ACE202-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

732

prtSonetMediumTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.1 · 1 row entry · 2 columns

Open in standard view

The SONET Medium table.

prtSonetMediumEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.1.1

An entry in the SONET Medium table. ifIndex of the
lowest SONET layer of type sonet(39).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetMediumTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32	`.1.3.6.1.4.1.164.3.1.6.2.1.1.1.1`
prtSonetMediumValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32 Constraints: `range: 1-255`	`.1.3.6.1.4.1.164.3.1.6.2.1.1.1.2`

prtSonetSectionLineCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.2 · 1 row entry · 12 columns

Open in standard view

The SONET Section/Line Current table.

prtSectionLineCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.2.1

An entry in the SONET Section/Line Current table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

No indexes recorded

Column Syntax OID

prtSonetCurrentLOS

The counter associated with the number of LOS
seconds, encountered by a SONET interface in
the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.1

prtSonetCurrentLOF

The counter associated with the number of LOF
seconds, encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.2

prtSonetCurrentLineAIS

The counter associated with the number of Line AIS
seconds, encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.3

prtSonetCurrentLineFERF

The counter associated with the number of Line
FERF seconds, encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.4

prtSonetCurrentSectionBIP

The counter associated with the number of Section
BIP errors, encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.5

prtSonetCurrentLineBIP

The counter associated with the number of Line
BIP errors, encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	rx
3	tx
4	both

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.6

prtSonetCurrentLineFEBE

The counter associated with the number of Line
FEBE errors, encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	tu2
3	tu3
4	tu11
5	tu12

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.7

prtSonetCurrentUAS

The counter associated with the number of UAS
encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.8

prtSonetCurrentSES

The counter associated with the number of SES
encountered by a SONET
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.9

prtSonetCurrentES

The number of Errored Seconds, encountered by a
SONET interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 0-899

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.10

prtSonetCurrentStatus

The statuses of the current interval:
0 - O.K.
1 - The link has been switched by a redundancy mechanism.
2 - Module is in/out.
4 - Empty - card is out.

OctetString

Constraints:
range: 0-96

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.11

prtSonetCurrentLSV

The counter associated with the number of LSV
seconds (Line Symbol Violation), encountered by a
SONET interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.2.1.2.1.12

prtSonetSectionLineIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.3 · 1 row entry · 13 columns

Open in standard view

The Section/Line Interval table.

prtSectionLineIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.3.1

An entry in the SONET Section/Line Interval table.
ifIndex of the section/line SONET layer of type
sonet(39).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetLineIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.1`
prtSonetIntervalLOS The counter associated with the number of LOS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.2`
prtSonetIntervalLOF The counter associated with the number of LOF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.3`
prtSonetIntervalLineAIS The counter associated with the number of Line AIS seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.4`
prtSonetIntervalLineFERF The counter associated with the number of Line FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.5`
prtSonetIntervalSectionBIP The counter associated with the number of Section BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.6`
prtSonetIntervalLineBIP The counter associated with the number of Line BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.7`
prtSonetIntervalLineFEBE The counter associated with the number of Line FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.8`
prtSonetIntervalUAS The counter associated with the number of UAS encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.9`
prtSonetIntervalSES The counter associated with the number of SES encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.10`
prtSonetIntervalES The number of Errored Seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.11`
prtSonetIntervalStatus The statuses of the current interval: 0 - O.K. 1 - The link has been switched by a redundancy mechanism. 2 - Module is in/out. 4 - Empty - card is out.	OctetString	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.12`
prtSonetIntervalLSV The counter associated with the number of LSV seconds (Line Symbol Violation), encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.3.1.13`

prtSonetPathCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.4 · 1 row entry · 7 columns

Open in standard view

The SONET Path Current table.

prtPathCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.4.1

An entry in the SONET Path Current table.
ifIndex of the Path SONET layer of type
sonetPath(50).

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetCurrentPathAIS The counter associated with the number of Path AIS seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.1`
prtSonetCurrentPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.2`
prtSonetCurrentLOP The counter associated with the number LOP seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 4-4` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.3`
prtSonetCurrentSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.4`
prtSonetCurrentLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.5`
prtSonetCurrentPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-96` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.6`
prtSonetCurrentPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.4.1.7`

prtSonetPathIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.2.1.5 · 1 row entry · 8 columns

Open in standard view

The Path Interval table.

prtPathIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.2.1.5.1

An entry in the SONET Path Interval table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetPathIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.1`
prtSonetIntervalPathAIS The counter associated with the number of Path AIS seconds , encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.2`
prtSonetIntervalPathFERF The counter associated with the number of Path FERF seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.3`
prtSonetIntervalLOP The counter associated with the number of LOP seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.4`
prtSonetIntervalSLM The counter associated with the number of SLM seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.5`
prtSonetIntervalLOC The counter associated with the number of LOC seconds, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.6`
prtSonetIntervalPathBIP The counter associated with the number of Path BIP errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.7`
prtSonetIntervalPathFEBE The counter associated with the number of Path FEBE errors, encountered by a SONET interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.3.1.6.2.1.5.1.8`

prtSonetGenTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.1.1 · 1 row entry · 4 columns

Open in standard view

Sonet/SDH general port configuration table.

prtSonetGenEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.1.1.1

An entry in the Sonet/SDH general port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetGenCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	`.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.1`
prtSonetGenIdx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.2`
prtSonetGenSdThreshold SD=Signal Degraded Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 .	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.3`
prtSonetGenEedThreshold EED=Excessive Error Defect Threshold. Units: [10E-]. The threshold is 10E-x relative to the frequency of the data flow. x=3, 4, 5, 6, 7, 8, 9. n3= 10E-3 n4= 10E-4 n5= 10E-5 n6= 10E-6 n7= 10E-7 n8= 10E-8 n9= 10E-9 .	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.1.1.1.4`

prtSonetStm1Table

table

.1.3.6.1.4.1.164.3.1.6.2.2.2.1 · 1 row entry · 6 columns

Open in standard view

Sonet/SDH STM-1 port configuration table.

prtSonetStm1Entry entry .1.3.6.1.4.1.164.3.1.6.2.2.2.1.1

An entry in the Sonet/SDH STM-1 port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetStm1CnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.1`
prtSonetStm1Idx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.2`
prtSonetStm1ClockSrc Clock Source of the STM-1 port. lbt = Loop Back Timing.	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.3`
prtSonetStm1DccMode DCC Mode. DCC=Data Communication Channel. d1ToD3 = D1-D3 bytes are used (RS=Regeneration Section). d4ToD12= D4-D12 bytes are used (MS=Multiplexing Section).	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.4`
prtSonetStm1RoutingProt Routing Protocol.	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.5`
prtSonetStm1MngProt Management Protocol over DCC: Proprietary, PPP or Frame Relay.	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.2.1.1.6`

prtSonetVcTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.3.1 · 1 row entry · 6 columns

Open in standard view

Sonet/SDH VC port configuration table.

prtSonetVcEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.3.1.1

An entry in the Sonet/SDH VC port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
prtSonetVcCnfgIdx This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurations, Set can be performed only to the Temporary Config (=255…	Integer32	`.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.1`
prtSonetVcIdx This object indicates a unique port or interface number. For numbering, see product's spec. For some products, the numbering can equal ifIndex.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.2`
prtSonetVcJTxPathTraceEnable Enable/Disable Transmitting Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.3`
prtSonetVcJRxPathTraceEnable Enable/Disable checking Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer.	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.4`
prtSonetVcJPathTrace Jy Path Trace. y=1, 2: J1 - for VC-4 layer J2 - for VC-12 layer. This object is applicable only if one of the previous 2 objects is 'enable'.	OctetStringr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.5`
prtSonetVcConnect Connect VCn (n - 11,12,2,3,4) port (yes/no).	Enumerationr/w	`.1.3.6.1.4.1.164.3.1.6.2.2.3.1.1.6`

prtSonetTuTable

table

.1.3.6.1.4.1.164.3.1.6.2.2.3.2 · 1 row entry · 7 columns

Open in standard view

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetTuEntry entry .1.3.6.1.4.1.164.3.1.6.2.2.3.2.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

prtSonetTuCnfgIdx

This object indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For products that support several configurations, Set can be performed
only to the Temporary Config (=255…

Integer32

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.1

prtSonetTuPrtIdx

This object indicates a unique port or interface number.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.2

prtSonetTuIdx

This object indicates a unique TU (Tributary Unit) within VC-4.
The valid TUs are 1..63.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.3

prtSonetTuConPrtIdx

This object indicates the connected port, when prtSonetTuType=connect.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.
notApplicable - will be indicated as 100.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.4

prtSonetTuType

The type of TU (Tributary Unit).
connect - connected to one of the E1 ports.
TUs that are not connected will not exist in this table.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.5

prtSonetTuMode

TU Mode of connection.
addAndDrop - Add & Drop
add - Add (TU receives from the E1 ports).

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.6

prtSonetTuRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.3.1.6.2.2.3.2.1.7

prtSonetXConnectTable

table

.1.3.6.1.4.1.164.3.1.6.2.3.1 · 1 row entry · 10 columns

Open in standard view

The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).

prtSonetXConnectEntry entry .1.3.6.1.4.1.164.3.1.6.2.3.1.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

prtSonetXConnectCnfgIdx

Integer32

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.1

prtSonetXConnectPrtIdx

This object indicates a unique port or interface number.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.2

prtSonetXConnectConPrtIdx

This object indicates the connected port.
For port numbering, see product's spec.
For some products, the numbering can equal ifIndex.
notApplicable - will be indicated as 255.

SNMPv2-SMIInteger32

Constraints:
range: 4-4

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.3

prtSonetXConnectAUGIdx

This object indicates an AUG (Administrative Unit Group) within STM-N.
The valid AUGs values are:
1 for STM-1
1...4 for STM-4,
1..16 for STM-16 and
1..64 for STM-64 (STM-64)
255 designates NA.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.4

prtSonetXConnectTUG3Idx

This object indicates a TUG-3 (Tributary Unit Group 3) within VC-4.
The valid TUG3s are values are 1..3. and 255 which designates NA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.5

prtSonetXConnectTUG2Idx

This object indicates a TUG2 (Tributary Unit Group 2 ) within VC-3.
The valid TUG2's values are 1..7 and 255 which designates NA

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.6

prtSonetXConnectTUnIdx

This object indicates a TUn within TUG-2 or TUG-3
(Tributary Unit n, where n is 2, 12 or 11 within TUG-2,
or 3 within TUG-3)
valid values are
1 for TU-2
1 for TU-3
1..4 for TU-11
1..3 for TU-12
…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.7

prtSonetXConnectRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.8

prtSonetXConnectDirection

TU direction of connection.
rx=Drop
tx=Add
both = Add & Drop

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.9

prtSonetXConnectTuNumber

This object indicates which TU is used in prtSonetXConnectTUnIdx

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.2.3.1.1.10

prtSDs3IfTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.1 · 1 row entry · 2 columns

Open in standard view

The DS3 interface table.

prtDs3IfEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.1.1

An entry in the DS3 interface table.

Indexes

DS1-MIBdsx1LineIndex

Column Syntax OID

prtDs3IfTimeElapsed

The number of seconds that have elapsed since
the beginning of the near end current error-
measurement period.

Integer32

.1.3.6.1.4.1.164.3.1.6.3.1.1.1.1

prtDs3IfValidIntervals

The number of previous near end intervals for
which valid data was collected. The value will be
96 unless the interface was brought online within
the last 24 hours, in which case the value will be
the number of complet…

Integer32

Enumerated Values:

1	csu
2	dsu

.1.3.6.1.4.1.164.3.1.6.3.1.1.1.2

prtDs3CurrentTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.2 · 1 row entry · 19 columns

Open in standard view

The DS3 Current table.

prtDs3CurrentEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.2.1

An entry in the DS3 Current table.

Indexes

No indexes recorded

Column Syntax OID

prtDs3CurrentLOS

The counter associated with the number of LOS
seconds, encountered by a DS3 interface in
the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	other
2	sec1
3	sec10

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.1

prtDs3CurrentOOF

The counter associated with the number of OOF
seconds, encountered by a DS3
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.2

prtDs3CurrentLOC

The counter associated with the number of LOC
seconds, encountered by a DS3
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.3

prtDs3CurrentAIS

The counter associated with the number of AIS
seconds, encountered by a DS3
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.4

prtDs3CurrentRDI

The counter associated with the number of RDI
seconds, encountered by a DS3
interface.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	notActive
3	active

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.5

prtDs3CurrentUAS

The counter associated with the number of UAS,
encountered by a SONET interface.

SNMPv2-SMIGauge32

Enumerated Values:

1	off
2	on

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.6

prtDs3CurrentBIP

The counter associated with the number of
BIP errors, encountered by a DS3
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	loopTiming
2	localTiming
3	throughTiming
4	adaptive

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.7

prtDs3CurrentFEBE

The counter associated with the number of
FEBE errors, encountered by a DS3
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	disable
3	enable

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.8

prtDs3CurrentSLM

The counter associated with the number of SLM
seconds, encountered by an E3 (only )
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 4-4

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.9

prtDs3CurrentSES

The counter associated with the number of SES
encountered by a E3
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

2	notExist
3	exist

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.10

prtDs3CurrentES

The number of Errored Seconds, encountered by a
DS3 interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.11

prtDs3CurrentBitParity

Bit Parity Error counter. Relevant to T3 only.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.12

prtDs3CurrentPlcpLOF

The counter associated with the number of LOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals. This counter is relevant for plcpInternal(5)
or plcpExternal(6) configur…

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	v35
3	x21
4	rs530

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.13

prtDs3CurrentPlcpRAI

Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	nx56Kbps
3	nx64Kbps

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.14

prtDs3CurrentPlcpBIP

The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute
interval. This counter is relevant for PLCP (external/internal)
frame types only.

SNMPv2-SMIGauge32

Enumerated Values:

1	internal
2	external

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.15

prtDs3CurrentPlcpFEBE

The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current
15 minute interval. This counter is relevant for PLCP
(external/internal) frame types only.

SNMPv2-SMIGauge32

Enumerated Values:

1	dce
2	dte

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.16

prtDs3CurrentBPV

Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the current 15 minute interval.
This object is relevant only for Electrical Line
of Fomi-E3/T3.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	internal
3	external
4	disable

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.17

prtDs3CurrentLCE

Number of LCE (Link Code Errors) encountered
by a DS3 interface in the current 15 minute interval.
This object is relevant only for Optical Links
of Fomi-E3/T3.

SNMPv2-SMIGauge32

Enumerated Values:

1	normal
2	inverse

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.18

prtDs3CurrentStatus

The statuses of the current interval:
0 - Valid.
1 - redundantLinkSwitch - the link has been switched
by a redundancy mechanism.
2 - discontinuity - module was partialy out.
4 - notValid - module is out.

OctetString

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.164.3.1.6.3.1.2.1.19

prtDs3IntervalTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.3 · 1 row entry · 20 columns

Open in standard view

The DS3 Interval table.

prtDs3IntervalEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.3.1

An entry in the DS3 Interval table.

Indexes

No indexes recorded

Column Syntax OID

prtDs3IntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).

Integer32

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.1

prtDs3IntervalLOS

The counter associated with the number of LOS
seconds , encountered by a DS3 interface in
one of the previous 96, individual 15 minute,
intervals.

SNMPv2-SMIGauge32

Enumerated Values:

1	normal
2	inverse

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.2

prtDs3IntervalOOF

The counter associated with the number of OOF
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.3

prtDs3IntervalLOC

The counter associated with the number of LOC
seconds, encountered by a DS3
interface in one of the previous 96,
individual 15 minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.4

prtDs3IntervalAIS

The counter associated with the number of AIS
seconds, encountered by a SONET
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-255

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.5

prtDs3IntervalRDI

The counter associated with the number of RDI
seconds, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

1	master
2	fallback

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.6

prtDs3IntervalUAS

The counter associated with the number of UAS,
encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

1	none
2	internal
3	rxClk
4	station
5	lbt
6	ntr
7	adaptive
255	notApplicable

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.7

prtDs3IntervalBIP

The counter associated with the number of
BIP errors, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.8

prtDs3IntervalFEBE

The counter associated with the number of
FEBE errors, encountered by a DS3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	f1544Khz
3	f2048Khz

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.9

prtDs3IntervalSLM

The counter associated with the number of SLM
seconds, encountered by an E3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.10

prtDs3IntervalSES

The counter associated with the number of SES
encountered by a E3
interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.11

prtDs3IntervalES

The number of Errored Seconds, encountered by a
DS3 interface in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.12

prtDs3IntervalBitParity

Bit Parity Error counter. Relevant to T3 only.

SNMPv2-SMIGauge32

Enumerated Values:

1	tx
2	rx
3	compress
4	priority
5	loadSharing
6	facs
7	codConnect
8	codDisconnect

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.13

prtDs3IntervalPlcpLOF

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.14

prtDs3IntervalPlcpRAI

Receiving Yellow/Remote Alarm Indication. This counter is
relevant for PLCP (external/internal) frame types only.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.15

prtDs3IntervalPlcpBIP

The counter associated with the number of BIP errors,
encountered by a DS3 interface in the current 15 minute
interval. This counter is relevant for PLCP (external/internal)
frame types only.

SNMPv2-SMIGauge32

Enumerated Values:

1	unassigned-cond
2	broadcast-msge
3	multicast-msge
4	all-msge
5	none

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.16

prtDs3IntervalPlcpFEBE

The counter associated with the number of FEBE
errors, encountered by a DS3 interface in the current
15 minute interval. This counter is relevant for PLCP
(external/internal) frame types only.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.17

prtDs3IntervalBPV

Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the specified 15 minute interval.
This object is relevant only for Electrical Line
of Fomi-E3/T3.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.18

prtDs3IntervalLCE

Number of LCE (Link Code Errors) encountered
by a DS3 interface in the specified 15 minute interval.
This object is relevant only for Optical Links
of Fomi-E3/T3.

SNMPv2-SMIGauge32

Enumerated Values:

1	mac
2	llc
3	net

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.19

prtDs3IntervalStatus

OctetString

.1.3.6.1.4.1.164.3.1.6.3.1.3.1.20

prtDs3TotalTable

table

.1.3.6.1.4.1.164.3.1.6.3.1.4 · 1 row entry · 3 columns

Open in standard view

A list of Total entries.

prtDs3TotalEntry entry .1.3.6.1.4.1.164.3.1.6.3.1.4.1

An entry of Total table.

