alaQoSPortAppliedMaximumSignalledBandwidth
ALCATEL-IND1-QOS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15
Object
column
SNMPv2-SMIInteger32
Current maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth.
Context
- MIB
- ALCATEL-IND1-QOS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alaQoSPortEntry
- Table
- alaQoSPortTable
- Siblings
- 137
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaQoSPortSlot Physical slot port resides on | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.1 |
| alaQoSPortMaximumReservedBandwidthStatus Pending status field indicating whether to enforce
maximum reservable bandwidth on next 'Apply' | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.10 |
| alaQoSPortQ6PriorityWeight Weight to use for cos queue 6. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.100 |
| alaQoSPortQ7PriorityWeight Weight to use for cos queue 7. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.101 |
| alaQoSPortCOS0MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.102 |
| alaQoSPortCOS0MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.103 |
| alaQoSPortCOS1MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.104 |
| alaQoSPortCOS1MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.105 |
| alaQoSPortCOS2MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.106 |
| alaQoSPortCOS2MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.107 |
| alaQoSPortCOS3MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.108 |
| alaQoSPortCOS3MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.109 |
| alaQoSPortAppliedMaximumReservedBandwidth Current maximum reservable bandwidth on the port.
Policies can reserve up to this much bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.11 |
| alaQoSPortCOS4MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.110 |
| alaQoSPortCOS4MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.111 |
| alaQoSPortCOS5MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.112 |
| alaQoSPortCOS5MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.113 |
| alaQoSPortCOS6MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.114 |
| alaQoSPortCOS6MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.115 |
| alaQoSPortCOS7MaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.116 |
| alaQoSPortCOS7MaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.117 |
| alaQoSPortCOS0MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.118 |
| alaQoSPortCOS0MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.119 |
| alaQoSPortAppliedMaximumReservedBandwidthStatus Current status field indicating whether to enforce
maximum reservable bandwidth. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.12 |
| alaQoSPortCOS1MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.120 |
| alaQoSPortCOS1MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.121 |
| alaQoSPortCOS2MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.122 |
| alaQoSPortCOS2MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.123 |
| alaQoSPortCOS3MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.124 |
| alaQoSPortCOS3MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.125 |
| alaQoSPortCOS4MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.126 |
| alaQoSPortCOS4MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.127 |
| alaQoSPortCOS5MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.128 |
| alaQoSPortCOS5MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.129 |
| alaQoSPortMaximumSignalledBandwidth Pending maximum signalled bandwidth on the port.
Signalling protocols can reserve up to this much bandwidth.
Does not take effect until an 'Apply' is issued | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.13 |
| alaQoSPortCOS6MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.130 |
| alaQoSPortCOS6MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.131 |
| alaQoSPortCOS7MinimumBandwidth Minimum egress bandwidth (Kbits/sec).
Minimum rate to send traffic out this queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.132 |
| alaQoSPortCOS7MinimumBandwidthStatus Status field indicating whether to enforce
minimum bandwidth on queue. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.133 |
| alaQoSPortMaximumIngBandwidth Maximum igress bandwidth (Kbits/sec).
Maximum rate to recieve traffic in on this port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.134 |
| alaQoSPortMaximumIngBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.135 |
| alaQoSPortDEIMarking This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).
enabled(1) … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.136 |
| alaQoSPortMonitor This object is used to monitor a slot/port on which user is interested
to get the cos egress statistics.
enabled(1) -- monitor the slot/port to gather per port cos… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.137 |
| alaQoSPortDEIMapping This object specifies if, in ingress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).
enabled(1) … | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.138 |
| alaQoSPortMaximumSignalledBandwidthStatus Pending status field indicating whether to enforce
maximum signalled bandwidth on next 'Apply' | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.14 |
| alaQoSPortAppliedMaximumSignalledBandwidthStatus Current status field indicating whether to enforce
maximum signalled bandwidth. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.16 |
| alaQoSPortDefaultQueues Pending number of default queues for the port
Overrides any switch-wide default queue setting | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.17 |
| alaQoSPortAppliedDefaultQueues Current number of default queues for the port
Overrides any switch-wide default queue setting | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.18 |
| alaQoSPortMaximumDefaultBandwidth Pending maximum default bandwidth (Kbits/sec).
Maximum rate for default queues on this port
Does not take effect until an 'Apply' command is issued | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.19 |
| alaQoSPortPort Physical port number | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.2 |
| alaQoSPortMaximumDefaultBandwidthStatus Pending status field indicating whether to enforce
maximum default bandwidth on next 'Apply' | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.20 |
| alaQoSPortAppliedMaximumDefaultBandwidth Current maximum default bandwidth (Kbits/sec).
