ZYXEL-IES5000-MIB Table View

A table that contains DHCP Relay configuration.

dhcpRelay82Entry row .1.3.6.1.4.1.890.1.5.13.5.1.1.2.1

The entry of DHCP Relay table.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
dhcpRelay82PrimaryServer The IP address of the DHCP Relay primary server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.1
dhcpRelay82SecondaryServer The IP address of the DHCP Relay secondary server. This object is supported by R1.02 and later versions.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.2
dhcpRelay82ActiveServer The current active DHCP Relay server. This object is supported by R1.02 and later versions.	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.3
dhcpRelay82Enable Enable/disable DHCP relay and Option82 function. This object is supported by R1.03 and later versions.	Enumerationr/w Enumerated Values: 1 relayEnable_option82Enable 2 relayDisable_option82Enable 3 disable	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.4
dhcpRelay82Info User specific Option82 information. This object is supported by R1.03 and later versions.	OctetStringr/w Constraints: range: 0-23	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.5
dhcpRelay82RelayMode DHCP relay mode. This object is supported by R1.03 and later versions.	Enumerationr/w Enumerated Values: 1 auto 2 both	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.6
dhcpRelay82RowStatus Row status of the table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.7
dhcpRelay82Suboption2Enable Enable/disable Option 82 sub-option 2. This object is supported by R3.00 and later versions.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.8
dhcpRelay82Suboption2Info User specified information for Option 82 sub-option 2. This object is supported by R3.00 and later versions.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.9
dhcpRelay82Option82Mode	Enumerationr/w Enumerated Values: 1 private 2 tr101 3 tr101PlusVlanInfo	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.10
dhcpRelay82LineCharEnable Enable/disable option 82 sub-option line characteristic information.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.11
dhcpRelay82LineCharMode rate: only bitrate information. full: full line characteristic information.	Enumerationr/w Enumerated Values: 1 rate 2 full	.1.3.6.1.4.1.890.1.5.13.5.1.1.2.1.12

This table includes dhcprelay82 port configuration.

dhcprelay82PortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.1.7.1

An entry in dhcprelay82PortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
option82policy replace: Replace the original relay information when a DHCP message that already contains one. keep: Keep the original relay information when a DHCP message that already contains one. drop: Drop the packet when a DHCP m…	Enumerationr/w Enumerated Values: 0 drop 1 replace 2 keep	.1.3.6.1.4.1.890.1.5.13.5.1.1.7.1.1

A table that contains Radius Server information.

radiusServerEntry row .1.3.6.1.4.1.890.1.5.13.5.1.2.2.1

The entry of Radius Server table.

Indexes

radiusServerIndex

Column	Syntax	OID
radiusServerIndex The identity of the RADIUS server.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.1
radiusServerIp The IP address of the Radius Server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.2
radiusServerPort The UDP port of the Radius Server.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.3
radiusServerSecret The shared secret of the Radius Server.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.890.1.5.13.5.1.2.2.1.4

This table includes 802.1x port configuration.

dot1xPortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.2.3.1

An entry in dot1xPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dot1xPortEnable Enable/disable 802.1x for the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.1
dot1xPortControl The object defines the 802.1x control type for the port.	Enumerationr/w Enumerated Values: 1 auto 2 forceAuth 3 forceUnAuth	.1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.2
dot1xPortReAuthEnable Enable/disable 802.1x re-authentication for the port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.3
dot1xPortReAuthPeriod The object defines the 802.1x re-authentication period for the port.	secondInteger32r/w Constraints: range: 60-65535	.1.3.6.1.4.1.890.1.5.13.5.1.2.3.1.4

This table includes the status of mac filtering for each port.

macFilterPortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.3.1.1

An entry in macFilterPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
macFilterPortEnable Enable/disable MAC filtering for the port.	Enumerationr/w Enumerated Values: 1 enableMacFilter 2 enableMacCount 3 enableOuiFilter 4 disable	.1.3.6.1.4.1.890.1.5.13.5.1.3.1.1.1
macFilterPortMacCount The total number of MAC addresses allowed for the port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.3.1.1.2
macFilterPortFilterMode The mac filter mode (accept or deny) for the port. This object is supported by R1.02 and later versions.	Enumerationr/w Enumerated Values: 1 accept 2 deny	.1.3.6.1.4.1.890.1.5.13.5.1.3.1.1.3

A table that contains the mac filter addresses.

macFilterEntry row .1.3.6.1.4.1.890.1.5.13.5.1.3.5.1

The entry of macFilterTable.

