alaQoSConditionSourceUdpPortEnd
ALCATEL-IND1-QOS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83
Object
column
r/w
Integer32
Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP port as a single UDP port.
Context
- MIB
- ALCATEL-IND1-QOS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- alaQoSConditionEntry
- Table
- alaQoSConditionTable
- Siblings
- 123
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaQoSConditionName Name of condition | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.1 |
| alaQoSConditionDestinationPort Destination physical port range start to use for traffic
classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.10 |
| alaQoSConditionDestinationIpv6AddrStatus Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.100 |
| alaQoSConditionDestinationIpv6Mask Destination IPv6 mask to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.101 |
| alaQoSConditionIpv6Traffic classify IPV6 traffic | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.102 |
| alaQoSConditionIpv6NH NH value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.103 |
| alaQoSConditionIpv6NHStatus Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.104 |
| alaQoSConditionIpv6FlowLabel FL value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.105 |
| alaQoSConditionIpv6FlowLabelStatus Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.106 |
| alaQoSConditionMcastIpv6Addr Multicast IPv6 address to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.107 |
| alaQoSConditionMcastIpv6AddrStatus Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.108 |
| alaQoSConditionMcastIpv6Mask Multicast IPv6 mask to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.109 |
| alaQoSConditionDestinationPortGroup Destination physical port group to use for traffic
classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.11 |
| alaQoSConditionDscpEnd DSCP value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.110 |
| alaQoSConditionInnerSourceVlan Customer VLAN to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.111 |
| alaQoSConditionInnerSourceVlanStatus Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.112 |
| alaQoSConditionInner8021p Customer 802.1p to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.113 |
| alaQoSConditionInner8021pStatus Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.114 |
| alaQoSConditionVrfName Name of Vrf to match traffic in | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.115 |
| alaQoSConditionVrfNameStatus Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.116 |
| alaQoSCondition8021pEnd 802.1p range end value to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.117 |
| alaQoSConditionInner8021pEnd Inner 802.1p range end value to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.118 |
| alaQoSConditionSourceVlanGroup Source vlan group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.119 |
| alaQoSConditionDestinationPortGroupStatus Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.12 |
| alaQoSConditionSourceVlanGroupStatus Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for source
vlan group. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.120 |
| alaQoSConditionInnerSourceVlanGroup Inner Source vlan group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.121 |
| alaQoSConditionInnerSourceVlanGroupStatus Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner
source vlan group. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.122 |
| alaQoSConditionSIP SIP type to use for traffic classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.123 |
| alaQoSConditionSIPStatus SIP Status field indicates whether SIP is enabled or disabled
for traffic classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.124 |
| alaQoSConditionSourceInterfaceType Source physical interface type to use for traffic
classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.13 |
| alaQoSConditionSourceInterfaceTypeStatus Status field indicating whether the source physical
interface type needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.14 |
| alaQoSConditionDestinationInterfaceType Destination physical interface type to use for traffic
classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.15 |
| alaQoSConditionDestinationInterfaceTypeStatus Status field indicating whether the destination physical
interface type needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.16 |
| alaQoSConditionSourceMacAddr Source MAC address to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.17 |
| alaQoSConditionSourceMacAddrStatus Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.18 |
| alaQoSConditionSourceMacMask Source MAC mask to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.19 |
| alaQoSConditionSource What entity created the condition. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.2 |
| alaQoSConditionSourceMacGroup Source MAC group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.20 |
| alaQoSConditionSourceMacGroupStatus Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.21 |
| alaQoSConditionDestinationMacAddr Destination MAC address to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.22 |
| alaQoSConditionDestinationMacAddrStatus Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.23 |
| alaQoSConditionDestinationMacMask Destination MAC mask to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.24 |
| alaQoSConditionDestinationMacGroup Destination MAC group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.25 |
| alaQoSConditionDestinationMacGroupStatus Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.26 |
| alaQoSConditionSourceVlan Source VLAN to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.27 |
| alaQoSConditionSourceVlanStatus Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.28 |
| alaQoSConditionDestinationVlan Destination VLAN to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.29 |
| alaQoSConditionSourceSlot Source physical slot used for traffic classification
When 0, the port identifies an aggregate | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.3 |
| alaQoSConditionDestinationVlanStatus Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.30 |
| alaQoSCondition8021p 802.1p value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.31 |
| alaQoSCondition8021pStatus Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.32 |
| alaQoSConditionSourceIpAddr Source IP address to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.33 |
| alaQoSConditionSourceIpAddrStatus Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.34 |
| alaQoSConditionSourceIpMask Source IP mask to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.35 |
| alaQoSConditionSourceNetworkGroup Source network group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.36 |
| alaQoSConditionSourceNetworkGroupStatus Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.37 |
| alaQoSConditionDestinationIpAddr Destination IP address to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.38 |
| alaQoSConditionDestinationIpAddrStatus Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.39 |
| alaQoSConditionSourceSlotStatus Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.4 |
