vdslLineConfGinpRtxModeUs
ZYXEL-IES5000-MIB ·
.1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.45
Object
column
r/w
Xdsl2ConfigRtxMode
G.inp(G.998.4) support setting on upstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4).
Context
- MIB
- ZYXEL-IES5000-MIB
- OID
.1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.45- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vdslLineConfEntry
- Table
- vdslLineConfTable
- Siblings
- 92
Syntax
Xdsl2ConfigRtxMode
- Source
- Xdsl2ConfigRtxMode
- Base type
Enumeration
Values & Constraints
Type Values
0 | forbidden |
1 | preferred |
2 | forced |
3 | test |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vdslLineConfUpbo Enable/disable upstream power backoff control. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.1 |
| vdslLineConfPsdShape This object is supported by R5.01 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.10 |
| vdslLineConfDpbo This object is supported by R5.01 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.11 |
| vdslLineConfDpboParamEsel This object is supported by R5.01 and later versions. | column | 0.5dB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.12 |
| vdslLineConfDpboParamEscma -1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions. | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.13 |
| vdslLineConfDpboParamEscmb -1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions. | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.14 |
| vdslLineConfDpboParamEscmc -1~-1.5 in step of 1/256. This object is supported by R5.01 and later versions. | column | Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.15 |
| vdslLineConfDpboParamMus This object is supported by R5.01 and later versions. | column | -0.5 dBm/Hz Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.16 |
| vdslLineConfDpboParamFmin This object is supported by R5.01 and later versions. | column | 4.3125kHz Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.17 |
| vdslLineConfDpboParamFmax This object is supported by R5.01 and later versions. | column | 4.3125kHz Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.18 |
| vdslLineConfDpboParamPsdId Always return 0 when read. This object is supported by R5.01 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.19 |
| vdslLineConfVdslProfile Set VDSL profile. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.2 |
| vdslLineConfCompatible Compatible to spectrum usage of adsl2 or adsl2+ line. The object is supported by R5.02 and later versions. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.20 |
| vdslLineConfPowerMode The power mode of the VDSL line. This MIB object is supported by R5.05 and later versions.
1: fix
2: priorityToPower
3: priorityToRate | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.21 |
| vdslLineConfVturMaxTxPower The maximum allowed transmit power of VTU-R.
-130~200 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.22 |
| vdslLineConfVtucMaxTxPower The maximum allowed transmit power of VTU-C.
-50~200 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.23 |
| vdslLineConfMaxRxPower The maximum aggregate received power.
-255~255 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.24 |
| vdslLineConfPMask To configure a bit mask to select preferred protocols :
0x00000001~0xffffffff
0x00000001 G.992.1 A|B
0x00000002 G.992.2 A
0x00000004 G.992.3 A|B
0x00000010 G.992.5 A|B
0x00000020 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.25 |
| vdslLineConfAturCarrierMask Sub-carrier masking for ADSL2+ fallback,
Upstream sub-carrier mask. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.26 |
| vdslLineConfAtucCarrierMask0 Sub-carrier masking for ADSL2+ fallback,
Downstream sub-carrier mask. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.27 |
| vdslLineConfAtucCarrierMask1 Sub-carrier masking for ADSL2+ fallback,
Downstream sub-carrier mask. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.28 |
| vdslLineConfSnrModeDs To enable the transmitter referred virtual noise in the downstream direction.
1: enable(1)
2: disable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.29 |
| vdslLineConfFrequencyPlan Set VDSL frequency plan. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.3 |
| vdslLineConfSnrModeUs To enable the transmitter referred virtual noise in the upstream direction.
1: enable(1)
2: disable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.30 |
| vdslLineConfTxRefVnDs To configure downstream transmitter referred virtual noise. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.31 |
| vdslLineConfTxRefVnUs To configure upstream transmitter referred virtual noise. | column | OctetString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.32 |
| vdslLineConfTpstcTypeAdsl TPS-TC type for ADSL mode VLC.
1: atm(1)
2: ptm(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.33 |
| vdslLineConfTpstcTypeVdsl TPS-TC type for VDSL mode VLC.