Indexes

RFC1213-MIBifIndex macFilterAddr

Column	Syntax	OID
macFilterAddr The mac address which can pass through or be rejected from the port.	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.890.1.5.13.5.1.3.5.1.1
macFilterRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.3.5.1.2

A table that contains the OUI filter addresses.

ouiFilterEntry row .1.3.6.1.4.1.890.1.5.13.5.1.3.7.1

The entry of ouiFilterTable.

Indexes

RFC1213-MIBifIndex ouiFilterAddr

Column	Syntax	OID
ouiFilterAddr The first three bytes of the mac address which can pass through or be rejected from the port.	OctetString	.1.3.6.1.4.1.890.1.5.13.5.1.3.7.1.1
ouiFilterRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.3.7.1.2

A table that contains the mac filter addresses.

macFilterStatusEntry row .1.3.6.1.4.1.890.1.5.13.5.1.3.9.1

The entry of macFilterStatusTable.

Indexes

RFC1213-MIBifIndex macFilterStatusId

Column	Syntax	OID
macFilterStatusId The index of the entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.3.9.1.1
macFilterStatusAddr The mac address which can pass through or be rejected from the port.	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.890.1.5.13.5.1.3.9.1.2

A table for per-PVC macfilter configuration.

macFilterPerPVCEntry row .1.3.6.1.4.1.890.1.5.13.5.1.3.10.1

The entry of macFilterPerPVCTable.

Indexes

RFC1213-MIBifIndex macFilterPerPVCVpi macFilterPerPVCVci

Column	Syntax	OID
macFilterPerPVCVpi VPI of the pvc.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.1
macFilterPerPVCVci VCI of the pvc.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.2
macFilterPerPVCEnable Enable/disable MAC filtering for the port-vpi/vci	Enumerationr/w Enumerated Values: 1 enablePvcMacFilter 2 enablePvcMacCount 3 disable	.1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.3
macFilterPerPVCMode The mac filter mode (accept or deny) for the port-vpi/vci.	Enumerationr/w Enumerated Values: 1 accept 2 deny	.1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.4
macFilterPerPVCMacCount The total number of MAC addresses allowed for the port-vpi/vci.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.3.10.1.5

A table for per-PVC macfilter configuration.

macFilterPerPVCMACEntry row .1.3.6.1.4.1.890.1.5.13.5.1.3.11.1

The entry of macFilterPerPVCMACTable.

Indexes

RFC1213-MIBifIndex macFilterPerPVCMACVpi macFilterPerPVCMACVci macFilterPerPVCMACAddr

Column	Syntax	OID
macFilterPerPVCMACVpi VPI of the pvc.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.1
macFilterPerPVCMACVci VCI of the pvc.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.2
macFilterPerPVCMACAddr The mac address which can pass through or be rejected from the port-vpi/vci	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.3
macFilterPerPVCMACRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.3.11.1.4

This table includes packet filtering for each port.

pktFilterPortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.4.1.1

An entry in pktFilterPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
pktFilter The packet filter. The semantic for each bit is: BIT 1: accept all BIT 2: accept PPPoE only BIT 3: reject ARP BIT 4: reject DHCP BIT 5: reject EAPOL BIT 6: reject PPPoE BIT 7: reject NetBIOS BIT 8: reject IGMP BIT 9: re…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.4.1.1.1

This table includes per-PVC packet filter configuration.

pktFilterPerPVCEntry row .1.3.6.1.4.1.890.1.5.13.5.1.4.3.1

An entry in pktFilterPerPVCTable.