Maximum rate for default queues this port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.21 |
| alaQoSPortAppliedMaximumDefaultBandwidthStatus Current status field indicating whether to enforce
maximum default bandwidth. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.22 |
| alaQoSPortMaximumDefaultDepth Pending maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port
Does not take effect until an 'Apply' command is issued | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.23 |
| alaQoSPortMaximumDefaultDepthStatus Pending status field indicating whether to enforce
maximum depth on next 'Apply' | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.24 |
| alaQoSPortAppliedMaximumDefaultDepth Current maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.25 |
| alaQoSPortAppliedMaximumDefaultDepthStatus Current status field indicating whether to enforce
maximum depth. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.26 |
| alaQoSPortMaximumDefaultBuffers Pending maximum buffers for egress queues.
Maximum number of buffers for queues on this port
Does not take effect until an 'Apply' command is issued | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.27 |
| alaQoSPortMaximumDefaultBuffersStatus Pending status field indicating whether to enforce
maximum buffers on next 'Apply' | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.28 |
| alaQoSPortAppliedMaximumDefaultBuffers Current maximum buffers for egress queues.
Maximum number of buffers for queues on this port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.29 |
| alaQoSPortEnabled Pending QoS enable status for the physical port
Does not take effect until an 'Apply' command is issued | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.3 |
| alaQoSPortAppliedMaximumDefaultBuffersStatus Current status field indicating whether to enforce
maximum buffers. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.30 |
| alaQoSPortReset Reset all QoS parameters to default values | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.31 |
| alaQoSPortPhysicalBandwidth Physical bandwidth of port (Kbit/sec) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.32 |
| alaQoSPortReservedBandwidth Bandwidth reserved by policies on port (Kbit/sec) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.33 |
| alaQoSPortSignalledBandwidth Bandwidth reserved by signalling on port (Kbit/sec) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.34 |
| alaQoSPortCurrentBandwidth Current measured bandwidth of port (Kbits/sec) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.35 |
| alaQoSPortDefaultQidLow Default low queue ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.36 |
| alaQoSPortDefaultQidMedium Default medium queue ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.37 |
| alaQoSPortDefaultQidHigh Default high queue ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.38 |
| alaQoSPortDefaultQidUrgent Default urgent queue ID | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.39 |
| alaQoSPortAppliedEnabled Current QoS enable status for the physical port | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.4 |
| alaQoSPortFloodQid ID of the flood queue | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.40 |
| alaQoSPortQueues Number of queues currently on the port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.41 |
| alaQoSPortQueuesCreated Number of queue requests on the port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.42 |
| alaQoSPortQueuesFailed Number of queue requests that failed on the port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.43 |
| alaQoSPortQueuesPreempted Number of queues preempted on the port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.44 |
| alaQoSPortRowStatus Used to create/delete ports according to the
RowStatus convention | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.45 |
| alaQoSPortFirPrio0EnqBytes Firenze priority 0 enqueue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.46 |
| alaQoSPortFirPrio0DeqBytes Firenze priority 0 dequeue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.47 |
| alaQoSPortFirPrio0EnqPkts Firenze priority 0 enqueue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.48 |
| alaQoSPortFirPrio0DeqPkts Firenze priority 0 dequeue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.49 |
| alaQoSPortInterfaceType The type of interface QoS matches for this physical port | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.5 |
| alaQoSPortFirPrio0QidDiscardPkts Firenze priority 0 QID discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.50 |
| alaQoSPortFirPrio0WredDiscardPkts Firenze priority 0 WRED discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.51 |
| alaQoSPortFirPrio0OverflowDiscardPkts Firenze priority 0 overflow discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.52 |
| alaQoSPortFirPrio1EnqBytes Firenze priority 1 enqueue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.53 |
| alaQoSPortFirPrio1DeqBytes Firenze priority 1 dequeue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.54 |
| alaQoSPortFirPrio1EnqPkts Firenze priority 1 enqueue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.55 |
| alaQoSPortFirPrio1DeqPkts Firenze priority 1 dequeue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.56 |
| alaQoSPortFirPrio1QidDiscardPkts Firenze priority 1 QID discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.57 |
| alaQoSPortFirPrio1WredDiscardPkts Firenze priority 1 WRED discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.58 |
| alaQoSPortFirPrio1OverflowDiscardPkts Firenze priority 1 overflow discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.59 |
| alaQoSPortTrusted Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed
through the switch. When untrusted, 802.1p/DSCP values are set