Indexes

No indexes recorded

Column Syntax OID

prtDs3TotalUAS

Number of UASs (Unavailable Seconds) , encountered by a
DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.4.1.6

prtDs3TotalBPV

Number of BPVs (Bi-Polar Violations) , encountered by a
DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.

SNMPv2-SMIGauge32

Enumerated Values:

1	mac
2	llc
3	net

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.4.1.17

prtDs3TotalLCE

Number of LCE (Link Code Errors) encountered
by a DS3 interface in the previous 96 intervals.
Invalid 15 minute intervals count as 0.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.3.1.4.1.18

dsx1XCurrentTable

table

.1.3.6.1.4.1.164.3.1.6.4.1.2 · 1 row entry · 11 columns

Open in standard view

A list of current statistics entries.  This table
contains additional objects for the current table.

dsx1XCurrentEntry entry .1.3.6.1.4.1.164.3.1.6.4.1.2.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

No indexes recorded

Column Syntax OID

dsx1CurrentLOS

The counter associated with the number of LOS
seconds, encountered by a DS1 interface in
the current 15 minute interval.

PerfHist-TC-MIBPerfCurrentCount

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.1

dsx1CurrentLOF

The counter associated with the number of LOF
seconds, encountered by a DS1
interface in the current 15 minute interval.

PerfHist-TC-MIBPerfCurrentCount

Enumerated Values:

1	mac
2	llc
3	net

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.2

dsx1CurrentLOC

Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
lost cells delineation .

PerfHist-TC-MIBPerfCurrentCount

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.3

dsx1CurrentAIS

The counter associated with the number of AIS
seconds, encountered by a DS1
interface in the current 15 minute interval.

PerfHist-TC-MIBPerfCurrentCount

Enumerated Values:

1	false
2	true

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.4

dsx1CurrentRAI

Remote Alarm Indication: Transmitted in the outgoing direction
(toward the PABX) over FDL bits when the DS1 device detected
an incoming Loss Of Frame. Received from the far end (PABX)
over FDL when it detec…

PerfHist-TC-MIBPerfCurrentCount

Enumerated Values:

1	block
2	forward
3	route
4	forward-route
5	high-priority
6	noOp
7	delete

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.5

dsx1CurrentLOMF

Loss of Multi-Frame sequence in E1 time slot 16.

PerfHist-TC-MIBPerfCurrentCount

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.6

dsx1CurrentFEBE

Far End Block Errors, as reported in the first bit
of frames 13 and 15, on multiframe E1 lines with CRC4,
in the current 15 minute interval.

PerfHist-TC-MIBPerfCurrentCount

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.7

dsx1CurrentStatus

OctetString

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.8

dsx1CurrentBPV

The counter associated with the number of BPVs (Bi-Polar Violations)
encountered by a DS1 interface in the current 15 minute interval.

PerfHist-TC-MIBPerfCurrentCount

Enumerated Values:

1	connect
2	disconnect

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.9

dsx1CurrentLOCRCMF

Loss of CRC4 Multi-Frame sequence in E1.

PerfHist-TC-MIBPerfCurrentCount

Enumerated Values:

1	answer
2	originate
3	disable
4	answerAndOriginate

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.10

dsx1CurrentLOFC

Counts the number of loss of frame events measured.
encountered in the current 15 minute interval

PerfHist-TC-MIBPerfCurrentCount

Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.2.1.11

dsx1XIntervalTable

table

.1.3.6.1.4.1.164.3.1.6.4.1.3 · 1 row entry · 11 columns

Open in standard view

A list of Interval entries.  This table
contains additional objects for the interval table.

dsx1XIntervalEntry entry .1.3.6.1.4.1.164.3.1.6.4.1.3.1

An entry containing additional statistical counters
applicable to a particular interval table.

Indexes

No indexes recorded

Column Syntax OID

dsx1IntervalLOS

The counter associated with the number of LOS
seconds , encountered by a DS1 interface in
one of the previous 96, individual 15 minute,
intervals.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.1

dsx1IntervalLOF

The counter associated with the number of OOF
seconds, encountered by a DS1
interface in one of the previous 96, individual 15
minute, intervals.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.2

dsx1IntervalLOC

Loss Of Cell delineation. Counts number of cells the ATM UNI cells receiver
lost cells delineation .

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.3

dsx1IntervalAIS

The counter associated with the number of AIS
seconds, encountered by a SONET
interface in one of the previous 96, individual 15
minute, intervals.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.4

dsx1IntervalRAI

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.5

dsx1IntervalLOMF

Loss of Multi-Frame sequence in E1 time slot 16.

PerfHist-TC-MIBPerfIntervalCount

Enumerated Values:

1	mon
2	tue
3	wed
4	thu
5	fri
6	sat
7	sun

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.6

dsx1IntervalFEBE

Far End Block Errors, as reported in the first bit
of frames 13 and 15, on multiframe E1 lines with CRC4,
in one of the previous 96, individual, 15 minute intervals.

PerfHist-TC-MIBPerfIntervalCount

Constraints:
range: 1-3

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.7

dsx1IntervalStatus

OctetString

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.8

dsx1IntervalBPV

The counter associated with the number of BPV (Bi-Polar Violations)
encountered by a DS1 interface in one of the previous 96,
individual 15 minute, intervals.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.9

dsx1IntervalLOCRCMF

Loss of CRC4 Multi-Frame sequence in E1.

PerfHist-TC-MIBPerfIntervalCount

Enumerated Values:

1	valid
2	invalid

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.10

dsx1IntervalLOFC

Counts the number of loss of frame events measured
in one of the previous 96, individual 15 minute, intervals.

PerfHist-TC-MIBPerfIntervalCount

Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.3.1.11

dsx1XTotalTable

table

.1.3.6.1.4.1.164.3.1.6.4.1.4 · 1 row entry · 2 columns

Open in standard view

A list of Total statistics entries.  This table
contains additional objects for the Total table.

dsx1XTotalEntry entry .1.3.6.1.4.1.164.3.1.6.4.1.4.1

An entry containing additional statistical counters
applicable to a particular current table.

Indexes

No indexes recorded

Column Syntax OID

dsx1TotalBPV

The counter associated with the number of BPV (Bi-Polar Violations)
encountered by a DS1 interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.

PerfHist-TC-MIBPerfTotalCount

Enumerated Values:

1	enable
2	disable

Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.4.1.9

dsx1TotalLOFC

The counter associated with the number loss of frames
encountered by a DS1 interface in the previous 24 hour interval.
Invalid 15 minute intervals count as 0.

PerfHist-TC-MIBPerfTotalCount

Textual Convention: PerfHist-TC-MIBPerfTotalCount Unsigned32

.1.3.6.1.4.1.164.3.1.6.4.1.4.1.11

dsx1XConfigTable

table

.1.3.6.1.4.1.164.3.1.6.4.2 · 1 row entry · 14 columns

Open in standard view

An extension to the DS1 Configuration table.

dsx1XConfigEntry entry .1.3.6.1.4.1.164.3.1.6.4.2.1

An entry containing additional configuration
parameters.

Indexes

No indexes recorded

Column Syntax OID

dsx1IdleCode

Byte pattern of the data received/transmitted in the
E1T1 framer idle timeslots.
Valid range: (0 - FF HEX).

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	onPowerOn
2	whenAnyStationOnLan
3	onTraffic
4	onManualConnect

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.1

dsx1LineMode

T1 device operation mode.
Valid for T1 only.

Enumerationr/w

Enumerated Values:

1	noStationOnLan
2	onTraffic
3	onDelayFromConnectionOnRequest
4	onManualDisConnect

.1.3.6.1.4.1.164.3.1.6.4.2.1.2

dsx1dBTxGain

Transmit line Gain for T1 CSU line mode.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.4.2.1.3

dsx1RxSensitivity

Determine the maximum attenuation of the
receive signal that can be compensated for
by the interface receive path. Not applicable for T1.

Enumerationr/w

Enumerated Values:

1	onPowerOn
2	whenAnyStationOnLan
3	onTraffic
4	onManualConnect

.1.3.6.1.4.1.164.3.1.6.4.2.1.4

dsx1RestoreTime

Used to change the sync. algorithms to reduce the time
required for the port to return to normal operation after
a RED alarm.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.4.2.1.5

dsx1TcFirstSignal

Trunk conditioning signal - value to be sent as a signal
during the first 2.5 seconds after alarm detection.
Range is 0x0..0xF. 0xFF is a NULL value. Valid for T1 only.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.6

dsx1TcSignal

Trunk conditioning signal value after alarm detection.
Range is 0x1..0xF for E1, and 0x0..0xF for T1.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.7

dsx1TcPattern

Trunk conditioning data pattern to be sent upon a DS0 fail.
Range is 0x0..0xFF.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.4.2.1.8

dsx1Scramble

Scrambling is an operation that randomizes the bits
of the payload of the ATM cell by a polynom.
This operation helps with the error detection mechanism
of the HEC. Not applicable for E1.
active - will scramble/descram…

Enumerationr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.164.3.1.6.4.2.1.9

dsx1LineAdaptiveTimingMode

Enables end to end clock synchronization.
Default value - off.

Enumerationr/w

Enumerated Values:

1	main
2	alternate

.1.3.6.1.4.1.164.3.1.6.4.2.1.10

dsx1TxClockSource

The source of Transmit Clock.
'loopTiming' indicates that the recovered receive clock
is used as the transmit clock.

'localTiming' indicates that a local clock
source is used or when an external clock …

Enumerationr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.164.3.1.6.4.2.1.11

dsx1AisEnable

Enable/ disable AIS transmit when Ethernet cable (for TDMoIP) is out
(disconnected).

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.4.2.1.12

dsx1TsEchoCancel

This parameter defines for each TS whether Echo-Cancellation is on.
Each bit represents one TS as follows:
First octet bit'0'=not in use bit'1'= TS#1, bit'7' = TS#7, .. 2nd octet bit'0' = TS#8,..,
4th octet bit'7' = TS…

OctetStringr/w

.1.3.6.1.4.1.164.3.1.6.4.2.1.13

dsx1EchoCancelerModule

This parameter indicates whether echo-cancellation module
exists for this line.

Enumeration

.1.3.6.1.4.1.164.3.1.6.4.2.1.14

hdlcTable

table

.1.3.6.1.4.1.164.3.1.6.5.1 · 1 row entry · 11 columns

Open in standard view

The HDLC configuration table.

hdlcEntry entry .1.3.6.1.4.1.164.3.1.6.5.1.1

Defines the contents of each line in the RAD HDLC Table.

Indexes

No indexes recorded

Column Syntax OID

hdlcProtocol

The HDLC protocol type
V35 - HDLC encapsulated over V35
X21 - HDLC encapsulated over X21
RS530 - HDLC encapsulated over RS530

Enumerationr/w

Enumerated Values:

1	other
2	local
3	remote

.1.3.6.1.4.1.164.3.1.6.5.1.1.1

hdlcRateResolution

The baud rate of the internal clock.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.2

hdlcTxClockSource

The baud rate of the internal clock.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.3

hdlcTerminalMode

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.4

hdlcLoopbackState

internal - All data coming from the
network port is looped back
external - All data comming from the line is
looped back.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.5

hdlcTxClockPolarity

normal - The transmitted data is sampled at the middle of bit time
inverse - The transmitted data is sampled at the end of the bit time
(high data rate/long cable).

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.6

hdlcFlowControl

Enable/Disable the CTS/RTS flow control signals.

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.7

hdlcLineRate

The rate values for HDLC are n*56/64Kbps, where 1<=n<=32, 64, 128
and the following values: 1544, 3088, 6176.
The rate values for HSSI is nMbps, where 1<=n<=52.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.1.6.5.1.1.8

hdlcRxClockMode

Enumerationr/w

.1.3.6.1.4.1.164.3.1.6.5.1.1.9

hdlcLOF

Total number of seconds the port is in Loss Of Frame state.

SNMPv2-SMIGauge32

Constraints:
range: 48-48

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.3.1.6.5.1.1.10

hdlcRxClockPolarity

normal - The received data is sampled at the middle of bit time
inverse - The received data is sampled at the end of the bit time
(high data rate/long cable).

Enumerationr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.164.3.1.6.5.1.1.11

sysCClkSrcTable

table

.1.3.6.1.4.1.164.3.3.1.6.1 · 1 row entry · 6 columns

Open in standard view

All the entries of this table are identical (have the 
same value) for all the configurations (1..255) except 
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry.

sysCClkSrcEntry entry .1.3.6.1.4.1.164.3.3.1.6.1.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

sysCClkCnfgIdx

This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.164.3.3.1.6.1.1.1

sysCClkSrcIdx

An index in the table. There are only two entries in the
table.
master - refers Master clock parameters
fallback - refers Fallback clock parameters

Enumeration

.1.3.6.1.4.1.164.3.3.1.6.1.1.2

sysCClkSrcMode

This entry indicates the source the nodal timing is
locked to.
none - is an invalid option for Master clock.
internal - is an invalid option for Fallback clock .
station - is an invalid option for a stand-alone un…

Enumerationr/w

.1.3.6.1.4.1.164.3.3.1.6.1.1.3

sysCClkSrcPrt

This entry is valid only when working in rxClk mode.
For invalid entry the return value will be 9999.

The valid port number depends on the IO slot no., the
installed card type and the port type: outside…

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	permanent
2	dynamic
3	invalid
4	semiDynamic

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.3.1.6.1.1.4

sysCClkStationFreq

This entry indicates the frequency of the station clock
when the source is 'station'.
The value will be applicable only when the sysCClkSrcMode is
'station'.

Enumerationr/w

.1.3.6.1.4.1.164.3.3.1.6.1.1.5

sysCClkRevertiveTimeout

The time in seconds in which the system will monitor the higher
level clock source, before decision to revert to that clock.
In case the time is zero, revertive mode will be disabled.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.3.3.1.6.1.1.6

radBridgeMaskTable

table

.1.3.6.1.4.1.164.4.1.3 · 1 row entry · 20 columns

Open in standard view

Mask tables enable definition of forwarding restrictions and 
control of message flow in the internetwork. Each entry
in this table defines a mask statement consisting of up to 
three mask definitions and an action defined by 
radBridgeMaskOper. Different types of mask entries are supported, 
as defined by radBridgeMaskType.

radBridgeMaskEntry entry .1.3.6.1.4.1.164.4.1.3.1

An entry in table radBridgeMaskTable.

Indexes

No indexes recorded

Column Syntax OID

radBridgeMaskType

Defines the type of mask entry.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.3.1.1

radBridgeMaskIfIndex

Specifies the if Index of the interface to which the mask is applied.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.2

radBridgeMaskNum

The Mask entry number, defined by its line number in the mask
table.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.3

radBridgeMaskDest

Specifies the type of destination address carried by the frame
to which the mask will be applied. Unassigned-condition
deactivates the mask entry.

Enumerationr/w

Enumerated Values:

1	tx
2	rx
3	compress
4	priority
5	loadSharing
6	facs
7	codConnect
8	codDisconnect

.1.3.6.1.4.1.164.4.1.3.1.4

radBridgeMaskPat1

Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.5

radBridgeMaskActiveBit1

Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat1 field.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.6

radBridgeMaskFrom1

Offset base of radBridgeMaskPat1 within the frame.
Net can be in some cases the data start point.

Enumerationr/w

Enumerated Values:

1	unknown
2	ip
3	ipx
4	sna
5	netbios
6	apple
7	dec
255	all

.1.3.6.1.4.1.164.4.1.3.1.7

radBridgeMaskOffset1

Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm1.The mask offset is an even
decimal number in the range of 0 to 1518.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.8

radBridgeMaskCond1

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
radBridgeMaskOffset1 the packet contains data that matches
the content of radBridgeMaskPa…

Enumerationr/w

Enumerated Values:

1	unknown
2	all
3	broadcast
4	multicast

.1.3.6.1.4.1.164.4.1.3.1.9

radBridgeMaskPat2

Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern.

OctetStringr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.3.1.10

radBridgeMaskActiveBit2

Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat2 field.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.11

radBridgeMaskFrom2

Offset base of radBridgeMaskPat2 within the frame.
Net can be in some cases the data start point.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.3.1.12

radBridgeMaskOffset2

Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm2.The mask offset is an even
decimal number in the range of 0 to 1518.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	macAddress
2	netAddress
3	ipRange
4	appleAddress

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.13

radBridgeMaskCond2

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
radBridgeMaskOffset2 the packet contains data that matches
the content of radBridgeMaskPa…

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.3.1.14

radBridgeMaskPat3

Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.15

radBridgeMaskActiveBit3

Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat3 field.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.3.1.16

radBridgeMaskFrom3

Offset base of radBridgeMaskPat3 within the frame.
Net can be in some cases the data start point.

Enumerationr/w

Enumerated Values:

1	macAddress
2	netAddress
3	ipRange
4	appleAddress

.1.3.6.1.4.1.164.4.1.3.1.17

radBridgeMaskOffset3

Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm3. The mask offset is an even
decimal number in the range of 0 to 1518.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	false
2	true

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.3.1.18

radBridgeMaskCond3

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
radBridgeMaskOffset3 the packet contains data that matches
the content of radBridgeMaskPa…

Enumerationr/w

Enumerated Values:

1	unknown
2	ipxRip
3	ipxSap
4	ipxSpx
5	ipUdp
6	ipTcp
7	ipIcmp
8	ipxNcp
9	ipxWan
10	ipxEco
11	ipxErr
12	ipxPep

.1.3.6.1.4.1.164.4.1.3.1.19

radBridgeMaskOper

The type of action to be taken if the frame meets the
conditions of the mask.
noOp = disabled (mask remains on list, but is not active)
delete = mask is removed from the list.

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.3.1.20

radBridgeCODParamTable

table

.1.3.6.1.4.1.164.4.1.4.1 · 1 row entry · 8 columns

Open in standard view

The table of COD parameters

radBridgeCODEntry entry .1.3.6.1.4.1.164.4.1.4.1.1

Each radBridgeCODEntry consists of the following parameters

Indexes

No indexes recorded

Column Syntax OID

radBridgeCODIfIndex

The interface to which this COD entry is applicable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.1

radBridgeCODManualConnect

The management station can start connection manually
by setting this parameter

Enumerationr/w

Enumerated Values:

1	false
2	true

.1.3.6.1.4.1.164.4.1.4.1.1.2

radBridgeCODMode

In answer mode only one incoming call may be accepted at a time. Other nodes
attempting to access the local modem will receive a busy signal until the
connection is terminated. (Answer mode has no difficulty supporting …

Enumerationr/w

Enumerated Values:

1	block
2	forward
3	route
4	forward-route
5	high-priority
6	noOp
7	delete
8	smartMask

.1.3.6.1.4.1.164.4.1.4.1.1.3

radBridgeCODConnectDelay

The connect delay defines the minimum time period that
the link must stay disconnected, between 2 succesive
connections (in seconds).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.4

radBridgeCODisConnectDelay

The disconnect delay defines the minimum time period
the link must stay connected, between 2 succesive
disconnections (in seconds).