Indexes

RFC1213-MIBifIndex pktFilterPerPVCVpi pktFilterPerPVCVci

Column	Syntax	OID
pktFilterPerPVCVpi VPI of the pvc.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.890.1.5.13.5.1.4.3.1.1
pktFilterPerPVCVci VCI of the pvc.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.13.5.1.4.3.1.2
pktFilterPerPVCpktFilter The packet filter. The semantic for each bit is: BIT 1: accept all BIT 2: accept PPPoE only BIT 3: reject ARP BIT 4: reject DHCP BIT 5: reject EAPOL BIT 6: reject PPPoE BIT 7: reject NetBIOS BIT 8: reject IGMP BIT 9: re…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.4.3.1.3

This table includes DHCP snooping enable/disable for each port.
This table is supported by R1.02 and later versions.

dhcpSnoopPortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.5.1.1

An entry of dhcpSnoopPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dhcpSnoopEnable Enable/disable DHCP snooping for a port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.5.1.1.1

This table defines DHCP static IP addresses.
This table is supported by R1.03 and later versions.

dhcpStaticEntry row .1.3.6.1.4.1.890.1.5.13.5.1.5.4.1

An entry of dhcpStaticTable.

Indexes

RFC1213-MIBifIndex dhcpStaticIpAddr

Column	Syntax	OID
dhcpStaticIpAddr The IP address which can pass through the port.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.1.5.4.1.1
dhcpStaticRowStatus Row status of the table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.5.4.1.2

Support DHCP lan2lan to prevent DHCP service hack 
if customer installed DHCP server in its subscriber network. 
This table is supported by R5.05 and later versions.

dhcpSnoopLan2lanEntry row .1.3.6.1.4.1.890.1.5.13.5.1.5.6.1

The entry of dhcpSnoopLan2lanTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dhcpSnoopLan2lanEnable Enable/disable DHCP server on subscriber port	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.5.6.1.1

This table is supported by R1.03 and later versions.

aclSetEntry row .1.3.6.1.4.1.890.1.5.13.5.1.6.1.1

An entry of aclSetTable.

Indexes

RFC1213-MIBifIndex aclSetVpi aclSetVci aclSetProfileName

Column	Syntax	OID
aclSetVpi VPI value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.1
aclSetVci VCI value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.2
aclSetProfileName ACL Profile name.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.3
aclSetRowStatus RowStatus of aclSetEntry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.6.1.1.4

This table is supported by R5.02 and later versions.

aclNoMatchEntry row .1.3.6.1.4.1.890.1.5.13.5.1.6.2.1

An entry of aclNoMatchTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
aclNoMatchAction Pass or drop the packet.	Enumerationr/w Enumerated Values: 1 accept 2 deny	.1.3.6.1.4.1.890.1.5.13.5.1.6.2.1.1

A table that contains PPPoE DHCP Relay configuration.
This table is supported by R1.03 and later versions.

pppoeAgentEntry row .1.3.6.1.4.1.890.1.5.13.5.1.7.1.1

An entry of pppoeAgentTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
pppoeAgentEnable Enable/disable DHCP relay and Option82 function.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.1
pppoeAgentInfo User specific Option82 information.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.2
pppoeAgentRowStatus Row status of the table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.3
pppoeAgentOptionMode	Enumerationr/w Enumerated Values: 1 private 2 tr101 3 tr101PlusVlanInfo	.1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.4
pppoeAgentLineCharEnable Enable/disable option 82 sub-option line characteristic information.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.5
pppoeAgentLineCharMode rate: only bitrate information. full: full line characteristic information.	Enumerationr/w Enumerated Values: 1 rate 2 full	.1.3.6.1.4.1.890.1.5.13.5.1.7.1.1.6

A table that contains downstream broadcast forbidden configuration.
This table is supported by R3.00 and later versions.

dsBcastEntry row .1.3.6.1.4.1.890.1.5.13.5.1.8.1.1

An entry of dsBcastTable.

