alaQoSActionCounterColor
ALCATEL-IND1-QOS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77
Object
column
r/w
Enumeration
Specifies the color mode for the counters which will be used for sr/trTCM.
Context
- MIB
- ALCATEL-IND1-QOS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alaQoSActionEntry
- Table
- alaQoSActionTable
- Siblings
- 82
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | rednonred |
2 | greennongreen |
3 | greenred |
4 | greenyellow |
5 | redyellow |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaQoSActionName Name of action | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1 |
| alaQoSActionWredMaximumProbabilityStatus Status field indicating whether WRED maximum probability
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10 |
| alaQoSActionMinimumBandwidth Minimum bandwidth (Kbits/sec) to guarantee for traffic | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11 |
| alaQoSActionMinimumBandwidthStatus Status field indicating whether minimum bandwidth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12 |
| alaQoSActionMaximumBandwidth Maximum bandwidth (Kbits/sec) allowed for traffic | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13 |
| alaQoSActionMaximumBandwidthStatus Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14 |
| alaQoSActionPeakBandwidth Peak bandwidth (Kbits/sec) allowed for traffic | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15 |
| alaQoSActionPeakBandwidthStatus Status field indicating whether peak bandwidth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16 |
| alaQoSActionPriority Internal and queueing priority to use for traffic. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17 |
| alaQoSActionPriorityStatus Status field indicating whether priority
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18 |
| alaQoSActionShared When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19 |
| alaQoSActionSource What entity created the action. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2 |
| alaQoSActionJitter Maximum jitter to allow for traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20 |
| alaQoSActionJitterStatus Status field indicating whether jitter
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21 |
| alaQoSActionLatency Maximum latency to allow for traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22 |
| alaQoSActionLatencyStatus Status field indicating whether latency
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23 |
| alaQoSActionMaximumDepth Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24 |
| alaQoSActionMaximumDepthStatus Status field indicating whether maximum depth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25 |
| alaQoSActionMaximumBuffers Maxmimum buffers for queues for traffic. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26 |
| alaQoSActionMaximumBuffersStatus Status field indicating whether maximum buffers
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27 |
| alaQoSAction8021p 802.1p value to stamp on traffic. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28 |
| alaQoSAction8021pStatus Status field indicating whether 802.1p
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29 |
| alaQoSActionDisposition Disposition of traffic using the action.
Use to filter out unwanted traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3 |
| alaQoSActionTos TOS value to stamp on traffic. (High 3 bits of TOS byte) | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30 |
| alaQoSActionTosStatus Status field indicating whether TOS
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31 |
| alaQoSActionDscp TOS value to stamp on traffic. (High 6 bits of TOS byte) | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32 |
| alaQoSActionDscpStatus Status field indicating whether DSCP
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33 |
| alaQoSActionMapFrom What field to use as key for mapping 802.1p/TOS/DSCP priorities | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34 |
| alaQoSActionMapTo What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35 |
| alaQoSActionMapGroup Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36 |
| alaQoSActionMapGroupStatus Status field indicating whether a map group
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37 |
| alaQoSActionSourceRewriteIpAddr Source IP address to rewrite on traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38 |
| alaQoSActionSourceRewriteIpAddrStatus Status field indicating whether source rewrite IP address & mask
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39 |
| alaQoSActionDropAlgorithm Which drop algorithm should be used to discard traffic when
oversubscribed. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4 |
| alaQoSActionSourceRewriteIpMask Source rewrite IP mask to determine how much of
source IP to rewrite. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40 |
| alaQoSActionSourceRewriteNetworkGroup Name of network group containing source address/masks to rewrite
on traffic. Must be a one to on correspondence with
source network group entries in the condition. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41 |
| alaQoSActionSourceRewriteNetworkGroupStatus Status field indicating whether source rewrite network group
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42 |
| alaQoSActionDestinationRewriteIpAddr Destination IP address to rewrite on traffic. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43 |
| alaQoSActionDestinationRewriteIpAddrStatus Status field indicating whether destination rewrite IP address
& mask is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44 |
| alaQoSActionDestinationRewriteIpMask Destination rewrite IP mask to determine how much of
destination IP to rewrite. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45 |
| alaQoSActionDestinationRewriteNetworkGroup Name of network group containing destination address/masks to
rewrite on traffic. Must be a one to on correspondence with
destination network group entries in the condition. | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46 |
| alaQoSActionDestinationRewriteNetworkGroupStatus Status field indicating whether destination rewrite network
group is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47 |
| alaQoSActionLoadBalanceGroup Name of load balance group to use for traffic | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48 |
| alaQoSActionLoadBalanceGroupStatus Status field indicating whether load balanace group
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49 |
| alaQoSActionWredMaximumThreshold Bandwidth at which WRED should discard most traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5 |
| alaQoSActionPermanentGatewayIpAddr Next hop gateway to use for traffic | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50 |
| alaQoSActionPermanentGatewayIpAddrStatus Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51 |
| alaQoSActionAlternateGatewayIpAddr Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52 |
| alaQoSActionAlternateGatewayIpAddrStatus Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53 |
| alaQoSActionRowStatus Used to create/delete actions according to the
RowStatus convention | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54 |
| alaQoSActionMinimumDepth Minimum depth (Kbytes) of queues for traffic.
