alaQoSActionMirrorPort

ALCATEL-IND1-QOS-MIB · .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66
MIB view Table view

Object

column r/w Integer32 
Destination physical port for mirrored traffic

Context

MIB
ALCATEL-IND1-QOS-MIB
OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66
Type
column
Access
readwrite
Status
current
Parent
alaQoSActionEntry
Table
alaQoSActionTable
Siblings
82

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-52

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alaQoSActionName
Name of action
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1
alaQoSActionWredMaximumProbabilityStatus
Status field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10
alaQoSActionMinimumBandwidth
Minimum bandwidth (Kbits/sec) to guarantee for traffic
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11
alaQoSActionMinimumBandwidthStatus
Status field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12
alaQoSActionMaximumBandwidth
Maximum bandwidth (Kbits/sec) allowed for traffic
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13
alaQoSActionMaximumBandwidthStatus
Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14
alaQoSActionPeakBandwidth
Peak bandwidth (Kbits/sec) allowed for traffic
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15
alaQoSActionPeakBandwidthStatus
Status field indicating whether peak bandwidth is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16
alaQoSActionPriority
Internal and queueing priority to use for traffic.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17
alaQoSActionPriorityStatus
Status field indicating whether priority is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18
alaQoSActionShared
When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19
alaQoSActionSource
What entity created the action.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2
alaQoSActionJitter
Maximum jitter to allow for traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20
alaQoSActionJitterStatus
Status field indicating whether jitter is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21
alaQoSActionLatency
Maximum latency to allow for traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22
alaQoSActionLatencyStatus
Status field indicating whether latency is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23
alaQoSActionMaximumDepth
Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24
alaQoSActionMaximumDepthStatus
Status field indicating whether maximum depth is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25
alaQoSActionMaximumBuffers
Maxmimum buffers for queues for traffic.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26
alaQoSActionMaximumBuffersStatus
Status field indicating whether maximum buffers is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27
alaQoSAction8021p
802.1p value to stamp on traffic.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28
alaQoSAction8021pStatus
Status field indicating whether 802.1p is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29
alaQoSActionDisposition
Disposition of traffic using the action. Use to filter out unwanted traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3
alaQoSActionTos
TOS value to stamp on traffic. (High 3 bits of TOS byte)
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30
alaQoSActionTosStatus
Status field indicating whether TOS is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31
alaQoSActionDscp
TOS value to stamp on traffic. (High 6 bits of TOS byte)
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32
alaQoSActionDscpStatus
Status field indicating whether DSCP is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33
alaQoSActionMapFrom
What field to use as key for mapping 802.1p/TOS/DSCP priorities
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34
alaQoSActionMapTo
What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35
alaQoSActionMapGroup
Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36
alaQoSActionMapGroupStatus
Status field indicating whether a map group is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37
alaQoSActionSourceRewriteIpAddr
Source IP address to rewrite on traffic.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38
alaQoSActionSourceRewriteIpAddrStatus
Status field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39
alaQoSActionDropAlgorithm
Which drop algorithm should be used to discard traffic when oversubscribed.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4
alaQoSActionSourceRewriteIpMask
Source rewrite IP mask to determine how much of source IP to rewrite.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40
alaQoSActionSourceRewriteNetworkGroup
Name of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condition.
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41
alaQoSActionSourceRewriteNetworkGroupStatus
Status field indicating whether source rewrite network group is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42
alaQoSActionDestinationRewriteIpAddr
Destination IP address to rewrite on traffic.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43
alaQoSActionDestinationRewriteIpAddrStatus
Status field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44
alaQoSActionDestinationRewriteIpMask
Destination rewrite IP mask to determine how much of destination IP to rewrite.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45
alaQoSActionDestinationRewriteNetworkGroup
Name of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in the condition.
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46
alaQoSActionDestinationRewriteNetworkGroupStatus
Status field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47
alaQoSActionLoadBalanceGroup
Name of load balance group to use for traffic
columnOctetString.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48
alaQoSActionLoadBalanceGroupStatus
Status field indicating whether load balanace group is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49
alaQoSActionWredMaximumThreshold
Bandwidth at which WRED should discard most traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5
alaQoSActionPermanentGatewayIpAddr
Next hop gateway to use for traffic
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50
alaQoSActionPermanentGatewayIpAddrStatus
Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51
alaQoSActionAlternateGatewayIpAddr
Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52
alaQoSActionAlternateGatewayIpAddrStatus
Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53
alaQoSActionRowStatus
Used to create/delete actions according to the RowStatus convention
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54
alaQoSActionMinimumDepth
Minimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55
alaQoSActionMinimumDepthStatus
Status field indicating whether minimum depth is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56
alaQoSActionVPNAccess
How to encrypt traffic
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57
alaQoSActionNocache
When enabled, don't make hardware entries for matching flows.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58
alaQoSActionPortdisable
When enabled, disable the physical source port of the traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59
alaQoSActionWredMaximumThresholdStatus
Status field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6
alaQoSActionRedirectSlot
Destination physical slot for redirected traffic
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60
alaQoSActionRedirectSlotStatus
Status for alaQoSActionRedirectSlotStatus field
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61
alaQoSActionRedirectPort
Destination physical port for redirected traffic
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62
alaQoSActionRedirectAgg
Destination linkagg for redirected traffic
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63
alaQoSActionRedirectAggStatus
Status for alaQoSActionRedirectAggStatus field
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64
alaQoSActionMirrorSlot
Destination physical slot for mirrored traffic
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65
alaQoSActionMirrorMode
Mirroring mode
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67
alaQoSActionMirrorModeStatus
Status for alaQoSActionMirrorMode field
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68
alaQoSActionCIR
Committed Information Rate - bandwidth values in kilobits per second.
columnkilobits per second SNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69
alaQoSActionWredMinimumThreshold
Bandwidth at which WRED should start to discard traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7
alaQoSActionCIRStatus
Status field indicating whether CIR value is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70
alaQoSActionCBS
Committed Burst Size - bucket size in byte.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71
alaQoSActionCBSStatus
Status field indicating whether CBS value is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72
alaQoSActionPIR
Peak Information Rate - bandwidth values in kilobits per second.
columnkilobits per second SNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73
alaQoSActionPIRStatus
Status field indicating whether PIR value is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74
alaQoSActionPBS
Peak Burst Size - bucket size in byte.
columnInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75
alaQoSActionPBSStatus
Status field indicating whether PBS value is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76
alaQoSActionCounterColor
Specifies the color mode for the counters which will be used for sr/trTCM.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77
alaQoSActionRTCPMonitor
RTCP Monitor status for the traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.78
alaQoSActionRTCPMonitorStatus
Status of the RTCP Monitor field for the traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.79
alaQoSActionWredMinimumThresholdStatus
Status field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8
alaQoSActionRTCPDSCP
RTCP DSCP number for the traffic.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.80
alaQoSActionRTCPDSCPStatus
Status of the RTCP DSCP field for the traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.81
alaQoSActionTrustDSCP
Trust DSCP status for the traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.82
alaQoSActionTrustDSCPStatus
Status of the Trust DSCP field for the traffic.
columnEnumeration.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.83
alaQoSActionWredMaximumProbability
Probabilty that traffic will be dropped at WRED maximum threshold.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9