Indexes

RFC1213-MIBifIndex Q-BRIDGE-MIBdot1qVlanIndex

Column	Syntax	OID
dsBcastRowStatus Row status of the table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.8.1.1.1

The table contains DSCP mapping configuration.

dscpMappingEntry row .1.3.6.1.4.1.890.1.5.13.5.1.10.1.1

An entry of dscpMappingTable.

Indexes

dscpMappingSrcCodePoint

Column	Syntax	OID
dscpMappingSrcCodePoint The DSCP source code point used for mapping.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.10.1.1.1
dscpMappingMapPriority The mapping p bits that will replace the source p bits in the incoming packet.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.13.5.1.10.1.1.2

The table contains DSCP port configuration.

dscpPortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.10.2.1

An entry of dscpPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dscpPortEnable Enable/disable DSCP.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.10.2.1.1

A table that contains subnet vlan configuration.

subnetvlanEntry row .1.3.6.1.4.1.890.1.5.13.5.1.14.2.1

The entry of subnet vlan table.

Indexes

subnetvlanIp subnetvlanMask subnetvlanVid subnetvlanPriority

Column	Syntax	OID
subnetvlanIp	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.1
subnetvlanMask	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.2
subnetvlanVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.3
subnetvlanPriority	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.4
subnetvlanName	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.5
subnetvlanRowStatus Row status of the table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.14.2.1.6

A table that contains IPv4/IPv6 subnet vlan configuration.

subnetvlanInetEntry row .1.3.6.1.4.1.890.1.5.13.5.1.14.3.1

The entry of subnet vlan inet table.

Indexes

subnetvlanInetAddrType subnetvlanInetAddr subnetvlanInetMask subnetvlanInetVid subnetvlanInetPriority

Column	Syntax	OID
subnetvlanInetAddrType	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.1
subnetvlanInetAddr	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.2
subnetvlanInetMask	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.3
subnetvlanInetVid	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.4
subnetvlanInetPriority	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.5
subnetvlanInetName	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.6
subnetvlanInetRowStatus Row status of the table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.1.14.3.1.7

A table that contains Loopguard configuration.

loopguardEntry row .1.3.6.1.4.1.890.1.5.13.5.1.15.1.1

The entry of Loopguard table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
loopguardStatus	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.15.1.1.1
loopguardMode	Enumerationr/w Enumerated Values: 0 fix 1 dynamic	.1.3.6.1.4.1.890.1.5.13.5.1.15.1.1.2
loopguardRecoverTime seconds	Integer32r/w Constraints: range: 60-600	.1.3.6.1.4.1.890.1.5.13.5.1.15.1.1.3

A table that contains UsStorm configuration.

usStormEntry row .1.3.6.1.4.1.890.1.5.13.5.1.16.1.1

The entry of UsStorm table.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
usStormBcastThresh 0~1488096 pkt/s, -1 means no limit	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.16.1.1.1
usStormMcastThresh 0~1488096 pkt/s, -1 means no limit	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.16.1.1.2
usStormUcastThresh 0~1488096 pkt/s, -1 means no limit	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.1.16.1.1.3

Support ARP inspection to filter unauthorized ARP packets on the network. 
This can prevent many kinds of man-in-the-middle attacks. 
This table is supported by R5.05 and later versions.

arpInspectionEntry row .1.3.6.1.4.1.890.1.5.13.5.1.17.1.1

The entry of arpInspectionTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
arpInspectionEnable Enable/disable arp inspection on the specified subscriber port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.17.1.1.1

This table includes dhcpv6relay port configuration.

dhcpv6RelayPortEntry row .1.3.6.1.4.1.890.1.5.13.5.1.19.3.1

An entry in dhcpv6RelayPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
dhcpv6RelayOptLdraPortPolicy drop: drop the packet when a DHCPv6 message that already contains relay-forward header. replace: replace the original relay information when a DHCPv6 message that already contains one. keep: keep the original relay info…	Enumerationr/w Enumerated Values: 1 drop 2 replace 3 keep 4 add	.1.3.6.1.4.1.890.1.5.13.5.1.19.3.1.1

This table includes bpdu ctrl enable/disable for each port.

bpduEntry row .1.3.6.1.4.1.890.1.5.13.5.1.20.1.1

An entry in bpduenableTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
bpductrlenable Enable/Disable BpduCtrl.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.1.20.1.1.1

This table includes alarm configuration.

alarmConfEntry row .1.3.6.1.4.1.890.1.5.13.5.2.2.1

An entry in alarmConfTable.