Used for CBS in tri-color marker applications. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55 |
| alaQoSActionMinimumDepthStatus Status field indicating whether minimum depth
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56 |
| alaQoSActionVPNAccess How to encrypt traffic | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57 |
| alaQoSActionNocache When enabled, don't make hardware entries for matching flows. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58 |
| alaQoSActionPortdisable When enabled, disable the physical source port of the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59 |
| alaQoSActionWredMaximumThresholdStatus Status field indicating whether WRED maximum threshold
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6 |
| alaQoSActionRedirectSlot Destination physical slot for redirected traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60 |
| alaQoSActionRedirectSlotStatus Status for alaQoSActionRedirectSlotStatus field | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61 |
| alaQoSActionRedirectPort Destination physical port for redirected traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62 |
| alaQoSActionRedirectAgg Destination linkagg for redirected traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63 |
| alaQoSActionRedirectAggStatus Status for alaQoSActionRedirectAggStatus field | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64 |
| alaQoSActionMirrorSlot Destination physical slot for mirrored traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65 |
| alaQoSActionMirrorPort Destination physical port for mirrored traffic | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66 |
| alaQoSActionMirrorMode Mirroring mode | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67 |
| alaQoSActionMirrorModeStatus Status for alaQoSActionMirrorMode field | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68 |
| alaQoSActionCIR Committed Information Rate - bandwidth values in kilobits per second. | column | kilobits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69 |
| alaQoSActionWredMinimumThreshold Bandwidth at which WRED should start to discard traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7 |
| alaQoSActionCIRStatus Status field indicating whether CIR value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70 |
| alaQoSActionCBS Committed Burst Size - bucket size in byte. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71 |
| alaQoSActionCBSStatus Status field indicating whether CBS value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72 |
| alaQoSActionPIR Peak Information Rate - bandwidth values in kilobits per second. | column | kilobits per second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73 |
| alaQoSActionPIRStatus Status field indicating whether PIR value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74 |
| alaQoSActionPBS Peak Burst Size - bucket size in byte. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75 |
| alaQoSActionPBSStatus Status field indicating whether PBS value is specified(enabled)
or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76 |
| alaQoSActionRTCPMonitor RTCP Monitor status for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.78 |
| alaQoSActionRTCPMonitorStatus Status of the RTCP Monitor field for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.79 |
| alaQoSActionWredMinimumThresholdStatus Status field indicating whether WRED minimum threshold
is specified(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8 |
| alaQoSActionRTCPDSCP RTCP DSCP number for the traffic. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.80 |
| alaQoSActionRTCPDSCPStatus Status of the RTCP DSCP field for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.81 |
| alaQoSActionTrustDSCP Trust DSCP status for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.82 |
| alaQoSActionTrustDSCPStatus Status of the Trust DSCP field for the traffic. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.83 |
| alaQoSActionWredMaximumProbability Probabilty that traffic will be dropped at WRED
maximum threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9 |