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	false
2	true

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.5

radBridgeCODImplicitSwitch

The inplicit switch allows the user to ignore implicit triggers provided
by the COD software.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.4.1.1.6

radBridgeCODNumAccess

The number of successful connections that have been established since
the COD has been reset.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.4.1.4.1.1.7

radBridgeCODTotalConnecTime

The sum of all the connect time intervals since the COD was reset.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.1.1.8

radBridgeCODTimeTriggerTable

table

.1.3.6.1.4.1.164.4.1.4.2 · 1 row entry · 6 columns

Open in standard view

The table of COD parameters

radBridgeCODTimeTriggerEntry entry .1.3.6.1.4.1.164.4.1.4.2.1

Each radBridgeCODTimeTriggerEntry consists of the following parameters

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeCODTimeIfIndex The interface to which this COD Time Trigger entry is applicable.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.4.2.1.1`
radBridgeCODDay The day of the week in which the dial up connection operates.	Enumeration	`.1.3.6.1.4.1.164.4.1.4.2.1.2`
radBridgeCODTimeTriggerNum Every day of the week the user can configure 3 dial up connections.	Integer32	`.1.3.6.1.4.1.164.4.1.4.2.1.3`
radBridgeCODTimeTriggerFrom Time to start Dial Up connection, in format hh:mm.	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.4.1.4.2.1.4`
radBridgeCODTimeTriggerTo Time to terminate Dial Up connection, in format HH:MM.	SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.4.1.4.2.1.5`
radBridgeCODTimeTriggerStatus The status of a table entry.	Enumerationr/w	`.1.3.6.1.4.1.164.4.1.4.2.1.6`

radBridgeCODTrafficTable

table

.1.3.6.1.4.1.164.4.1.4.3.1 · 1 row entry · 2 columns

Open in standard view

The table of COD Traffic trigger

radBridgeCODTrafficEntry entry .1.3.6.1.4.1.164.4.1.4.3.1.1

Each radBridgeCODTrafficEntry consists of the following parameters.

Indexes

intSwdlObjIdx intSwdlFileIdx

Column	Syntax	OID
radBridgeCODProtocolType The Protocol Type of the Traffic Table	Enumerationr/w	`.1.3.6.1.4.1.164.4.1.4.3.1.1.1`
radBridgeCODTrafficTriggerStatus Command of Status of the Protocol Traffic Trigger	Enumerationr/w	`.1.3.6.1.4.1.164.4.1.4.3.1.1.2`

radBridgeCODCondTable

table

.1.3.6.1.4.1.164.4.1.4.4 · 1 row entry · 7 columns

Open in standard view

The table of COD Condition parameters

radBridgeCODCondEntry entry .1.3.6.1.4.1.164.4.1.4.4.1

Each radBridgeCODCondEntry consists of the following parameters

Indexes

No indexes recorded

Column Syntax OID

radBridgeCODCondIfIndex

The interface, this COD entry is applicable to.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.4.1.1

radBridgeCODOriginateConnectCondition

This condition, allows the user to specify the
condition under which the link is connected.
The options are
onPowerOn - On power on.
whenAnyStationOnLan - When any station on lan.
onTraffic - …

Enumerationr/w

.1.3.6.1.4.1.164.4.1.4.4.1.2

radBridgeCODOriginateDisConnectCondition

This condition allows the user to specify the
condition under which the link is disconnected.
The options are:
noStationOnLan - When there is no station on lan.
Counts 15 minutes from the point …

Enumerationr/w

Enumerated Values:

1	notApplicable
2	off
3	on

.1.3.6.1.4.1.164.4.1.4.4.1.3

radBridgeCODOriginateDisConnectDelay

Delay time in seconds.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.4.1.4

radBridgeCODAnswerConnectCondition

CODCondAnswerConnect allows the user to specify
the condition under which the link is connected.
The options are:
onPowerOn - On power on.
whenAnyStationOnLan - When any station on lan.
onTraffic …

Enumerationr/w

.1.3.6.1.4.1.164.4.1.4.4.1.5

radBridgeCODSpecificOnTrafficOIDCondition

A reference to a specific entry in the
radBridgeMaskTable, which describes the
particular COD condition .
If Connect or Disconnect Conditions are not
onTraffic, its value should be set to the
OBJECT IDENTIFIER { 0 0 …

ObjectIdentifier

.1.3.6.1.4.1.164.4.1.4.4.1.6

radBridgeCODDisConnectMinimunFramesNumber

Frames rate.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.4.4.1.7

radBridgeIPXRipTable

table

.1.3.6.1.4.1.164.4.1.5.2.6 · 1 row entry · 9 columns

Open in standard view

The routing table used by RIP to calculate routes to remote
desination networks.

radBridgeIPXRipTableEntry entry .1.3.6.1.4.1.164.4.1.5.2.6.1

The routing information for one of this entity's destination networks.

Indexes

No indexes recorded

Column Syntax OID

radBridgeIPXRipDestNetwork

The destination network address to which this entry's
routing information pertains.

OctetString

.1.3.6.1.4.1.164.4.1.5.2.6.1.1

radBridgeIPXRipPolicy

A value specifying the precidence of the route. A value of
zero means that the route is the best route, a value of one
means that the route is the second best route and so on.

Enumeration

.1.3.6.1.4.1.164.4.1.5.2.6.1.2

radBridgeIPXRipForwardingRouter

The IPX node address of the next hop (router) for the
entry's associated destination network.

OctetStringr/w

.1.3.6.1.4.1.164.4.1.5.2.6.1.3

radBridgeIPXRipNIC

An interface identifier specifying what IPX interface the
next hop can be found on.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.6.1.4

radBridgeIPXRipTickMetric

The metric, in terms of transit time, associated with the route
given by the entry. This time is in terms of 1/18ths of a
second.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.6.1.5

radBridgeIPXRipHopMetric

The metric, in terms of distance , associated with the route
given by the entry.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.6.1.6

radBridgeIPXRipAgingTime

The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.4.1.5.2.6.1.7

radBridgeIPXRipValueStatus

The entry status value; whether the entry is permanent (added
statically), reachable or unreachable. In the latter two cases
it would be added by RIP. A semiDynamic entry is an entry
enterd manualy by the user and can …

Enumerationr/w

Enumerated Values:

1	other
2	v35
3	rs530
4	x21
5	bnc
6	utp
7	aui
8	rs422
9	crossUtp
10	rj45
11	v24
12	g703
13	termBlock3AndRj45
14	terminalBlock3
15	terminalBlock5
16	terminalBlock7
17	db25
18	db15
19	rj45ethernet
20	termBlock5AndRj45
21	db9
22	g703E1
23	g703E1-LTU
24	sc
25	st
26	stl
27	fc
28	tb5w
29	termBlock6AndRj45
30	ethBnc
31	scsi26
32	eth4381
33	twoBnc
34	scsi50
35	twoMiniBnc
36	sf1
37	terminalBlock4
38	sf2
39	db25Balanced
40	v36
41	block4W
42	iripRj45
43	irEthQRj45
44	iripBnc
45	rs530WA
46	v35WA
47	irEthQBnc
48	v35Db25
49	rj11
50	mtrj
51	lc
52	terminalBlock2
53	irEth10s100
54	scsi68
255	none

.1.3.6.1.4.1.164.4.1.5.2.6.1.8

radBridgeIPXRipForwardType

The type of route. Note that local(2) refers to a route for which the
next hop is the final destination; remote(3) refers to a route
for which the next hop is not the final destination.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	nm850
3	nm1300
4	nm1300Laser
5	nm1550Laser

.1.3.6.1.4.1.164.4.1.5.2.6.1.9

radBridgeIPXRipInfTable

table

.1.3.6.1.4.1.164.4.1.5.2.7 · 1 row entry · 3 columns

Open in standard view

The RIP interface table.

radBridgeIPXRipInfEntry entry .1.3.6.1.4.1.164.4.1.5.2.7.1

Each entry corresponds to one ifindex.

Indexes

No indexes recorded

Column Syntax OID

radBridgeIPXRipInfIfIndex

This value of Ifindex is same as radBridgeIPXIfIndex in the
IPX Interface Table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.7.1.1

radBridgeIPXRipInfBcastUpdate

The RIP periodic update interval, in seconds. Zero value
corresponds to infinite interval.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.7.1.2

radBridgeIPXRipInfAgeMultiplier

The holding multiplier for information received in RIP
periodic updates. Zero value corresponds to infinite aging time.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	auto
2	s300bps
3	s1200bps
4	s2400bps
5	s4800bps
6	s9600bps
7	s19200bps
8	s38400bps
9	s57600bps
10	s115200bps

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.2.7.1.3

radBridgeIPXSapTable

table

.1.3.6.1.4.1.164.4.1.5.3.6 · 1 row entry · 9 columns

Open in standard view

The Server Information table is used by SAP to store information
of services which are available on the internetwork.

radBridgeIPXSapTableEntry entry .1.3.6.1.4.1.164.4.1.5.3.6.1

The server information for one of this entity's server entries.

Indexes

No indexes recorded

Column Syntax OID

radBridgeIPXSapServerType

The type of the server for which this entry pertains.

SNMPv2-SMIInteger32

Enumerated Values:

1	notApplicable
2	stopBits1
3	stopBits1dot5
4	stopBits2

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.3.6.1.1

radBridgeIPXSapName

The name of the server for which this entry pertains.

OctetString

Enumerated Values:

1	unknown
2	noUse
3	terminal
4	nmsSlip
5	nmsPpp
6	muxSlip
7	muxPpp
8	dialOut

.1.3.6.1.4.1.164.4.1.5.3.6.1.2

radBridgeIPXSapNetwork

The IPX network address of the host on which this server exists.

OctetStringr/w

Enumerated Values:

1	notApplicable
2	dce
3	dte

.1.3.6.1.4.1.164.4.1.5.3.6.1.3

radBridgeIPXSapNode

The IPX node address of the host on which this server exists.

OctetStringr/w

Enumerated Values:

1	notApplicable
2	on
3	rts
4	dteWait
5	dteIgnore

.1.3.6.1.4.1.164.4.1.5.3.6.1.4

radBridgeIPXSapSocket

The IPX socket number that is being used by the server to
which this entry pertains.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	notApplicable
2	d0
3	d10
4	d50
5	d100
6	d200
7	d300

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.3.6.1.5

radBridgeIPXSapHopsToServer

The number of hops to the entity on which this server exists.

Integer32r/w

Enumerated Values:

1	notApplicable
2	on
3	dtr

.1.3.6.1.4.1.164.4.1.5.3.6.1.6

radBridgeIPXSapNIC

An Network Interface Card identifier specifying what IPX
interface the next hop can be found on.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	notApplicable
2	none
3	proprietary
4	rip2

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.5.3.6.1.7

radBridgeIPXSapAgingTime

The last time that the entry was updated. The time will be
provided in terms of the MIB-I object sysUpTime.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.4.1.5.3.6.1.8

radBridgeIPXSapStatus

The status of the entry.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.5.3.6.1.9

radBridgeIPXSapInfTable

table

.1.3.6.1.4.1.164.4.1.5.3.7 · 1 row entry · 3 columns

Open in standard view

The Sap interface table.

radBridgeIPXSapInfEntry entry .1.3.6.1.4.1.164.4.1.5.3.7.1

Each entry corresponds to one ifindex.

Indexes

No indexes recorded

Column	Syntax	OID
radBridgeIPXSapInfIfIndex This value of Ifindex is same as radBridgeIPXIfIndex in the IPX Interface Table.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.3.7.1.1`
radBridgeIPXSapInfBcastUpdate The SAP periodic update interval, in seconds. Zero value corresponds to infinite interval.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.3.7.1.2`
radBridgeIPXSapInfAgeMultiplier The holding multiplier for information received in SAP periodic updates. Zero value corresponds to infinite aging time.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.4.1.5.3.7.1.3`

maskingTable

table

.1.3.6.1.4.1.164.4.1.6.3 · 1 row entry · 24 columns

Open in standard view

This is the new masking scheme. 
Mask tables enable definition of forwarding restrictions and 
control of message flow in the internetwork. Each entry
in this table defines a mask statement and an action defined by 
maskingOperation.

maskingEntry entry .1.3.6.1.4.1.164.4.1.6.3.1

Defines the contents of each line in the mask table.

Indexes

No indexes recorded

Column Syntax OID

maskingType

Defines the type of mask entry.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.1

maskingIfIndex

Specifies the ifIndex of the interface to which the mask is applied.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.2

maskingIndex

An index to the masking table. This number should not be greater than maskingMaxEntries

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	off
3	on

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.3

maskingProtocolType

The base protocol for masking. IPX, IP, others.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.4

maskingSmartMaskOID

A reference to a specific Smart mask table (old radBridgeMaskTable)
which enables a more specific mask type.
If this information is not available, its value
should be set to the OBJECT IDENTIFIER { 0 0 }.

ObjectIdentifier

.1.3.6.1.4.1.164.4.1.6.3.1.5

maskingFrameType

Enables the user to decide about frame type
* all frame
* just broadcast
* just multicast.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.6

maskingFrameTypeCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingFrameType the packet contains data that matches
the content of maskingFrameType.…

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.7

maskingSourceAddress

The source address is according to the maskingMacOrNet and
maskingProtocolType variables.
In case of 'MAC' enter 6 bytes (48 bit) of source address.
In case of 'NET'
if the maskingProtocolType is IP, this is t…

GenAddressr/w

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.8

maskingSourceActiveBits

Specifies the positions of the wild card characters (*)
in the maskingSourceAddress field. Only the 1's bit will be taken in
considerations.

GenAddressr/w

Enumerated Values:

1	unknown
2	user
3	remoteUnit
4	dteRouter

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.9

maskingSourceMacOrNet

The variable maskingSourceAddress and maskingSourceActiveBits
will be treated as MAC, or NET address.
- If maskingProtocolType = 'all', 'sna', 'netbios', dec or
'unknown', the maskingSourceMacOrNet can be macAddress…

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.10

maskingSourceCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingSourceAddress (in conjunction with maskingSourceActiveBits)
the …

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.11

maskingDestAddress

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
The destination address is according to the maskingMacOrNet and maskingProto…

GenAddressr/w

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.12

maskingDestActiveBits

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
Specifies the positions of the wild card characters (*)
in the maskingDe…

GenAddressr/w

Textual Convention: GenAddress OctetString

Type Constraints:
range: 12

.1.3.6.1.4.1.164.4.1.6.3.1.13

maskingDestMacOrNet

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
- If maskingProtocolType = 'all', 'sna', 'netbios', dec or
'unknown', the…

Enumerationr/w

Enumerated Values:

1	loopTiming
2	localTiming
3	throughTiming
4	adaptive
255	notApplicable

.1.3.6.1.4.1.164.4.1.6.3.1.14

maskingDestCondition

If maskingFrameType = broadcast or multicast, this object
is NOT APPLICABLE.
If maskingFrameType = all or unknown, this object is
applicable.
Specifies the logical condition of the mask pattern:

true - …

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disable
3	enable

.1.3.6.1.4.1.164.4.1.6.3.1.15

maskingLowLevelProt

This field is set in conjunction with the maskingProtocolType variable.
This variable specifies the low level protocol.
The IPX socket entered in maskingDestAddress has priority
over the value of maskingLowLevelProt, w…

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.4.1.6.3.1.16

maskingLowLevelProtCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingLowLevelProt the packet contains data that matches
the content of maskingLowLeve…

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.17

maskingHighLevelProt

This field is set in connection to the maskingProtocolType variable.
This variable specifies the high level protocols (application).
As for today it supports just IP protocol stack.
The object's value is a sum of the fo…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.18

maskingHighLevelProtCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingHighLevelProt the packet contains data that matches
the content of maskingHi…

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.19

maskingPortNum

The port number is the same as in high level protocol. It
specifies the dest. port in IP case or the dest. socket
in case of IPX & apple protocols.
IP - This object is applicable only if none (0) value was selecte…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.20

maskingPortNumCondition

Specifies the logical condition of the mask pattern:

true - Condition is valid if at the position specified by
maskingPortNum the packet contains data that matches
the content of maskingPortNum.…

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.21

maskingOperation

The type of action to be taken if the frame meets the
conditions of the mask.
noOp = disabled (mask remains on list, but is not active)
delete = mask is removed from the list.
smartMask = the operation and desti…

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.22

maskingSrcPortNum

The source port number.
For IP: No Condition.
For IPX: This object is applicable only if the socket entered in
maskingSourceAddress is don't care (00) and maskingLowLevelProt
is NOT ipxRip or ipxS…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.4.1.6.3.1.23

maskingSrcPortNumCondition

The same as 'maskingPortNumCondition'.
Relates to source port.

Enumerationr/w

.1.3.6.1.4.1.164.4.1.6.3.1.24

mngTrapIpTable

table

.1.3.6.1.4.1.164.6.2.7 · 1 row entry · 4 columns

Open in standard view

This table indicates  the destination address of the traps.
Internally it will be limited to ten addresses.

mngEntry entry .1.3.6.1.4.1.164.6.2.7.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

mngID

This value indicates an index of a specific IP address

SNMPv2-SMIInteger32

Enumerated Values:

1	notApplicable
2	r10Mbps
3	r100Mbps

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.7.1.1

mngIP

This value indicates the destination address of the traps. IP 0.0.0.0 removes the entry.

