortProtocolEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1

Definition of QoS PortProtocol

Indexes

alaQoSPortSlot alaQoSPortPort alaQoSPortProtocolId

Column Syntax OID

alaQoSPortProtocolId

Used on high density module classification in the MAC. This
is the protocol id that needs to be changed.

Enumeration

Enumerated Values:

1	bpdu
2	lcpsnap
3	lcpeth
4	ipv4
5	arp
6	rarp
7	ipv6
8	ipx
9	apple
10	sna
11	decnet
12	user1
13	user2
14	user3
15	user4

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.1

alaQoSPortProtocolClassification

Used on high density module classification in the MAC. This
determines what type of classification is used to find
priority.

Enumerationr/w

Enumerated Values:

1	b8021p
2	tos
3	dscp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.2

alaQoSPortProtocolPriorityP0

Used on high density module classification in the MAC. This
is the new priority for P0 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.3

alaQoSPortProtocolPriorityP1

Used on high density module classification in the MAC. This
is the new priority for P1 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.4

alaQoSPortProtocolPriorityP2

Used on high density module classification in the MAC. This
is the new priority for P2 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.5

alaQoSPortProtocolPriorityP3

Used on high density module classification in the MAC. This
is the new priority for P3 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.6

alaQoSPortProtocolPriorityP4

Used on high density module classification in the MAC. This
is the new priority for P4 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.7

alaQoSPortProtocolPriorityP5

Used on high density module classification in the MAC. This
is the new priority for P5 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.8

alaQoSPortProtocolPriorityP6

Used on high density module classification in the MAC. This
is the new priority for P6 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.9

alaQoSPortProtocolPriorityP7

Used on high density module classification in the MAC. This
is the new priority for P7 to be mapped to.

Integer32r/w

Constraints:
range: 0-3

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.10

alaQoSPortProtocolRowStatus

Used to create/delete rows according to RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.11

alaQoSSlotDscpTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37 · 1 row entry · 2 columns

Open in standard view

Table of QoS SlotDscp definitions

alaQoSSlotDscpEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1

Definition of QoS SlotDscp

Indexes

alaQoSSlotSlot alaQoSSlotSlice alaQoSSlotDscpIndex

Column	Syntax	OID
alaQoSSlotDscpIndex Used on high density module classification in the MAC This is the index into the DSCP table to access.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.1`
alaQoSSlotDscpPriority Used on high density module classification in the MAC. This is the priority of the index of the DSCP table.	Integer32r/w Constraints: `range: 0-3`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.2`

alaQoSSlotPcamTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38 · 1 row entry · 11 columns

Open in standard view

Table of QoS SlotPcam definitions

alaQoSSlotPcamEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1

Definition of QoS SlotPcam

Indexes

alaQoSSlotSlot alaQoSSlotSlice alaQoSSlotPcamId

Column Syntax OID

alaQoSSlotPcamId

Used on high density module classification in the MAC.
This is the index used in the PCAM.

Integer32

Constraints:
range: 0-24

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.1

alaQoSSlotPcamEthertype

Used on high density module classification in the MAC.
This is the Ethernet type in the CAM.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.2

alaQoSSlotPcamDsap

Used on high density module classification in the MAC.
This is the destination SAP in an 802.3 packet.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.3

alaQoSSlotPcamSsap

Used on high density module classification in the MAC.
This is the source SAP in an 802.3 packet.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.4

alaQoSSlotPcam8023Enabled

Used on high density module classification in the MAC.
This will enable 802.3 checking on the CAM entry.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.5

alaQoSSlotPcamProtocolNumber

Used on high density module classification in the MAC.
This identifies the protocol number of the CAM entry.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.6

alaQoSSlotPcamEnableEntry

Used on high density module to enable the pcam entry.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.7

alaQoSSlotPcamEnable8023

Used on high density module to indiciate if 802.3
is enabled in the pcam entry.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.8

alaQoSSlotPcamEnableDsap

Used on high density module to indiciate if DSAP
is enabled in the pcam entry.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.9

alaQoSSlotPcamEnableSsap

Used on high density module to indiciate if SSAP
is enabled in the pcam entry.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.10

alaQoSSlotPcamEnableEthertype

Used on high density module to indiciate if Ethertype
is enabled in the pcam entry.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.11

alaQoSPortPdiTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39 · 1 row entry · 10 columns