Indexes

alarmConfId

Column	Syntax	OID
alarmConfId 3: dslLineUp 4: dslLineDown 7: dslLineLdmStart 8: dslLineLdmDone 9: dslLinePowerDownL2 10:dslLinePowerDownL0 11:dslLineFailure 14:adslPerfLolThresh 17:adslPerfLofThresh 18:adslPerfLosThresh 19:adslPerfLprThresh 20:adslP…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.2.1.1
alarmConfFacility Alarm facility.	Enumerationr/w Enumerated Values: 0 local0 1 local1 2 local2 3 local3 4 local4 5 local5 6 local6 7 local7	.1.3.6.1.4.1.890.1.5.13.5.2.2.1.2
alarmConfTarget The destination which alarms are reported to. Set the bit to 1 to enable the target. BIT 1: snmp trap BIT 2: syslog	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.2.1.3
alarmConfSeverity Alarm severity	Enumerationr/w Enumerated Values: 1 critical 2 major 3 minor 4 info	.1.3.6.1.4.1.890.1.5.13.5.2.2.1.4
alarmConfClearable Setting the object to one indicates that the alarm is to be cleared when user submits alarm clear.	Enumerationr/w Enumerated Values: 1 clearable 2 unclearable	.1.3.6.1.4.1.890.1.5.13.5.2.2.1.5

This table includes current alarm information.

alarmCurrEntry row .1.3.6.1.4.1.890.1.5.13.5.2.3.1

An entry in alarmCurrTable.

Indexes

alarmCurrIndex

Column	Syntax	OID
alarmCurrIndex Index of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.1
alarmCurrOccurTime Alarm occurence time (in hundredths of a second) since the system was last re-initialized.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.2
alarmCurrTrapOid Trap OID of the alarm.	ObjectIdentifier	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.3
alarmCurrParam1 The 1st parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.4
alarmCurrParam2 The 2nd parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.5
alarmCurrParam3 The 3rd parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.6
alarmCurrParam4 The 4th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.7
alarmCurrParam5 The 5th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.8
alarmCurrParam6 The 6th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.9
alarmCurrParam7 The 7th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.10
alarmCurrParam8 The 8th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.11
alarmCurrTimeDescr The string representation of occurence time (YYYY/MM/DD HH:MM:SS).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.12
alarmCurrSeverity The severity of the alarm.	Enumeration Enumerated Values: 1 critical 2 major 3 minor 4 info	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.13
alarmCurrDescr The description of the alarm.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.2.3.1.14

This table includes the configuration of alarm reporting severity threshold for each port.

alarmSeverityPortEntry row .1.3.6.1.4.1.890.1.5.13.5.2.4.1

An entry in alarmSeverityPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
severityThresh The minimum alarm severity that is reported.	Enumerationr/w Enumerated Values: 1 critical 2 major 3 minor 4 info	.1.3.6.1.4.1.890.1.5.13.5.2.4.1.1

This table includes the configuration of external alarms.

externalAlarmEntry row .1.3.6.1.4.1.890.1.5.13.5.2.5.1

An entry in externalAlarmTable.

Indexes

externalAlarmIndex

Column	Syntax	OID
externalAlarmIndex The external alarm index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.5.1.1
externalAlarmName The external alarm name.	RFC1213-MIBDisplayStringr/w	.1.3.6.1.4.1.890.1.5.13.5.2.5.1.2

This table that contains alarm history data.
This table is supported by R5.05 and later versions.

alarmHisEntry row .1.3.6.1.4.1.890.1.5.13.5.2.7.1

An entry in alarmHisTable.

