alaQoSAppliedActionDropAlgorithm
ALCATEL-IND1-QOS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4
Object
column
Enumeration
Which drop algorithm should be used to discard traffic when oversubscribed.
Context
- MIB
- ALCATEL-IND1-QOS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alaQoSAppliedActionEntry
- Table
- alaQoSAppliedActionTable
- Siblings
- 82
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | tail |
2 | wred |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaQoSAppliedActionName Name of action | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.1 |
| alaQoSAppliedActionWredMaximumProbabilityStatus Status field indicating whether WRED maximum probability
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.10 |
| alaQoSAppliedActionMinimumBandwidth Minimum bandwidth (Kbits/sec) to guarantee for traffic | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.11 |
| alaQoSAppliedActionMinimumBandwidthStatus Status field indicating whether minimum bandwidth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.12 |
| alaQoSAppliedActionMaximumBandwidth Maximum bandwidth (Kbits/sec) allowed for traffic | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.13 |
| alaQoSAppliedActionMaximumBandwidthStatus Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.14 |
| alaQoSAppliedActionPeakBandwidth Peak bandwidth (Kbits/sec) allowed for traffic | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.15 |
| alaQoSAppliedActionPeakBandwidthStatus Status field indicating whether peak bandwidth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.16 |
| alaQoSAppliedActionPriority Internal and queueing priority to use for traffic. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.17 |
| alaQoSAppliedActionPriorityStatus Status field indicating whether priority
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.18 |
| alaQoSAppliedActionShared When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.19 |
| alaQoSAppliedActionSource What entity created the action. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.2 |
| alaQoSAppliedActionJitter Maximum jitter to allow for traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.20 |
| alaQoSAppliedActionJitterStatus Status field indicating whether jitter
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.21 |
| alaQoSAppliedActionLatency Maximum latency to allow for traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.22 |
| alaQoSAppliedActionLatencyStatus Status field indicating whether latency
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.23 |
| alaQoSAppliedActionMaximumDepth Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.24 |
| alaQoSAppliedActionMaximumDepthStatus Status field indicating whether maximum depth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.25 |
| alaQoSAppliedActionMaximumBuffers Maxmimum buffers for queues for traffic. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.26 |
| alaQoSAppliedActionMaximumBuffersStatus Status field indicating whether maximum buffers
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.27 |
| alaQoSAppliedAction8021p 802.1p value to stamp on traffic. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.28 |
| alaQoSAppliedAction8021pStatus Status field indicating whether 802.1p
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.29 |
| alaQoSAppliedActionDisposition Disposition of traffic using the action.
Use to filter out unwanted traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.3 |
| alaQoSAppliedActionTos TOS value to stamp on traffic. (High 3 bits of TOS byte) | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.30 |
| alaQoSAppliedActionTosStatus Status field indicating whether TOS
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.31 |
| alaQoSAppliedActionDscp TOS value to stamp on traffic. (High 6 bits of TOS byte) | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.32 |
| alaQoSAppliedActionDscpStatus Status field indicating whether DSCP
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.33 |
| alaQoSAppliedActionMapFrom What field to use as key for mapping 802.1p/TOS/DSCP priorities | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.34 |
| alaQoSAppliedActionMapTo What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.35 |
| alaQoSAppliedActionMapGroup Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.36 |
| alaQoSAppliedActionMapGroupStatus Status field indicating whether a map group
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.37 |
| alaQoSAppliedActionSourceRewriteIpAddr Source IP address to rewrite on traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.38 |
| alaQoSAppliedActionSourceRewriteIpAddrStatus Status field indicating whether source rewrite IP address & mask
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.39 |
| alaQoSAppliedActionSourceRewriteIpMask Source rewrite IP mask to determine how much of
source IP to rewrite. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.40 |
| alaQoSAppliedActionSourceRewriteNetworkGroup Name of network group containing source address/masks to rewrite
on traffic. Must be a one to on correspondence with
source network group entries in the condition. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.41 |
| alaQoSAppliedActionSourceRewriteNetworkGroupStatus Status field indicating whether source rewrite network group
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.42 |
| alaQoSAppliedActionDestinationRewriteIpAddr Destination IP address to rewrite on traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.43 |
| alaQoSAppliedActionDestinationRewriteIpAddrStatus Status field indicating whether destination rewrite IP address
& mask is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.44 |
| alaQoSAppliedActionDestinationRewriteIpMask Destination rewrite IP mask to determine how much of
destination IP to rewrite. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.45 |
| alaQoSAppliedActionDestinationRewriteNetworkGroup Name of network group containing destination address/masks to
rewrite on traffic. Must be a one to on correspondence with
destination network group entries in the condition. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.46 |
| alaQoSAppliedActionDestinationRewriteNetworkGroupStatus Status field indicating whether destination rewrite network
group is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.47 |
| alaQoSAppliedActionLoadBalanceGroup Name of load balance group to use for traffic | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48 |
| alaQoSAppliedActionLoadBalanceGroupStatus Status field indicating whether load balanace group
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49 |
| alaQoSAppliedActionWredMaximumThreshold Bandwidth at which WRED should discard most traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.5 |
| alaQoSAppliedActionPermanentGatewayIpAddr Next hop gateway to use for traffic | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.50 |
| alaQoSAppliedActionPermanentGatewayIpAddrStatus Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.51 |
| alaQoSAppliedActionAlternateGatewayIpAddr Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.52 |
| alaQoSAppliedActionAlternateGatewayIpAddrStatus Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.53 |
| alaQoSAppliedActionRowStatus Used to create/delete actions according to the
RowStatus convention | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.54 |
| alaQoSAppliedActionMinimumDepth Minimum depth (Kbytes) of queues for traffic.