1: atm(1)
2: ptm(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.34 |
| vdslLineConfVturInmEq The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of computation of
Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.35 |
| vdslLineConfVtucInmEq The INM Inmpulse Noise Protection Equivalent Mode.
Configuration parameter INM_INPEQ_MODE defines the way of computation of
Equivalent INP, as defined in ITU-T G.993.2 Amd2 11.4… | column | Unsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.36 |
| vdslLineConfInmVturCC The INM Cluster Continuation. The valid values for INMCC range from 0 from
64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded
symbols will be allowed… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.37 |
| vdslLineConfInmVtucCC The INM Cluster Continuation. The valid values for INMCC range from 0 from
64 DMT symbols in steps of 1 DMT symbol. Up to and including INMCC nondegraded
symbols will be allowed… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.38 |
| vdslLineConfInmVturIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values
for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.39 |
| vdslLineConfRfiBand Set VDSL customized RFI configuration.
disable: not apply RFI notch to port
ansi: use pre-defined ANSI RFI notch
etsi: use pre-defined ETSI notch
custom: user needs to define cust… | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.4 |
| vdslLineConfInmVtucIATO The INM Inter Arrival Time Offset for the IAT anomaly generation. The valid values
for INMIATO range from 3 from 511 DMT symbols in steps of 1 DMT symbol. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.40 |
| vdslLineConfInmVturIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for
INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded
in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.41 |
| vdslLineConfInmVtucIATS The INM Inter Arrival Time Step for the IAT anomaly generation. The valid values for
INMIATS range from 0 from 7 in steps. The range of values of inter-arrival times recorded
in… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.42 |
| vdslLineConfInmVtucISDBUS ISDD sensitivity of VTU-C,-128~127 in unit of 0.1dB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.43 |
| vdslLineConfGinpRtxModeDs G.inp(G.998.4) support setting on downstream direction. The possible values are:
Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-e… | column | Xdsl2ConfigRtxMode | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.44 |
| vdslLineConfGinpEtrMaxDs Defines the maximum allowed value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.46 |
| vdslLineConfGinpEtrMaxUs Defines the maximum allowed value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.47 |
| vdslLineConfGinpEtrMinDs Defines the minimum value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.48 |
| vdslLineConfGinpEtrMinUs Defines the minimum value for the ETR (Effective Throughput Rate). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.49 |
| vdslLineConfIpqosProfile | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.5 |
| vdslLineConfGinpNdrMaxDs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.50 |
| vdslLineConfGinpNdrMaxUs Overrules the wanted maximum data rate provided in the SetLineTrafficConfiguration | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.51 |
| vdslLineConfGinpShineRatioDs The assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.52 |
| vdslLineConfGinpShineRatioUs The assumed fraction (0.001 to 0.255) of NDR necessary to correct SHINE noise. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.53 |
| vdslLineConfGinpLeftrThresholdDs The rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.54 |
| vdslLineConfGinpLeftrThresholdUs The rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.55 |
| vdslLineConfGinpMaxDelayDs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.56 |
| vdslLineConfGinpMaxDelayUs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.57 |
| vdslLineConfGinpMinDelayDs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.58 |
| vdslLineConfGinpMinDelayUs G.inp-specific value that overrules the traffic configuration setting. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.59 |
| vdslLineConfVturInp This object is supported by R5.01 and later versions. | column | 0.1 DTM symbol Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.6 |
| vdslLineConfGinpInpMinDs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-31 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.60 |
| vdslLineConfGinpInpMinUs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-31 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.61 |
| vdslLineConfGinpReinCfgInpDs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.62 |
| vdslLineConfGinpReinCfgInpUs G.inp-specific value that overrules the traffic configuration setting. Unit is symbol.
The possible values are: 0-7 | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.63 |
| vdslLineConfGinpReinCfgFreqDs G.inp-specific value that overrules the traffic configuration setting. Unit is Hz.
The possible values are:
100 - 100Hz
120 - 120Hz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.64 |
| vdslLineConfGinpReinCfgFreqUs G.inp-specific value that overrules the traffic configuration setting. Unit is Hz.