SNMPv2-SMIIpAddressr/w

Enumerated Values:

1	notApplicable
2	no
3	yes

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.6.2.7.1.2

mngIPMask deprecated

This value indicates the mask of the destination addresses of the traps.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.6.2.7.1.3

mngTrapMask

The value of this attribute determines the type of traps the
agent should mask and not send to this NMS. The
value is differently determined for different products. There are
mainly two methods:
- an integer number, …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.7.1.4

trapTable

table

.1.3.6.1.4.1.164.6.2.11 · 1 row entry · 3 columns

Open in standard view

This table includes the last few traps generated by the agent, for future retrieval. The table
has a limited capacity. If traps are not retrieved in proper time, they will be
over-written by new traps

trapEntry entry .1.3.6.1.4.1.164.6.2.11.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
trapID This value indicates an index of a specific trap	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.11.1.1`
trapVal This value is the actual ASCII description of the trap.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.11.1.2`
trapTimeSinceOccurrence This value indicates the amount of time passed since the occurrence of the event that trigger this trap.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.6.2.11.1.3`

intSwdlTable

table

.1.3.6.1.4.1.164.6.2.12.10 · 1 row entry · 8 columns

Open in standard view

This parameters table is for 
internal Software down load. It also includes data 
about all files contained in the Object from which 
down-load is performed.

intSwdlEntry entry .1.3.6.1.4.1.164.6.2.12.10.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
intSwdlObjIdx The index of the object from which down-load is performed.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.12.10.1.1`
intSwdlFileIdx The index of the files included in intSwdlObjIdx. One of these files can be selected to be internally downloaded.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.12.10.1.2`
intSwdlFileName The name of the file.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.10.1.3`
intSwdlFileSwVer The software version of the file.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.10.1.4`
intSwdlSwDate The software version date of the file.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.10.1.5`
intSwdlSize The size of the file.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.6.2.12.10.1.6`
intSwdlCmd The command to down-load a SW file to an object. The Agent will change the value of this MIB object to off(2) automatically, after accepting the command.	Enumerationr/w	`.1.3.6.1.4.1.164.6.2.12.10.1.7`
intSwdlToSubSystem This object defines the subsystem for download. Bit='1'- APPLY to respective sub system. Bit='0'- DO NOT APPLY to respective sub system. For more details see product specification. For every octet bit0=LSB, bit7=MSB	OctetStringr/w	`.1.3.6.1.4.1.164.6.2.12.10.1.8`

swdlStatusTable

table

.1.3.6.1.4.1.164.6.2.12.11 · 1 row entry · 7 columns

Open in standard view

This parameters table is for software download status. 
It also includes data about the files down-loaded or 
attempted to be down-loaded.

swdlStatusEntry entry .1.3.6.1.4.1.164.6.2.12.11.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

swdlStatusTypeIdx

The index of the down-load type (e.g. external (1) or internal (2)).

SNMPv2-SMIInteger32

Enumerated Values:

1	up
2	down
3	unknown

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.12.11.1.1

swdlStatusIdx

The index of the status rows.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.12.11.1.2

swdlStatusFileName

The name of the file.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.11.1.3

swdlStatusSlot

The slot of the updated (or attempted to be updated) object.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.11.1.4

swdlStatusSubSystem

The subsystem that updated (or attempted to be updated).

SNMPv2-TCDisplayString

Enumerated Values:

2	off
3	on
4	factory

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.11.1.5

swdlStatusStatus

The status of the down load process.
Value: Fail (2), OK (3), InProcess (4).

SNMPv2-SMIInteger32

Enumerated Values:

1	notApplicable
2	off
3	inProcess

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.12.11.1.6

swdlStatusTime

This MIB parameter indicates the time SW download was finished.
The format shuld be YYYY-MM-DD, hh:mm:ss

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.12.11.1.7

physicalConnectorTable

table

.1.3.6.1.4.1.164.6.2.15.1 · 1 row entry · 4 columns

Open in standard view

This table includes the connector type of ports or interfaces.

physicalConnectorEntry entry .1.3.6.1.4.1.164.6.2.15.1.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

portIdx

This object is an index of the specific port or interface.
For a port, the index will be as agreed between agent and
application.
For an interface, ifIndex may be used.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.1.1.1

physicalConnector

The connector of the port/interface.
other - none of the specified connectors
none - no connector.

Enumeration

.1.3.6.1.4.1.164.6.2.15.1.1.2

portOptWaveLength

Wave Length of an Optical interface/port in [nm] and specification if
Laser or not.
notApplicable - for non-optical ports.

Enumeration

.1.3.6.1.4.1.164.6.2.15.1.1.3

portOptMode

Laser Mode of an Optical Laser interface/port.
notApplicable - for non-Laser ports.

Enumeration

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.164.6.2.15.1.1.4

prtSpTable

table

.1.3.6.1.4.1.164.6.2.15.2.1 · 1 row entry · 11 columns

Open in standard view

A table.

prtSpEntry entry .1.3.6.1.4.1.164.6.2.15.2.1.1

Supervisory port parameter table.

Indexes

brtrIfIndex

Column Syntax OID

prtSupervisoryIndex

The SP port index.
The LS byte of the integer is the port index 1..255.
The MS byte is different than 0 only if the port belongs to
a module. In that case it is the module number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.15.2.1.1.1

prtSupervisoryRate

This attribute indicates the operation rate (speed) of the
port.
auto - automatic rate selection, by the agent.

Enumerationr/w

Enumerated Values:

1	bridge
2	router
3	brouter
4	off

.1.3.6.1.4.1.164.6.2.15.2.1.1.2

prtSupervisoryDataBits

This attribute indicates the number of data bits in an async
frame

Enumerationr/w

.1.3.6.1.4.1.164.6.2.15.2.1.1.3

prtSupervisoryParity

This attribute indicates the parity mode in an async frame

Enumerationr/w

.1.3.6.1.4.1.164.6.2.15.2.1.1.4

prtSupervisoryStopBits

This attribute indicates the parity mode in an async frame.

Enumeration

.1.3.6.1.4.1.164.6.2.15.2.1.1.5

prtSupervisoryUsage

This attribute indicates the usage of the SP port.

Enumerationr/w

.1.3.6.1.4.1.164.6.2.15.2.1.1.6

prtSupervisoryInterface

This attribute indicates the supervisory port interface.

Enumerationr/w

.1.3.6.1.4.1.164.6.2.15.2.1.1.7

prtSupervisoryCTS

CTS line state.

Enumerationr/w

.1.3.6.1.4.1.164.6.2.15.2.1.1.8

prtSupervisoryDcdDelay

DCD delay in msec.

Enumerationr/w

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.164.6.2.15.2.1.1.9

prtSupervisoryDSR

DSR line state.

Enumerationr/w

.1.3.6.1.4.1.164.6.2.15.2.1.1.10

prtSupervisoryRoutProtocol

This attribute indicates the routing protocol of the port.
notApplicable - for DP.

Enumerationr/w

Enumerated Values:

1	no
2	yes

.1.3.6.1.4.1.164.6.2.15.2.1.1.11

prtPerfTable

table

.1.3.6.1.4.1.164.6.2.15.3.1 · 1 row entry · 10 columns

Open in standard view

This table includes G.826 ports or interfaces.

prtPerfEntry entry .1.3.6.1.4.1.164.6.2.15.3.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
prtPerfIdx This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.1`
prtPerfPeriodRef This object is an index that specifies which period of time, the next 5 objects refer to. currentPeriod - the period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndResetCmd w…	Enumeration	`.1.3.6.1.4.1.164.6.2.15.3.1.1.2`
prtPerfElapsedTime Elapsed Time in seconds. - for prtPerfPeriodRef=currentPeriod: The period since last prtPerfSaveAndResetCmd received or since Start-up (if no prtPerfSaveAndResetCmd was received since Start-up) until now. - for prt…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.3`
prtPerfUAS Number of Unavailable Seconds for the reference period (prtPerfPeriodRef).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.4`
prtPerfES Number of Errored Seconds for the reference period (prtPerfPeriodRef).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.5`
prtPerfSES Number of Severely Errored Seconds for the reference period (prtPerfPeriodRef).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.6`
prtPerfBBE Number of Background Block (or Frame) Errors for the reference period (prtPerfPeriodRef).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.7`
prtPerfBlocksPerSec Blocks per second (or frames per second) of the port/interface indicated by portIdx. This object is constant for a certain port/interface. It is not affected by the prtPerfPeriodRef index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.8`
prtPerfTimeTag Time Tag of Last Period: sysUpTime when last prtPerfSaveAndResetCmd was executed. This object is applicable only for prtPerfPeriodRef=lastPeriod. For prtPerfPeriodRef=currentPeriod, the value will always be 0.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.6.2.15.3.1.1.9`
prtPerfSaveAndResetCmd A command per port/interface, to Save data of Current Period in Last Period data-set and start a new counting period for Current Period. This object is applicable only for prtPerfPeriodRef=currentPeriod. Setting this ob…	Enumerationr/w	`.1.3.6.1.4.1.164.6.2.15.3.1.1.10`

prtTestTable

table

.1.3.6.1.4.1.164.6.2.15.4.1 · 1 row entry · 4 columns

Open in standard view

This table includes test data for ports or interfaces.

prtTestEntry entry .1.3.6.1.4.1.164.6.2.15.4.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
prtTestIdx This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used.	SNMPv2-SMIInteger32 Constraints: `range: 0-96` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.4.1.1.1`
prtTestCmdAndStatus Setting this object to a value as detailed further on (except 0) will initiate a test on the specific port. The test/s requested will be set according to the respective bit. The value of this object will be a sum of (…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.4.1.1.2`
prtBertCounter This object indicates the number of BERT errors encountered during the BERT operation. It is valid only when BERT (Bit Error Rate Test) is active on the specific port. The Counter starts from zero (0) anytime BERT is i…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.4.1.1.3`
prtTestInitiator This object indicates who initiated this port's test/s.	Enumeration	`.1.3.6.1.4.1.164.6.2.15.4.1.1.4`

prtParamTable

table

.1.3.6.1.4.1.164.6.2.15.5.1 · 1 row entry · 6 columns

Open in standard view

This table includes general port parameters. The meaning is
different for every product that supports it due to a general
parameter - prtControlCnfg.
          
For ACE2002:
This table is used as a mechanism to create the next interface index.
The algorithm description: 
The NMS will send the agent the following get command: get(nextIfIndex.index), 
where index=interface on which the new index is dependent on. 
Upon this command the agent will generate and return the new index to the NMS.

prtParamEntry entry .1.3.6.1.4.1.164.6.2.15.5.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
prtParamIdx This object is an index of the specific port or interface. For a port, the index will be as agreed between agent and application. For an interface, ifIndex may be used. For ACE2002: This parameter is the…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.5.1.1.1`
prtControlCnfg This object may be used for port RW general parameter/s. For detailed meaning, see product's spec. Supported by: PRBi-E3/T3. For ACE2002: This parameter will include the value of the new index generated …	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.5.1.1.2`
prtParamClkSrc The source of Transmit Clock. 'loopTiming' or 'loopback' indicates that the recovered receive clock is used as the transmit clock. 'localTiming' or 'internal' indicates that a local clock source is use…	Enumerationr/w	`.1.3.6.1.4.1.164.6.2.15.5.1.1.3`
prtParamPhantom Power feeding to another device.	Enumerationr/w Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.6.2.15.5.1.1.4`
prtParamResetStatsCmd Reset statistics of the selected port.	Enumerationr/w	`.1.3.6.1.4.1.164.6.2.15.5.1.1.5`
prtParamLastResetStatsTime The value of MIB II's sysUpTime object at the last time that prtParamResetStatsCmd was Set to on(3) for this port. If prtParamResetStatsCmd was never Set to on(3) since last re-initialization of the agent, then this…	SNMPv2-TCTimeStamp Textual Convention: SNMPv2-TCTimeStamp `Unsigned32`	`.1.3.6.1.4.1.164.6.2.15.5.1.1.6`

prtIpParamTable

table

.1.3.6.1.4.1.164.6.2.15.6.1 · 1 row entry · 12 columns

Open in standard view

A table - Parameters for IP Ports.

prtIpParamEntry entry .1.3.6.1.4.1.164.6.2.15.6.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
prtIpParamConfigIdx This object indicates the Configuration number (1..255) referred. Value of 255 specifies the TmpCnfg (Scratch). For products having Agent and Edit configurations, Write operation for the table entries is allowed only …	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.1`
prtIpParamSlotIdx This object indicates a unique number of the slot position in which the module is inserted. notApplicable = 255 (for products that don't have slots). For KM: kmxMlA (103), kmxMlB (104).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.2`
prtIpParamIdx This object indicates a unique Port Index.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.3`
prtIpParamHostIP The host interface IP address.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.4`
prtIpParamHostMask The host interface subnet mask.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.5`
prtIpParamDefaultGateway Default Gateway's IP Address.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.6`
prtIpParamMediaMode This object indicates the real Media Mode.	Enumeration	`.1.3.6.1.4.1.164.6.2.15.6.1.1.7`
prtIpParamMediaRate This object indicates the real Media Rate (Mbps).	Enumeration	`.1.3.6.1.4.1.164.6.2.15.6.1.1.8`
prtIpParamMngVlanSupport Management VLAN support (Tagging). no - No support of VLAN Tagging. yes - 4 VLAN bytes will be added to the frame.	Enumerationr/w	`.1.3.6.1.4.1.164.6.2.15.6.1.1.9`
prtIpParamMngVlanId Management VLAN ID.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.10`
prtIpParamMngVlanPriority Management VLAN Frame priority.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.15.6.1.1.11`
prtIpParamRingMode This object indicates If Ring Mode is enabled or not.	Enumerationr/w	`.1.3.6.1.4.1.164.6.2.15.6.1.1.12`

systemPsTable

table

.1.3.6.1.4.1.164.6.2.25 · 1 row entry · 4 columns

Open in standard view

This table describes the PS types of a device.
Usage of this table is specified in the device's NMS SRS

systemPsEntry entry .1.3.6.1.4.1.164.6.2.25.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
systemPsIndex1 First Index. In HUBs: 1 = PS-A slot 2 = PS-B slot. In SA units: 1 = PS1 2 = PS2 Default = 1	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.25.1.1`
systemPsIndex2 Second Index. In HUBs: 1 always. In SA units: 1 = Local 2 = Remote Default = 1.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.6.2.25.1.2`
systemPsType The type of PS, for a stand-alone product. acDc - AC with rj45 DC. acPF - Power Feeding (phantom) box that is feeding another box by external AC. dcPF - Power Feeding (phantom) box that is feeding another box by externa…	Enumeration	`.1.3.6.1.4.1.164.6.2.25.1.3`
systemPsStatus The Status of the PS unit.	Enumeration	`.1.3.6.1.4.1.164.6.2.25.1.4`

xcTable

table

.1.3.6.1.4.1.164.6.2.31 · 1 row entry · 9 columns

Open in standard view

Configuration of system cross-connect entries.
The table follows the behavior described in RFC 2515, 
RFC 1604 regarding the creation deletion and modification 
of an entry within the table.

xcEntry entry .1.3.6.1.4.1.164.6.2.31.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

xcIndex

Cross Connect Identifier.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.1

xcIfIndex1

The interface Index from the ifTable, which identify one side
of the connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.2

xcVpi

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.3

xcVci

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.4

xcIfIndex2

The interface Index from the ifTable, which identifies the other
side of the connection.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.31.1.5

xcRowStatus

This parameter allows NMS to create/delete entries of this table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.6.2.31.1.6

xcDescr

A textual string containing information about the
xc entry.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.6.2.31.1.7

xcAdminStatus

The desired administrative status of this
bi-directional cross-connect.

Enumerationr/w

.1.3.6.1.4.1.164.6.2.31.1.8

xcOperStatus

The operational status of this bi-directional
cross-connect.

Enumeration

.1.3.6.1.4.1.164.6.2.31.1.9

modlParamTable

table

.1.3.6.1.4.1.164.6.2.32.1.1 · 1 row entry · 3 columns

Open in standard view

This table include parameters for system modules.

modlParamEntry entry .1.3.6.1.4.1.164.6.2.32.1.1.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

modlParamIndex

The module index.

SNMPv2-SMIInteger32

Enumerated Values:

2	forward
3	backward

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.6.2.32.1.1.1.1

modlParamReset

Reset action to be performed on the module.
Set the parameter will be done always to on(3) or factory (4).
After performing the Reset operation, Agent will automatically set the parameter to off(2).

Enumerationr/w

.1.3.6.1.4.1.164.6.2.32.1.1.1.2

modlParamSwdlStatus

This parameter indicates whatever the swdl is in process or not.

Enumeration

.1.3.6.1.4.1.164.6.2.32.1.1.1.3

rtrIfIpTable

table

.1.3.6.1.4.1.164.11.7.3.1 · 1 row entry · 5 columns

Open in standard view

Router interfaces table.

rtrIfIpEntry entry .1.3.6.1.4.1.164.11.7.3.1.1

An entry in table rtrIfIpTable.

Indexes

No indexes recorded

Column Syntax OID

rtrIfIp

IP Address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.1.1.1

rtrIfRowStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.7.3.1.1.2

rtrIfIpMask

IP mask Address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.11.7.3.1.1.3

rtrIfIndex

The ifIndex connection, on which the IP is determined.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.1.1.4

rtrIfMng

An IP interface might be determined as a management
connection (under the product limitations).

Enumerationr/w

.1.3.6.1.4.1.164.11.7.3.1.1.5

brtrIfTable

table

.1.3.6.1.4.1.164.11.7.3.2 · 1 row entry · 3 columns

Open in standard view

LAN interface table.

brtrIfEntry entry .1.3.6.1.4.1.164.11.7.3.2.1

The entries of this table will be created by agent .

Indexes

No indexes recorded

Column Syntax OID

brtrIfIndex

The index of the interface (LAN or ATM).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.2.1.1

brtrIfMode

Connection Mode.

Enumerationr/w

Enumerated Values:

2	normal
3	unacceptable

.1.3.6.1.4.1.164.11.7.3.2.1.2

brtrIfMaxFrameSize

Frame Max Size.

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	normal
4	degraded

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.11.7.3.2.1.3

brtrLanIfTable

table

.1.3.6.1.4.1.164.11.7.3.4 · 1 row entry · 7 columns

Open in standard view

LAN interface table.

brtrLanIfEntry entry .1.3.6.1.4.1.164.11.7.3.4.1

The entries of this table will be created by agent .