Open in standard view

Table of QoS PortPdi definitions

alaQoSPortPdiEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1

Definition of QoS PortPdi

Indexes

alaQoSPortSlot alaQoSPortPort alaQoSPortPdiId

Column	Syntax	OID
alaQoSPortPdiId Used on high density module classification in the MAC. This is the index used in the PDI.	Integer32 Constraints: `range: 0-16`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.1`
alaQoSPortPdiPriorityType Used on high density module classification in the MAC. This is the classification type on the port.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.2`
alaQoSPortPdiPriorityP0 Used on high density module classification in the MAC. This is the internal priority mapping for a P0 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.3`
alaQoSPortPdiPriorityP1 Used on high density module classification in the MAC. This is the internal priority mapping for a P1 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.4`
alaQoSPortPdiPriorityP2 Used on high density module classification in the MAC. This is the internal priority mapping for a P2 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.5`
alaQoSPortPdiPriorityP3 Used on high density module classification in the MAC. This is the internal priority mapping for a P3 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.6`
alaQoSPortPdiPriorityP4 Used on high density module classification in the MAC. This is the internal priority mapping for a P4 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.7`
alaQoSPortPdiPriorityP5 Used on high density module classification in the MAC. This is the internal priority mapping for a P5 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.8`
alaQoSPortPdiPriorityP6 Used on high density module classification in the MAC. This is the internal priority mapping for a P6 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.9`
alaQoSPortPdiPriorityP7 Used on high density module classification in the MAC. This is the internal priority mapping for a P7 packet.	Integer32 Constraints: `range: 0-255`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.10`

alaQoSValidityPeriodTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40 · 1 row entry · 13 columns

Open in standard view

Table of QoS ValidityPeriod definitions

alaQoSValidityPeriodEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1

Definition of QoS ValidityPeriod

Indexes

alaQoSValidityPeriodName

Column Syntax OID

alaQoSValidityPeriodName

Name of validity period

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.1

alaQoSValidityPeriodSource

What entity created the validity period.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.2

alaQoSValidityPeriodDays

Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday
is most significant.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.3

alaQoSValidityPeriodDaysStatus

Status field indicating whether the validity period
has specific active days of the month.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.4

alaQoSValidityPeriodMonths

Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.5

alaQoSValidityPeriodMonthsStatus

Status field indicating whether the validity period
has specific active days of the week.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.6

alaQoSValidityPeriodHour

Time of day this period becomes active.
Format is 'hh:mm'

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.7

alaQoSValidityPeriodHourStatus

Status field indicating whether the validity period
has specific active hours of the day.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.8

alaQoSValidityPeriodEndHour

Time of day this period becomes inactive.
Format is 'hh:mm'

OctetStringr/w

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.9

alaQoSValidityPeriodInterval

Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'

OctetStringr/w

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.10

alaQoSValidityPeriodIntervalStatus

Status field indicating whether the validity period
has a specific active date-time interval.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.11

alaQoSValidityPeriodEndInterval

Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'

OctetStringr/w

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.12

alaQoSValidityPeriodRowStatus

Used to create/delete validity periods according
to the RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.13

alaQoSAppliedValidityPeriodTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41 · 1 row entry · 13 columns

Open in standard view

Table of QoS AppliedValidityPeriod definitions

alaQoSAppliedValidityPeriodEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1

Definition of QoS AppliedValidityPeriod

Indexes

alaQoSAppliedValidityPeriodName

Column Syntax OID

alaQoSAppliedValidityPeriodName

Name of validity period

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.1

alaQoSAppliedValidityPeriodSource

What entity created the validity period.

Enumeration

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.2

alaQoSAppliedValidityPeriodDays

Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday
is most significant.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.3

alaQoSAppliedValidityPeriodDaysStatus

Status field indicating whether the validity period
has specific active days of the month.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.4

alaQoSAppliedValidityPeriodMonths

Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.5

alaQoSAppliedValidityPeriodMonthsStatus

Status field indicating whether the validity period
has specific active days of the week.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.6

alaQoSAppliedValidityPeriodHour

Time of day this period becomes active.
Format is 'hh:mm'

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.7

alaQoSAppliedValidityPeriodHourStatus

Status field indicating whether the validity period
has specific active hours of the day.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.8

alaQoSAppliedValidityPeriodEndHour

Time of day this period becomes inactive.
Format is 'hh:mm'

OctetString

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.9

alaQoSAppliedValidityPeriodInterval

Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'

OctetString

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.10

alaQoSAppliedValidityPeriodIntervalStatus

Status field indicating whether the validity period
has a specific active date-time interval.

