radBridgeMaskOper
ACE202-MIB ·
.1.3.6.1.4.1.164.4.1.3.1.20
Object
column
r/w
Enumeration
The type of action to be taken if the frame meets the conditions of the mask. noOp = disabled (mask remains on list, but is not active) delete = mask is removed from the list.
Context
- MIB
- ACE202-MIB
- OID
.1.3.6.1.4.1.164.4.1.3.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- radBridgeMaskEntry
- Table
- radBridgeMaskTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | false |
2 | true |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radBridgeMaskType Defines the type of mask entry. | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.1 |
| radBridgeMaskPat2 Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern. | column | OctetString | .1.3.6.1.4.1.164.4.1.3.1.10 |
| radBridgeMaskActiveBit2 Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat2 field. | column | OctetString | .1.3.6.1.4.1.164.4.1.3.1.11 |
| radBridgeMaskFrom2 Offset base of radBridgeMaskPat2 within the frame.
Net can be in some cases the data start point. | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.12 |
| radBridgeMaskOffset2 Specifies the radBridgeMaskPat2 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm2.The mask offset is an even
decimal number in the range of 0 to 1… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.1.3.1.13 |
| radBridgeMaskCond2 Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
radBridgeMaskOffset2 the packet contains data that… | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.14 |
| radBridgeMaskPat3 Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern. | column | OctetString | .1.3.6.1.4.1.164.4.1.3.1.15 |
| radBridgeMaskActiveBit3 Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat3 field. | column | OctetString | .1.3.6.1.4.1.164.4.1.3.1.16 |
| radBridgeMaskFrom3 Offset base of radBridgeMaskPat3 within the frame.
Net can be in some cases the data start point. | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.17 |
| radBridgeMaskOffset3 Specifies the radBridgeMaskPat3 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm3. The mask offset is an even
decimal number in the range of 0 to … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.1.3.1.18 |
| radBridgeMaskCond3 Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
radBridgeMaskOffset3 the packet contains data that… | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.19 |
| radBridgeMaskIfIndex Specifies the if Index of the interface to which the mask is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.1.3.1.2 |
| radBridgeMaskNum The Mask entry number, defined by its line number in the mask
table. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.1.3.1.3 |
| radBridgeMaskDest Specifies the type of destination address carried by the frame
to which the mask will be applied. Unassigned-condition
deactivates the mask entry. | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.4 |
| radBridgeMaskPat1 Describes the mask field which is either a 16 bit binary pattern,
or four digit hexadecimal pattern. | column | OctetString | .1.3.6.1.4.1.164.4.1.3.1.5 |
| radBridgeMaskActiveBit1 Specifies the positions of the wild card characters (*)
in the radBridgeMaskPat1 field. | column | OctetString | .1.3.6.1.4.1.164.4.1.3.1.6 |
| radBridgeMaskFrom1 Offset base of radBridgeMaskPat1 within the frame.
Net can be in some cases the data start point. | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.7 |
| radBridgeMaskOffset1 Specifies the radBridgeMaskPat1 offset within the frame (in bytes) from
the base defined in by radBridgeMaskForm1.The mask offset is an even
decimal number in the range of 0 to 1… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.4.1.3.1.8 |
| radBridgeMaskCond1 Specifies the logical condition of the mask pattern:
true - Condition is valid if at the position specified by
radBridgeMaskOffset1 the packet contains data that… | column | Enumeration | .1.3.6.1.4.1.164.4.1.3.1.9 |