to the port de… | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.6 |
| alaQoSPortFirPrio2EnqBytes Firenze priority 2 enqueue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.60 |
| alaQoSPortFirPrio2DeqBytes Firenze priority 2 dequeue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.61 |
| alaQoSPortFirPrio2EnqPkts Firenze priority 2 enqueue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.62 |
| alaQoSPortFirPrio2DeqPkts Firenze priority 2 dequeue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.63 |
| alaQoSPortFirPrio2QidDiscardPkts Firenze priority 2 QID discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.64 |
| alaQoSPortFirPrio2WredDiscardPkts Firenze priority 2 WRED discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.65 |
| alaQoSPortFirPrio2OverflowDiscardPkts Firenze priority 2 overflow discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.66 |
| alaQoSPortFirPrio3EnqBytes Firenze priority 3 enqueue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.67 |
| alaQoSPortFirPrio3DeqBytes Firenze priority 3 dequeue byte count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.68 |
| alaQoSPortFirPrio3EnqPkts Firenze priority 3 enqueue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.69 |
| alaQoSPortDefault8021p 802.1p priority value to use for untagged frames arriving on
the port and tagged frames when the port is untrusted. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.7 |
| alaQoSPortFirPrio3DeqPkts Firenze priority 3 dequeue packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.70 |
| alaQoSPortFirPrio3QidDiscardPkts Firenze priority 3 QID discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.71 |
| alaQoSPortFirPrio3WredDiscardPkts Firenze priority 3 WRED discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.72 |
| alaQoSPortFirPrio3OverflowDiscardPkts Firenze priority 3 overflow discard packet count | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.73 |
| alaQoSPortDefaultClassification Ingress traffic classification parameter for Firenze port
What field to interpret as priority for WRED | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.74 |
| alaQoSPortLowPriorityWeight Weight to use for low priority egress queue on fixed queue blades. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.75 |
| alaQoSPortMediumPriorityWeight Weight to use for medium priority egress queue on fixed queue blades. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.76 |
| alaQoSPortHighPriorityWeight Weight to use for high priority egress queue on fixed queue blades. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.77 |
| alaQoSPortUrgentPriorityWeight Weight to use for urgent priority egress queue on fixed queue blades. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.78 |
| alaQoSPortMaximumBandwidth Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this port | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.79 |
| alaQoSPortDefaultDSCP DSCP value to stamp in frames arriving on the port when the port
is untrusted | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.8 |
| alaQoSPortMaximumBandwidthStatus Status field indicating whether to enforce
maximum bandwidth on port. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.80 |
| alaQoSPortEnqueuingThresholdP0Lower Priority 0 FIFO lower threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.81 |
| alaQoSPortEnqueuingThresholdP0Upper Priority 0 FIFO upper threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.82 |
| alaQoSPortEnqueuingThresholdP1Lower Priority 1 FIFO lower threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.83 |
| alaQoSPortEnqueuingThresholdP1Upper Priority 1 FIFO upper threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.84 |
| alaQoSPortEnqueuingThresholdP2Lower Priority 2 FIFO lower threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.85 |
| alaQoSPortEnqueuingThresholdP2Upper Priority 2 FIFO upper threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.86 |
| alaQoSPortEnqueuingThresholdP3Lower Priority 3 FIFO lower threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.87 |
| alaQoSPortEnqueuingThresholdP3Upper Priority 3 FIFO upper threshold for high density module | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.88 |
| alaQoSPortEnqueuingThresholdStatus Status field indicating whether enqueuing thresholds need
to be enforced on high density module. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.89 |
| alaQoSPortMaximumReservedBandwidth Pending maximum reservable bandwidth on the port.
Policies can reserve up to this much bandwidth.
Does not take effect until an 'Apply' is issued | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.9 |
| alaQoSPortHighDensity Indicates whether this is a high-density port or not. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.90 |
| alaQoSPortServicingMode Servicing mode for the port | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.91 |
| alaQoSPortFreeFFPRules Number of Free FPP rule entries | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.92 |
| alaQoSPortUsedFFPRules Number of Used FPP rule entries | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.93 |
| alaQoSPortFreeFFPMasks Number of Free FPP mask entries | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.94 |
| alaQoSPortUsedFFPMasks Number of Free FPP mask enries | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.95 |
| alaQoSPortSpoofedCount Spoofed packet count | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.96 |
| alaQoSPortNonSpoofedCount Non-spoofed packet count | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.97 |
| alaQoSPortQ4PriorityWeight Weight to use for cos queue 4. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.98 |
| alaQoSPortQ5PriorityWeight Weight to use for cos queue 5. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.99 |