Enumeration

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.11

alaQoSAppliedValidityPeriodEndInterval

Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'

OctetString

Constraints:
range: 0-19

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.12

alaQoSAppliedValidityPeriodRowStatus

Used to create/delete validity periods according
to the RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.13

alaQoSImportTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42 · 1 row entry · 9 columns

Open in standard view

Table of QoS Import definitions

alaQoSImportEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1

Definition of QoS Import

Indexes

alaQoSImportIndex alaQoSImportText

Column Syntax OID

alaQoSImportIndex

Index of entry in import list

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.1

alaQoSImportText

Text or filename to import

OctetString

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.2

alaQoSImportPrecedence

Precedence to use for policies imported from file

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.3

alaQoSImportPrefix

Prefix for policy names that are imported

OctetStringr/w

Constraints:
range: 0-11

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.4

alaQoSImportSlot

Slot on which to apply imported policy(s)

Integer32r/w

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.5

alaQoSImportPort

Starting port on which to apply imported policy(s)

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.6

alaQoSImportPortend

Ending port on which to apply imported policy(s)

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.7

alaQoSImportPortgroup

Portgroup on which to apply imported policy(s)

OctetStringr/w

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.8

alaQoSImportRowStatus

Used to create/delete imports according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.9

alaQoSAppliedImportTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43 · 1 row entry · 9 columns

Open in standard view

Table of QoS AppliedImport definitions

alaQoSAppliedImportEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1

Definition of QoS AppliedImport

Indexes

alaQoSAppliedImportIndex alaQoSAppliedImportText

Column Syntax OID

alaQoSAppliedImportIndex

Index of entry in import list

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.1

alaQoSAppliedImportText

Text or filename to import

OctetString

Constraints:
range: 0-63

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.2

alaQoSAppliedImportPrecedence

Precedence to use for policies imported from file

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.3

alaQoSAppliedImportPrefix

Prefix for policy names that are imported

OctetString

Constraints:
range: 0-11

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.4

alaQoSAppliedImportSlot

Slot on which to apply imported policy(s)

Integer32

Constraints:
range: 0-52

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.5

alaQoSAppliedImportPort

Starting port on which to apply imported policy(s)

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.6

alaQoSAppliedImportPortend

Ending port on which to apply imported policy(s)

Integer32

Constraints:
range: 0-16

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.7

alaQoSAppliedImportPortgroup

Portgroup on which to apply imported policy(s)

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.8

alaQoSAppliedImportRowStatus

Used to create/delete imports according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.9

alaQoSRuleGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44 · 1 row entry · 5 columns

Open in standard view

Table of QoS RuleGroups definitions

alaQoSRuleGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1

Definition of QoS RuleGroups

Indexes

alaQoSRuleGroupsName

Column Syntax OID

alaQoSRuleGroupsName

Name of rule group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.1

alaQoSRuleGroupsSource

What entity created the rule group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.2

alaQoSRuleGroupsType

Type of rule group.

Enumerationr/w

Enumerated Values:

1	default
2	unp
3	vrf
4	ingress
5	egress
6	slb

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.3

alaQoSRuleGroupsEnabled

Is this rule grop enabled or not

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.4

alaQoSRuleGroupsStatus

Used to create/delete rule groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.5

alaQoSAppliedRuleGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45 · 1 row entry · 5 columns

Open in standard view

Table of QoS AppliedRuleGroups definitions

alaQoSAppliedRuleGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1

Definition of QoS AppliedRuleGroups

Indexes

alaQoSAppliedRuleGroupsName

Column Syntax OID

alaQoSAppliedRuleGroupsName

Name of rule group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.1

alaQoSAppliedRuleGroupsSource

What entity created the service group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.2

alaQoSAppliedRuleGroupsType

What entity created the rule group.

Enumeration

Enumerated Values:

1	defualt
2	unp
3	vrf
4	ingress
5	egress
6	slb

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.3

alaQoSAppliedRuleGroupsEnabled

Is this rule grop enabled or not

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.4

alaQoSAppliedRuleGroupsStatus

Used to create/delete rule groups according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.5

alaQoSRuleGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46 · 1 row entry · 10 columns

Open in standard view

Table of QoS RuleGroup definitions

alaQoSRuleGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1

Definition of QoS RuleGroup

Indexes

alaQoSRuleGroupsName alaQoSRuleGroupRuleName

Column Syntax OID

alaQoSRuleGroupRuleName

Name of rule in rule group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.1

alaQoSRuleGroupMatches

Number of times this rule has been matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.2

alaQoSRuleGroupCountType

Which rule statistics counters to update if not all are available

Enumerationr/w

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.3

alaQoSRuleGroupPacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.4

alaQoSRuleGroupByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.5

alaQoSRuleGroupStatus

Used to create/delete rule group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.6

alaQoSRuleGroupPacketRate

Packets mathcing the rule per second .

