alaQoSAppliedConditionSourceIpPortEnd
ALCATEL-IND1-QOS-MIB ·
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73
Object
column
Integer32
Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port as a single IP port.
Context
- MIB
- ALCATEL-IND1-QOS-MIB
- OID
.1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73- Type
- column
- Access
- readonly
- Status
- current
- Parent
- alaQoSAppliedConditionEntry
- Table
- alaQoSAppliedConditionTable
- Siblings
- 123
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| alaQoSAppliedConditionName Name of condition | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.1 |
| alaQoSAppliedConditionDestinationPort Destination physical port range start to use for traffic
classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.10 |
| alaQoSAppliedConditionDestinationIpv6AddrStatus Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100 |
| alaQoSAppliedConditionDestinationIpv6Mask Destination IPv6 mask to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101 |
| alaQoSAppliedConditionIpv6Traffic classify IPV6 traffic | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102 |
| alaQoSAppliedConditionIpv6NH NH value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103 |
| alaQoSAppliedConditionIpv6NHStatus Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104 |
| alaQoSAppliedConditionIpv6FlowLabel FL value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105 |
| alaQoSAppliedConditionIpv6FlowLabelStatus Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106 |
| alaQoSAppliedConditionMcastIpv6Addr Multicast IPv6 address to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107 |
| alaQoSAppliedConditionMcastIpv6AddrStatus Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.108 |
| alaQoSAppliedConditionMcastIpv6Mask Multicast IPv6 mask to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109 |
| alaQoSAppliedConditionDestinationPortGroup Destination physical port group to use for traffic
classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.11 |
| alaQoSAppliedConditionDscpEnd DSCP value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110 |
| alaQoSAppliedConditionInnerSourceVlan Customer VLAN to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111 |
| alaQoSAppliedConditionInnerSourceVlanStatus Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112 |
| alaQoSAppliedConditionInner8021p Customer 802.1p to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113 |
| alaQoSAppliedConditionInner8021pStatus Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114 |
| alaQoSAppliedConditionVrfName Name of Vrf to match traffic in | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115 |
| alaQoSAppliedConditionVrfNameStatus Status field indicating whether the traffic from a specific vrf needs
to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116 |
| alaQoSAppliedCondition8021pEnd 802.1p range end value to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117 |
| alaQoSAppliedConditionInner8021pEnd Inner 802.1p range end value to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118 |
| alaQoSAppliedConditionSourceVlanGroup Source vlan group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119 |
| alaQoSAppliedConditionDestinationPortGroupStatus Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.12 |
| alaQoSAppliedConditionSourceVlanGroupStatus Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for source
vlan group. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120 |
| alaQoSAppliedConditionInnerSourceVlanGroup Inner Source vlan group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121 |
| alaQoSAppliedConditionInnerSourceVlanGroupStatus Status field indicating whether to use for traffic
classification (enabled) or not (disabled) for inner
source vlan group. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122 |
| alaQoSAppliedConditionSIP SIP type to use for traffic classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.123 |
| alaQoSAppliedConditionSIPStatus SIP Status field indicates whether SIP is enabled or disabled
for traffic classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.124 |
| alaQoSAppliedConditionSourceInterfaceType Source physical interface type to use for traffic
classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.13 |
| alaQoSAppliedConditionSourceInterfaceTypeStatus Status field indicating whether the source physical
interface type needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.14 |
| alaQoSAppliedConditionDestinationInterfaceType Destination physical interface type to use for traffic
classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.15 |
| alaQoSAppliedConditionDestinationInterfaceTypeStatus Status field indicating whether the destination physical
interface type needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.16 |
| alaQoSAppliedConditionSourceMacAddr Source MAC address to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.17 |
| alaQoSAppliedConditionSourceMacAddrStatus Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.18 |
| alaQoSAppliedConditionSourceMacMask Source MAC mask to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.19 |
| alaQoSAppliedConditionSource What entity created the condition. | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.2 |
| alaQoSAppliedConditionSourceMacGroup Source MAC group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.20 |
| alaQoSAppliedConditionSourceMacGroupStatus Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.21 |
| alaQoSAppliedConditionDestinationMacAddr Destination MAC address to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.22 |
| alaQoSAppliedConditionDestinationMacAddrStatus Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.23 |
| alaQoSAppliedConditionDestinationMacMask Destination MAC mask to use for traffic classification | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.24 |
| alaQoSAppliedConditionDestinationMacGroup Destination MAC group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.25 |
| alaQoSAppliedConditionDestinationMacGroupStatus Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.26 |
| alaQoSAppliedConditionSourceVlan Source VLAN to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.27 |
| alaQoSAppliedConditionSourceVlanStatus Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.28 |
| alaQoSAppliedConditionDestinationVlan Destination VLAN to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.29 |
| alaQoSAppliedConditionSourceSlot Source physical slot used for traffic classification
When 0, the port identifies an aggregate | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.3 |
| alaQoSAppliedConditionDestinationVlanStatus Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.30 |
| alaQoSAppliedCondition8021p 802.1p value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.31 |
| alaQoSAppliedCondition8021pStatus Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.32 |
| alaQoSAppliedConditionSourceIpAddr Source IP address to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.33 |
| alaQoSAppliedConditionSourceIpAddrStatus Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.34 |
| alaQoSAppliedConditionSourceIpMask Source IP mask to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.35 |
| alaQoSAppliedConditionSourceNetworkGroup Source network group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.36 |
| alaQoSAppliedConditionSourceNetworkGroupStatus Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.37 |
| alaQoSAppliedConditionDestinationIpAddr Destination IP address to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.38 |
| alaQoSAppliedConditionDestinationIpAddrStatus Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.39 |
| alaQoSAppliedConditionSourceSlotStatus Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.4 |
| alaQoSAppliedConditionDestinationIpMask Destination IP mask to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.40 |