Indexes

alarmHisIndex

Column	Syntax	OID
alarmHisIndex Index of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.1
alarmHisOccurTime Alarm occurence time (in hundredths of a second) since the system was last re-initialized.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.2
alarmHisTrapOid Trap OID of the alarm.	ObjectIdentifier	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.3
alarmHisParam1 The 1st parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.4
alarmHisParam2 The 2nd parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.5
alarmHisParam3 The 3rd parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.6
alarmHisParam4 The 4th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.7
alarmHisParam5 The 5th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.8
alarmHisParam6 The 6th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.9
alarmHisParam7 The 7th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.10
alarmHisParam8 The 8th parameter of the alarm.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.11
alarmHisTimeDescr The string representation of occurence time (YYYY/MM/DD HH:MM:SS).	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.12
alarmHisSeverity The severity of the alarm.	Enumeration Enumerated Values: 1 critical 2 major 3 minor 4 info	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.13
alarmHisDescr The description of the alarm.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.2.7.1.14

Perform specified MLT relay function, or turn off 
MLT relay function in specified subscriber.

mltRelayEntry row .1.3.6.1.4.1.890.1.5.13.5.4.4.6.1

An entry of mltRelayTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
mltRelaySet By default, relay function is turned off.	Enumerationr/w Enumerated Values: 1 in 2 out 3 both 4 off	.1.3.6.1.4.1.890.1.5.13.5.4.4.6.1.1
mltRelayTimeout Relays will be turned off automatically while the specified timer is timeout. This object is supported by R5.01 and later versions.	minuteInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.890.1.5.13.5.4.4.6.1.2
mltRelayForce Set to 1 to force to set relays even the port is in use. This object is supported by R5.01 and later versions.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.4.4.6.1.3

The table xdsl2ExtSCStatusTable extends xdsl2SCStatusTable for 
ZyXEL product.

xdsl2ExtSCStatusEntry row .1.3.6.1.4.1.890.1.5.13.5.4.8.1.1

The table xdsl2ExtSCStatusTable contains extra subcarrier
status parameters besides those in xdsl2LineSegmentTable.

Indexes

RFC1213-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusDirection

Column	Syntax	OID
xdsl2SCStatusActAtp Actual Aggregate Transmit Power Downstream. The total amount of transmit power delivered by the xTU-C at the U-C reference point, at the instant of measurement. It ranges from -310 to 310 units of 0.1 dBm (Physical va…	0.1 dBmInteger32 Constraints: range: -310-310 range: 2147483647-2147483647	.1.3.6.1.4.1.890.1.5.13.5.4.8.1.1.1

The table xdsl2ExtSCStatusBandTable extends xdsl2SCStatusBandTable for 
ZyXEL product.

xdsl2ExtSCStatusBandEntry row .1.3.6.1.4.1.890.1.5.13.5.4.8.2.1

The table xdsl2ExtSCStatusBandTable contains extra subcarrier
status parameters that are grouped per-band besides those in
xdsl2SCStatusBandTable.

Indexes

RFC1213-MIBifIndex VDSL2-LINE-MIBxdsl2SCStatusBand

Column	Syntax	OID
xdsl2SCStatusBandSnrMargin SNR Margin is the maximum increase in dB of the noise power received at the xTU (xTU-R for a band in the downstream direction and xTU-C for a band in the upstream direction), such that the BER requirements are met for a…	0.1 dBInteger32 Constraints: range: -640-630 range: 2147483646-2147483647	.1.3.6.1.4.1.890.1.5.13.5.4.8.2.1.1

A table that contains information about static routes.

staticRouteEntry row .1.3.6.1.4.1.890.1.5.13.5.5.1.2.1

A list of static route entry.