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.7

alaQoSRuleGroupBitRate

Bytes mathcing the rule per second .

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.8

alaQoSRuleGroupAccPacketCount

Counter for packets matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.9

alaQoSRuleGroupAccByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.10

alaQoSAppliedRuleGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47 · 1 row entry · 10 columns

Open in standard view

Table of QoS AppliedRuleGroup definitions

alaQoSAppliedRuleGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1

Definition of QoS AppliedRuleGroup

Indexes

alaQoSAppliedRuleGroupsName alaQoSAppliedRuleGroupRuleName

Column Syntax OID

alaQoSAppliedRuleGroupRuleName

Name of rule in rule group entry

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.1

alaQoSAppliedRuleGroupMatches

Number of times this rule has been matched.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.2

alaQoSAppliedRuleGroupCountType

Which rule statistics counters to update if not all are available

Enumerationr/w

Enumerated Values:

1	packets
2	bytes

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.3

alaQoSAppliedRuleGroupPacketCount

Counter for packets patching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.4

alaQoSAppliedRuleGroupByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.5

alaQoSAppliedRuleGroupStatus

Used to create/delete rule group entries according to the
RowStatus convention

SNMPv2-TCRowStatus

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.6

alaQosAppliedRuleGroupPacketRate

Shows the packet rate for policy list

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.7

alaQosAppliedRuleGroupBitRate

Shows the bit rate for policy list

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.8

alaQoSAppliedRuleGroupAccPacketCount

Counter for packets matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.9

alaQoSAppliedRuleGroupAccByteCount

Counter for bytes matching this rule

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.10

alaQoSVlanGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48 · 1 row entry · 3 columns

Open in standard view

Table of QoS Vlan Groups definitions

alaQoSVlanGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1

Definition of QoS Vlan Groups

Indexes

alaQoSVlanGroupsName

Column Syntax OID

alaQoSVlanGroupsName

Name of Vlan group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.1

alaQoSVlanGroupsSource

What entity created the Vlan group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.2

alaQoSVlanGroupsStatus

Used to create/delete Vlan groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.3

alaQoSAppliedVlanGroupsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49 · 1 row entry · 3 columns

Open in standard view

Table of QoS Applied Vlan Groups definitions

alaQoSAppliedVlanGroupsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1

Definition of QoS Applied Vlan Groups

Indexes

alaQoSAppliedVlanGroupsName

Column Syntax OID

alaQoSAppliedVlanGroupsName

Name of Applied Vlan group

OctetString

Constraints:
range: 0-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.1

alaQoSAppliedVlanGroupsSource

What entity created the Vlan group.

Enumerationr/w

Enumerated Values:

1	ldap
2	cli
3	blt
4	api
5	imp

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.2

alaQoSAppliedVlanGroupsStatus

Used to create/delete Vlan groups according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.3

alaQoSVlanGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50 · 1 row entry · 3 columns

Open in standard view

Table of QoS Vlan Group definitions

alaQoSVlanGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1

Definition of QoS Vlan Group

Indexes

alaQoSVlanGroupsName alaQoSVlanGroupVlan alaQoSVlanGroupVlanEnd

Column Syntax OID

alaQoSVlanGroupVlan

Vlan range start for vlan group entry

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.1

alaQoSVlanGroupVlanEnd

Vlan range end for vlan group entry

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.2

alaQoSVlanGroupStatus

Used to create/delete vlan group entries according to the
RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.3

alaQoSAppliedVlanGroupTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51 · 1 row entry · 3 columns

Open in standard view

Table of QoS Applied Vlan Group definitions

alaQoSAppliedVlanGroupEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1

Definition of QoS Applied Vlan Group

Indexes

alaQoSAppliedVlanGroupsName alaQoSAppliedVlanGroupVlan alaQoSAppliedVlanGroupVlanEnd

Column Syntax OID

alaQoSAppliedVlanGroupVlan

Vlan range start for vlan group entry

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.1

alaQoSAppliedVlanGroupVlanEnd

Vlan range end for vlan group entry

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.2

alaQoSAppliedVlanGroupStatus

Used to create/delete vlan group entries according
to the RowStatus convention

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.3

alaQoSHwLoopbackProfileTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52 · 1 row entry · 9 columns