Indexes

IF-MIBifIndex atmVpIntervalVpi atmVpIntervalNumber

Column	Syntax	OID
brtrLanIfIndex The index of the LAN entity (physical interface).	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.7.3.4.1.1`
brtrLanIpAddress Host IP address. Applicable for bridge mode connection only.	SNMPv2-SMIIpAddressr/w Constraints: `range: 1-96` Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.11.7.3.4.1.2`
brtrLanIpMask Host IP Mask. Applicable for bridge mode connection only.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.11.7.3.4.1.3`
brtrLanMaxRateEnable This parameter determines the HW ability of the LAN card according to HW.	Enumeration	`.1.3.6.1.4.1.164.11.7.3.4.1.4`
brtrLanMaxRate Max Rate.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.7.3.4.1.5`
brtrLanMng An IP interface might be determined as a management connection (under the product limitations).	Enumerationr/w	`.1.3.6.1.4.1.164.11.7.3.4.1.6`
brtrLanDefaultRouter Default Router's (Gateway's) IP Address. For each LAN interface there may be a different Default Router.	SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.164.11.7.3.4.1.7`

rtrIsdnIfTable

table

.1.3.6.1.4.1.164.11.7.3.5 · 1 row entry · 2 columns

Open in standard view

This table contains ISDN parameters that do not appear in the standard MIBs.

rtrIsdnIfEntry entry .1.3.6.1.4.1.164.11.7.3.5.1

Entries for ISDN parameters that do not appear in the standard MIBs.

Indexes

No indexes recorded

Column	Syntax	OID
rtrIsdnIfMinNumBchans Minimum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature. Dial up on B channels is according to the need of bandwidt…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.7.3.5.1.1`
rtrIsdnIfMaxNumBchans Maximum number of B channels that the ISDN Dialer of the router will use for Dialing out. This parameter will be used for the BOD (Bandwidth On Demand) feature. Dial up on B channels is according to the need of bandwidt…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.11.7.3.5.1.2`

rtrLcrTable

table

.1.3.6.1.4.1.164.11.7.3.6 · 1 row entry · 4 columns

Open in standard view

Least Cost Routing Table.
The user will be able to set a prefix for an outgoing number
that arrives with a predefined prefix in order to redirect
the number for the LCR process to be achieved.

rtrLcrEntry entry .1.3.6.1.4.1.164.11.7.3.6.1

Least Cost Routing Entry.

Indexes

No indexes recorded

Column Syntax OID

rtrLcrOutIfIndex

The outgoing interface Number of the current route.
The incoming interface number is the value of ifIndex.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.164.11.7.3.6.1.1

rtrLcrRowStatus

Row Status for adding/destroying rows.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.11.7.3.6.1.2

rtrLcrInPrefix

This prefix is part of the called number existing in the incoming packet.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.11.7.3.6.1.3

rtrLcrOutPrefix

This prefix will be inserted into the outgoing packet.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.11.7.3.6.1.4

atmIfDataTable

table

.1.3.6.1.4.1.164.12.2.1.1.1 · 1 row entry · 2 columns

Open in standard view

The ATM interface Data table.

atmIfDataEntry entry .1.3.6.1.4.1.164.12.2.1.1.1.1

An entry in the ATM interface Data table.

Indexes

No indexes recorded

Column	Syntax	OID
atmIfTimeElapsed The number of seconds that have elapsed since the beginning of the near end current error- measurement period.	Integer32	`.1.3.6.1.4.1.164.12.2.1.1.1.1.1`
atmIfValidIntervals The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complet…	Integer32	`.1.3.6.1.4.1.164.12.2.1.1.1.1.2`

atmIfCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.1.2 · 1 row entry · 4 columns

Open in standard view

The ATM interface Current table.

atmIfCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.1.2.1

An entry in the ATM interface Current table.

Indexes

No indexes recorded

Column Syntax OID

atmIfCurrentTxCells

The counter associated with the number of transmitted
cells, encountered by an ATM interface in
the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.1.2.1.1

atmIfCurrentRxCells

The counter associated with the number of received
cells, encountered by an ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.1.2.1.2

atmIfCurrentCorrectedHecs

The counter associated with the number of cells with
corrected HEC errors, encountered by an
ATM interface in the current 15 minute
interval.

SNMPv2-SMIGauge32

Enumerated Values:

2	forward
3	backward

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.1.2.1.3

atmIfCurrentUncorrectedHecs

The counter associated with the number of cells with
uncorrected HEC errors, encountered by an ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Constraints:
range: 1-96

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.1.2.1.4

atmIfIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.1.3 · 1 row entry · 5 columns

Open in standard view

The ATM interface Interval table.

atmIfIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.1.3.1

An entry in the ATM interface Interval table.

Indexes

No indexes recorded

Column	Syntax	OID
atmIfIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	`.1.3.6.1.4.1.164.12.2.1.1.3.1.1`
atmIfIntervalTxCells The counter associated with the number of transmitted cells , encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.2`
atmIfIntervalRxCells The counter associated with the number of received cells, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.3`
atmIfIntervalCorrectedHecs The counter associated with the number of cells with corrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.4`
atmIfIntervalUncorrectedHecs The counter associated with the number of cells with uncorrected HEC errors, encountered by an ATM interface in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.3.1.5`

aal5VccXTable

table

.1.3.6.1.4.1.164.12.2.1.1.4 · 1 row entry · 3 columns

Open in standard view

This table is an extension to AAL5 VCC Table.

aal5VccXEntry entry .1.3.6.1.4.1.164.12.2.1.1.4.1

This list contains the additional AAL5 VCC
performance parameters and is indexed
by ifIndex values of AAL5 interfaces
and the associated VPI/VCI values.

Indexes

No indexes recorded

Column	Syntax	OID
aal5VccInFrames The number of frames received via this interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.4.1.1`
aal5VccOutFrames The total number of frames transmitted out of the interface.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.4.1.2`
aal5VccUnknownProtocolFrames The number of frames that were discarded due to unsupported protocol encapsulation on this VCC.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.1.4.1.3`

atmVpCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.1 · 1 row entry · 21 columns

Open in standard view

The ATM VP Current table.

atmVpCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.1.1

An entry in the ATM VP Current table.

Indexes

No indexes recorded

Column Syntax OID

atmVpCurrentVpi

The VPI of the VPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.1

atmVpCurrentRxCellsClp01

The counter associated with the number of transmitted
cells, encountered by the VPL of this ATM interface in
the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.2

atmVpCurrentRxCellsClp0

The counter associated with the number of received
cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	currentPeriod
2	lastPeriod

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.3

atmVpCurrentGcra0Violations

The counter associated with the number of cells
violating GCRA0, encountered by the VPL of this
ATM interface in the current 15 minute
interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.4

atmVpCurrentGcra1Violations

The counter associated with the number of cells
violating GCRA1, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.5

atmVpCurrentRxAIS

The counter associated with the number of received
AIS cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.6

atmVpCurrentTxAIS

The counter associated with the number of transmitted
AIS cells, encountered by the VPL of this ATM
interface in the current 15 minute interval. Not Supported
in the first phase.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.7

atmVpCurrentRxRDI

The counter associated with the number of received
RDI cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

2	forward
3	backward

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.8

atmVpCurrentTxRDI

The counter associated with the number of transmitted
RDI cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	currentPeriod
2	lastPeriod

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.9

atmVpCurrentContinuityLoss

The counter associated with the number of loss of
continuity cells, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.10

atmVpCurrentUAS

The counter associated with the number of Unavailable
Seconds, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.11

atmVpCurrentSES

The counter associated with the number of Severerly Errored
Seconds, encountered by the VPL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.12

atmVpCurrentCDC

Amount of cells dropped in the current 15 minute interval
of the VP connection.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.13

atmVpCurrentTotalDiscards

The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells
originally received with CLP=0 and CLP=1.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.14

atmVpCurrentClp0Discards

The total number of valid ATM cells received with
CLP=0 and discarded by the traffic policing
entity.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.15

atmVpCurrentTotalCellOuts

The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1
cells.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.16

atmVpCurrentClp0CellOuts

The total number of valid ATM cells transmitted
with CLP=0 by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.17

atmVpCurrentTaggedOuts

The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and
transmitted by this VPL.

SNMPv2-SMIGauge32

Enumerated Values:

1	empty
2	full
3	below
4	above

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.18

atmVpCurrentPCR

The maximum traffic rate encountered in the
last interval of the VP connection (monitored once a second).

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.19

atmVpCurrentSCR

The average traffic rate during the last interval of the VP
connection.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.20

atmVpCurrentMCR

MCR - The minimum traffic rate encountered in the last
interval of the VP connection (monitored once a second).

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.1.1.21

atmVpPMCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.2 · 1 row entry · 16 columns

Open in standard view

The ATM VP Current table for Performance Management.

atmVpPMCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.2.1

An entry in the ATM VP Current table for Performance
Management.

Indexes

No indexes recorded

Column	Syntax	OID
atmVpPMCurrentVpi The VPI of the VPL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.1`
atmVpPMCurrentDir The direction of performance management.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.2`
atmVpPMCurrentTxClp01 The counter associated with the number of transmitted CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.3`
atmVpPMCurrentTxClp0 The counter associated with the number of transmitted CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.4`
atmVpPMCurrentRxClp01 The counter associated with the number of received CLP 0+1 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.5`
atmVpPMCurrentRxClp0 The counter associated with the number of received CLP 0 cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.6`
atmVpPMCurrentErroredCells The counter associated with the number of errored cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.7`
atmVpPMCurrentLostCells The counter associated with the number of lost cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.8`
atmVpPMCurrentMisinsertedCells The counter associated with the number of misinserted cells, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.9`
atmVpPMCurrentECB The counter associated with the number of ECB, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.10`
atmVpPMCurrentSECB The counter associated with the number of SECB, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.11`
atmVpPMCurrentES The counter associated with the number of Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.12`
atmVpPMCurrentSES The counter associated with the number of Severely Errored Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.13`
atmVpPMCurrentUAS The counter associated with the number of Unavailable Seconds, encountered by the VPL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.14`
atmVpPMCurrentIntervalQuality If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.15`
atmVpPMCurrentLastDayQuality If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.2.1.16`

atmVpIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.3 · 1 row entry · 22 columns

Open in standard view

The ATM Vp Interval table.

atmVpIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.3.1

An entry in the ATM Vp Interval table.

Indexes

No indexes recorded

Column Syntax OID

atmVpIntervalVpi

The VPI of the VPL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.1

atmVpIntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).

Integer32

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.2

atmVpIntervalRxCellsClp01

The counter associated with the number of transmitted
cells , encountered by an ATM interface/VP in
one of the previous 96, individual 15 minute,
intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.3

atmVpIntervalRxCellsClp0

The counter associated with the number of received
cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.4

atmVpIntervalGcra0Violations

The counter associated with the number of
cells violating GCRA0, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.5

atmVpIntervalGcra1Violations

The counter associated with the number of
cells violating GCRA1, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.6

atmVpIntervalRxAIS

The counter associated with the number of received
AIS cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.7

atmVpIntervalTxAIS

The counter associated with the number of transmitted
AIS cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals. Not supported in the first phase.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.8

atmVpIntervalRxRDI

The counter associated with the number of received
RDI cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.9

atmVpIntervalTxRDI

The counter associated with the number of transmitted
RDI cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.10

atmVpIntervalContinuityLoss

The counter associated with the number of Continuity
Loss cells, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.11

atmVpIntervalUAS

The counter associated with the number of Unavailable
Seconds, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.12

atmVpIntervalSES

The counter associated with the number of Severerly Errored
Seconds, encountered by an ATM
interface/VP in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.13

atmVpIntervalCDC

Amount of cells dropped in the 15 minute interval
of the VP connection.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.14

atmVpIntervalTotalDiscards

The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells
originally received with CLP=0 and CLP=1.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.15

atmVpIntervalClp0Discards

The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing
entity.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.16

atmVpIntervalTotalCellOuts

The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1
cells.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.17

atmVpIntervalClp0CellOuts

The total number of valid ATM cells transmitted
with CLP=0 by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.18

atmVpIntervalTaggedOuts

The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and
transmitted by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.19

atmVpIntervalPCR

The maximum traffic rate encountered in the last
interval of the VP connection (monitored once a second)
encountered by an ATM interface/VP in one of the previous
96, individual 15 minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.20

atmVpIntervalSCR

The average traffic rate during the last interval of the
VP connection , encountered by an ATM interface/VP in one
of the previous 96, individual 15 minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

2	normal
3	unacceptable

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.21

atmVpIntervalMCR

MCR - The minimum traffic rate encountered in the last
interval of the VP connection (monitored once a second)
encountered by an ATM interface/VP in one of the previous
96, individual 15 minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

2	normal
4	degraded

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.3.1.22

atmVpPMIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.4 · 1 row entry · 17 columns

Open in standard view

The ATM Vp Interval table for Performance Management.

atmVpPMIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.4.1

An entry in the ATM Vp Interval table for Performance
Management.

Indexes

IF-MIBifIndex atmVcIntervalVpi atmVcIntervalVci atmVcIntervalNumber

Column	Syntax	OID
atmVpPMIntervalVpi The VPI of the VPL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.1`
atmVpPMIntervalDir The direction of performance management.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.2`
atmVpPMIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.3`
atmVpPMIntervalTxClp01 The counter associated with the number of transmitted CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.4`
atmVpPMIntervalTxClp0 The counter associated with the number of transmitted CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.5`
atmVpPMIntervalRxClp01 The counter associated with the number of received CLP 0+1 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.6`
atmVpPMIntervalRxClp0 The counter associated with the number of received CLP 0 cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.7`
atmVpPMIntervalErroredCells The counter associated with the number of Errored cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.8`
atmVpPMIntervalLostCells The counter associated with the number of Lost cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.9`
atmVpPMIntervalMisinsertedCells The counter associated with the number of Misinserted cells, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.10`
atmVpPMIntervalECB The counter associated with the number of ECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.11`
atmVpPMIntervalSECB The counter associated with the number of SECBs encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.12`
atmVpPMIntervalES The counter associated with the number of Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.13`
atmVpPMIntervalSES The counter associated with the number of Severely Errored Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.14`
atmVpPMIntervalUAS The counter associated with the number of Unavailable Seconds, encountered by an ATM interface/VP in one of the previous 96, individual 15 minute, intervals.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.15`
atmVpPMIntervalQuality If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.16`
atmVpPMIntervalLastDayQuality If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.4.1.17`

atmVpQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.5 · 1 row entry · 3 columns

Open in standard view

The VP QoS table.

atmVpQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.5.1

Indexes

No indexes recorded

Column	Syntax	OID
atmVpQoSPeriodRef This object is an index that specifies which period of time, the next 2 objects refer to. currentPeriod - the period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllSta…	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.5.1.1`
atmVpQoSElapsedTime Elapsed Time in seconds. - for atmVpQoSPeriodRef = currentPeriod: The period since last systemResetAllStatsCmd received or since Start-up (if no systemResetAllStatsCmd was received since Start-up) until now. - for …	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.5.1.2`
atmVpQoSUAS Number of Unavailable Seconds for the reference period (atmVpQoSPeriodRef).	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.5.1.3`

atmVpPMQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.6 · 1 row entry · 5 columns

Open in standard view

The PM VP QoS table.

atmVpPMQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.6.1

Indexes

No indexes recorded

Column Syntax OID

atmVpPMQoSDirection

The direction of performance management.

Enumeration

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.1

atmVpPMQoSPeriodRef

This object is an index that specifies which period of time, the next
5 objects refer to.
currentPeriod - the period since last systemResetAllStatsCmd received or
since Start-up (if no systemResetAllStat…

Enumeration

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.2

atmVpPMQoSCLR

Cell Loss Ratio counter for the reference period (atmVpPMQoSPeriodRef)-
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.3

atmVpPMQoSCER

Cell Error Ratio counter for the reference period (atmVpPMQoSPeriodRef)
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Enumerated Values:

2	forward
3	backward

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.4

atmVpPMQoSCMR

Cell Misinsertion Ratio counter for the reference period (atmVpPMQoSPeriodRef)
defined in accordance with I.356 , cells/sec .

SNMPv2-SMIGauge32

Constraints:
range: 1-96

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.1.6.1.5

atmVpShaperStatTable

table

.1.3.6.1.4.1.164.12.2.1.2.1.7 · 1 row entry · 6 columns

Open in standard view

The ATM VP shaper statistics table.

atmVpShaperStatEntry entry .1.3.6.1.4.1.164.12.2.1.2.1.7.1

An entry in the ATM VP shaper statistics table.

Indexes

No indexes recorded

Column	Syntax	OID
atmVpShaperDiscarded The number of Cells that were discarded in the shaper on that VPC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then rolls over.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.7.1.1`
atmVpShaperOccupation The number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.7.1.2`
atmVpShaperMaxOccupation The Maximum number of Cells that were stored in the buffer, since this VP was activated. This parameter is limited to 20 bits.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.1.7.1.3`
atmVpShaperLevel The occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - buffer is Above the threshold. This is also the trigger to …	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.1.7.1.4`
atmVpShaperEpdDropped The number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable for a EPD/PPD VP only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.7.1.5`
atmVpShaperTotalEpdDropped The Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself every 15 minutes. Applicable for a EPD/PPD VP only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.1.7.1.6`

atmVcCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.1 · 1 row entry · 22 columns

Open in standard view

The ATM VC Current table.

atmVcCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.1.1

An entry in the ATM VC Current table.

Indexes

No indexes recorded

Column Syntax OID

atmVcCurrentVpi

The VPI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.1

atmVcCurrentVci

The VCI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.2

atmVcCurrentRxCellsClp01

The counter associated with the number of transmitted
cells, encountered by the VCL of this ATM interface in
the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

2	normal
3	unacceptable

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.3

atmVcCurrentRxCellsClp0

The counter associated with the number of received
cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

2	normal
4	degraded

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.4

atmVcCurrentGcra0Violations

The counter associated with the number of cells
violating GCRA0, encountered by the VCL of this
ATM interface in the current 15 minute
interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.5

atmVcCurrentGcra1Violations

The counter associated with the number of cells
violating GCRA1, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.6

atmVcCurrentRxAIS

The counter associated with the number of received
AIS cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	currentPeriod
2	lastPeriod

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.7

atmVcCurrentTxAIS

The counter associated with the number of transmitted
AIS cells, encountered by the VCL of this ATM
interface in the current 15 minute interval. Not Supported
in the first phase.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.8

atmVcCurrentRxRDI

The counter associated with the number of received
RDI cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.9

atmVcCurrentTxRDI

The counter associated with the number of transmitted
RDI cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.10

atmVcCurrentContinuityLoss

The counter associated with the number of loss of
continuity cells, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.11

atmVcCurrentUAS

The counter associated with the number of Unavailable
Seconds, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

2	forward
3	backward

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.12

atmVcCurrentSES

The counter associated with the number of Severerly Errored
Seconds, encountered by the VCL of this ATM
interface in the current 15 minute interval.