Used for CBS in tri-color marker applications. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.55 |
| alaQoSAppliedActionMinimumDepthStatus Status field indicating whether minimum depth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.56 |
| alaQoSAppliedActionVPNAccess How to encrypt traffic | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.57 |
| alaQoSAppliedActionNocache When enabled, don't make hardware entries for matching flows. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.58 |
| alaQoSAppliedActionPortdisable When enabled, disable the physical source port of the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.59 |
| alaQoSAppliedActionWredMaximumThresholdStatus Status field indicating whether WRED maximum threshold
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.6 |
| alaQoSAppliedActionRedirectSlot Destination physical slot for redirected traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.60 |
| alaQoSAppliedActionRedirectSlotStatus Status for alaQoSAppliedActionRedirectSlotStatus field | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.61 |
| alaQoSAppliedActionRedirectPort Destination physical port for redirected traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.62 |
| alaQoSAppliedActionRedirectAgg Destination linkagg for redirected traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.63 |
| alaQoSAppliedActionRedirectAggStatus Status for alaQoSAppliedActionRedirectAggStatus field | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.64 |
| alaQoSAppliedActionMirrorSlot Destination physical slot for mirrored traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.65 |
| alaQoSAppliedActionMirrorPort Destination physical port for mirrored traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.66 |
| alaQoSAppliedActionMirrorMode Mirroring mode | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.67 |
| alaQoSAppliedActionMirrorModeStatus Status for alaQoSAppliedActionMirrorMode field | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.68 |
| alaQoSAppliedActionCIR Committed Information Rate - bandwidth values in kilobits per second. | column | kilobits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.69 |
| alaQoSAppliedActionWredMinimumThreshold Bandwidth at which WRED should start to discard traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7 |
| alaQoSAppliedActionCIRStatus Status field indicating whether CIR value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.70 |
| alaQoSAppliedActionCBS Committed Burst Size - bucket size in byte. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.71 |
| alaQoSAppliedActionCBSStatus Status field indicating whether CBS value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.72 |
| alaQoSAppliedActionPIR Peak Information Rate - bandwidth values in kilobits per second. | column | kilobits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.73 |
| alaQoSAppliedActionPIRStatus Status field indicating whether PIR value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.74 |
| alaQoSAppliedActionPBS Peak Burst Size - bucket size in byte. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.75 |
| alaQoSAppliedActionPBSStatus Status field indicating whether PBS value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.76 |
| alaQoSAppliedActionCounterColor Specifies the color mode for the counters which will be used for sr/trTCM. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.77 |
| alaQoSAppliedActionRTCPMonitor RTCP Monitor status for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.78 |
| alaQoSAppliedActionRTCPMonitorStatus Status of the RTCP Monitor field for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.79 |
| alaQoSAppliedActionWredMinimumThresholdStatus Status field indicating whether WRED minimum threshold
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.8 |
| alaQoSAppliedActionRTCPDSCP RTCP DSCP number for the traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.80 |
| alaQoSAppliedActionRTCPDSCPStatus Status of the RTCP DSCP field for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.81 |
| alaQoSAppliedActionTrustDSCP Trust DSCP status for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.82 |
| alaQoSAppliedActionTrustDSCPStatus Status of the Trust DSCP field for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.83 |
| alaQoSAppliedActionWredMaximumProbability Probabilty that traffic will be dropped at WRED
maximum threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.9 |