Open in standard view

Table of QoS Hw Loopback Profiles

alaQoSHwLoopbackProfileEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1

Definition of QoS Hw Loopback Profiles

Indexes

alaQoSHwLoopbackProfileName

Column Syntax OID

alaQoSHwLoopbackProfileName

Name of Profile Name

OctetString

Constraints:
range: 1-31

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.1

alaQoSHwLoopbackSourceMac

Source MAC address to use for Hardware Loopback
profile configuration

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.2

alaQoSHwLoopbackDestinationMac

Destination MAC address to use for Hardware Loopback
profile configuration

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.3

alaQoSHwLoopbackVlan

Vlan used in Hardware Loopback Profile Config

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.4

alaQoSHwLoopbackPort

Loopback Port ifindex used in Hardware Loopback Profile Config

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.5

alaQoSHwLoopbackType

The type of Hardware Profile Config, inward and outward

Enumerationr/w

Enumerated Values:

1	inward
2	outward

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.6

alaQoSHwLoopbackProfileStatus

The status of the Hardware Profile Config

Enumerationr/w

Enumerated Values:

0	config
1	start
2	stop

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.7

alaQoSHwLoopbackProfileRowStatus

Used to create/delete the Profile Config

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.8

alaQosHwLoopbackSapId

A Number given to uniquely identify the SAP.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.9

alaQoSQueueStatsTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53 · 1 row entry · 11 columns

Open in standard view

Table of QoS Queue Stats definitions

alaQoSQueueStatsEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1

Definition of QoS Queue Stats

Indexes

alaQoSQueueStatsId

Column Syntax OID

alaQoSQueueStatsId

Internal queue identifier

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.1

alaQoSQueueStatsSlot

Physical slot queue is destined to

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.2

alaQoSQueueStatsPort

Physical port queue is destined to

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.3

alaQoSQueueStatsTransmitQueue

Transmit queue number

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.4

alaQoSQueueStatsPriority

Transmit priority for the queue

Enumeration

Enumerated Values:

1	high
2	low

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.5

alaQoSQueueStatsPacketsSent

Number of packets sent through the queue

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.6

alaQoSQueueStatsPacketsDropped

Number of packets dropped trying to queue into this queue

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.7

alaQoSQueueStatsBytesSent

Number of bytes sent through the queue

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.8

alaQoSQueueStatsBytesDropped

Number of bytes dropped trying to queue into this queue

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.9

alaQoSQueueStatsRateSent

Rate(Mbits/sec) sent through the queue

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.10

alaQoSQueueStatsRateDropped

Rate(Mbits/sec) dropped trying to queue into this queue

SNMPv2-SMICounter64

Textual Convention: SNMPv2-SMICounter64 Unsigned64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.11

alaQoSExtendedRuleTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54 · 1 row entry · 12 columns

Open in standard view

Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis

alaQoSExtendedRuleEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1

Definition of QoS Rule

Indexes

alaQoSRuleName alaQoSExtendedRuleSlot alaQoSExtendedRulePort

Column	Syntax	OID
alaQoSExtendedRuleSlot Slot on which rate-limit is enabled.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.1`
alaQoSExtendedRulePort Port on which rate-limit is enabled.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.2`
alaQoSExtendedRuleMatches Number of times this rule has been matched.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.3`
alaQoSExtendedRulePacketCount Counter for packets matching this rule	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.4`
alaQoSExtendedRuleByteCount Counter for bytes matching this rule	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.5`
alaQoSExtendedRuleExcessPacketCount Counter for packets out of the bandwidth parameters	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.6`
alaQoSExtendedRuleExcessByteCount Counter for bytes out of the bandwidth parameters	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.7`
alaQoSExtendedRuleGreenCount Counter for the number of packets which are green compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.8`
alaQoSExtendedRuleYellowCount Counter for the number of packets which are yellow compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.9`
alaQoSExtendedRuleRedCount Counter for the number of packets which are red compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.10`
alaQoSExtendedRuleNonGreenCount Counter for the number of packets which are non-green compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.11`
alaQoSExtendedRuleNonRedCount Counter for the number of packets which are non-red compliant.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.12`

alaQoSDSCPTable

table

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55 · 1 row entry · 4 columns

Open in standard view

Table of QoS Condition definitions

alaQoSDSCPEntry entry .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1

Definition of QoS DSCP

Indexes

alaQoSDSCPEntryNumber

Column Syntax OID

alaQoSDSCPEntryNumber

DSCP Entry number for the traffic.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.1

alaQoSDSCPPriority

DSCP priority for the traffic.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.2

alaQoSDSCPDropPrecedence

DSCP drop precedence for the traffic.

Enumerationr/w

Enumerated Values:

1	low
2	medium
3	high

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.3

alaQoSDSCPRowStatus

RowStatus entry for QoS DSCP.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.4