Indexes

staticRouteName

Column	Syntax	OID
staticRouteName The name of the static route.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.1
staticRouteDest The destination IP address of the static route.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.2
staticRouteMask The subnet mask of the static route.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.3
staticRouteGateway The gateway IP address of the static route.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.4
staticRouteMetric The routing metric of the static route.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.5
staticRouteRowStatus This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', , and is deactivated by setting it to 'notInService'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.5.1.2.1.6

The table which contains the chassis information in the system.

chassisEntry row .1.3.6.1.4.1.890.1.5.13.5.6.2.1

Indexes

chassisId

Column	Syntax	OID
chassisId The Chassis ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.6.2.1.1
chassisFrameNumber The Frame ID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.6.2.1.2
chassisSerialNumber The Chassis Serial Number.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.2.1.3
chassisNumber The Chassis Number which is defined by the system administrator for management purpose.	Integer32r/w Constraints: range: 1-64	.1.3.6.1.4.1.890.1.5.13.5.6.2.1.4
chassisStatus The current status of the chassis.	Enumeration Enumerated Values: 1 empty 2 up 3 down 4 testing	.1.3.6.1.4.1.890.1.5.13.5.6.2.1.5

The table which contains the slot information in a chassis.

slotEntry row .1.3.6.1.4.1.890.1.5.13.5.6.3.1

Indexes

chassisId slotId

Column	Syntax	OID
slotId Identity of the slot.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.1
slotModuleType Card type of the plug-in card.	Enumeration Enumerated Values: 1 unknown 101 msc1000G 102 alc1248G_51 103 alc1248G_53 104 slc1248G_22 105 vlc1224G_41 106 msc1024G 107 alc1272G_51 108 vop1248G_61_SIP 109 msc1000GA 110 vlc1324G_51 111 msc1224G 112 vop1248G_61_H248 113 vlc1348G_51 114 elc1220G_55 115 msc1024GA 116 vlc1324G_53 117 ima1408G_81 118 vlc1424G_56 119 slc1348G_22 120 vlc1348G_53 121 alc1372G_51 122 msc1024GB 123 msc1224GB 124 vop1372G_61_H248 125 msc1024GC 126 glc1320G_55 127 vop1372G_61_SIP 128 alc1348G_51C 129 alc1348G_51C_H248 130 msc1224gc	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.2
slotModuleDescr The descriptions of the plug-in card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.3
slotModuleFWVersion The firmware version of the plug-in card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.4
slotModuleDriverVersion The DSL driver of the plug-in card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.5
slotModuleModemCodeVersion The DSL modem code version of the plug-in card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.6
slotModuleStatus The module state of the plug-in card.	Enumeration Enumerated Values: 1 empty 2 up 3 down 4 testing 5 standby	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.7
slotModuleAlarmStatus This variable indicates the alarm status of the module. It is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.8
slotModuleSerialNumber The serial number of the plug-in card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.9
slotModuleHWVersion The hardware version of the plug-in card.	RFC1213-MIBDisplayString	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.10
slotModuleUpTime The time (in seconds) since the plug-in card was last re-initialized.	secondSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.6.3.1.11
slotModuleMacAddress The MAC Address of the plug-in card.		.1.3.6.1.4.1.890.1.5.13.5.6.3.1.12
slotModuleMacAddress2 The MAC Address of the plug-in card.		.1.3.6.1.4.1.890.1.5.13.5.6.3.1.13

The table contains MSC port status.

mscPortEntry row .1.3.6.1.4.1.890.1.5.13.5.6.4.1

Indexes

chassisId slotId mscPortId

Column	Syntax	OID
mscPortId Identity of the MSC port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.6.4.1.1
mscPortType Type of the MSC port.	Enumeration Enumerated Values: 1 unknown 2 e1000BaseT 3 e1000BaseLX 4 e1000BaseSX 5 e100BaseFX 6 e100BaseTX 7 e1000BaseGBIC 8 e10000BaseGBIC	.1.3.6.1.4.1.890.1.5.13.5.6.4.1.2

A table that contains static multicast group information.

mcastGroupEntry row .1.3.6.1.4.1.890.1.5.13.5.7.2.2.1

The entry of multicast group table.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex mcastGroupIp