SNMPv2-SMIGauge32

Enumerated Values:

1	currentPeriod
2	lastPeriod

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.13

atmVcCurrentCDC

Amount of cells dropped in the current 15 minute interval
of the VC connection.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.14

atmVcCurrentTotalDiscards

The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells
originally received with CLP=0 and CLP=1.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.15

atmVcCurrentClp0Discards

The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing
entity.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.16

atmVcCurrentTotalCellOuts

The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1
cells.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.17

atmVcCurrentClp0CellOuts

The total number of valid ATM cells transmitted
with CLP=0 by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.18

atmVcCurrentTaggedOuts

The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and
transmitted by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.19

atmVcCurrentPCR

The maximum traffic rate encountered in the last
interval of the VC connection (monitored once a second).

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.20

atmVcCurrentSCR

The average traffic rate during the last interval
of the VC connection.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.21

atmVcCurrentMCR

MCR - The minimum traffic rate encountered in the last
interval of the VC connection (monitored once a second).

SNMPv2-SMIGauge32

Enumerated Values:

1	empty
2	full
3	below
4	above

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.1.1.22

atmVcPMCurrentTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.2 · 1 row entry · 17 columns

Open in standard view

The ATM VC Current table for Performance Management.

atmVcPMCurrentEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.2.1

An entry in the ATM VC Current table for Performance
Management.

Indexes

No indexes recorded

Column	Syntax	OID
atmVcPMCurrentVpi The VPI of the VCL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.1`
atmVcPMCurrentVci The VCI of the VCL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.2`
atmVcPMCurrentDir The direction of Performance Management.	SNMPv2-SMIInteger32 Constraints: `range: 1-96` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.3`
atmVcPMCurrentTxClp01 The counter associated with the number of transmitted CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.4`
atmVcPMCurrentTxClp0 The counter associated with the number of transmitted CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.5`
atmVcPMCurrentRxClp01 The counter associated with the number of received CLP 0+1 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.6`
atmVcPMCurrentRxClp0 The counter associated with the number of received CLP 0 cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.7`
atmVcPMCurrentErroredCells The counter associated with the number of errored cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.8`
atmVcPMCurrentLostCells The counter associated with the number of lost cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.9`
atmVcPMCurrentMisinsertedCells The counter associated with the number of misinserted cells, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.10`
atmVcPMCurrentECB The counter associated with the number of ECBs encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.11`
atmVcPMCurrentSECB The counter associated with the number of SECBs encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 1-2048` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.12`
atmVcPMCurrentES The counter associated with the number of Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Constraints: `range: 80-80` Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.13`
atmVcPMCurrentSES The counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.14`
atmVcPMCurrentUAS The counter associated with the number of Severely Errored Seconds, encountered by the VCL of this ATM interface in the current 15 minute interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.15`
atmVcPMCurrentIntervalQuality If the number of errors per interval is superior to the atmNteUPLTCR value, the quality of service of the interval is declared as unacceptable.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.16`
atmVcPMCurrentLastDayQuality If the number of errors per 24 hours is superior to the atmNteDPLTCR value, the quality of service of the day is declared as degraded.	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.2.2.1.17`

atmVcIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.3 · 1 row entry · 23 columns

Open in standard view

The ATM Vc Interval table.

atmVcIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.3.1

An entry in the ATM Vc Interval table.

Indexes

atmNteManagerIP atmNteManagerPvc

Column Syntax OID

atmVcIntervalVpi

The VPI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.1

atmVcIntervalVci

The VCI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.2

atmVcIntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).

Integer32

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.3

atmVcIntervalRxCellsClp01

The counter associated with the number of transmitted
cells , encountered by an ATM interface/VC in
one of the previous 96, individual 15 minute,
intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.4

atmVcIntervalRxCellsClp0

The counter associated with the number of received
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.5

atmVcIntervalGcra0Violations

The counter associated with the number of
cells violating GCRA0, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.6

atmVcIntervalGcra1Violations

The counter associated with the number of
cells violating GCRA1, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.7

atmVcIntervalRxAIS

The counter associated with the number of received
AIS cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.8

atmVcIntervalTxAIS

The counter associated with the number of transmitted
AIS cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals. Not supported in the first phase.

SNMPv2-SMIGauge32

Enumerated Values:

2	no
3	yes

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.9

atmVcIntervalRxRDI

The counter associated with the number of received
RDI cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.10

atmVcIntervalTxRDI

The counter associated with the number of transmitted
RDI cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.11

atmVcIntervalContinuityLoss

The counter associated with the number of Continuity
Loss cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.12

atmVcIntervalUAS

The counter associated with the number of Unavailable
Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.13

atmVcIntervalSES

The counter associated with the number of Severerly Errored
Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

1	off
2	on

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.14

atmVcIntervalCDC

Amount of cells dropped in the 15 minute interval
of the VC connection.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.15

atmVcIntervalTotalDiscards

The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells
originally received with CLP=0 and CLP=1.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.16

atmVcIntervalClp0Discards

The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing
entity.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.17

atmVcIntervalTotalCellOuts

The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1
cells.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.18

atmVcIntervalClp0CellOuts

The total number of valid ATM cells transmitted
with CLP=0 by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.19

atmVcIntervalTaggedOuts

The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and
transmitted by this VPL.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.20

atmVcIntervalPCR

The maximum traffic rate encountered in the
last interval of the VC connection (monitored once a second)
encountered by an ATM interface/VC in one of the previous 96,
individual 15 minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.21

atmVcIntervalSCR

The average traffic rate during the last interval
of the VC connection, encountered by an ATM interface/VC
in one of the previous 96, individual 15 minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.22

atmVcIntervalMCR

MCR - The minimum traffic rate encountered in the last
interval of the VC connection (monitored once a second)
encountered by an ATM interface/VC in one of the previous 96,
individual 15 minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.3.1.23

atmVcPMIntervalTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.4 · 1 row entry · 18 columns

Open in standard view

The ATM Vc Interval table for Performance Management.

atmVcPMIntervalEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.4.1

An entry in the ATM Vc Interval table for Performance
Management.

Indexes

No indexes recorded

Column Syntax OID

atmVcPMIntervalVpi

The VPI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.1

atmVcPMIntervalVci

The VCI of the VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.2

atmVcPMIntervalDir

The direction of Performance Management.

Enumeration

Enumerated Values:

endToEnd

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.3

atmVcPMIntervalNumber

A number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the least recently completed 15 minutes interval
(assuming that all 96 intervals are valid).

Integer32

Enumerated Values:

1	aisAndRdi
2	loopback

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.4

atmVcPMIntervalTxClp01

The counter associated with the number of transmitted
CLP 0+1 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.5

atmVcPMIntervalTxClp0

The counter associated with the number of transmitted
CLP 0 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

2	disable
3	enable

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.6

atmVcPMIntervalRxClp01

The counter associated with the number of received
CLP 0+1 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.7

atmVcPMIntervalRxClp0

The counter associated with the number of received
CLP 0 cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.8

atmVcPMIntervalErroredCells

The counter associated with the number of Errored
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.9

atmVcPMIntervalLostCells

The counter associated with the number of Lost
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.10

atmVcPMIntervalMisinsertedCells

The counter associated with the number of Misinserted
cells, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.11

atmVcPMIntervalECB

The counter associated with the number of ECBs
encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	sc13mR155
3	st13sR155
4	st13lR155
5	utpR155
6	cxBncR155
7	e3
8	t3
9	e1
10	e1Ltu
11	fc13lR155
12	fc13lhR155
13	fc15lhR155
14	fc13lE3
15	fc13lhE3
16	fc15lhE3
17	fc13lT3
18	fc13lhT3
19	fc15lhT3
20	t1
21	eth
22	ethE1CesBnc
23	ethE1CesRj45
24	ethT1CesRj45
25	e1CesRj45
26	e1CesBnc
27	t1CesRj45
28	e14Ces
29	e14CesRj45
30	t14CesRj45
31	hdlc4port
32	hdlcE14CesBnc
33	hdlcE14CesRj45
34	hdlcT14CesRj45
35	e1Rj45
36	e1Bnc
37	ethE14CesBnc
38	ethE14CesRj45
39	ethT14CesRj45
40	hdlc1portHssi
41	hdlcHssiE14CesBnc
42	hdlcHssiE14CesRj45
43	hdlcHssiT14CesRj45
44	e14ImaRj45
45	e14ImaBnc
46	t14ImaRj45
47	ethE3CesBnc
48	ethT3CesBnc
49	smSf1R155
50	smSf2R155
51	sc13sR155
52	sc13lR155
53	utp25
54	sc13lhR155
55	sc15lhR155
56	sc13ljR155
57	sc13lhjR155
58	sc15lhjR155
59	e18Ces
60	e18CesRj45
61	t18CesRj45
62	sc13mR622
73	sc13lR622
74	sc13lhR622
76	fr4Port
77	t3j
78	fr1Port
79	hdlc1Port
255	empty

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.12

atmVcPMIntervalSECB

The counter associated with the number of SECBs
encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.13

atmVcPMIntervalES

The counter associated with the number of Errored
Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.14

atmVcPMIntervalSES

The counter associated with the number of Severely
Errored Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Constraints:
range: 1-96

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.15

atmVcPMIntervalUAS

The counter associated with the number of Unavailable
Seconds, encountered by an ATM
interface/VC in one of the previous 96, individual 15
minute, intervals.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.16

atmVcPMIntervalQuality

If the number of errors per interval is superior to
the atmNteUPLTCR value, the quality of service of
the interval is declared as unacceptable.

Enumeration

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.17

atmVcPMIntervalLastDayQuality

If the number of errors per 24 hours is superior to
the atmNteDPLTCR value, the quality of service of
the day is declared as degraded.

Enumeration

.1.3.6.1.4.1.164.12.2.1.2.2.4.1.18

atmVcQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.6 · 1 row entry · 3 columns

Open in standard view

The ATM VP QoS table.

atmVcQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.6.1

An entry in the ATM VP table.

Indexes

No indexes recorded

Column Syntax OID

atmVcQoSPeriodRef

This object is an index that specifies which period of time, the next
2 objects refer to.
currentPeriod - the period since last systemResetAllStatsCmd received or
since Start-up (if no systemResetAllS…

Enumeration

Enumerated Values:

1	other
2	sonet
3	sdh
4	direct
5	plcpInternal
6	plcpExternal
7	e3
8	ethCrcTrans
9	ethCrcNotTrans
10	directNoScrmbling
11	plcpInternalNoScrmbling
12	plcpExternalNoScrmbling

.1.3.6.1.4.1.164.12.2.1.2.2.6.1.1

atmVcQoSElapsedTime

Elapsed Time in seconds.
- for atmVcQoSPeriodRef = currentPeriod:
The period since last systemResetAllStatsCmd received or since Start-up
(if no systemResetAllStatsCmd was received since Start-up) until now.
- for …

SNMPv2-SMIInteger32

Enumerated Values:

1	notApplicable
2	sc13m-155
3	st13s-155
4	st13l-155
5	utp-155
6	cx-bnc-155
7	e3
8	t3
9	e1
10	e1-ltu
11	fc13l-155
12	fc13lh-155
13	fc15lh-155
14	fc13l-e3
15	fc13lh-e3
16	fc15lh-e3
17	fc13l-t3
18	fc13lh-t3
19	fc15lh-t3

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.1.2.2.6.1.2

atmVcQoSUAS

Number of Unavailable Seconds for the reference period (atmVcQoSPeriodRef).

SNMPv2-SMIGauge32

Enumerated Values:

2	bits15
3	bits17

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.6.1.3

atmVcPMQoSTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.7 · 1 row entry · 5 columns

Open in standard view

The PM VC QoS table.

atmVcPMQoSEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.7.1

An entry in the VC PM QoS table.

Indexes

No indexes recorded

Column Syntax OID

atmVcPMQoSDirection

The direction of performance management.

Enumeration

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.1

atmVcPMQoSPeriodRef

Enumeration

Enumerated Values:

2	disable
3	enable

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.2

atmVcPMQoSCLR

Cell Loss Ratio counter for the reference period (atmVcPMQoSPeriodRef)-
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.3

atmVcPMQoSCER

Cell Error Ratio counter for the reference period (atmVcPMQoSPeriodRef)
defined in accordance with I.356 , in %.
The value will be multipuled by 100.

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.4

atmVcPMQoSCMR

Cell Miss-insertion Ratio counter for the reference period (atmVcPMQoSPeriodRef)
defined in accordance with I.356 , cells/sec .

SNMPv2-SMIGauge32

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.1.2.2.7.1.5

atmVcShaperStatTable

table

.1.3.6.1.4.1.164.12.2.1.2.2.8 · 1 row entry · 6 columns

Open in standard view

The ATM VC shaper statistics table.

atmVcShaperStatEntry entry .1.3.6.1.4.1.164.12.2.1.2.2.8.1

An entry in the ATM VC shaper statistics table.

Indexes

No indexes recorded

Column	Syntax	OID
atmVcShaperDiscarded The number of Cells that were discarded in the shaper on that VCC due to buffer overflow. This counter counts till it reaches its MAX value (20 bits) and then rolls over.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.8.1.1`
atmVcShaperOccupation The number of Cells that are currently stored in the buffer. This parameter is limited to 20 bits.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.8.1.2`
atmVcShaperMaxOccupation The Maximum number of Cells that were stored in the buffer, since this VC was activated. This parameter is limited to 20 bits.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.1.2.2.8.1.3`
atmVcShaperLevel The occupation of the buffer according to a predefined threshold. empty - buffer is Empty full - buffer is Full below - buffer is Below the threshold above - buffer is Above the threshold. This is also the trigger to …	Enumeration	`.1.3.6.1.4.1.164.12.2.1.2.2.8.1.4`
atmVcShaperEpdDropped The number of Cells that were dropped in the shaper on that VCC due to EPD\PPD mechanism in the last second. This parameter is limited to 24 bits. Applicable for a EPD/PPD VC only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.8.1.5`
atmVcShaperTotalEpdDropped The Total number of Cells that were dropped in the shaper on that VPC due to EPD\PPD mechanism in the last 15 minutes. This counter automatically reset itself every 15 minutes. Applicable for a EPD/PPD VC only.	SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.2.1.2.2.8.1.6`

atmIntervalDateTable

table

.1.3.6.1.4.1.164.12.2.1.3 · 1 row entry · 3 columns

Open in standard view

The agent will keep in this group the date & time
corresponding to each interval.

atmIntervalDateEntry entry .1.3.6.1.4.1.164.12.2.1.3.1

The date & time for the given interval.

Indexes

No indexes recorded

Column Syntax OID

atmIntervalDateInterval

The interval number defining this entry.

Integer32

.1.3.6.1.4.1.164.12.2.1.3.1.1

atmIntervalDateDate

The date corresponding to this interval.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.12.2.1.3.1.2

atmIntervalDateTime

The time corresponding to this interval.

SNMPv2-TCDisplayString

Enumerated Values:

1	none
2	police
3	monitor
4	shaping
5	policingAndShaping

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.164.12.2.1.3.1.3

atmGenSysSelfTestTable

table

.1.3.6.1.4.1.164.12.2.2.1.1 · 1 row entry · 2 columns

Open in standard view

A table containing the results of the initial testing of the device.

atmGenSysSelfTestEntry entry .1.3.6.1.4.1.164.12.2.2.1.1.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
atmGenSysSelfTestIndex A running index for the table.	SNMPv2-SMIInteger32 Constraints: `range: 0-20` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.2.2.1.1.1.1`
atmGenSysSelfTestResult The results of the initial testing of the device.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.12.2.2.1.1.1.2`

atmGenSysLogTable

table

.1.3.6.1.4.1.164.12.2.2.1.3 · 1 row entry · 2 columns

Open in standard view

A copy of the log buffer.

atmGenSysLogEntry entry .1.3.6.1.4.1.164.12.2.2.1.3.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

atmGenSysLogIndex

The index of the log buffer.

Integer32

Enumerated Values:

1	intermediate
2	segmentTermination
3	endToEndTermination

.1.3.6.1.4.1.164.12.2.2.1.3.1.1

atmGenSysLogMessage

The log buffer entry message text.

OctetString

Enumerated Values:

1	initial
4	source
5	sink
8	both
9	timeout
10	denied
11	conflict
12	manual

.1.3.6.1.4.1.164.12.2.2.1.3.1.2

atmGenSysCxRefTable

table

.1.3.6.1.4.1.164.12.2.2.1.5 · 1 row entry · 2 columns

Open in standard view

A Cross Reference table. The table maintains 
an index of an object which is also the table index, 
and a counter that indicates how many times this 
object was referenced.
When using this table for more than one referenced table,
			which uses the same range of indexes, then the index 
			should be shifted by a unique offset per table.
             
In ACE2002 this table is used for TD and for FR Desc. Thus,
the index for FR Descriptor is: FR Descriptor index + offset. 
The offset is described in the ACE2002 NMS SRS.

atmGenSysCxRefEntry entry .1.3.6.1.4.1.164.12.2.2.1.5.1

The entries will be added by the agent upon
an entry addition in the referenced tables
(TD table, FR Descriptor etc.)

Indexes

No indexes recorded

Column Syntax OID

atmGenSysCxRefIndex

The index specifies an entry in the table of the object.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.2.2.1.5.1.1

atmGenSysCxRefCounter

The counter counts the number of references
that have been made to the object .

SNMPv2-SMIGauge32

Enumerated Values:

1	notApplicable
2	downStream
3	upStream

Textual Convention: SNMPv2-SMIGauge32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.164.12.2.2.1.5.1.2

atmNteManagerTable

table

.1.3.6.1.4.1.164.12.3.1.1.1 · 1 row entry · 11 columns

Open in standard view

The Manager Table includes all the NMSs that
receive traps from this agent. A single manager
can receive traps on more than one PVC. The PVCs 
must be from the four allowed. The agent will set
implicitly the correct ifIndex, VPI, VCI values to
all relevant entries in the table when the user changes
them for one of the PVCs.

atmNteManagerEntry entry .1.3.6.1.4.1.164.12.3.1.1.1.1

A single manager and the PVC for receiving traps.

Indexes

IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column Syntax OID

atmNteManagerIP

The IP address of the NMS.