| alaQoSAppliedConditionDestinationNetworkGroup Destination network group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.41 |
| alaQoSAppliedConditionDestinationNetworkGroupStatus Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.42 |
| alaQoSAppliedConditionMulticastIpAddr Multicast IP address to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.43 |
| alaQoSAppliedConditionMulticastIpAddrStatus Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.44 |
| alaQoSAppliedConditionMulticastIpMask Multicast IP mask to use for traffic classification | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.45 |
| alaQoSAppliedConditionMulticastNetworkGroup Multicast network group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.46 |
| alaQoSAppliedConditionMulticastNetworkGroupStatus Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.47 |
| alaQoSAppliedConditionTos TOS value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.48 |
| alaQoSAppliedConditionTosStatus Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.49 |
| alaQoSAppliedConditionSourcePort Source physical port range start to use for
traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.5 |
| alaQoSAppliedConditionTosMask TOS mask to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.50 |
| alaQoSAppliedConditionDscp DSCP value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.51 |
| alaQoSAppliedConditionDscpStatus Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.52 |
| alaQoSAppliedConditionDscpMask DSCP mask to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.53 |
| alaQoSAppliedConditionIpProtocol IP protocol to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.54 |
| alaQoSAppliedConditionIpProtocolStatus Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.55 |
| alaQoSAppliedConditionSourceIpPort Source IP port range start to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.56 |
| alaQoSAppliedConditionSourceIpPortStatus Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.57 |
| alaQoSAppliedConditionDestinationIpPort Destination IP port range start to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58 |
| alaQoSAppliedConditionDestinationIpPortStatus Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59 |
| alaQoSAppliedConditionSourcePortGroup Source physical port group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.6 |
| alaQoSAppliedConditionService Name of service to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60 |
| alaQoSAppliedConditionServiceStatus Status field indicating whether the service
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61 |
| alaQoSAppliedConditionServiceGroup Name of service group to use for traffic classification | column | OctetString | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62 |
| alaQoSAppliedConditionServiceGroupStatus Status field indicating whether the service group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63 |
| alaQoSAppliedConditionIcmpType ICMP type to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64 |
| alaQoSAppliedConditionIcmpTypeStatus Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65 |
| alaQoSAppliedConditionIcmpCode ICMP code to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66 |
| alaQoSAppliedConditionIcmpCodeStatus Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67 |
| alaQoSAppliedConditionDlci DLCI to use to traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68 |
| alaQoSAppliedConditionDlciStatus Status field indicating whether the DLCI
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69 |
| alaQoSAppliedConditionSourcePortGroupStatus Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.7 |
| alaQoSAppliedConditionRowStatus Used to create/delete conditions according to the
RowStatus convention | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70 |
| alaQoSAppliedConditionSourcePortEnd Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71 |
| alaQoSAppliedConditionDestinationPortEnd Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72 |
| alaQoSAppliedConditionDestinationIpPortEnd Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a … | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74 |
| alaQoSAppliedConditionSourceTcpPort Source TCP port range start to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75 |
| alaQoSAppliedConditionSourceTcpPortStatus Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76 |
| alaQoSAppliedConditionSourceTcpPortEnd Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP p… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77 |
| alaQoSAppliedConditionDestinationTcpPort Destination TCP port range start to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78 |
| alaQoSAppliedConditionDestinationTcpPortStatus Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79 |
| alaQoSAppliedConditionDestinationSlot Destination physical slot used for traffic classification
When 0, the port identifies an aggregate | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.8 |
| alaQoSAppliedConditionDestinationTcpPortEnd Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
a… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80 |
| alaQoSAppliedConditionSourceUdpPort Source UDP port range start to use for traffic classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81 |
| alaQoSAppliedConditionSourceUdpPortStatus Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82 |
| alaQoSAppliedConditionSourceUdpPortEnd Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP p… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83 |
| alaQoSAppliedConditionDestinationUdpPort Destination UDP port range start to use for traffic
classification. | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84 |
| alaQoSAppliedConditionDestinationUdpPortStatus Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85 |
| alaQoSAppliedConditionDestinationUdpPortEnd Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
a… | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86 |
| alaQoSAppliedConditionEthertype Ethertype value to use for traffic classification | column | Integer32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87 |
| alaQoSAppliedConditionEthertypeStatus Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88 |
| alaQoSAppliedConditionTcpFlags Use any/all specifieid TCP flags for traffic classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89 |
| alaQoSAppliedConditionDestinationSlotStatus Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.9 |
| alaQoSAppliedConditionTcpFlagsStatus Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90 |
| alaQoSAppliedConditionTcpFlagsVal TCP flags values used for traffic classification | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91 |
| alaQoSAppliedConditionTcpFlagsValStatus Not used | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92 |
| alaQoSAppliedConditionTcpFlagsMask Mask of TCP flags bits used for traffic classification | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93 |
| alaQoSAppliedConditionTcpFlagsMaskStatus Not used | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94 |
| alaQoSAppliedConditionTcpEstablished Look for established TCP sessions in classification | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95 |
| alaQoSAppliedConditionSourceIpv6Addr Source IPv6 address to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96 |
| alaQoSAppliedConditionSourceIpv6AddrStatus Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled). | column | Enumeration | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97 |
| alaQoSAppliedConditionSourceIpv6Mask Source IPv6 mask to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98 |
| alaQoSAppliedConditionDestinationIpv6Addr Destination IPv6 address to use for traffic classification | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99 |