Column	Syntax	OID
mcastGroupIp The multicast IP address of the group.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.1
mcastGroupFixedPorts The port list which specify the ports joining the multicast group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.2
mcastGroupForbiddenPorts The port list which specify the ports prohibited by the multicast group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.3
mcastGroupRowStatus The row status of the multicast group entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.7.2.2.1.4

This table specify the static multicast group with MAC address.
This table is supported by R5.02 and later versions.

macMcastGroupEntry row .1.3.6.1.4.1.890.1.5.13.5.7.2.4.1

An entry of macMcastGroupTable.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex macMcastGroupMac

Column	Syntax	OID
macMcastGroupMac The multicast MAC address of the group.	RFC1213-MIBPhysAddress	.1.3.6.1.4.1.890.1.5.13.5.7.2.4.1.1
macMcastGroupFixedPorts The port list which specify the ports joining the multicast group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.5.7.2.4.1.2
macMcastGroupRowStatus The row status of the MAC multicast group entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.7.2.4.1.3

A table that contains static multicast group information.

mcastInetGroupEntry row .1.3.6.1.4.1.890.1.5.13.5.7.2.5.1

The entry of multicast group table.

Indexes

Q-BRIDGE-MIBdot1qVlanIndex mcastGroupInetAddrType mcastGroupInetAddr

Column	Syntax	OID
mcastGroupInetAddrType The multicast IP address type of the group.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.1
mcastGroupInetAddr The multicast IP address of the group.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.2
mcastGroupInetFixedPorts The port list which specify the ports joining the multicast group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.3
mcastGroupInetForbiddenPorts The port list which specify the ports prohibited by the multicast group.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.4
mcastGroupInetRowStatus The row status of the multicast group entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.7.2.5.1.5

A table that contains IGMP filters.

igmpFilterEntry row .1.3.6.1.4.1.890.1.5.13.5.7.3.2.1

The entry of IGMP filter table.

Indexes

igmpFilterName igmpFilterIndex

Column	Syntax	OID
igmpFilterName The IGMP filter name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.1
igmpFilterIndex The index which specif the filter rule.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.2
igmpFilterStartIp The start IP of the filter rule.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.3
igmpFilterEndIp The end IP of the filter rule.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.4
igmpFilterRowStatus The row status of the IGMP filter entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.5
igmpFilterInetAddrType The IP Address type.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.6
igmpFilterInetAddrStart The start IP of the filter rule.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.7
igmpFilterInetAddrEnd The end IP of the filter rule.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.890.1.5.13.5.7.3.2.1.8

This table specif the IGMP filter of the port.

igmpFilterPortEntry row .1.3.6.1.4.1.890.1.5.13.5.7.3.3.1

An entry in igmpFilterPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
igmpFilterPortFilterName The IGMP filter name of the port.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.890.1.5.13.5.7.3.3.1.1

This table defines bandwidth budget for a range of multicast IP channels.
This table is supported by R1.02 and later versions.

mcastBwEntry row .1.3.6.1.4.1.890.1.5.13.5.7.4.3.1

An entry of mcastBwTable.

Indexes

mcastBwIndex mcastBwStartIp mcastBwEndIp

Column	Syntax	OID
mcastBwIndex The index which specify the entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.1
mcastBwStartIp The start multicast IP of the bandwidth control range.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.2
mcastBwEndIp The end multicast IP of the bandwidth control range.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.3
mcastBwBandwidth The bandwidth budget for the multicast IP channels.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.4
mcastBwRowStatus The row status of the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.890.1.5.13.5.7.4.3.1.5

This table specify the multicast bandwidth control of the port.
This table is supported by R1.02 and later versions.

mcastBwPortEntry row .1.3.6.1.4.1.890.1.5.13.5.7.4.4.1

An entry of mcastBwPortTable.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
mcastBwPortEnable Enable/disable multicast bandwidth control for a port.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.890.1.5.13.5.7.4.4.1.1
mcastBwPortBandwidth Set bandwidth threshold for a port.	KbpsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.890.1.5.13.5.7.4.4.1.2