SNMPv2-SMIIpAddress

Enumerated Values:

1	none
2	police
3	monitor
4	shaping
5	policingAndShaping
255	notApplicable

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.1.1.1

atmNteManagerPvc

A PVC index. The range is 1..8. There are four PVCs
on the User Port and four PVCs on the Network Port.
The default VPI, VCI values are specified below.

SNMPv2-SMIInteger32

Enumerated Values:

2	up
3	down
4	source
5	sink
6	listenToActivationCells
7	originateActivationCells

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.2

atmNteManagerIfIndex

The ATM interface index of the management port.

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	up
3	down
4	llid
5	segment
6	endToEnd
7	segmentLlid
8	endToEndLlid

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.3

atmNteManagerVpi

The VPI of the management VCL. Default: 0.

SNMPv2-SMIInteger32r/w

Constraints:
range: 2-20

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.4

atmNteManagerVci

The VCI of the management VCL. Defaults: 32,33,34,35.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.5

atmNteManagerTrapMask

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	both
4	source
5	sink

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.6

atmNteManagerRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.1.1.1.1.7

atmNteManagerNextHop

This parameter is relevant to Ethernet out of band
host only (PVC=10).
The Next Hop IP address of the entry route.

SNMPv2-SMIIpAddressr/w

Enumerated Values:

1	intermediate
2	segmentTermination
3	endToEndTermination

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.1.1.8

atmNteManagerVlanSupport

VLAN support (Tagging).
no - No support to VLAN.
yes - 4 VLAN bytes will be added to the frame.

Enumerationr/w

Enumerated Values:

1	manual
2	activator
3	listener

.1.3.6.1.4.1.164.12.3.1.1.1.1.9

atmNteManagerVlanIdentifier

VLAN ID. Range is 0..4095.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	initial
2	up
3	down
4	source
5	sink
8	both
9	timeout
10	denied
11	conflict
12	manual

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.10

atmNteManagerVlanFramePriority

VLAN Frame priority.Range is 0..7.

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	off
3	on

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.1.1.11

atmNteConfOamIfTable

table

.1.3.6.1.4.1.164.12.3.1.1.9.4 · 1 row entry · 1 columns

Open in standard view

OAM support per ATM interface.

atmNteConfOamIfEntry entry .1.3.6.1.4.1.164.12.3.1.1.9.4.1

Indexes

No indexes recorded

Column Syntax OID

atmNteConfOamIfAisRdi

This parameter controls the generation of F4/F5
AIS and RDI due to lower order problems such as physical
layer problems.

For AIS: Defines if F4/F5 AIS cell is transmitted due
to problems such as physic…

Enumerationr/w

Enumerated Values:

1	notApplicable
2	downStream
3	upStream

.1.3.6.1.4.1.164.12.3.1.1.9.4.1.1

atmNteHostIfTable

table

.1.3.6.1.4.1.164.12.3.1.1.11 · 1 row entry · 9 columns

Open in standard view

Host IP interface table.

atmNteHostIfEntry entry .1.3.6.1.4.1.164.12.3.1.1.11.1

Indexes

IF-MIBifIndex atmNteVpAlarmVpi

Column Syntax OID

atmNteHostPvcIndex

A PVC index. The range is 1..8. There are four PVCs
on the User Port and four PVCs on the Network Port.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.1

atmNteHostIP

The host interface IP address.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.11.1.2

atmNteHostMask

The host interface subnet mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.164.12.3.1.1.11.1.3

atmNteHostAtmIfIndex

ATM interface index. Will be 1
for user port, and 2 for network port.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.4

atmNteHostVpi

VPI of the PVC connected to that host interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.5

atmNteHostVci

VCI of the PVC connected to that host interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.6

atmNteHostRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.1.1.11.1.7

atmNteHostRdnVpi

The VPI of the redundant management VCL.
This parameter is applicable only if atmNteRdnManagement=enable(3).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.8

atmNteHostRdnVci

The VCI of the redundant management VCL.
This parameter is applicable only if atmNteRdnManagement=enable(3).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.1.1.11.1.9

atmNteOamTable

table

.1.3.6.1.4.1.164.12.3.1.1.26 · 1 row entry · 4 columns

Open in standard view

This table is a static table, which is created by agent once
upon initialization. The created entries are actually, only the
supported OAM features. 
This table enables addition of new features by adding new entries
rather than adding scalar parameters.
An OAM feature is defined by the indexes values combination.

atmNteOamEntry entry .1.3.6.1.4.1.164.12.3.1.1.26.1

An entry in the OAM table.
Each entry in this table will indicate a special OAM.

Indexes

No indexes recorded

Column Syntax OID

atmNteOamMode

The OAM cell path.
endToEnd(1) - the entire path.

Enumeration

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

.1.3.6.1.4.1.164.12.3.1.1.26.1.1

atmNteOamCellType

This object indicates a unique Indication Signal.
aisAndRdi(1) - Alarm Indication Signal (AIS) and
Remote Defect Indication (RDI) cell.
loopback(2) - Loopback cell.

Enumeration

.1.3.6.1.4.1.164.12.3.1.1.26.1.2

atmNteOamLevel

The level of the OAM cell.
-- f4 (2) - VP level,
f5 (3) - VC level.

Enumeration

.1.3.6.1.4.1.164.12.3.1.1.26.1.3

atmNteOamEnable

This parameter determines if the specified OAM cells
will be enabled.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.1.1.26.1.4

atmNteIdTable

table

.1.3.6.1.4.1.164.12.3.1.2.1 · 1 row entry · 4 columns

Open in standard view

The IDs of the cards and of the system.

atmNteIdEntry entry .1.3.6.1.4.1.164.12.3.1.2.1.1

Indexes

No indexes recorded

Column	Syntax	OID
atmNteIdIndex An Index of the Unit ID table. The following units have IDs in this table: 1 - System 2 - ATM Board 3 - User Card 4 - Trunk 1 card 5 - Trunk 2 card 6 - Shaper 7 - Clock Unit 8 - Slot 1 card 9 - Slot 2 card 10 - S…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.1.2.1.1.1`
atmNteUnitId The ID of the Unit. For index = 6, the id will describe the validity of a shaper in the system: 0 - Shaper Not exist 1 - Shaper exist. For index = 7, the id will describe the validity of a…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.1.2.1.1.2`
atmNteUnitVersion Hardware and Software version of the module.	SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.164.12.3.1.2.1.1.3`
atmNteCardType The card type.	Enumeration	`.1.3.6.1.4.1.164.12.3.1.2.1.1.4`

atmSysIntervalTable

table

.1.3.6.1.4.1.164.12.3.1.2.8.2 · 1 row entry · 2 columns

Open in standard view

The system level Interval table.

atmSysIntervalEntry entry .1.3.6.1.4.1.164.12.3.1.2.8.2.1

Indexes

No indexes recorded

Column	Syntax	OID
atmSysIntervalNumber A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).	Integer32	`.1.3.6.1.4.1.164.12.3.1.2.8.2.1.1`
atmSysIntervalCdc Seconds in which cells dropped was occured in 15 minutes interval.	SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.164.12.3.1.2.8.2.1.2`

atmNteConfIfTable

table

.1.3.6.1.4.1.164.12.3.2.1.1 · 1 row entry · 9 columns

Open in standard view

The Physical interface configuration table.

atmNteConfIfEntry entry .1.3.6.1.4.1.164.12.3.2.1.1.1

An entry in the Physical interface configuration table.
The ifIndex is of the lowest physical layer.

Indexes

No indexes recorded

Column Syntax OID

atmConfIfTransmitClk

The transmit clock of the port.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.1.1.1

atmConfIfLoopback

Interface Loopback.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.1.1.2

atmConfIfFrameType

The frame type. Valid values for a 155M interface:
sonet(2), sdh(3). Valid values for a T3 interface:
direct(4), plcpInternal(5), plcpExternal(6),
directNoScrmbling(10), plcpInternalNoScrmbling(11),
plcpExternalNoScrmb…

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.1.1.3

atmConfIfCardType deprecated

The card type.

Enumeration

.1.3.6.1.4.1.164.12.3.2.1.1.1.4

atmConfAtmIfVpiVciLimit

The limit on the sum of the VPI+VCI bits for this interface.

Enumeration

.1.3.6.1.4.1.164.12.3.2.1.1.1.5

atmConfIfHwFeatures

HW features command.

Enumerationr/w

Constraints:
range: 1-96

.1.3.6.1.4.1.164.12.3.2.1.1.1.6

atmConfIfOutputRate

This parameter indicates the output rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
which are described in the NMS SRS.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.1.1.7

atmConfIfInputRate

This parameter indicates the input rate in cells/sec, which is
supported per port. Successfully setting this parameter
is dependent on all other ports values calculations,
which are described in the NMS SRS.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.1.1.8

atmConfAlarmForwarding

Enables Path AIS Alarm forwarding upon a failure detection. The
following might be considered as a failure: LOS, LOF, LOC, SLM,
LOP, Path AIS and Line AIS.

disable(2) - will not forward an alarm upon a…

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.1.1.9

atmNteAlarmIfTable

table

.1.3.6.1.4.1.164.12.3.2.1.2 · 1 row entry · 11 columns

Open in standard view

The interface Alarm table.

atmNteAlarmIfEntry entry .1.3.6.1.4.1.164.12.3.2.1.2.1

An entry in the interface Alarm table.

Indexes

No indexes recorded

Column Syntax OID

atmInterfaceActiveAlarms

A Bit String of the active alarms on this interface.
An up bit (1) means there is an active alarm of this
type. A down bit (0) means there is no such alarm.
The meaning of the bits is as follows:
1 - LOS
2 - LOF
3 - Lin…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.1

atmThresholdSectionBIP

When Section BIPs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.2

atmThresholdLineBIP

When Line BIPs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.3

atmThresholdLineFEBE

When Line FEBEs are greater than this threshold,
an active alarm is raised. N/A for ds3/e3 interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.4

atmThresholdPathBIP

When Path BIPs are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.5

atmThresholdPathFEBE

When Path FEBEs are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.6

atmThresholdErroredCells

When Errored Cells are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-96

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.7

atmThresholdLostCells

When Lost Cells are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	noActive
2	inProgress
3	failed
4	endSuccessfully

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.8

atmThresholdMisinsertedCells

When Misinserted Cells are greater than this threshold,
an active alarm is raised.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.9

atmInterfaceAlarmStatus

The variable is on(3) when there is any active alarm
on this interface.

Enumeration

.1.3.6.1.4.1.164.12.3.2.1.2.1.10

atmInterfaceMaskAlarms

A Bit String of alarms mask on this interface.
An up bit (1) means that the respective alarm is masked.
A down bit (0) means no mask.
The mask is supported for the following alarms:
1 - LOS

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.2.1.11

atmNteConfVpTable

table

.1.3.6.1.4.1.164.12.3.2.1.3 · 1 row entry · 13 columns

Open in standard view

The ATM VP configuration table.
The table is an extension to the atmVplTable of
RFC-1695.

atmNteConfVpEntry entry .1.3.6.1.4.1.164.12.3.2.1.3.1

An entry in the ATM VP configuration table.
ifIndex of the ATM layer.

Indexes

No indexes recorded

Column Syntax OID

atmConfVpPolicing

Policing method desired for this VPL.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.1

atmConfVpCCAdminStatus

up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC.
source(4) - Activate OAM CC(Continuity Check) of local agent
( start sending Oam cells to the remote side ).
sink(5) - Activat…

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.2

atmConfVpLoopbackAdminStatus

up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells.

For ace2002:
up(2) - Transmitting LB cells with llid all ones
(i.e. FFFF..FF)
down(3) - Not transmitting LB cells.…

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.3

atmConfVpLoopbackSinkAddress

Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used.

OctetStringr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.4

atmConfVpCongestionControl

Each bit indicates a selection of one option
as the following description. All combinations
are possible and legal.
The codes are:
1 - EPD
2 - CLP
4 - EFCI

OctetStringr/w

Enumerated Values:

2	up
3	down
4	listenToActivationCells
5	originateActivationCells

.1.3.6.1.4.1.164.12.3.2.1.3.1.5

atmConfVpCCDirection

both(2) - Agent send OAM CC cells and check received OAM CC cells
source(4)- Agent send OAM CC cells.
sink(5) - Agent checks received OAM CC cells.

Enumerationr/w

Enumerated Values:

2	source
3	destination
4	bidirectional

.1.3.6.1.4.1.164.12.3.2.1.3.1.6

atmConfVpCreationTime

A date-time in which the VP was created.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.164.12.3.2.1.3.1.7

atmConfVpOamSupport

OAM support mode, which determines the device location
in a segment wise.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.8

atmConfVpCCOperStatus

initial(1) - The CC activation process is not started.
source(4) - Agent sends OAM CC cells.
sink(5) - Agent checks received OAM CC cells.
both (8) - OAM CC of local and remote agents activation.
timeout (9) - Timeo…

Enumeration

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

.1.3.6.1.4.1.164.12.3.2.1.3.1.9

atmConfVpLoopbackTraffic

This parameter has both command and status meanings:
off(2) - Set to 'Off' will Stop traffic loop. Getting this
value means that the loop is not running.
on (3) - Set to 'On' will start traffic loop. Getting
…

Enumerationr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

.1.3.6.1.4.1.164.12.3.2.1.3.1.10

atmConfVpLoopbackFailureInd

This object allows user to define the Indication that will be created upon
a LB cell failure.
disabled(2) - no indication will be created.
segmentAis(3) - will cause Tx of a segment AIS.
segmentRdi(4) - will cause Tx o…

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.11

atmConfVpLoopbackFailureThreshold

The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd.
Range: 1..16. Default: 1.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.3.1.12

atmConfVpOamDirection

The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream.
upStream(3) - The OAM cell will be inserted in upStream.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.3.1.13

atmNteConfVcTable

table

.1.3.6.1.4.1.164.12.3.2.1.4 · 1 row entry · 14 columns

Open in standard view

The ATM VC configuration table.
The table is an extension to the atmVclTable of
RFC-1695.

atmNteConfVcEntry entry .1.3.6.1.4.1.164.12.3.2.1.4.1

An entry in the ATM VC configuration table.
ifIndex of the ATM layer.

Indexes

No indexes recorded

Column Syntax OID

atmConfVcPolicing

Policing method desired for this VCL.

Enumerationr/w

Enumerated Values:

2	up
3	down
4	listenToActivationCells
5	originateActivationCells

.1.3.6.1.4.1.164.12.3.2.1.4.1.1

atmConfVcCCAdminStatus

up(2) - Activate Continuity Check (CC).
down(3) - Deactivate CC.
source(4) - Activate OAM CC(Continuity Check) of local agent
( start sending Oam cells to the remote side ).
sink(5) - Activat…

Enumerationr/w

Enumerated Values:

2	source
3	destination
4	bidirectional

.1.3.6.1.4.1.164.12.3.2.1.4.1.2

atmConfVcLoopbackAdminStatus

up(2) - Start loopback OAM cells.
down(3) - Stop sending loopback OAM cells.

For ace2002:
up(2) - Transmitting LB cells with llid all ones
(i.e. FFFF..FF)
down(3) - Not transmitting LB cells.…

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.4.1.3

atmConfVcLoopbackSinkAddress

Destination address.
For ace101: 2 bytes are used.
For ace2002: 16 bytes are used.

OctetStringr/w

.1.3.6.1.4.1.164.12.3.2.1.4.1.4

atmConfVcCongestionControl

Each bit indicates a selection of one option
as the following description. All combinations
are possible and legal.
The codes are:
1 - EPD
2 - CLP
4 - EFCI.
For ace2002:
1 - Packet Discard.

OctetStringr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

.1.3.6.1.4.1.164.12.3.2.1.4.1.5

atmConfVcCCDirection

both(2) - Agent send OAM CC cells and check receivev OAM CC cells
source(4)- Agent send OAM CC cells.
sink(5) - Agent checks received OAM CC cells.

Enumerationr/w

Enumerated Values:

1	off
2	fwd
3	fwdAndBwdReport

.1.3.6.1.4.1.164.12.3.2.1.4.1.6

atmConfVcCreationTime

A date-time in which the VC was created.

SNMPv2-TCDateAndTime

Textual Convention: SNMPv2-TCDateAndTime OctetString

Type Constraints:
range: 8
range: 11

.1.3.6.1.4.1.164.12.3.2.1.4.1.7

atmConfVcOamSupport

OAM support mode, which determines the device location
in a segment wise.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.4.1.8

atmConfVcCCActivationCtrl

manual(1) - CC Activation process is disable
activator(2) - ACE-101 initiate CC Activation process
listener(3) - ACE-101 wait to CC Activation request from remote side.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.164.12.3.2.1.4.1.9

atmConfVcCCOperStatus

initial (1) - The CC activation process is not started.
up (2) - Continuity Check (CC) activated.
down (3) - CC deactivated.
source (4) - OAM CC(Continuity Check) of local agent activated.
sink (5) - OAM CC of remo…

Enumeration

Enumerated Values:

1	link1
2	link2
3	link3
4	link4
5	internal
6	external
7	automatic

.1.3.6.1.4.1.164.12.3.2.1.4.1.10

atmConfVcLoopbackTraffic

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.4.1.11

atmConfVcLoopbackFailureInd

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.1.4.1.12

atmConfVcLoopbackFailureThreshold

The number of the LB failures before starting transmission of the
Indication defined by atmConfVcLoopbackFailureInd.
Range: 1..16. Default: 1.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	ver10
2	ver11

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.4.1.13

atmConfVcOamDirection

The direction of OAM cell insertion.
downStream(2) - The OAM cell will be inserted in downStream.
upStream(3) - The OAM cell will be inserted in upStream.

Enumerationr/w

Enumerated Values:

1	link1
2	link2
3	link3
4	link4
5	internal
6	external
7	automatic
255	notApplicable

.1.3.6.1.4.1.164.12.3.2.1.4.1.14

atmNteAlarmVpTable

table

.1.3.6.1.4.1.164.12.3.2.1.5 · 1 row entry · 2 columns

Open in standard view

The ATM VP Alarm table.

atmNteAlarmVpEntry entry .1.3.6.1.4.1.164.12.3.2.1.5.1

An entry in the ATM VP Alarm table.
ifIndex of the ATM layer.

Indexes

No indexes recorded

Column Syntax OID

atmNteVpAlarmVpi

The VPI on which there is an active alarm.