The possible values are:
100 - 100Hz
120 - 120Hz | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.65 |
| vdslLineConfSosMinRateB0Ds This parameter specifies the minimum net data rate required for a valid SOS request
in the downstream direction. The value shall be coded as an unsigned integer representing
the… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.66 |
| vdslLineConfSosMinRateB0Us This parameter specifies the minimum net data rate required for a valid SOS request
in the upstream direction. The value shall be coded as an unsigned integer representing
the d… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.67 |
| vdslLineConfSosTimeDs The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2).
If the value of this parameter is not zero, the standard SOS triggering… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.68 |
| vdslLineConfSosTimeUs The parameter SOS-TIME-ds is used in the specification of the receiver initiated SOS (see 13.4.3/G.993.2).
If the value of this parameter is not zero, the standard SOS triggering… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.69 |
| vdslLineConfVtucInp This object is supported by R5.01 and later versions. | column | 0.1 DTM symbol Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.7 |
| vdslLineConfSosCrcDs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds
in order to arm the second sub condition of the standard SOS triggerin… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.70 |
| vdslLineConfSosCrcUs This parameter is defined as the minimum number of normalized CRC anomalies received in SOS-TIME-ds seconds
in order to arm the second sub condition of the standard SOS triggerin… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.71 |
| vdslLineConfSosNToneDs This parameter is defined as the minimum percentage of tones in the downstream MEDLEY SET that must be
degraded in order to arm the first sub-condition of the standard SOS trigge… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.72 |
| vdslLineConfSosNToneUs This parameter is defined as the minimum percentage of tones in the upstream MEDLEY SET that must be
degraded in order to arm the first sub-condition of the standard SOS triggeri… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.73 |
| vdslLineConfSosMaxDs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures
in the downstream direction performed within a 120-second interva… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.74 |
| vdslLineConfSosMaxUs This parameter is used in G.993.2 de-activation (see 12.1.4/G.993.2). If the number of successful SOS procedures
in the upstream direction performed within a 120-second interval … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.75 |
| vdslLineConfRocEnableDs Enable the robust overhead channel.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.78 |
| vdslLineConfRocEnableUs Enable the robust overhead channel.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.79 |
| vdslLineConfOptionMask This object is supported by R5.01 and later versions.
Bit1: disable Trellis coding in ADSL mode
Bit2: disable Reed-Solomon coding for ADSL
Bit3: disable upstream bitswaps
Bit4: di… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.8 |
| vdslLineConfRocSnrmDs The parameter is defined as the SNR margin offset for the ROC channel in
the downstream direction. The parameter is used in the specification of the
channel initialization polic… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.80 |
| vdslLineConfRocSnrmUs The parameter is defined as the SNR margin offset for the ROC channel in
the upstream direction. The parameter is used in the specification of the
channel initialization policy … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.81 |
| vdslLineConfRocMinInpDs This parameter contains the minimum impulse noise protection to apply on the ROC
in the downstream direction. The minimum impulse noise protection is an integer ranging from 0 to… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.82 |
| vdslLineConfRocMinInpUs This parameter contains the minimum impulse noise protection to apply on the ROC
in the upstream direction. The minimum impulse noise protection is an integer ranging from 0 to 1… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.83 |
| vdslLineConfSosEnableDs Enable the emergency rate reduction.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.84 |
| vdslLineConfSosEnableUs Enable the emergency rate reduction.
disable(1),
enable(2) | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.85 |
| vdslLineConfDynamicDepthDs Enable the dynamic change of interleave depth. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.86 |
| vdslLineConfDynamicDepthUs Enable the dynamic change of interleave depth. | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.87 |
| vdslLineConfDpboParamType | column | Enumeration | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.88 |
| vdslLineConfDpboParamEselMin | column | 0.5 dB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.89 |
| vdslLineConfUpboForceLength -1 means auto electric length. This object is supported by R5.01 and later versions. | column | 0.1dB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.9 |
| vdslLineConfHsTxA43Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.90 |
| vdslLineConfHsTxB43Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.91 |
| vdslLineConfHsTxA43cB43cPsd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.92 |
| vdslLineConfHsTxV43Carrier257Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.93 |
| vdslLineConfHsTxV43Carrier383Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.94 |
| vdslLineConfHsTxV43Carrier511Psd | column | dB/HzB Integer32 | .1.3.6.1.4.1.890.1.5.13.5.8.10.1.1.95 |