| alaQoSConditionDestinationIpMask Destination IP mask to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.40 |
| alaQoSConditionDestinationNetworkGroup Destination network group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.41 |
| alaQoSConditionDestinationNetworkGroupStatus Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.42 |
| alaQoSConditionMulticastIpAddr Multicast IP address to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.43 |
| alaQoSConditionMulticastIpAddrStatus Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.44 |
| alaQoSConditionMulticastIpMask Multicast IP mask to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.45 |
| alaQoSConditionMulticastNetworkGroup Multicast network group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.46 |
| alaQoSConditionMulticastNetworkGroupStatus Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.47 |
| alaQoSConditionTos TOS value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.48 |
| alaQoSConditionTosStatus Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.49 |
| alaQoSConditionSourcePort Source physical port range start to use for
traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.5 |
| alaQoSConditionTosMask TOS mask to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.50 |
| alaQoSConditionDscp DSCP value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.51 |
| alaQoSConditionDscpStatus Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.52 |
| alaQoSConditionDscpMask DSCP mask to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.53 |
| alaQoSConditionIpProtocol IP protocol to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.54 |
| alaQoSConditionIpProtocolStatus Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.55 |
| alaQoSConditionSourceIpPort Source IP port range start to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.56 |
| alaQoSConditionSourceIpPortStatus Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.57 |
| alaQoSConditionDestinationIpPort Destination IP port range start to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.58 |
| alaQoSConditionDestinationIpPortStatus Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.59 |
| alaQoSConditionSourcePortGroup Source physical port group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.6 |
| alaQoSConditionService Name of service to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.60 |
| alaQoSConditionServiceStatus Status field indicating whether the service
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.61 |
| alaQoSConditionServiceGroup Name of service group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.62 |
| alaQoSConditionServiceGroupStatus Status field indicating whether the service group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.63 |
| alaQoSConditionIcmpType ICMP type to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.64 |
| alaQoSConditionIcmpTypeStatus Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.65 |
| alaQoSConditionIcmpCode ICMP code to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.66 |
| alaQoSConditionIcmpCodeStatus Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.67 |
| alaQoSConditionDlci DLCI to use to traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.68 |
| alaQoSConditionDlciStatus Status field indicating whether the DLCI
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.69 |
| alaQoSConditionSourcePortGroupStatus Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.7 |
| alaQoSConditionRowStatus Used to create/delete conditions according to the
RowStatus convention | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.70 |
| alaQoSConditionSourcePortEnd Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.71 |
| alaQoSConditionDestinationPortEnd Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.72 |
| alaQoSConditionSourceIpPortEnd Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.73 |
| alaQoSConditionDestinationIpPortEnd Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a … | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.74 |
| alaQoSConditionSourceTcpPort Source TCP port range start to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.75 |
| alaQoSConditionSourceTcpPortStatus Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.76 |
| alaQoSConditionSourceTcpPortEnd Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP p… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.77 |
| alaQoSConditionDestinationTcpPort Destination TCP port range start to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.78 |
| alaQoSConditionDestinationTcpPortStatus Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.79 |
| alaQoSConditionDestinationSlot Destination physical slot used for traffic classification
When 0, the port identifies an aggregate | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.8 |
| alaQoSConditionDestinationTcpPortEnd Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
a… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.80 |
| alaQoSConditionSourceUdpPort Source UDP port range start to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.81 |
| alaQoSConditionSourceUdpPortStatus Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.82 |
| alaQoSConditionDestinationUdpPort Destination UDP port range start to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.84 |
| alaQoSConditionDestinationUdpPortStatus Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.85 |
| alaQoSConditionDestinationUdpPortEnd Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
a… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.86 |
| alaQoSConditionEthertype Ethertype value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.87 |
| alaQoSConditionEthertypeStatus Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.88 |
| alaQoSConditionTcpFlags Use any/all specifieid TCP flags for traffic classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.89 |
| alaQoSConditionDestinationSlotStatus Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.9 |
| alaQoSConditionTcpFlagsStatus Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.90 |
| alaQoSConditionTcpFlagsVal TCP flags values used for traffic classification | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.91 |
| alaQoSConditionTcpFlagsValStatus Not used | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.92 |
| alaQoSConditionTcpFlagsMask Mask of TCP flags bits used for traffic classification | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.93 |
| alaQoSConditionTcpFlagsMaskStatus Not used | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.94 |
| alaQoSConditionTcpEstablished Look for established TCP sessions in classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.95 |
| alaQoSConditionSourceIpv6Addr Source IPv6 address to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.96 |
| alaQoSConditionSourceIpv6AddrStatus Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.97 |
| alaQoSConditionSourceIpv6Mask Source IPv6 mask to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.98 |
| alaQoSConditionDestinationIpv6Addr Destination IPv6 address to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.99 |