SNMPv2-SMIInteger32

Enumerated Values:

1	main
2	sub

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.5.1.1

atmNteVpActiveAlarms

A Bit String of the active alarms on this VP.
An up bit (1) means there is an active alarm of this
type. A down bit (0) means there is no such alarm.
The meaning of the bits is as follows:
1 - VP AIS
2 - VP Loss Of Cont…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.5.1.2

atmNteAlarmVcTable

table

.1.3.6.1.4.1.164.12.3.2.1.6 · 1 row entry · 3 columns

Open in standard view

The ATM VC Alarm table.

atmNteAlarmVcEntry entry .1.3.6.1.4.1.164.12.3.2.1.6.1

An entry in the ATM VC Alarm table.
ifIndex of the ATM layer.

Indexes

atmLayer2GroupIdx IF-MIBifIndex ATM-MIBatmVclVpi ATM-MIBatmVclVci

Column Syntax OID

atmNteVcAlarmVpi

The VPI of the VC on which there is an active alarm.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.6.1.1

atmNteVcAlarmVci

The VCI of the VC on which there is an active alarm.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.6.1.2

atmNteVcActiveAlarms

A Bit String of the active alarms on this VC.
An up bit (1) means there is an active alarm of this
type. A down bit (0) means there is no such alarm.
The meaning of the bits is as follows:
1 - VC AIS
2 - VC Loss Of Cont…

SNMPv2-SMIInteger32

Enumerated Values:

1	main
2	sub

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.1.6.1.3

atmLoopbackVpTable

table

.1.3.6.1.4.1.164.12.3.2.2.1 · 1 row entry · 8 columns

Open in standard view

This table contains parameters for an OAM VP loopback test.

atmLoopbackVpEntry entry .1.3.6.1.4.1.164.12.3.2.2.1.1

An entry in table atmLoopbackVpTable.

Indexes

No indexes recorded

Column	Syntax	OID
atmLoopbackVpIfIndex The interface index of the ATM layer.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.1`
atmLoopbackVpVpi The VPI of the OAM VPL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.2`
atmLoopbackVpOperStatus -noActive(1) means that the loopback test has not been activated for this VP. -inProgress(2) means that the test has been activated and there is currently no problem. -failed(3) means there was problem during the test o…	Enumeration	`.1.3.6.1.4.1.164.12.3.2.2.1.1.3`
atmLoopbackVpCDV Cell Delay Variation for this sampling.	SNMPv2-SMIInteger32 Constraints: `range: 1-8` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.4`
atmLoopbackVpAverageDelay Average delay without including lost cells.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.5`
atmLoopbackVpMaxDelay Maximum delay without including lost cells.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.6`
atmLoopbackVpMinDelay Minimum delay.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.7`
atmLoopbackVpErrSessions Errored Sessions. Will be updated once in 5 seconds.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.1.1.8`

atmLoopbackVcTable

table

.1.3.6.1.4.1.164.12.3.2.2.2 · 1 row entry · 9 columns

Open in standard view

This table contains parameters for an OAM VC loopback test.

atmLoopbackVcEntry entry .1.3.6.1.4.1.164.12.3.2.2.2.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

atmLoopbackVcIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.1

atmLoopbackVcVpi

The VPI of the OAM VCL.

SNMPv2-SMIInteger32

Enumerated Values:

1	master
2	fallback
3	internal
4	ml

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.2

atmLoopbackVcVci

The VCI of the OAM VCL.

SNMPv2-SMIInteger32

Enumerated Values:

1	reset
2	sendNetworkTab
3	deleteNetworkTab
4	sendRoutingTab
5	deleteRoutinTab
6	sendLanTab
7	deleteLanTab
8	deleteArpTab
9	sendArpTab
10	deleteRouteTab
11	sendRouteTab
12	deactivateAllMasks
13	saveAllActiveMasks
14	loadAndActivateAllMasksFromNVRAM
15	clearAllMasksFromNVRAM
16	defaultConfig
17	resetNVRAM
18	clearIPNVRAM
255	noOp

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.3

atmLoopbackVcOperStatus

-noActive(1) means that the loopback test has not been activated for this VP.
-inProgress(2) means that the test has been activated and there is currently no problem.
-failed(3) means there was problem during the test o…

Enumeration

.1.3.6.1.4.1.164.12.3.2.2.2.1.4

atmLoopbackVcCDV

Cell Delay Variation for this sampling.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.5

atmLoopbackVcAverageDelay

Average delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.6

atmLoopbackVcMaxDelay

The maximum delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.7

atmLoopbackVcMinDelay

The minimum delay.

SNMPv2-SMIInteger32

Enumerated Values:

1	forwarding
2	not-forwarding

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.8

atmLoopbackVcErrSessions

Errored Sessions. Will be updated once in 5 seconds.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.2.1.9

atmLoopbackVpIvlTable

table

.1.3.6.1.4.1.164.12.3.2.2.3 · 1 row entry · 9 columns

Open in standard view

This table contains parameters for an OAM VP loopback test,
according interval number.

atmLoopbackVpIvlEntry entry .1.3.6.1.4.1.164.12.3.2.2.3.1

An entry in table.

Indexes

No indexes recorded

Column	Syntax	OID
atmLoopbackVpIvlIfIndex The interface index of the ATM layer.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.1`
atmLoopbackVpIvlVpi The VPI of the OAM VPL.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.2`
atmLoopbackVpIvlIvl The relevant interval number.	Integer32	`.1.3.6.1.4.1.164.12.3.2.2.3.1.3`
atmLoopbackVpIvlOperStatus -noActive(1) means that the loopback test has not been activated for this VP during this interval. -inProgress(2) has no meaning for an ended interval. -failed(3) means there was problem during the test or after having …	Enumeration	`.1.3.6.1.4.1.164.12.3.2.2.3.1.4`
atmLoopbackVpIvlCDV Cell Delay Variation for this interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.5`
atmLoopbackVpIvlAverageDelay Average delay without including lost cells for this interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.6`
atmLoopbackVpIvlMaxDelay The maximum delay without including lost cells for this interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.7`
atmLoopbackVpIvlMinDelay The minimum delay for this interval.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.8`
atmLoopbackVpIvlErrSessions Errored Sessions. Will be updated once in 5 seconds.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.164.12.3.2.2.3.1.9`

atmLoopbackVcIvlTable

table

.1.3.6.1.4.1.164.12.3.2.2.4 · 1 row entry · 10 columns

Open in standard view

This table contains parameters for an OAM VC loopback test.

atmLoopbackVcIvlEntry entry .1.3.6.1.4.1.164.12.3.2.2.4.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

atmLoopbackVcIvlIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.1

atmLoopbackVcIvlVpi

The VPI of the OAM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.2

atmLoopbackVcIvlVci

The VCI of the OAM VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.3

atmLoopbackVcIvlIvl

The relevant interval number.

Integer32

.1.3.6.1.4.1.164.12.3.2.2.4.1.4

atmLoopbackVcIvlOperStatus

-noActive(1) means that the loopback test has not been activated for this VC during this interval.
-inProgress(2) has no meaning per interval.
-failed(3) means there was problem for this test during this interval.
-endS…

Enumeration

Enumerated Values:

1	faulty
2	warning
3	normal
4	minor
5	major
6	event
7	critical

.1.3.6.1.4.1.164.12.3.2.2.4.1.5

atmLoopbackVcIvlCDV

Cell Delay Variation for this interval.

SNMPv2-SMIInteger32

Enumerated Values:

1	notApplicable
2	off
3	on

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.6

atmLoopbackVcIvlAverageDelay

Average delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.7

atmLoopbackVcIvlMaxDelay

The maximum delay without including lost cells.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.8

atmLoopbackVcIvlMinDelay

The minimum delay.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.9

atmLoopbackVcIvlErrSessions

Errored Sessions. Will be updated once in 5 seconds.

SNMPv2-SMIInteger32

Enumerated Values:

1	swDwnLoad
2	configDwnLoad
3	configUpLoad
4	coProcDwnLoad
5	stateUpLoad
6	dwnLoadUserFile
7	upLoadUserFile
8	swDwnLoadAndReset
255	noOp

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.2.4.1.10

atmVpPmTable

table

.1.3.6.1.4.1.164.12.3.2.3.1 · 1 row entry · 8 columns

Open in standard view

This table contains parameters for VP performance monitoring.

atmVpPmEntry entry .1.3.6.1.4.1.164.12.3.2.3.1.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

atmVpPmIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Enumerated Values:

2	noOp
3	connecting
4	transferringData
5	endedTimeOut
6	endedOk
7	error

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.1.1.1

atmVpPmVpi

The VPI of the Performance Monitoring VPL.

SNMPv2-SMIInteger32

Constraints:
range: 2-2

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.1.1.2

atmVpPmAdminStatus

up(2) - Activate PM.
down(3) - Deactivate PM.
listenToActivationCells(4) - .
originateActivationCells(5) - .

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.3.1.1.3

atmVpPmDirection

The direction of PM.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.3.1.1.4

atmVpPmBlockSize

Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096,
8192, 16384, 32768.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.1.1.5

atmVpPmRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Enumerated Values:

2	off
3	on
4	resetConfig

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.2.3.1.1.6

atmVpPmSink

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.3.1.1.7

atmVpPmSource

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

.1.3.6.1.4.1.164.12.3.2.3.1.1.8

atmVcPmTable

table

.1.3.6.1.4.1.164.12.3.2.3.2 · 1 row entry · 9 columns

Open in standard view

This table contains parameters for VC performance monitoring.

atmVcPmEntry entry .1.3.6.1.4.1.164.12.3.2.3.2.1

An entry in table.

Indexes

No indexes recorded

Column Syntax OID

atmVcPmIfIndex

The interface index of the ATM layer.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.1

atmVcPmVpi

The VPI of the Performance Monitoring VCL.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.2

atmVcPmVci

The VCI of the PM VCL.

SNMPv2-SMIInteger32

Enumerated Values:

3	event
4	minor
5	major
6	warning
7	critical

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.3

atmVcPmAdminStatus

up(2) - Activate PM.
down(3) - Deactivate PM.
listenToActivationCells(4) - .
originateActivationCells(5) - .

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.12.3.2.3.2.1.4

atmVcPmDirection

The direction of PM.

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.12.3.2.3.2.1.5

atmVcPmBlockSize

Valid block sizes (in cells): 128, 256, 512, 1024, 2048, 4096,
8192, 16384, 32768.

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	off
3	on

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.6

atmVcPmRowStatus

Creation/Deletion of rows in the table.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.3.2.3.2.1.7

atmVcPmSink

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.164.12.3.2.3.2.1.8

atmVcPmSource

off (1) - Deactivate PM.
fwd (2) - Activate Forward PM only.
fwdAndBwdReport(3) - Activate Forward PM and Backward reporting.

Enumerationr/w

Enumerated Values:

1	notApplicable
2	disconnected
3	connected

.1.3.6.1.4.1.164.12.3.2.3.2.1.9

imaXLinkTable

table

.1.3.6.1.4.1.164.12.5.2 · 1 row entry · 2 columns

Open in standard view

The IMA Link Status and Configuration table.
This table contains additional objects for the link table.

imaXLinkEntry entry .1.3.6.1.4.1.164.12.5.2.1

An entry in the IMA Link table.

Indexes

No indexes recorded

Column Syntax OID

imaLinkDirection

the Link direction.

Enumerationr/w

Enumerated Values:

2	off
3	clear

.1.3.6.1.4.1.164.12.5.2.1.1

imaLinkItcLBClkSrc

Clock source for the current Tx-line.

Enumerationr/w

Enumerated Values:

2	off
3	on

.1.3.6.1.4.1.164.12.5.2.1.2

imaXGroupTable

table

.1.3.6.1.4.1.164.12.5.3 · 1 row entry · 2 columns

Open in standard view

The IMA group Status and Configuration table.
This table contains additional objects for the Group table.

imaXGroupEntry entry .1.3.6.1.4.1.164.12.5.3.1

An entry in the IMA Group table.

Indexes

No indexes recorded

Column Syntax OID

imaGroupVersion

IMA Version.

Enumerationr/w

Enumerated Values:

2	off
3	clear

.1.3.6.1.4.1.164.12.5.3.1.1

imaGroupCtcTxClkSrc

The source of the transmited, common, Clock Source.
Applicable if imaGroupNeTxClkMode=ctc(1).
Automatic - Dynamic source, taken from the currently reference link.
Internal - taken from the Internal clock on card.
Link…

Enumerationr/w

.1.3.6.1.4.1.164.12.5.3.1.2

atmLayer2XVclTable

table

.1.3.6.1.4.1.164.12.7.1 · 1 row entry · 2 columns

Open in standard view

This table is an extension of VCL table, which is created  
for each LAN VCC.

atmLayer2XVclEntry entry .1.3.6.1.4.1.164.12.7.1.1

Conceptual row in atmVclTable.
This table augments the RFC2515 VCL table.

Indexes

No indexes recorded

Column Syntax OID

atmLayer2XVclConnMode

Each valid LAN VCC is either Main or Sub.
This parameter is configured only once on creation of a LAN VCC.
It can not be changed after creation. In order to change the Mode,
user should delete the connection and creat…

Enumerationr/w

Enumerated Values:

2	trunk1
3	trunk2

.1.3.6.1.4.1.164.12.7.1.1.1

atmLayer2XVclGroupIdx

The group identifier.
A VCC Group identifier = 0 if the VCC was not associated with a
group yet.
This value is updated according to the group identifier set by
atmLayer2GroupTable.

SNMPv2-SMIInteger32

Enumerated Values:

1	off
2	forceSwitch

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.1.1.2

atmLayer2GroupTable

table

.1.3.6.1.4.1.164.12.7.2 · 1 row entry · 5 columns

Open in standard view

This table contains groups and their members.
A group is a bundle of VCCs, which acts as different queues.
Main and Sub VCCs should have the same ATM slot and port,
and the same LAN slot and port.
Each group contains: 1 to <number of priorities> VCCs.

atmLayer2GroupEntry entry .1.3.6.1.4.1.164.12.7.2.1

Conceptual row in atmLayer2GroupTable.
The indexes: ifIndex, atmVclVpi and atmVclVci indicate
the Network ATM End-Point.
Upon a group creation, one Main VCC must be added first.
After the group was created, Sub VCCs ma…

Indexes

No indexes recorded

Column Syntax OID

atmLayer2GroupIdx

The group identifier.
0 is not a valid index.

SNMPv2-SMIInteger32

Enumerated Values:

1	none
2	user
3	network
4	both

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.2.1.1

atmLayer2GroupRowStatus

Creation/Deletion of rows in the table, and indication of the
entry's status.

SNMPv2-TCRowStatusr/w

Enumerated Values:

1	off
2	on

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.164.12.7.2.1.2

atmLayer2GroupConnMode

Each valid LAN VCC is either Main or Sub as configured in
atmLayer2XVclTable.

Enumeration

Constraints:
range: 2-20

.1.3.6.1.4.1.164.12.7.2.1.3

atmLayer2GroupConnPriority

This parameter is configured by atmLayer2PriorityRx from
atmLayer2PriorityTable.
Each bit in the Octet represents a specific priority as follows:

MSB 7 6 5 4 …

OctetString

Enumerated Values:

1	disable
2	enable

.1.3.6.1.4.1.164.12.7.2.1.4

atmLayer2GroupName

Group name. Configured by the user.
The name is unique per system.
For atmLayer2GroupIdx=0, the name will be null.

OctetStringr/w

Enumerated Values:

1	normal
2	group
3	aggregate
4	vpInbandMng

.1.3.6.1.4.1.164.12.7.2.1.5

atmLayer2PriorityTable

table

.1.3.6.1.4.1.164.12.7.3 · 1 row entry · 5 columns

Open in standard view

This table maps all priorities inside a group.
Several priorities might be mapped to the same VCC. 
Upon priority change, the agent will update the VCCs of the 
changed priority in this table, and will update	-
atmLayer2GroupConnPriority parameter of both former and new owners 
of the changed priority.
Changing a VCC value is actually a change of three parameters
simultaneously: atmLayer2PriorityIfIndex, atmLayer2PriorityVclVpi
and atmLayer2PriorityVclVci. Otherwise, the set will be rejected,
since there might be that such VCC doesn't exist in the specific
group.

atmLayer2PriorityEntry entry .1.3.6.1.4.1.164.12.7.3.1

Conceptual row in atmLayer2PriorityTable.
Each entry is a Network ATM End-Point per priority.
Upon a group creation, all priorities are mapped to the Main VCC.
Number of entries per group is according to the number of …

Indexes

No indexes recorded

Column Syntax OID

atmLayer2PriorityGroupIdx

The group identifier.

SNMPv2-SMIInteger32

Constraints:
range: 1-1

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.3.1.1

atmLayer2PriorityRx

The priority values.
The used values are 0-7, but since this value is part of the index
of the table, and in order to avoid '0' as an index, the index syntax
is 1..8, but the real value is atmLayer2PriorityRx-1:
0 …

Integer32

Constraints:
range: 8-8

.1.3.6.1.4.1.164.12.7.3.1.2

atmLayer2PriorityIfIndex

ATM ifIndex of the network End-Point.

IF-MIBInterfaceIndexr/w

Enumerated Values:

1	disable
2	offline
3	online

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.164.12.7.3.1.3

atmLayer2PriorityVclVpi

Vpi of the network End-Point.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	notApplicable
2	user
3	network

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.3.1.4

atmLayer2PriorityVclVci

Vci of the network End-Point.

SNMPv2-SMIInteger32r/w

Enumerated Values:

1	notApplicable
2	max1024
3	max2048

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.7.3.1.5

frAtmIwfXConnectionTable

table

.1.3.6.1.4.1.164.12.8.1 · 1 row entry · 2 columns

Open in standard view

This table is an extension of frAtmIwfXConnectionTable from
RFC2955.

frAtmIwfXConnectionEntry entry .1.3.6.1.4.1.164.12.8.1.1

Conceptual row in frAtmIwfXConnectionTable.
This table augments the RFC2955.

Indexes

No indexes recorded

Column Syntax OID

frAtmIwfXConnMode

FR IWF Mode.
service - Service InterWorking (FRF.8),
network - Network InterWorking (FRF.5).

Enumerationr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.164.12.8.1.1.1

frAtmIwfXConnSscsDlci

This parameter is relevant for
frAtmIwfXConnMode=network (FRF.5) only.
This parameter allow configuration of the
FR SSCS DLCI that is transferred to the
remote FR unit.

SNMPv2-SMIInteger32r/w

Enumerated Values:

2	disabled
3	enabled

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.164.12.8.1.1.2